2015-07-22 Update: added the Lollipop logo file.
Hello,
This file is simply the XT1045 US retail 4.4.3 (21.23.4.peregrine_retus.retus.en.US retus) mmcblk0p27 partition dumped, cropped of about 3 MB of null content, and modified (as per this thread) so that those of us here with unlocked bootloaders aren't required to stare at the original ominous legalese, which we've agreed to anyway.
Decompress and install with:
Code:
fastboot flash logo peregrine_logo_mod.bin
Those who want a recovery-flashable zip are free to head over to @ffosilva's thread and make one based on his.
Enjoy,
Darkshado
I have 4G XT1039 (EU). I've downloaded the stock firmware RET-EU-SS_4.4.3_KXB21.14-L1.31. Should I use fastboot flash logo from the stock firmware or from the file you have provided? Will it work / is there any difference? Thanks.
EDIT: Yours worked fine. I gather XT1045 is almost identical except for 4G/LTE bands.
EDIT2: I have flashed the logo.bin file located in the zip's from these logos. Includes the stock and others. http://forum.xda-developers.com/showthread.php?t=2686441
vpnair said:
EDIT: Yours worked fine. I gather XT1045 is almost identical except for 4G/LTE bands.
EDIT2: I have flashed the logo.bin file located in the zip's from these logos. Includes the stock and others. http://forum.xda-developers.com/showthread.php?t=2686441
Click to expand...
Click to collapse
Very helpful thanks for the info got it working on my XT1039
Confirmed working!
thnx
:good: Nice, thanks for the tip Darkshado. Went with a logo from the thread vpnair linked, worked like a charm.
XT1045 working great, now how about some TWRP/CWM and custom ROMS for this badboy !!
rawtek said:
XT1045 working great, now how about some TWRP/CWM and custom ROMS for this badboy !!
Click to expand...
Click to collapse
Have a look in the forum. There are TWRP and CWM recoveries now available.
this works perfectly. Thank you.
Would this work even if i am on 4.4.4?
EDIT:
Never mind, worked...great job. Thanks
Thx. Worked on my german version of moto g lte with 4.4.4.
I have rooted my moto g 4g xt1039 uk and got cwm
I used fastboot. Here it says mfastboot is that a different way to do it?
Not quite sure.
martinisok said:
I have rooted my moto g 4g xt1039 uk and got cwm
I used fastboot. Here it says mfastboot is that a different way to do it?
Not quite sure.
Click to expand...
Click to collapse
I did it with fastboot and it worked fine.
Updated the OP with the updated Lollipop logo
Looks way better, thank you.
works perfectly
Worked perfectly on my peregrine with the 5.1 file! Thank you.
Works well on my LP5.1 XT1039. Thanks:good:
plz reply
i have moto g 4g xt1039 with latest bootloader and baseband files
if i flash this will i have to wait the logo animation ?
i want to remove the warning and gain time , its useless to wait a longer animation !
ahmedteling said:
i want to remove the warning and gain time , its useless to wait a longer animation !
Click to expand...
Click to collapse
It's not possible. Bootloader will always display the logo.
Anyway to do that in cm14?
Here you go folks - just flash any one of these bootlogos in TWRP.
Related
Hey guys. So I got my dev edition today and of course, while trying to root it I broke it and can't get out of fastboot.
I'm trying to download the gsm factory img, but i'm still waiting on the download link from Moto. Anyone have a mirror?
Durkbeef said:
Hey guys. So I got my dev edition today and of course, while trying to root it I broke it and can't get out of fastboot.
I'm trying to download the gsm factory img, but i'm still waiting on the download link from Moto. Anyone have a mirror?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?t=2538394
Sent on my Moto X
flashallthetime said:
Here http://forum.xda-developers.com/showthread.php?t=2538394
Sent on my Moto X
Click to expand...
Click to collapse
Thanks for the reply. But the Dev edition isn't on that list.
Kinda starting to freak out at the moment.
http://sbf.droid-developers.org/ghost/list.php
Ok. I feel like a dumbass right now. ON that whole list, I don't see any dev edition model. Am I supposed to just flash the Tmo one?
Durkbeef said:
Ok. I feel like a dumbass right now. ON that whole list, I don't see any dev edition model. Am I supposed to just flash the Tmo one?
Click to expand...
Click to collapse
Yes, they are identical, tmobile uses the "retail" non branded version of firmware, same as the dev edition.
Steve-x said:
Yes, they are identical, tmobile uses the "retail" non branded version of firmware, same as the dev edition.
Click to expand...
Click to collapse
Thanks for the reply. I appreciate it.
I'm trying to add the file to RSDlite and it's saying it failed to create and that the file path was too long.
Any thoughts?
Durkbeef said:
Thanks for the reply. I appreciate it.
I'm trying to add the file to RSDlite and it's saying it failed to create and that the file path was too long.
Any thoughts?
Click to expand...
Click to collapse
You need to remove the getvar line completely from the XML file
Sent on my Moto X
flashallthetime said:
You need to remove the getvar line completely from the XML file
Sent on my Moto X
Click to expand...
Click to collapse
I deleted the line, put the file back into the .zip and tried again. same error.
Never mind! Fixed it. I was trying to flash the whole .zip. Didn't realize I only had to click on the xml file.
Can I use the Factory image from Motorola?
Hi Guys,
I've got the Fido/Rogers Moto x.
With a unlocked boot loader could I flash the GSM factory image from Motorola?
MOTO X, GSM Dev Edition:
KK 4.4-13.11.1Q2.X-69-3_MR2 (Retail)
Thank you
dharbot said:
Hi Guys,
I've got the Fido/Rogers Moto x.
With a unlocked boot loader could I flash the GSM factory image from Motorola?
MOTO X, GSM Dev Edition:
KK 4.4-13.11.1Q2.X-69-3_MR2 (Retail)
Thank you
Click to expand...
Click to collapse
Yep! There is chance you may lose band 7 LTE support though.
I know I'm a little late to this thread, but I can confirm that the T-mobile 4.4 retail version works flawlessly on Rogers Moto X with unlocked bootloader. LTE appears to be working fine with 50Mbps DL speed which is what I was getting on stock Rogers as well. Everything seems to be in order.
Thanks to everyone who participated in this thread to help me learn
Motorola Moto X 2Gen U.S Cellular XT1093 victara_usc
Android 5.0.2 system/boot twrp image.
BUILD:LXE22.46-33
download : https://www.androidfilehost.com/?fid=95916177934530437
not rooted, stock.
DO NOT MIRROR.
5.0.2...not on US Cellular, so I'm not going to mess with this. But can you tell if the camera2 api has been implemented? Because that would be fantastic.
when did 5.0.2 been released? we r still waiting for it on the pure edition XT1095
Been running the Chinese 5.0.2 stock ROM for a couple days. No real problems. I flashed PA Gapps to get Google services back, but no problems overall. Very curious to give this a try too... Anyone know if it'd be the same process (simply flash boot and system)?
Chinese ROM found here:
http://forum.xda-developers.com/showthread.php?t=3024024
tom1226 said:
5.0.2...not on US Cellular, so I'm not going to mess with this. But can you tell if the camera2 api has been implemented? Because that would be fantastic.
Click to expand...
Click to collapse
sorry i dont know
theone_s_me said:
when did 5.0.2 been released? we r still waiting for it on the pure edition XT1095
Click to expand...
Click to collapse
*System version
22.21.33.victara_usc.en.US usc
*Build number
LXE22.46-33
= Android 5.0.2
me too, wait XT1095 Android 5.0.2...
So, is it safe to flash this to xt1095?
mercado79 said:
So, is it safe to flash this to xt1095?
Click to expand...
Click to collapse
Yes is is safe. i just installed in my XT1095 and everything is working perfectly
---------- Post added at 01:31 PM ---------- Previous post was at 01:31 PM ----------
fnoji111 said:
Motorola Moto X 2Gen U.S Cellular XT1093 victara_usc
Android 5.0.2 system/boot twrp image.
BUILD:LXE22.46-33
download : https://www.androidfilehost.com/?fid=95916177934530437
not rooted, stock.
DO NOT MIRROR.
Click to expand...
Click to collapse
Thank you for the backup.... its working perfectly
The only thing annoying me is the us cellular boot animation... i will try changing it to stock now...
how to install this?
Sim unlock
Has anyone tried an gsm sim on the xt1093 lollipop
Thanks OP
Is this safe to flash in 1097?? Thanks.
naazirnizam said:
Has anyone tried an gsm sim on the xt1093 lollipop
Click to expand...
Click to collapse
yes me, but still simlock is there and asking about unlocking network code
yunior597 said:
how to install this?
Click to expand...
Click to collapse
Copy the directory in TWRP
data/media/0/TWRP/BACKUP/"your phone serial number "
Then go to recovery and make a Restore.
This is working in The moto XT1092 for european? Very thanks
Edit, ist working perffect for me moto XT1092 EUROPEAN, very thanks
Regards
Enviado desde mi Nexus 5 usando Tapatalk 2
Any answer on the Camera 2 API?
iron maiden said:
This is working in The moto XT1092 for european? Very thanks
Edit, ist working perffect for me moto XT1092 EUROPEAN, very thanks
Regards
Enviado desde mi Nexus 5 usando Tapatalk 2
Click to expand...
Click to collapse
What does ur system versino say? Can u show screenshot please?
Thanks
Any chance to get it working on brazilian retail XT1097?? Any reports?
Working perfect on xt1097 from Colombia, first transformed to a xt1097 from Brasil.
How to remove the us celular logo??
Thanks in advance.
EDIT: US Cellular logo removed succesfully.
But now I have a warning Activatng phone everytime I boot.
Is there a way to remove it?
Thanks again.
nerotix said:
What does ur system versino say? Can u show screenshot please?
Thanks
Click to expand...
Click to collapse
Hello, I'm from Spain, see Vodafone Es, its working very well for me model Moto original XT1092 ..sorry for no responding and my english ..
Regards
drziddo said:
Working perfect on xt1097 from Colombia, first transformed to a xt1097 from Brasil.
How to remove the us celular logo??
Thanks in advance.
EDIT: US Cellular logo removed succesfully.
But now I have a warning Activatng phone everytime I boot.
Is there a way to remove it?
Thanks again.
Click to expand...
Click to collapse
Flash the motorola boot animation of your preference, and you should be good with the warning!
drziddo said:
Working perfect on xt1097 from Colombia, first transformed to a xt1097 from Brasil. .
Click to expand...
Click to collapse
Are the Camer2 APIs there? If you fire up FV-5 does it allow you to save in raw format?
Hey,
I've been scowering the internet in search for:
Blur_Version.21.11.16.titan_retca.retca.en.CA
but have had no luck. If any could help me out that'd be great!
Thank you in Advance!
Animanny said:
Hey,
I've been scowering the internet in search for:
Blur_Version.21.11.16.titan_retca.retca.en.CA
but have had no luck. If any could help me out that'd be great!
Thank you in Advance!
Click to expand...
Click to collapse
Not really. And Blur is just an OTA-update. It won't help you to restore the device if you flashed another ROM.
But here's the full ROM (flashable through fastboot).
http://www.filefactory.com/file/1n8afkjpewdb/RETCA_XT1064_4.4.4_KXB21.85-24_cid14_CFC.xml.zip
doppelhelix said:
Not really. And Blur is just an OTA-update. It won't help you to restore the device if you flashed another ROM.
But here's the full ROM (flashable through fastboot).
http://www.filefactory.com/file/1n8afkjpewdb/RETCA_XT1064_4.4.4_KXB21.85-24_cid14_CFC.xml.zip
Click to expand...
Click to collapse
OH THANK YOU THANK YOU THANK YOU
but do you know if this is Lollipop? Or if it safe to flash this on a Lollipop device?
Animanny said:
OH THANK YOU THANK YOU THANK YOU
but do you know if this is Lollipop? Or if it safe to flash this on a Lollipop device?
Click to expand...
Click to collapse
Its KitKat.
But after you install the ROM, you should get the OTA for lollipop
I found a faster download (filefactory is like a snail):
https://mega.co.nz/#F!29RX1L6I!gfxcXgqkAhf5GDhr_aPGYg
And if you have TWRP as recovery, give The Titan Prime ROM a shot. Based on stock, better memory handling and debloated
doppelhelix said:
Its KitKat.
But after you install the ROM, you should get the OTA for lollipop
I found a faster download (filefactory is like a snail):
https://mega.co.nz/#F!29RX1L6I!gfxcXgqkAhf5GDhr_aPGYg
And if you have TWRP as recovery, give The Titan Prime ROM a shot. Based on stock, better memory handling and debloated
Click to expand...
Click to collapse
I am currently running Titan Prime but for some reason it won't recognize my SIM card saying "Error while searching for Network"
also on my original Moto G I tried downgrading from a Brazillian Soak Test back to KITKAT and I PERMA BRICKED THE PHONE
so is this safe? Wanna try for me
Animanny said:
I am currently running Titan Prime but for some reason it won't recognize my SIM card saying "Error while searching for Network"
also on my original Moto G I tried downgrading from a Brazillian Soak Test back to KITKAT and I PERMA BRICKED THE PHONE
so is this safe? Wanna try for me
Click to expand...
Click to collapse
There's always the chance of bricking the phone.
I went from kitkat to lollipop to kitkat to lollipop without problems ( I have a XT1068, flashed a XT1064 ROM, jumped to lollipop and went back to XT1068 kitkat. now running cm12.1.
I really tried hard but I couldn't brick the phone).
Once you are back to stock-kitkat and received the ota to lollipop, Titan Prime and every other lollirom should work like a charm.
doppelhelix said:
there's always the chance of bricking the phone.
I went from kitkat to lollipop to kitkat to lollipop without problems ( i have a xt1068, flashed a xt1064 rom, jumped to lollipop and went back to xt1068 kitkat. Now running cm12.1.
I really tried hard but i couldn't brick the phone).
Once you are back to stock-kitkat and received the ota to lollipop, titan prime and every other lollirom should work like a charm.
Click to expand...
Click to collapse
your right i fixed it thank you so much. I actually love you. May god bless your soul <3 <3
Hey there, I just wanted to share this for those who have unlocked bootloader and updated to Marshmallow. Simply extract logo.rar and flash it using the following command:
Code:
fastboot flash logo logo.bin
Otherwise, just flash marshmallow_logo.zip with custom recovery
Final result will look like image attached below
This is for all versions of the phone?
Do i flash it in twrp?
There is already a thread on Marshmallow bootlogo. Please close this thread.
Link to thread :- http://forum.xda-developers.com/201...er-warning-t3294590/post64833521#post64833521
This is twrp flashable moto logo and moto globe
https://mega.nz/#F!hR5Q3DRC!YFgQA0TJGpabKeCeUh4o5Q
This is Alberto97's file ,i think ( i downloaded more than 1 month back ,i forgot it )
drmuruga said:
This is twrp flashable moto logo and moto globe
https://mega.nz/#F!hR5Q3DRC!YFgQA0TJGpabKeCeUh4o5Q
Click to expand...
Click to collapse
Is it different/better than Marshmallow_bootlogo.zip?
guest_2011 said:
Is it different/better than Marshmallow_bootlogo.zip?
Click to expand...
Click to collapse
I don't know how to put photo in this post. But the logo was same as after marshmallow update of my osprey.
Just learnt
kulankit97 said:
There is already a thread on Marshmallow bootlogo. Please close this thread.
Link to thread :- http://forum.xda-developers.com/201...er-warning-t3294590/post64833521#post64833521
Click to expand...
Click to collapse
Sorry, I didn't know that thread existed
drmuruga said:
I don't know how to put photo in this post. But the logo was same as after marshmallow update of my osprey.
Just learnt
Click to expand...
Click to collapse
By any chance did you update via OTA?
Yes ,I update via ota.then do root.
drmuruga said:
Yes ,I update via ota.then do root.
Click to expand...
Click to collapse
That's why your bootlogo keeps on Lollipop, same happened to me until I unlocked bootloader and flashed a 6.0 firmware using fastboot
siredux said:
That's why your bootlogo keeps on Lollipop, same happened to me until I unlocked bootloader and flashed a 6.0 firmware using fastboot
Click to expand...
Click to collapse
This is bootlogo of my moto g 2015 after update to marshmallow then only i unlock it and root it. If this logo is not marshmallow, if any doubt you can post marshmallow logo , please.
drmuruga said:
This is bootlogo of my moto g 2015 after update to marshmallow then only i unlock it and root it. If this logo is not marshmallow, if any doubt you can post marshmallow logo , please.
Click to expand...
Click to collapse
The image you've uploaded is Lollipop bootlogo, try to flash OP logo using fastboot and let me know
hi, i am on cm14.1 i want to remove bootloader unlocked message, soooo is this enough???? shall i do the same procedure???
worked perfect on my Moto G4 Play xt6102! Thanx
Gesendet von meinem Galaxy Tab 2 3G mit Tapatalk
Dear developers and forum members hope you are doing well. This is my first post on XDA. The topic i want to discuss is already discussed on different forums but i didn't get my answer.
I want to install stock firmware marshmallow 6.0 of moto xt1092 or xt1095 on moto xt1096 (Verizon). Please let me know is it possible? If yes then how to do it? What are the prerequisites? I live in Pakistan where networks are GSM, UMTS or LTE. CDMA is not required at all. Thank you all for helping in advance.
Scitechboy said:
Dear developers and forum members hope you are doing well. This is my first post on XDA. The topic i want to discuss is already discussed on different forums but i didn't get my answer.
I want to install stock firmware marshmallow 6.0 of moto xt1092 or xt1095 on moto xt1096 (Verizon). Please let me know is it possible? If yes then how to do it? What are the prerequisites? I live in Pakistan where networks are GSM, UMTS or LTE. CDMA is not required at all. Thank you all for helping in advance.
Click to expand...
Click to collapse
Hello and welcome to XDA!
Yes, it is possible, I have xt1096 with stock 6.0 of xt1095.
Here is what you need to do:
- Unlock the bootloader
- Install twrp
- Flash stock xt1095 marshamllow
- You have marshmallow and everything is okay.
Have fun
OrenGazala said:
Hello and welcome to XDA!
Yes, it is possible, I have xt1096 with stock 6.0 of xt1095.
Here is what you need to do:
- Unlock the bootloader
- Install twrp
- Flash stock xt1095 marshamllow
- You have marshmallow and everything is okay.
Have fun
Click to expand...
Click to collapse
Thank you for your prompt reply. Bootloader is already unlocked. Could i install the firmware without twrp recovery? And also please post the download link to stock firmware.
Scitechboy said:
Thank you for your prompt reply. Bootloader is already unlocked. Could i install the firmware without twrp recovery? And also please post the download link to stock firmware.
Click to expand...
Click to collapse
I think you'd be better off with a custom recovery, it's the most useful thing you can flash on your phone. After that you just have to install the zip provided by AGISCI the great in the thread "xt1095 flashable stock ROM"
Flipz77 said:
I think you'd be better off with a custom recovery, it's the most useful thing you can flash on your phone. After that you just have to install the zip provided by AGISCI the great in the thread "xt1095 flashable stock ROM"
Click to expand...
Click to collapse
Alright. How to install custom recovery?
I did it some months ago and I just flashed it via fastboot, but I've just looked up the TWRP thread and they suggest another method (which they explain on their website). Either way you'll have to use fastboot, but it's not hard to do. Check out the TWRP thread in Original Development
....