AA-ANYKERNEL
Why another Kernel?
A lot of user faced a high Battery-Drain since Android 4.4.x.
It is hard to find the cause of the Problem, because it does not happen to everyone.
The problem seems to be related to the merged commit "apply P3110 JB Update1 from opensource.samsung.com" on our kernel source wich didn´t made Problems before Android 4.4.x.
Who is working on this Kernel?
Since i am still somehow a "Newbie" and don´t understand everything i am not able to sperate the Source of Problem. Our wonderfull Kernel-Dev @ketut.kumajaya is answering my qustions if i run in some trubble.
Why a own Thread for this kernel?
You must know, most of our Roms are using the CM-11.0 Kernel for their Roms - means: a lot of Roms are affected, even if it does not happen to every user. Solveing the issue does not only help fixing CM, also a lot of other Roms wich should be in interest of every user.
Kernel-Source
https://github.com/slimroms/kernel_samsung_espresso10
About the Process:
I took our SlimKat Kernel as base:
1. Applyed the JB Update 1 commit from @ketut.kumajaya
I went back to 3.0.31 kernel and applyed JB Update 1 in 3 parts instead 1 for better changes tracking.
At least i did the upstream from 3.0.31 to 3.0.101 again and added back all other changes wich got applyed on our 3.0.101 kernel before.
@tuxafgmur made huge commit to solve the drain, it was to big to get it merged.
So i made a diff between his changes - 500.000 lines diff - lol.
I worked many days on it to get out the original commits from the diff and found most of them.
So we know JB Update 1 seems to be the source of problem, now lets go ahead:
2. revert some parts from JB Update 1
Only Partially reverted:
arch/arm/mach-omap2/cpuidle44xx.c: (partially) revert JB Update 1 and partially apply "Fix configs & missing log options" from DhollmenKernel by Tuxafgmur
drivers/net/wireless/bcmdhd/dhd_sec_feature.h: partially revert JB Update 1/3
3. Add back missing parts from Upstream 3.0.38 -> 3.0.39
4. some different changes, i´ll list the some times later
DOWNLOAD
XDA:DevDB Information
[P31xx] AA-ANYKERNEL, Kernel for the Samsung Galaxy Tab 2
Contributors
Android-Andi, ketut.kumajaya
Kernel Special Features:
Version Information
Status: Beta
Created 2014-06-29
Last Updated 2014-07-27
Reserved
DOWNLOADS
Vendor-Blobs-update1.zip
(please flash the vendor-blobs DIRECTLY after the kernel)
For SlimKat:
GT-P31XX-Slim-3.0.101-test2.zip
For CyanogenMod 11:
GT-P31XX-CM-3.0.101-test2.zip
(forgot to upload test2 kernel, will do in the evening)
For OmniROM:
GT-P31XX-Omni-3.0.101-test2.zip
Reserved
@Android-Andi well done.. Our great andi ??
I am on SOKP so does this kernel wipe out the init.d files like the next kernel..
Sent from my GT-P3100 using Tapatalk
A new Kernel For Tab 2 Thx Man.
@iSagar7 no, this does not delete the init.d folder.
This is a development Kernel! No specials inside atm.
I hope we can use it later to compare with CM´s kernel to fix the the Battery-Drain on most Android 4.4.x Roms.
I am uploading a reworked installer, added also an Option to install our batteryfriendly SlimKat Kernel for those who need it after testing the AA-ANYKERNEL
I don´t need feedback here for SlimKat kernel, only for the AA-ANYKERNEL.
The installer includes all needed blobs for both kernel - don´t worry, it will automatically choose the right blobs
Don´t forget to thanks also @ketut.kumajaya and @psndna88 !!!
I took a screenshot of BBS, I think I'm having the battery drain issue. I didn't play any game or something, I'm just chatting on Facebook/WhatsApp.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Tab 2 using XDA-Developers app
Okay, so I ran the AROMA installer and it gave me three options. Which one should I choose?
Edit: choose the option to flash AA-ANYKERNEL. I'm stuck at the splash screen, can't go to recovery, but download mode is still okay.
Edit 2: managed to get into recovery after few tries, flashed NEXT 2.2.2 and it's booting now. Can you provide a tutorial to install the kernel, please?
Installed smoothly without any hitch on Slimkat 5.10 build. The aroma installer is lovely. The device is functioning smoothly. Shall report battery usage after a day's use. Thanks a lot for this new effort, Android-Andi!
Sent from my GT-P3100 using XDA Premium HD app
fr4n said:
Okay, so I ran the AROMA installer and it gave me three options. Which one should I choose?
Edit: choose the option to flash AA-ANYKERNEL. I'm stuck at the splash screen, can't go to recovery, but download mode is still okay.
Edit 2: managed to get into recovery after few tries, flashed NEXT 2.2.2 and it's booting now. Can you provide a tutorial to install the kernel, please?
Click to expand...
Click to collapse
I reupload to fix permissions for log.
Find it in /data/.ANYROM/
Attach it here for me please.
Have you been on NEXT Kernel before flashing or f2fs?
If yes, this meight be the reason for bootloop.
Gesendet von meinem GT-I8190 mit Tapatalk
Nice. New kernel
Waiting for a user feedback :victory:
Good job! :highfive:
@android andi, even after flashing the reuploaded v1.1, the log file is blank.
Sent from my GT-P3100 using XDA Premium HD app
MH... Will check it later
Gesendet von meinem GT-I8190 mit Tapatalk
Android-Andi said:
I reupload to fix permissions for log.
Find it in /data/.ANYROM/
Attach it here for me please.
Have you been on NEXT Kernel before flashing or f2fs?
If yes, this meight be the reason for bootloop.
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
I tried to open the log, but everything I see is a blank file, wtf?
Also, yeah I was on NEXT Kernel... should I do a clean install?
No, dirty flash the Rom to replace the kernel, after that flash my kernel.
Will check the log again after work... But should work on the one i uploaded today - same filename as before!
Gesendet von meinem GT-I8190 mit Tapatalk
Android-Andi said:
No, dirty flash the Rom to replace the kernel, after that flash my kernel.
Will check the log again after work... But should work on the one i uploaded today - same filename as before!
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
Should I go for AA-ANYKERNEL or SlimKat's kernel? Both of them fix the battery drain or only ANYKERNEL?
fr4n said:
Should I go for AA-ANYKERNEL or SlimKat's kernel? Both of them fix the battery drain or only ANYKERNEL?
Click to expand...
Click to collapse
SlimKat fixes it,
AA-Anykernel needs to be tested in hope we can fix CM.... Everything mentioned in OP. I don't need feedback here for SlimKat kernel.
Gesendet von meinem GT-I8190 mit Tapatalk
Android-Andi said:
SlimKat fixes it,
AA-Anykernel needs to be tested in hope we can fix CM.... Everything mentioned in OP. I don't need feedback here for SlimKat kernel.
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
Heh, I'm going for SlimKat, then.
I hope we can fix this problem soon, because it's really annoying!
@Android-Andi what this kernet support dual boot ... ?
Sent from my GT-P3100 using Tapatalk
Related
DISCLAIMER
You need to have an unlocked bootloader to use this ROM & kernel. Also I or any contributor in the software DOES NOT take responsibility of damages caused to your phone due to this ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Copy ROM zip and gapps zip to sdcard
2. Flash any kernel which has recovery (if you do not have any recovery yet)
3. Reboot device and go to recovery by pressing Vol-UP when LED is pink
4. If coming from 4.2 or 4.1 ROM wipedata/factory reset your phone
5. Flash ROM zip
6. Flash Gapps zip
7. Reboot and enjoy.
Official Nightlies (automatically built every 3 days on AOKP buildbox) :
http://aokp.co/devices/mint
Unofficial Test Builds (will contain experimental changes for testing) :
http://aokp.co/unofficial-builds#mint
https://hotfile.com/list/2267415/9f0d40f
Gapps :
http://goo.im/gapps/gapps-jb-20130813-signed.zip
We spend countless of hours doing this for next to nothing. Posts, views, and donations encourage me, and everyone else who helps out.
Donate to AOKP
Donate to me
Every donation is cherished and loved.
If you'd like to help contribute by writing code, feel free to stop by IRC and talk to us!
Latest merges on Gerrit
http://gerrit.aokp.co/#/q/sony+status:merged,n,z
Check out the ROM source on github. Open source, in the spirit of community kangage.
CREDITS
I cannot thank more for the hard work of FreeXperia Team (Jerpelea ( @FXP ), @Bin4ry, @Kali-, @Entropy512, @codeworkx, @Tilal6991 and others) for working on Xperia devices.
Also huge thanks to Sony Mobile AB for having been very developer-friendly and helping us in all sorts of ways.
XDA:DevDB Information
[ROM][4.3.1] AOKP :: jb-mr2 :: nightlies | test builds :: mint {T}, a ROM for the Sony Xperia T
Contributors
championswimmer, @FXP, @Bin4ry, @Kali-, @Entropy512, @cdesai, @codeworkx
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Based On: AOKP
Version Information
Status: Beta
Created 2013-10-06
Last Updated 2013-10-12
Reserved
UNOFFICIAL BUILD:
2013-10-06 : DOwnload
Reserved
first build up
use http://bugs.aokp.co to submit bug reports thanks
Thank you for your hard work! Any bugs we should be aware of?
_Raziel666 said:
Thank you for your hard work! Any bugs we should be aware of?
Click to expand...
Click to collapse
could not check HDMI as I do not have a HDMI tv at my place
rest most things I checked have worked. haven't seen any major bug.
championswimmer said:
rest most things I checked have worked. haven't seen any major bug.
Click to expand...
Click to collapse
First my thanks for your hard work.
My fone has been on tilals cm10.2 and TWRP.
First time I flashed your rom I only wiped cache, but the fone didn't start up to home screen.
I could see the unicorn first, then the colored x. After 5 minutes I did a cold start.
Now I flashed twice, after first flash I full wiped than flashed again.
But now I again see the colored x for 10 minutes at this moment.
I will go back to tilals cm10.2.
Thanks
championswimmer said:
could not check HDMI as I do not have a HDMI tv at my place
rest most things I checked have worked. haven't seen any major bug.
Click to expand...
Click to collapse
Thanks for your answer! I was mostly interested in battery life, because the superfast drain that occured in CM 10.2 was the reason I went back to 4.2.2.
Flashed and it started off good, But not long in to using the rom i had a Blue screen, also couldnt download from the play store, it just hangs when you press install.
BigD18t said:
Flashed and it started off good, But not long in to using the rom i had a Blue screen, also couldnt download from the play store, it just hangs when you press install.
Click to expand...
Click to collapse
umm blue screen ?
like Windows Xp ?
anyway, please guys help me out with some logs. I have a V, not a T, though similar they have minor differences.
Logs will be helpful
Both logcats and kmsg logs
Thanks works verry good
Gesendet von meinem LT30p mit Tapatalk 2
Thanks alot for this rom! I just installed it and will test it
With miui launcher and dark theme
Gesendet von meinem LT30p mit Tapatalk 2
Nice work here, swimmer! Hope to see this rom really flourish!
Sent from my LT30p using xda app-developers app
championswimmer said:
umm blue screen ?
like Windows Xp ?
anyway, please guys help me out with some logs. I have a V, not a T, though similar they have minor differences.
Logs will be helpful
Both logcats and kmsg logs
Click to expand...
Click to collapse
Indeed, just like XP but not text on it.
I had to flash back to CM because i needed the phone, but will try again.
I gonna give it a try. I'm very happe with AOKP on my N7.
Hopefully AOKP will work alot better then cm.
Can't wait to flash and test this rom!
Sent from my Xperia T using xda app-developers app
Works perfect so far. No reboots, no blue screen, no lag at all! Can't tell about battery life so far, but awesome build! Thanks Championswimmer!
Can those of you testing the ROM post your battery life results in like a day or two? I'm curious to see how different this is from tilal's CM 10.2 builds in terms of battery life.
zandm7 said:
Can those of you testing the ROM post your battery life results in like a day or two? I'm curious to see how different this is from tilal's CM 10.2 builds in terms of battery life.
Click to expand...
Click to collapse
+1
I tried making a fresh install, but I was overwhelmed by the amount of settings, and since I wanted the phone to be ready as I was leaving home in a while, I restored my cwm backup.
I'll wait to hear about the battery life from other users and try again in a couple of days!
Sent from my Nexus 10 using Tapatalk 4
Runing now, my fault was to restore data from recovery.
All works well, battery drain seems less then cm10.2.
I miss profiles a bit.
Will test the rom a bit longer.
Gesendet von meinem LT30p mit Tapatalk 4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
========== What is Omni ROM ?? ==========
Omni Rom Introduction
Omni Rom Homepage
Omni Rom Wiki
Omni Github
Omni Gerrit Code Review
Omni Bugtracker
========== Disclaimers ==========
As you all know, every human being is responsible for their own action and reactions, So you are flashing this ROM on your own risk. I am not responsible for any thing unexpected happen to your device.
========== Pre-requisite ==========
- Unlocked Bootloader with Rooted Xperia Z
- Working TWRP/CWM recovery
- Knowledge about how to flash ROMs
- Patience
========== Downloads ==========
- Omni ROM R3
- Gapps
- For Root Access >SuperSu
========== Installation Instruction ==========
- First Time User of Omni Rom
1. First of all download all 3 zip and put it in your sd-card (Internal or external)
2. Backup of your current ROM
3. Wipe data/factory reset, wipe dalvik cache, wipe cache
4. Install zip from sd card, Flash Omni ROM, Gapps and Super SU.
(You have to flash all 3 zip)
5. Reboot your device and wait untill it boots, it might take some time to boot
6. Go through setup wizard, It will be little bit slow but don't get panic, wait until you finish setup wizard.
7. Now read trouble shoot guide if you experience screen flickering, otherwise you are good to go.
- Already On Omni ROM
1. First of all download all 3 zip and put it in your sd-card (Internal or external)
2. Backup of your current ROM
3. Wipe system, wipe dalvik cache, wipe cache
4. Install zip from sd card, Flash Omni ROM, Gapps and Super SU.
5. reboot your device and you good to go.
========== Troubleshooting ==========
1. To decrease screen flickers > Go to setting > About phone > click 6 times on build number to activate developer option
- Go to developers option > under hardware acceleration rendering > check on Disable HW overlays (You have to do this on every reboot)
- This will stop screen flickers.
========== Working/Not Working ==========
- This is early preview release, so don't expect that everything will work as stable release.
- However except NFC and Some screen flickers, this can be use as daily driver ROM
- Follow installation instruction and troubleshooting strictly and you will have less bugs in the ROM
- FM radio don't work
========== Credits ==========
- Omni ROM developers for source
- CM for cyanogenmod Source
- Google for Android Open Source Project
- Jeroenqui for Meow-Kernel
- Myself for Making this ROM
========== Donations ==========
- To donate Omni Rom developer go to their Website
- To donate me go HERE
Changelogs
========== Changelogs ==========
Omni ROM - R1 : Oct/22/2013
- Initial release
- First Omni Build without any cherrypicking
- Android 4.3 - JLS36G
- Meow-Kernel for RIL support
- Removed SE policy link for build error
Omni ROM - R2 : Oct/23/2013
- Cherrypick - Multi-Window
- Cherrypick - Screenshot option in power menu
- Cherrypick - Add support for ADB over network
- Cherrypick - Clearall button to multitasking
- Cherrypick - Volume Panel Styles and tweaks
- Cherrypick - Enhance audio features
- Cherrypick - added more animation speeds
- Default Omni Kernel (No need to flash Meow Kernel)
- Screen Flickering solved
Omni ROM - R3 : Oct/25/2013
Omni Specific Changes : (by Omni developers)
- Android Version : 4.3.1 JLS36I
- add support for ADB over network
- Volume Tweaks
- Common GSM apn added to vendor
Cherrypick and local repo changes : (by Me)
- SElinux work around
- Fully Working TWRP recovery
- Multiwindow cherrypick
- Clear all button to multitask cherrrypick
- Added Power menu to Settings (Not working though) cherrypick
========== Screenshots ==========
Congratulations and good luck!
Thx will, download and try it now,, il try send some screen shots over , just got to back up 1st
You should add your rom here http://forum.xda-developers.com/showthread.php?t=2485280
Gesendet von meinem C6603 mit Tapatalk
ckyy said:
You should add your rom here http://forum.xda-developers.com/showthread.php?t=2485280
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Thanks for pointing it out
Done already...
Hi all
Could you please tell me what is different from cyanogen.... Any new features.... Screenshots...
Sent from my C6602 using xda premium
I strongly recomend that you read that you read the OP and the omnirom hp.
Sent from my C6603 using XDA Premium 4 mobile app
No screen shots of how the UI looks like ?
rer3 said:
No screen shots of how the UI looks like ?
Click to expand...
Click to collapse
Stock Android.
Gesendet von meinem C6603 mit Tapatalk
Is multi window already implemented?
Gesendet von meinem C6603 mit Tapatalk
rohit25 said:
Hi all
Could you please tell me what is different from cyanogen.... Any new features.... Screenshots...
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
rer3 said:
No screen shots of how the UI looks like ?
Click to expand...
Click to collapse
read OP carefully....
Go to OmniROM website and find out your answers
Tommy-Geenexus said:
Is multi window already implemented?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Multi Window will be implemented in 2nd release
Thanks
+1
the concept of this rom is really good, thanks guys for starting this project,looking forward to more releases
Thanks for this. Is there exFat support for external sd card?
Sent from my C6603 using xda app-developers app
well I actually wanted to release my build Im iKillCypher I did commit afew changes supporting omni for xerpia z
also I suggest using the stock kernel for Omni as the Meow Kernel does not have screen flickering fix..
https://gerrit.omnirom.org/#/c/1606/
https://gerrit.omnirom.org/#/c/1596/
I will try my best to improve and fix bugs good job on the build too bad I had a slow pc if not I would have release it sooner
Added OmniTorch Support For Yuga :
https://gerrit.omnirom.org/#/c/1629/
Report any bugs and Nightly will be out soon xD hit like if you think or you can donate to me for appreciation
also I will be releasing my build soon it will be like stock omni no modification etc
cheers
Omni ROM R2 on air now...
Flash it and report back about improvements and bugs if you have some
Thanks
Cheeers
Raj
downloading it as we speak.... would report back mate...
Sony devices, like older Samsungs, have a unified recovery/kernel in a single image. We haven't yet merged support for building TWRP on userdebug builds (although it's mostly complete with some small kinks to work out), so recovery fails on any userdebug build for devices with unified kernel/recovery.
Click to expand...
Click to collapse
so guys who are running this rom the recovery is broken...
follow my thread I will build all merged commits the only reason certain stuff aint added it is because it can really break your device.. I dont get it why is this guy not telling anyone here o.o and happily cherry picking stuff..
http://forum.xda-developers.com/showthread.php?p=46740478
xZain69 said:
so guys who are running this rom the recovery is broken...
follow my thread I will build all merged commits the only reason certain stuff aint added it is because it can really break your device.. I dont get it why is this guy not telling anyone here o.o and happily cherry picking stuff..
http://forum.xda-developers.com/showthread.php?p=46740478
Click to expand...
Click to collapse
Seriously ?
You think if recovery is broken, it will broke your device ??
I am developing ROM from almost 1 and half year through different device and I know what user gets through my build and what thing can break device...
For your information even if recovery is broken, that wouldn't break your device, remember this.
And stop misleading people, I already stated that this build is unofficial, so I am not stopping you from releasing the build you have made either official or semi-official.
This thread is for the ROM development, not for advertisement of any other build, So, stop posting something that you don't know about or not related to this build.
Peace,
Raj
x10forevers said:
Seriously ?
You think if recovery is broken, it will broke your device ??
I am developing ROM from almost 1 and half year through different device and I know what user gets through my build and what thing can break device...
For your information even if recovery is broken, that wouldn't break your device, remember this.
And stop misleading people, I already stated that this build is unofficial, so I am not stopping you from releasing the build you have made either official or semi-official.
This thread is for the ROM development, not for advertisement of any other build, So, stop posting something that you don't know about or not related to this build.
Peace,
Raj
Click to expand...
Click to collapse
absolutely right.
Flash latest build on my XZ, running perfectly fine, Recovery is running perfectly fine.
My device isn't broken and Its perfectly running condition, not even single problem on latest build.
Screen flickering solved and everything looking perfect.
Thanks for your work
Sorry I had limit of 8 Thanks per day
I DO NOT OWN THIS DEVICE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ROM
Website : http://www.c-rom.org/
Github : https://github.com/X-ROM
Forum : http://www.c-rom.org/index.php
Google + : https://plus.google.com/communities/102026782062296701405
For a list of features, check this post.
Credits
@aways for creating such a wonderful rom. All credits to him.
Arne Coucheron aka arco68 - used cm device tree to build this.
Installation Procedure
Make sure you are either on any KitKat ROM (CM11, etc) or on 4.2.2 TW based ROM and NOT on 4.1.2 TW based ROM
Download the latest build
Download Gapps
Take a nandroid backup
Recommended - Full wipe and factory reset
Flash ROM using latest ClockworkMod recovery
Flash Gapps
Reboot.
Enjoy!
Downloads
Serranoltexx ( GT-I9195 ) / Serrano3gxx ( GT-I9190 ) : here
I will also be providing unofficial ota support.
Changelog
http://www.c-rom.org/portal.php
Screenshots
Issues
Accessing the app circle bar might be tricky. I am trying to increase the trigger width/height.
Update Frequency
When there is a official update released.
Before someone points out, I am uploading the serrano3g build. It should be up in an hour.
Update : uploaded..
Sent from my GT-I9205 using Tapatalk
Thanks again, looks cool so far, 1 minor issue it uses slim camera which won't allow you to select auto focus.
GT-I9195 ~ C-Rom ~ f4k Kernel
This Rom: wow, wow, wow, WOW!
Carbon meets Pac-rom and I guess what we get is C-Rom! This rom is amazing, packed with features. It even contains both the Carbon performance app as well as Kernel tweaker, which could be a bit dangerous but it's nice to see so many options and features! Did I already say wow?
For anyone who is a fan of Carbon Rom, I would HIGHLY recommend you check this out. Just gave it a quick peek, everything seems to be fine. Going to install it with Gapps and f4ktion kernel now and give it a proper test drive.
Just one question, what is that message icon thing at the top of the notification panel? It doesn't seem to do anything..
@Silesh.Nair: Thank you for all the hard work you put in our device. I currently use RR but i;m always glad to see new ports for our Samsung.
Phenom2122 said:
, what is that message icon thing at the top of the notification panel?.
Click to expand...
Click to collapse
screenshot would help
Halo, I presume.
Sent from my GT-I9205 using Tapatalk
Totally awesome rom, has got everything I need in a rom I used to be a big fan of pac rom but this blows it away.
Can't thank the man enough for all his time and effort.
Running great with f4k kernel.
GT-I9195 ~ C-Rom ~ f4k Kernel
Silesh.Nair said:
Before someone points out, I am uploading the serrano3g build. It should be up in an hour.
Update : uploaded..
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Amazing another rom for the s4mini. Keep up the good work!
Edit: Wow that is a lot of features.
Sent from my GT-I9195 using Tapatalk
I'm very happy with this rom, runs very smoothly, it has a great performace and a lot of features, now I'm serching new themes for the newest feature (new engine CM theme manager) in the market but only found simple themes....
A lot of thanks it's the perfect rom for me. Good work!!!
Enviado desde mi GT-P7510 mediante Tapatalk
kioshio said:
I'm very happy with this rom, runs very smoothly, it has a great performace and a lot of features, now I'm serching new themes for the newest feature (new engine CM theme manager) in the market but only found simple themes....
A lot of thanks it's the perfect rom for me. Good work!!!
Enviado desde mi GT-P7510 mediante Tapatalk
Click to expand...
Click to collapse
User @kamikaze702k found a new theme compatible with this new engine. It can give you more of an idea of the way it works. You can find it here:
http://forum.xda-developers.com/showpost.php?p=52559509&postcount=699
Phenom2122 said:
User @kamikaze702k found a new theme compatible with this new engine. It can give you more of an idea of the way it works. You can find it here:
http://forum.xda-developers.com/showpost.php?p=52559509&postcount=699
Click to expand...
Click to collapse
Thanks I test it!! ?
Enviado desde mi GT-I9195 mediante Tapatalk
U guys need to odex it and use art. It just flies then... Absolutely brilliant work by the developer (not me).
Sent from my GT-I9205 using Tapatalk
Hi again! Testing the rom I found two small failure; there isn't init.d folder in system-etc, kernel tweaker app don't works correctly when you apply his tweaks. I use universal init.d app and works good now.
And lock screen wallpapers in themes dont work for me too.
Enviado desde mi GT-P7510 mediante Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:22 PM ----------
Edit: mmm... It's doesnt work I think...
Enviado desde mi GT-I9195 mediante Tapatalk
Great Rom, thank you!!!
Sent from mobil XDA app
I think I will use this as my default rom now.
Sent from my GT-I9195 using Tapatalk
kioshio said:
Hi again! Testing the rom I found two small failure; there isn't init.d folder in system-etc, kernel tweaker app don't works correctly when you apply his tweaks.
Click to expand...
Click to collapse
Confirmed. I will fix it in the next build. In the meantime, you can just create the init.d folder under /system/etc folder.
I also read a post on their Google plus page saying not to use kernel tweaker in v6.4.
Sent from my GT-I9205 using Tapatalk
spanish33 said:
I think I will use this as my default rom now.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
Me too, is the best rom at the moment I think!
Enviado desde mi GT-I9195 mediante Tapatalk
Please add the Russian language
There will be an update tomorrow. Details available here.
I have 2 S4 mini devices, both currently running CARBON, I'm thinking about flashing this for one of my device, but just wanted to know, is everything working? I mean all the functionalities of the ROM? Thanks
Sent from my GT-I9195 CarbonKat 4.4.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**BE AWARE, BUILDS FOR THE SAMSUNG GALAXY S5 ARE EXPERIMENTAL AT BEST. USE AS A DAILY DRIVER IS NOT RECOMMENDED. BUT IF YOU'RE FEELING FRISKY, FLASH AWAY AND PLEASE REPORT ISSUES WITH A LOGCAT IF POSSIBLE.
For S5 specific buildup status visit Garwynns google+ :https://plus.google.com/+XdaGarwynn/posts
Vanir was founded on the premise of performance tuning Android. We are currently looking to bring Vanir to more devices. If you're interested please message Dave Kessler or DHO for more info. BUG TRACKING -- http://goo.gl/hZSN2n Use this respectfully please and be thorough in filling it out. The more info the better. DOWNLOAD your nightlies from one of the NIGHTLIES links below To answer the inevitable question, they are the SAME BUILD. Download the one with the latest time and you're good to go!
Features:
(Note some of these features are being built back in to KitKat)
-Halo 2.0
-Android 4.4.3
-PIE
-AppBar
-Freaking insane speed
-Custom toolchains, -O3, OptiPNG, bionic, krait, and dalvik performance commits, -fstrict-aliasing, custom CFLAGS, and MORE!
-A Vanir performance on/off toggle
-UI mode switcher
-Tablet statusbar split
-Compiled with GCC 4.8
-Custom navbar, navring, and hardware key features
-Improved notification handling (active display & halo are in review also)
-Usability improvements like power reboot menu and sound
-Animation control
-Improved Vanir keyboard
-CM's profiles & quicksettings
-etc (But seriously, this frickin' thing is PACKED with features).
SCREENSHOTS
============
Nightlies:
============
Official VanirAOSP Download Server 4.4.3
http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/klte/
Commotio Download Server 4.4.3
http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/
FLASH AT YOUR OWN RISK
THE DEV TEAM IS NOT RESPONSIBLE FOR DAMAGE YOU CAUSE TO YOUR PHONE
** Please be aware some builds may not work, and be patient with the Vanir team as they continue to sort stuff out **
DIRECTIONS
Boot to Recovery
BACKUP
Wipe System/Data/Davlik/Cache
Install Rom
Install Gapps
Wipe Davlik/Cache
Profit!
°°For those flashing custom kernels°°
Be aware- Vanir includes a script that enables their own kernel tweaks. This script does not play well with flashing custom kernels. The solution!
Flash ROM
Navigate to- /system/etc/init.d/
Delete the file- 00kernelcompat
Reboot to recovery
Flash kernel
Profit!
You can also open the ROM zip on your PC before flashing and remove the file from the same directory then flash the ROM and you're good to flash the kernel.
**If you dirty flash between nighties, DO NOT wipe system or data before flashing the ROM. It will wipe gapps and the ROM install script won't be able to restore them**
That said, a clean flash is always recommended
GAPPS:
http://forum.xda-developers.com/showthread.php?t=2397942
DHO: http://www.emccann.net/dho/5-Gapps/
PA: http://paranoidandroid.co/gapps/
(http://www.androidfilehost.com/?a=show&w=files&flid=7988)
(http://www.mediafire.com/folder/gxxxpkbcke4yi/PA_GApps_-_Official_Releases)
-
Credits:
The Vanir Team
ParanoidAndroid
CyanogenMod
Esa Laukkanen and Tom Marshall (Cyanogen Inc.)
Google
GitHub
Carbon
PeterAlfonso
Garwynn https://plus.google.com/+XdaGarwynn/posts
ANYONE who has contributed to the ROM.. Please let me know if i've forgotten you.
Donate to PRIMEDIRECTIVE:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=55Q5LNS8UAXNJ
Donate to NUCLEARMISTAKE:
https://www.paypal.com/us/cgi-bin/w...63663d3faee8d48a116ba977951b3435308b8c4dd4ef1
For further support join our g+
https://plus.google.com/communities/111378032131473754160
Gerrit Review for ongoing changes, basically a live changelog
http://vaniraosp.goo.im
Reserved
Mobile network solution?
Or so far only on Sprint?
ivankolev said:
Mobile network solution?
Or so far only on Sprint?
Click to expand...
Click to collapse
Sprint? klte is the GSM model.
@ks3rv3rg - Assuming camera is not fixed, right? Thanks.
Awesome... Same bugs as 4.4.2?
inkd86 said:
Awesome... Same bugs as 4.4.2?
Click to expand...
Click to collapse
No, this is 4.4.3
no it's 4.4.2 and has the same problems as carbon etc. no data connection
Gesendet von meinem SM-G900F mit Tapatalk
Does it work on G900f ?
schalkerjung1984 said:
no it's 4.4.2 and has the same problems as carbon etc. no data connection
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Check the google+. The transition to 4.4.3 happening. And the lack of data isn't solved by editing your apn settings??
boot yes, data connection no, no imei and so on..
Gesendet von meinem SM-G900F mit Tapatalk
schalkerjung1984 said:
boot yes, data connection no, no imei and so on..
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Shoots... Tis unified so should work on all varients. May still be some kinks. I'll check in.
have make a full wipe, wipe everything, flash rom, gapps, rom boots fine, but i can't enter my pin like in carbon rom, and aokp.. when i go to settings, theire isn't my imei, phone number , no service at all :\
and btw: on google+ stand 4.4.3 is theire, but look 4.4.2 oO
Gesendet von meinem SM-G900F mit Tapatalk
with changing this two libs from stockrom it works maybie libsec-ril.so and libril.so but i don't know
edit: with change the libs, i can enter my pin, and my imei is back, but i can't make a call..blackscreen,and phone reboots.. hmm...
Gesendet von meinem SM-G900F mit Tapatalk
Does this work on sm g900h?
schalkerjung1984 said:
have make a full wipe, wipe everything, flash rom, gapps, rom boots fine, but i can't enter my pin like in carbon rom, and aokp.. when i go to settings, theire isn't my imei, phone number , no service at all :\
and btw: on google+ stand 4.4.3 is theire, but look 4.4.2 oO
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Did you try disabling the pin code request. Some aosp dont play well with that.
Sent from my SM-G900F using XDA Premium HD app
Someone flash this rom in g900t? Everything OK? Thanks for the advance..
S5 G900-T for Tapatalk Pro!
dashrink said:
Did you try disabling the pin code request. Some aosp dont play well with that.
Sent from my SM-G900F using XDA Premium HD app
Click to expand...
Click to collapse
yes, i've but nothing :\
Gesendet von meinem SM-G900F mit Tapatalk
Can anybody explain me if unified version means that it will work on all variants including sm g900h?
ks3rv3rg said:
Shoots... Tis unified so should work on all varients. May still be some kinks. I'll check in.
Click to expand...
Click to collapse
aooga said:
Sprint? klte is the GSM model.
@ks3rv3rg - Assuming camera is not fixed, right? Thanks.
Click to expand...
Click to collapse
klte is the GSM model, but obviously the ROM still is ready only for CDMA, not yet for GSM. No mobile network support. Replacing the libril.so and libsec-ril.so is somehow decision for finding the network, but then the dialer crashes and the phone reboots. Unfortunately
Sent from my SM-G900F using XDA Premium 4 mobile app
ivankolev said:
klte is the GSM model, but obviously the ROM still is ready only for CDMA, not yet for GSM. No mobile network support. Replacing the libril.so and libsec-ril.so is somehow decision for finding the network, but then the dialer crashes and the phone reboots. Unfortunately
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah ok. I haven't been paying attention to aosp for this phone. Usually gsm works first then cdma.
Sent from my SM-G900T using Tapatalk
Hey folks!
Here I'm with the latest Paranoid Android for our LG Optimus One :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. REBOOT
5. INSTALL GAPPSlight
PA 4+ UPDATES DO NOT NEED A FACTORY RESET.
BUGS:
Bluetooth not working
CREDITS,
Great thanks to AOSPA-armv6 team, Olivier, Team Simplicit
AOSP/Google, CyanogenMod, AndroidARMv6 team, OmniARMv6 team, ME
LINKS,
Development:
Change Logs
XDA Forum
Github
Gerrit
Social:
Google+
Twitter
Facebook
Reserved for Thanks
Sent from my Xperia M using XDA Premium 4 mobile app
DOWNLOAD
4.4 (Updated) : https://docs.google.com/file/d/0B5K0Avammb3SR3huM2NTYV92bE0/edit?usp=docslist_api
4.4 FINAL : http://www.mediafire.com/download/auxjbyyvpyny6sa/pa_p500-4.4-20140626.zip
RC2 : http://www.mediafire.com/download/a3wtqf2i3xif1fb/pa_p500-4.4-RC2-20140620.zip
CHANGELOG:
4.4 FINAL
Updated to 4.4 FINAL build
Same as Paranoid Android
RC2
Initial release
Based on RC2 build
Sent from my Xperia M using XDA Premium 4 mobile app
Bugs? How work camera please tell me <3
My camera is disconnected. You test and tell me
Sent from my Optimus One using XDA Premium 4 mobile app
rhar**** said:
My camera is disconnected. You test and tell me
Sent from my Optimus One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Gallery2.apk not included in /syste/app Camera must be installed either from another ROM or third party. I installed Nokia Camera and works fine (see the latest image of screenshot), except gallery error after rebooted the system.
Brief review
1. Installed ROM as instructed in OP, rebooted the system and system works as it should be. Since user apps have not yet been installed, system running fast and smooth as usual.
2. Tweaked build.prop: dalvik2cache script (dalvik.vm.dexopt-data-only=0), in order to move [email protected]*.dex files from /data/dalvik-cache to /cache/dalvik-cache and enable soft keys in navigation bar (qemu.hw.mainkeys=0). Rebooted the system and it works just fine. However, dexes still occupy /data/dalvik-cache. Need to be removed manually and gained plenty of free space (ca. 180 MB) in internal memory (/data) afterward.
3. Link2SD works, no headache, since it's fresh installed . However, restoring apps using TB, even a single app took minutes or failed. Will explore further.
4. No need to flash GappsLight. Google services files are already included in /system/app-priv. Simply installed the latest gmscore.apk, login into G server and all G services (incl. Playstore) works as it should be.
5. Will try PA features and report it later. At least floating window works like a charm. Hover? looking how to enable it.
Thanks to our great dev @rhar**** for bringing PA 4.4.3 to our obsolete device :good:
EDIT:
And of course, many thanks also to Olivier. :good:
xu3sno said:
Gallery2.apk not included in /syste/app Camera must be installed either from another
...
and report it later. At least floating window works like a charm. Hover? looking how to enable it.
Thanks to our great dev @rhar**** for bringing PA 4.4.3 to our obsolete device :good:
Click to expand...
Click to collapse
Thanks a lot for your review.
The gallery and camera were excluded because of /system storage issue.
And to enable hover, open the notification and you'll find a different icon near the quick settings. Just tap that and there you go!
Sent from my Optimus One using XDA Premium 4 mobile app
xu3sno said:
Thanks to our great dev @rhar**** for bringing PA 4.4.3 to our obsolete device :good:
Click to expand...
Click to collapse
rhar**** said:
Thanks a lot for your review.
Click to expand...
Click to collapse
Thanks for using my sources but not mentioning me anywhere at all. As you certainly know, I have forked and patched some of the PA repos to make AOSPA run better on our ARMv6 devices and this took me some time.
Why I know that you used my work? You starred one of my repos some days ago and the build number in the Screenshot is hardcoded to "KTU84M" (should actually be "pa_p500..." and so on.
Think about it.
Gesendet von meinem Xperia S mit Tapatalk
Olivier said:
Thanks for using my sources but not mentioning me anywhere at all. As you certainly know, I have forked and patched some of the PA repos to make AOSPA run better on our ARMv6 devices and this took me some time.
Why I know that you used my work? You starred one of my repos some days ago and the build number in the Screenshot is hardcoded to "KTU84M" (should actually be "pa_p500..." and so on.
Think about it.
Gesendet von meinem Xperia S mit Tapatalk
Click to expand...
Click to collapse
Vielen Dank für Ihre großartige Arbeit
Olivier said:
Thanks for using my sources but not mentioning me anywhere at all. As you certainly know, I have forked and patched some of the PA repos to make AOSPA run better on our ARMv6 devices and this took me some time.
Why I know that you used my work? You starred one of my repos some days ago and the build number in the Screenshot is hardcoded to "KTU84M" (should actually be "pa_p500..." and so on.
Think about it.
Gesendet von meinem Xperia S mit Tapatalk
Click to expand...
Click to collapse
****!
I just don't know how I forgot to mention your team!
I'm really, really sorry for that :crying:
Yes, I did use your repos, but had to edit things too to make it work on my phone, like Wallpaper, etc. But the main credits goes to you and your team.
And yea, I was myself wondering if the build no. is correct or not.
Again I'm sorry for not mentioning you
I can't find download link
borchaniz said:
I can't find download link
Click to expand...
Click to collapse
Just click INSTALL ROM in OP and you will be directed to this
xu3sno said:
Just click INSTALL ROM in OP and you will be directed to this
Click to expand...
Click to collapse
thx for the link but it downloaded for me an exe file which opens and just stops
borchaniz said:
thx for the link but it downloaded for me an exe file which opens and just stops
Click to expand...
Click to collapse
Weird!. It works for me . When you click the download file (zip), yes the browser will open a new window of advertisement or something likes that. Simply kill it and main window is downloading the zip file.
I'm not able to install Gapps, I flash them but after a reboot they aren't in! Tried with GAPPSlight and Banks, also tried to flash them with a different recovery (TWRP 2.7.1.0).
P.S. the ROM runs really fast and seems stable, more than other KitKat builds, thanks a lot
ale29-09 on Nexus⁴ and Tapatalk Pro™
borchaniz said:
thx for the link but it downloaded for me an exe file which opens and just stops
Click to expand...
Click to collapse
Try this
http://download1289.mediafire.com/n632wx29jdsg/a3wtqf2i3xif1fb/pa_p500-4.4-RC2-20140620.zip
ale29-09 said:
I'm not able to install Gapps, I flash them but after a reboot they aren't in! Tried with GAPPSlight and Banks, also tried to flash them with a different recovery (TWRP 2.7.1.0).
P.S. the ROM runs really fast and seems stable, more than other KitKat builds, thanks a lot
ale29-09 on Nexus⁴ and Tapatalk Pro™
Click to expand...
Click to collapse
You need to trim the ROM first
Or as @xu3sno said, "No need to flash GappsLight. Google services files are already included in /system/app-priv. Simply installed the latest gmscore.apk, login into G server and all G services (incl. Playstore) works as it should be."
Additional review
Issues:
1. Google + 4.3.1 from @Notonlyeyes can't not be installed , while it works fine on OMNI (Beta7) :good:
2. Spirit FM (Nov 16) doesn't work. Duh. It works like a charm in Beta7. No need BT
With those issues, prefer Beta7 for my daily driver. Features enrichment on Beta7 can be done using Xposed modules :good:
Reverted to Beta 7 :good:
xu3sno said:
Additional review
Issues:
1. Google + 4.3.1 from @Notonlyeyes can't not be installed , while it works fine on OMNI (Beta7) :good:
2. Spirit FM (Nov 16) doesn't work. Duh. It works like a charm in Beta7. No need BT
With those issues, prefer Beta7 for my daily driver. Features enrichment on Beta7 can be done using Xposed modules :good:
Reverted to Beta 7 :good:
Click to expand...
Click to collapse
I don't know about Google+ but spirit has issues because of drivers.
For that, Omni's kernel is great. The only issue it has is offline charging. So, I'm thinking of making a kernel compatible with both cm and aosp (the source)
Sent from my Optimus One using XDA Premium 4 mobile app