ShockGensMOD KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES:
COMPILATION FEATURES:
GCC 4.8
-O3 Fags in all Make Files
Pipe Optimizations
General Makefile with many flags
SOUND FEATURES:
Sound Control 3.6
Maximun Potency on SlimBus
CPU FEATURES:
Interactive Governor
Intelliacyive Governor
Intellidemand Governor
LionHeart Governor
Weatley Governor
Many Patches for better CPU Control
GPU:
Simple GPU Algorithm: Initial coding for devfreq based Adreno Drivers (faux123)
Adreno Tweaks gmem_size 512K
Many KGSL patches
BATTERY FEATURES:
New flag WQ_POWER_EFFICIENT for power oriented workqueues (more information Here)
Tweaks for PowerSuspend from faux123 and franciscofranco
Reduce Latencis (In various network workloads, __do_softirq() latencies can be up
to 20 ms if HZ=1000, and 200 ms if HZ=100.)
Enable Power efficient
CPU freq limiter driver
Powersuspend(Hybrid_hook (default),Userspace_trigger,Autosleep_hook)
LCD AND DYSPLAY ANIMATION FEATURES:
Dynamic FPS using VFP
LCD_KCAL: Color control driver
Improve UI Responsives
FSync Control
OVERCLOCK:
Small overclock in bus and RAM 400 MHz on bus
I/O:
ROW: Hardcode Enable Quantum
Tweaked Deadline Scheduler
FRANDOM Support
Entropy Tweaks (More info Heren)
Asynchronous I/O
TWEAKS:
ZenTune v3
OTHER FEATURES:
Stereo Call Recording Support
Network Speed Hack
Tune OMM for Screen off/on
SpeedUp sockets numbers
Marge many commits form Kernel.org and Linus Torvalds
Optimize Sfck Compression
Dynamic management of dirty page writebacks, expire and cache pressure
Kernel SamePage Merging (KSM)
NEON Mode
Many KGSL patches
Migrate lasted CM12 commits
Migrate lasted Motorola kernel sources and prima
GITHUB: https://github.com/xperiafan13-rom
DOWNLOADS:
ShockGensMOD v01
ShockGensMOD v02
ShockGensMOD v03
ShockGensMOD v04
SgockGensMOD v04b BETA
ShockGensMOD v05
ShockGensMOD v06
CREDITS:
Percy-g2
Savoca
Shivam Kuchhal
Sources: GitHub
XDA:DevDB Information
ShockGensMOD, Kernel for the Moto E
Contributors
xperiafan13
Kernel Special Features: Maximum Performance
Version Information
Status: Beta
Created 2014-11-01
Last Updated 2014-10-31
First post!!!! Gr8 work.
Once this kernel has d2wake,sweep2wake....I'm planning to implement this kernel in crdroid....once again gr8 work...a kernel is need of the hour for moto e
Testing
ashwin007 said:
First post!!!! Gr8 work.
Once this kernel has d2wake,sweep2wake....I'm planning to implement this kernel in crdroid....once again gr8 work...a kernel is need of the hour for moto e
Click to expand...
Click to collapse
Im working on this features.. please be patient, in next relase im add this...
xperiafan13 said:
Im working on this features.. please be patient, in next relase im add this...
Click to expand...
Click to collapse
Not at all a problem ....take ur own time...!!!!!!!
Awesome work dude congratulations
And does this work in new cm11 builds,PaC etc Roms? Or having issues as in furnance?
Thanks in advance
This kernel is just perfect!! One of the best "ram optimized" kernel so far!! Could see a good companion for performance!
But found that the screen wake controls are not working :what: am i going wrong?? Or does it requires a fix??
Can see the screen wake controls in trickster mod but after activating too it dosent seem to work! :/
-The kernel is working like a charm with carbonrom and so expect it to he the best for other roms to unlike furnace kernel had some issue!
-no wifi bug at all!
Awesome work OP!
Pls correct me wid the screen controls!
Thanks in advance and a great job done :thumbup:
Sent from my XT1022 using XDA Free mobile app
xperiafan13 said:
ShockGensMOD KERNEL
SoundControl 3.6
FSync control
Stereo Call Recording Support
Use Android device as USB keyboard/mouse
Click to expand...
Click to collapse
How can i use this???
Link me to that aaps.
Working good on PA beta 4.
Edit
Touch not working
S2w not working.
Sent from my XT1022 using xda premium
issue regarding Auto Rotation...
i have issue regarding auto rotate screen as it is not working after flashing this kernel...please anyone confirm...
abhishek.chavan said:
i have issue regarding auto rotate screen as it is not working after flashing this kernel...please anyone confirm...
Click to expand...
Click to collapse
Affirmative.... Its not working!
Bug found!
Sent from my XT1022 using XDA Free mobile app
---------- Post added at 02:40 PM ---------- Previous post was at 02:36 PM ----------
nisu4717 said:
How can i use this???
Link me to that aaps.
Working good on PA beta 4.
Use the trickster mod app from play store
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
Sent from my XT1022 using XDA Free mobile app
Test results on fresh install on crdroid ROM
Phone model (XT1022)
Working
Wifi
Bluetooth
Hotspot
Tethering
Mobile network
Data connection
Not working
Auto rotate
Sweep to wake
Double tap to wake
Logs link
http://d-h.st/FsHM
I've reverted back to previous ROM so can't provide any other logs
I've attached logcat,dmesg,kmsg.
Thank you for the kernel
cm nightly : wifi not working and sweeptosleep + sweeptowake + doubletaptowake not working
Sent from my Moro E XT1025
Sorry my bad english im from Brazil
New update
V03 already done
sensors now working
ultra optimized... Ultra performance.. Better ram management
for better performance use interactive governor and deadline schuduler
hapy hallowen
xperiafan13 said:
V03 already done
sensors now working
ultra optimized... Ultra performance.. Better ram management
for better performance use interactive governor and deadline schuduler
hapy hallowen
Click to expand...
Click to collapse
Great work mate!!! A request!
How about bringing back the shockgenmod rom alive with this kernel!!! Would make a perfect combination and would be an awesome rom too!
Either thanks for the kernel again!!:thumbup:
Sent from my XT1022 using XDA Free mobile app
xperiafan13 said:
V03 already done
sensors now working
ultra optimized... Ultra performance.. Better ram management
for better performance use interactive governor and deadline schuduler
hapy hallowen
Click to expand...
Click to collapse
Wifi and auto rotate working fine.
Frequency lock also working fine.
Have you removed dtw and stw options??
Can't view it in trickster mod....
On crDroid b3 rom
dhruvmu said:
Wifi and auto rotate working fine.
Frequency lock also working fine.
Have you removed dtw and stw options??
Can't view it in trickster mod....
On crDroid b3 rom
Click to expand...
Click to collapse
Ya its mentioned in the features list by OP those features are removed for the moment!
Sent from my XT1022 using XDA Free mobile app
Eagerly waiting for dt2w and s2w
everything is working fine in new v3
Thanx OP as bugs from previous version are squashed.. Waiting for new version with s2w n d2w support..: thumbup
Working perfectly as said
I am facing heating issues with this kernels any one else
Related
Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
multi rom by Olivier (sony 233 blobs)
81mhz lowest cpu frequency
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
compatible roms
carbon rom
beanstalk rom
AICP kk rom
aokp rom
cm11 rom
more testing needed
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
thomas1991_12 for linux patches and features
cyanogenmod for kernel source
Tommy-Geenexus for guidance
faux123 - For almost all kernel features
BrateloSlava-for many features and guidance
naitik2012-for testing
twrp ramdisk-Angel bob
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia Z
Contributors
nikhil18
Kernel Special Features:
Version Information
Status: Testing
Created 2014-07-10
Last Updated 2014-09-22
changelog
sony 233 blobs.
version 0-initial release
version 1-added intelliplug,gpu overclocking,linux patch to 103,gpu simple governor,gpu voltage control,cd rom emulation .
version 2 - added lot of governors,f2fs support,exfat support and hopefully wifi fixed
version 3-added gpu overclock 627mhz,added tweaked CPU auto_hotplug driver,patches for improved CPU hotplug efficiency and at last finally wifi 100% fixed and this is the biggest update of this century
version 4-added kexec hard boot(multi rom) thanks to Olivier ,added multirom twrp recovery,fixed gpu simple governor,changed to xz compression.
version 5-fixed multirom,added row schedule and i have released two versions with autosmp and intelliplug.
version 6-added row sched,500ma charging for unknown chargers,fast charge,disabled some debugging for better performance,fixed sound stuttering if its there.
version 7 - added 81 and 270 mhz cpu frequencies,vfp hardfloat for better performance,set westwood tcp as default added many tcp congestion controls eg reno,highspeed,htcp,illinois,scalable and many more.
version 8-.283 blobs added,added interactive gpu governor,anykernel,fixed cd rom emulation,sound control 3.6 and for more you can check the commits.
downloads
Ok guys uploaded version 8 autosmp version here http://d-h.st/FwM enjoy
faq
Q1 low frequencies like 81mhz not sticking
Ans turn on frequency lock in trickstermod
Q2 if you are having random reboots?
Ans lower the max freq to 1512000 and increase the min frequency to 384mhz
nikhil18 said:
can any one please upload latest cyanogenmod boot.img so that i can extract the ramdisk and upload the kernel
Click to expand...
Click to collapse
http://www.infectedbuilds.net/downloads/yuga/cm_11/latest_boot_img/
Maybe this could help.
Very interesting. I'll test it as soon as you upload.
Can you add "true CD-ROM emulation interface" feature? DriveDroid is very useful for me.
version 1 uploaded
i dont have an xperia z so i am not sure it will boot or not
m0b said:
Very interesting. I'll test it as soon as you upload.
Can you add "true CD-ROM emulation interface" feature? DriveDroid is very useful for me.
Click to expand...
Click to collapse
i will try to add this if the kernel boots
nikhil18 said:
version 1 uploaded
i dont have an xperia z so i am not sure it will boot or not
Click to expand...
Click to collapse
It boots but GSM doesn't work (returns error while searching network). Everything else seems fine.
Tested on Beanstalk 4.4.4.001 which is based on CM11. I'll test on CM11 later if it's necessary.
m0b said:
It boots but GSM doesn't work (returns error while searching network). Everything else seems fine.
Tested on Beanstalk 4.4.4.001 which is based on CM11. I'll test on CM11 later if it's necessary.
Click to expand...
Click to collapse
thats a very old build try the latest cm
guys any one else having this problem
Graphic bugs (screen tearing when scrolling) and wifi not turning on on Thomas' CM11.
Testing on Infected's CM11 now.
guys try carbon rom by Alx31TLse
@nikhil18
You shouldn't use -Ofast Optimisations.
They do more harm rather than bringing any benefits.
Gesendet von meinem C6603 mit Tapatalk 2
---------- Post added at 04:32 PM ---------- Previous post was at 04:30 PM ----------
olex195 said:
Graphic bugs (screen tearing when scrolling) and wifi not turning on on Thomas' CM11.
Testing on Infected's CM11 now.
Click to expand...
Click to collapse
You shouldn't use this kernel on thomas rom, the new drivers aren't added.
Gesendet von meinem C6603 mit Tapatalk 2
nikhil18 said:
thats a very old build try the latest cm
guys any one else having this problem
Click to expand...
Click to collapse
First of all Thank you so much... i cant believe on my eyes when i saw first thread in OG development forum with name "lightning kernel cm11 " ..
your kernel have all the features i wanted , specially Sound control , CPU OC & Undervolting..
m really happy to see that we have working CM11 custom kernel with so many features.
btw Thomas's latest CM11 kernel source > https://github.com/daeiron/android_kernel_sony_apq8064 may be it will help u
Keep developing and Thanks again
delete
Working flawlessly on Carbon ROM :good:
Performance has increased at least 2x.
Just one issue, GPU overclock does not stick, it resets to 400 after a while. (I use trickster mod)
PS: Doesn't work with PAC ROM.
Also works with Beanstalk( Fastboot flashed the boot.img)
venky716 said:
Working flawlessly on Carbon ROM :good:
Performance has increased at least 2x.
Just one issue, GPU overclock does not stick, it resets to 400 after a while. (I use trickster mod)
PS: Doesn't work with PAC ROM.
Click to expand...
Click to collapse
are you using carbon rom by Alx31TLse?
how about battery life?
@nikhil18, i cant express my grattitude for your kernel, i confirmed alls working on latest AICP 4.4.4 KK, has everything i wanted, super fast, response is just simply amazing, i do also however face clocks reverting over time even when i manually clock via system files, but probably os doing it, thank you so much finally a KK kernel that supports everything.. If i can do anything to contribute or help please let me know, will bug report in a couple of days.
Sent from my Xperia Z using XDA Premium 4 mobile app
corpsegrinder62 said:
@nikhil18, i cant express my grattitude for your kernel, i confirmed alls working on latest AICP 4.4.4 KK, has everything i wanted, super fast, response is just simply amazing, i do also however face clocks reverting over time even when i manually clock via system files, but probably os doing it, thank you so much finally a KK kernel that supports everything.. If i can do anything to contribute or help please let me know, will bug report in a couple of days.
Sent from my Xperia Z using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu and turn off stock mpdecision
nikhil18 said:
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu
Click to expand...
Click to collapse
Thanks i will do, the 192mhz on standby is surprisingly very stable, everything is great so far only things not working that i see are d2w and s2w.. You can enable them , i did with trickster mod, but doesnt work.. Only bugs ive spotted..Thanks again xD
Sent from my Xperia Z using XDA Premium 4 mobile app
nikhil18 said:
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu and turn off stock mpdecision
Click to expand...
Click to collapse
Hi
m facing graphic and wifi issue in latest CM11.. can u pls solve those issue
Thanks
naitik2012 said:
Hi
m facing graphic and wifi issue in latest CM11.. can u pls solve those issue
Thanks
Click to expand...
Click to collapse
If you installed custom kernel with custom WiFi libs then just reflash ROM and then install this kernel and WiFi will work.
KPX-Kernel
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* the third world war, or you getting fired because your phone exploded. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, so you take the risk.
* I will only laugh at you when your pointing at me, xda or anyone else.
*/
Click to expand...
Click to collapse
I proudly present my kernel for Moto g 4G
At the moment only a few features are added to the kernel but it will increase with the time
Confirmed working on Carbonrom, Cyanogenmod and AOKP (other cm-based roms should work to)
Click to expand...
Click to collapse
WARNING: This Kernel will NOT work with Stockrom
Features:
Intelli_plug added
Lz4 compression added
Over-/underclocking
I/O Schedulers added (BFQ/SIO/FIOPS/ZEN/VR)
Linaro 4.9.2
Neon mode
sweep2wake and doubletap2wake
Govenors added(Smartmax, Intellidemand, DanceDance, Weathly, Lionheart)
Quick wakeup
More to come
Download:
Stable:
-
Beta:
KitKat-PeregrineX-0.0.4-11-16-2014_02-29_experimental.zip - 21.83 MB
Old releases
KitKat-PeregrineX-0.0.3-11-15-2014_17-59_experimental.zip - 21.83 MB
KitKat-PeregrineX-0.0.2_experimental.zip - 21.81 MB
Source:
https://github.com/Para94/kitkat-peregrine-x
Thanks to (Not in order):
Motorola Mobillity LLC for kernel source
Dhacker29 as the first developer in the moto G
YoshiShaPow for his Tutorial
TeamMex/klozz for his work on the Moto g-kernel
faux123 for his work on the Moto g-kernel
somcom3x for his work on peregrine
savoca for his work on the Moto g-kernel
XDA:DevDB Information
KitKat-PeregrineX, Kernel for the Moto G
Contributors
Para94
Source Code: https://github.com/Para94/kitkat-peregrine-x
Kernel Special Features:
Version Information
Status: Testing
Current Beta Version: 0.0.4
Beta Release Date: 2014-11-16
Created 2014-11-15
Last Updated 2014-11-16
reserved for installinstructions
Changelog
Version 0.0.4
Overclocking added
Quick wakeup enable
Version 0.0.3
sweep2wake and doubletap2wake
Govenors (Intellidemand, Smartmax, Ondemandplus, Wheatley, DanceDance, Lionheart)
Inital release (Version 0.0.2)
Intelli_plug added
Lz4 compression added
Over-/underclocking (Not working at this Stage)
I/O Schedulers added (BFQ/SIO/FIOPS/ZEN/VR)
Linaro 4.9.2
Neon mode
reserved for explanation
I've been waiting for a good custom kernel for my Moto G LTE! (My other phone is a Nexus 5, so I've gotten a bit spoiled by that...) I'm downloading as we speak! Thanks for this!
Works great with AOKP
Thanks a lot, especially for intelli_plug, don't see that often these days...
I'm looking forward to see what you will do in the feature.
Could you maybe try to implement double tap to wake?
What control app do you use?
Regards
Per Regenbogen von meinem Moto G geKANGt.
Any possibility to implement sweep2sleep/sweep2wake/dt2w?
Thank you for your work!
Sent from my XT1039 using XDA Free mobile app
keenofhiphop said:
Works great with AOKP
Thanks a lot, especially for intelli_plug, don't see that often these days...
I'm looking forward to see what you will do in the feature.
Could you maybe try to implement double tap to wake?
What control app do you use?
Regards
Per Regenbogen von meinem Moto G geKANGt.
Click to expand...
Click to collapse
At the moment I'm using Trickstermod
CptGia said:
Any possibility to implement sweep2sleep/sweep2wake/dt2w?
Thank you for your work!
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
Working atm on it
Aww, yea! Thanks a ton and greets to Osna
thanks for the kernel. flashed it yesterday on cm11 nightly. seems to be working good!:good:
you're welcome, for use my commits, my commits are under GPLv3 and you not giving me credits
cheers,
TeamMex said:
you're welcome, for use my commits, my commits are under GPLv3 and you not giving me credits
cheers,
Click to expand...
Click to collapse
Added you to the the credits.. sorry, thought I did so
Hopefully no everyting is alright
you you implement Knock knock feature (doubletap on screen to wake device) ? - would be awesome
Version 0.0.3 uploaded.
+ sweep2wake and doubletap2wake added and enabled by default (in my opinion they need a little bit of adjustment, so please reply what you think)
+ some Govenors added
With 0.0.3 max frequency seems to be stuck at 600mhz, tried with fauxclock and trickstermod. Did not have this issue with 0.0.1. Thanks for your work
I forgot I'm running aokp.
Sent from my unknown using XDA Free mobile app
I think the lowest frequency (192 mhz) is not usable for my device because it normally creates a stutter when waking up the device. That's how it was on decepticon kernel.
Now the device does not wake up from deep sleep only when I set min frequency to 192. That's on 0.0.2
I'll flash 0.0.3.
Thanks!
Per Regenbogen von meinem Moto G geKANGt.
nice to see fast updates 0.0.3 doesn't boot on kitkat stock rom. will this kernel be available also for stock rom (5.0) in future?
nbock97 said:
nice to see fast updates 0.0.3 doesn't boot on kitkat stock rom. will this kernel be available also for stock rom (5.0) in future?
Click to expand...
Click to collapse
Stockrom currently not supported. I will port this kernel to Lollipop and Stockrom in a while.
New release
Version 0.0.4
finally a working overclocking
Quick wakeup
And as you know more features to come up in a while
Double two to wake is still very imprecise, but the device now wakes up reliably from deep sleep with min frequency set to 192 MHz. AOKP
Per Regenbogen von meinem Moto G geKANGt.
0.0.4 v link seems to be broken
With 0.0.4 the processor seems to be locked at highest frequency
I was trying out Lionheart governor. Maybe he doesn't go well with the unicorn (AOKP).?
Regards
Edit: governor was set back to performance...
Per Regenbogen von meinem Moto G geKANGt.
Zombie is a Kernel which extends the Xperia Z's capabilities.
It is aimed at including only useful and strictly tested features, enhancements and optimisations,
This Kernel will not receive further updates, go here for some Lollipop goodness!
Features:
* Compiled with Linaro GCC 4.9.3 and -0s
* XZ Compression
* Cleaned kernel source and debugging
* new Gamma Control, way more reliable than the old one
* Morfic's Voltage Control
* Governors updated from CAF + CAF CPU-Boost driver for more smoothness
* Zen and BFQ I/O Schedulers added, Zen is default
* MultiRom support
* Latest autosmp driver
* 3-Phase fully-configurable Kernel Thermal (userspace thermald is disabled)
* DT2W/S2W with haptical Feedback
* FastCharge
* Ezekeel's Fsync Control
* Tunable Vibrator Strength
* Conservative GPU Governor from CM
* Backports from Linux Mainline
* Security patches
* Some more misc stuff
Downloads:
Latest Build: Zombie-b8
XDA:DevDB Information
Zombie, ROM for the Sony Xperia Z
Contributors
Tommy-Geenexus
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-12-20
Last Updated 2015-08-13
Thanks:
I would like to thank all devs involved (credits in the repo) , @Christopher83 for his toolchain builds and @Olivier for the ramdisk.
Also i'd like to thank Sony for beeing such helpful towards devs and users on xda.
looks great thanks bro
usman_fareed said:
looks great thanks bro
Click to expand...
Click to collapse
Thanks, feel free to report how its running
Sent from my Z Ultra using XDA Free mobile app
Thanks @Tommy-Geenexus
Stock .292 ROM , its running very smooth...
Thnkx @Tommy-Geenexus
It worked fine nd im loving it
bt multrom manger shows it doesnt have kexec hardboot patch
vikash1994b said:
Thnkx @Tommy-Geenexus
It worked fine nd im loving it
bt multrom manger shows it doesnt have kexec hardboot patch
Click to expand...
Click to collapse
Ignore it.
I have added Kexec and am using it myself, it works fine
My fault, i forgot to update the new config.
Sorry, a build with Kexec fully working will be up soon.
Sent from my Z Ultra using XDA Free mobile app
Tommy-Geenexus said:
Ignore it.
I have added Kexec and am using it myself, it works fine
My fault, i forgot to update the new config.
Sorry, a build with Kexec fully working will be up soon.
Sent from my Z Ultra using XDA Free mobile app
Click to expand...
Click to collapse
Thnkx a lot,,eagerly waiting for the new build
vikash1994b said:
Thnkx a lot,,eagerly waiting for the new build
Click to expand...
Click to collapse
Update!
build 2:
* enabled Kexec
* oc to 1,728 Ghz
* backported workqueue from Linux 3.7
Enjoy.
Tommy-Geenexus said:
Update!
build 2:
* enabled Kexec
* oc to 1,728 Ghz
* backported workqueue from Linux 3.7
Enjoy.
Click to expand...
Click to collapse
Nice to c this mate. Gonna download it now and report after some days using it.
gripfly said:
Nice to c this mate. Gonna download it now and report after some days using it.
Click to expand...
Click to collapse
Yeah feel free to report, with any issues you may or may not have
Sent from my Z Ultra using XDA Free mobile app
Great kernel for stock based ROM. Thanks OP. Could you please add double tap to wake and sweep to wake functionality?
Thanks bro, good to see u back! Kernel run's smoothly.
BTW already played around a bit with gamma control; nice to see the colour changing without having to turn screen off!
I came to 235 255 255 rgb for now but I'm kinda curious what settings do u recommend? As u tested this thoroughly
bloodyprince said:
Great kernel for stock based ROM. Thanks OP. Could you please add double tap to wake and sweep to wake functionality?
Click to expand...
Click to collapse
Maybe, but i have to first clean the code for sweep2wake, it's quite messy.
langeveld024 said:
Thanks bro, good to see u back! Kernel run's smoothly.
BTW already played around a bit with gamma control; nice to see the colour changing without having to turn screen off!
I came to 235 255 255 rgb for now but I'm kinda curious what settings do u recommend? As u tested this thoroughly
Click to expand...
Click to collapse
Yeah this baby is nice tested, however you can set whatever you find best looking
I currently haven't got it enabled as i like natural colours.
Sent from my Z Ultra using XDA Free mobile app
Erm... how about minimum frequency of 192mhz or 270mhz? Would be more battery friendly I guess.
Kelvin98 said:
Erm... how about minimum frequency of 192mhz or 270mhz? Would be more battery friendly I guess.
Click to expand...
Click to collapse
I'll add and test if it improves anything, but it could cause instability and drain.
Let's see
Sent from my Z Ultra using XDA Free mobile app
Has this kernel double tap to wake ?
bloodyprince said:
Great kernel for stock based ROM. Thanks OP. Could you please add double tap to wake and sweep to wake functionality?
Click to expand...
Click to collapse
Tommy-Geenexus said:
Maybe, but i have to first clean the code for sweep2wake, it's quite messy.
Click to expand...
Click to collapse
datvu said:
Has this kernel double tap to wake ?
Click to expand...
Click to collapse
If its not stated in the OP its not included, as simple as that.
Sent from my Z Ultra using XDA Free mobile app
Tommy-Geenexus said:
I'll add and test if it improves anything, but it could cause instability and drain.
Let's see
Sent from my Z Ultra using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I would like the lower freq's too!
And maybe some more CPU/GPU gov's, if I may do a wish
datvu said:
Has this kernel double tap to wake ?
Click to expand...
Click to collapse
Please check above posts
langeveld024 said:
Yeah I would like the lower freq's too!
And maybe some more CPU/GPU gov's, if I may do a wish
Click to expand...
Click to collapse
Interactive/Ondemand are working very well.
I may add few others, but none of these very old ones which are causing countless issues.
Sent from my Z Ultra using XDA Free mobile app
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
Thunderoar Kernel For SM-T116
(Tab 3 Lite 7.0 3G)
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...
CPU Hotplug:
AutoSMP
Added CPU governors:
Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance
and so on...
Planned Update
-nothing i guess
Bugs(s)
-No MORE BUG!
Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:
Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!
Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it :good:
Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60
20/11/2017
Im back guyss, im out for awhile because my current kernel are sucks,
So i got a new phone which is Samsung J5, im developing kernel for the J5 for my
my own use, Not for sharing others because it will hurt my reputation XD,
and from that i learned a lot more about developing a good kernel,
Im goin to update the kernel using newer source, and im able to fix the
MTP and random reboot issues which is make me happy, its going out soon,
So if you guys still usin this device, you can use the new kernel that i will
post soon.
5/7/2017
For those of you who had a booting problem,
the V4.1.1 probably will fix it
3/7/2017
Finally, an actual stable one,
Rebuilt from the newest source from scratch
-V4.1-revived-version
22/6/2017
The new one probably the most stable,
been testing it for a week and so
far no problem or frequent reboot happen or
something like that
7/5/2017
Finally!!! Camera are fixed guys!
MTP functionality is still unconfirmed
Sorry for the long wait ^-^
1/1/2017
I decided to release a maintenance release update cause i found
that the device crash many times throughout all my kernel
and i decided to think about it more seriously and i had made
a maintenance release for you and report me if there still
crash happening on the device
27/12/2016
I wanted to release the kernel a little bit early cause
busy with new year celebration.The latest one is Thunderoar Kernel v2.6
Happy New Year to all of you!! sorry if i'm being too early
18/12/2016
I'm going get the new kernel ready next month which is the new year.
I'm gonna support SM-T113 too next year and continue with it *if it's working*
I'm going to need tester for sm-t113 next year
1/11/2016
enable the usb fast charge using the kernel adiutor app!
Camera are working on the stock kernel but not mine...
The source code for the camera is not exist in the source...
If you wanna connect your device to pc make sure the
USB fast charge is off,if it isn't disabled,you won't able to
manage file on your device through pc
XDA:DevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0
Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
Github
Kernel source
Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24
Created 2016-12-26
Last Updated 2017-12-24
Press the "Thanks" button if you appreciate my work or if i helped you
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
gr9nole said:
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
Click to expand...
Click to collapse
Ok,but what android you are currently using right now?Kitkat or JB?
Changelog:
V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM
V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP
V4.1 update (2017-7-3)
+Just another update for stability
V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*
V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes
V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently
V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes
V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging
V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)
V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed
V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
Fix: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release
V2.6 a.k.a *Almost* New Year Update (2016-12-27)
+Kernel version updated from 3.10.17 - > 3.10.22
+Frequency step changed to make it more stable
+GPU overclocked upto 640Mhz
+CPU-Boost re'added,improve stability and Frequency set
*"Schedule work queues on awake CPU to save power"
\_disabled by default because instability issue on booting but kept as an option in Kernel Adiutor
\_Its pretty unstable so i didn't recommend you to use it
+This updates focus heavily on stabilily,sound,memory and networking
+Zswap Added
+Zbud Added
*Swappiness level turn down to 10 to avoid using swap as much as possible but use it when low memory
\_The reason of me to use swap as low as possible is RAM is faster than swap,so use that for better
\_application loading.
*No more SOD(Sleep Of DEATH) OR FOD(Freezing Of DEATH) as it happen many times on my older kernel
\_but it *may* happen
+Voltage increased for more stability
+Dynamic Sync re'added and enabled by default
+Fsync turn off by default
+Overall entropy tweak
+SIO,SIO-Plus scheduler re'added
-Row scheduler
V2.0 a.k.a November update (2016-11-1)
+1650 mhz re'added and step changes
+Fsync on/off re'added
+Row scheduler re'added
+Intelliactive Governor re'added
+BLX(Battery life extender) added
+Adaptive Governor added
+Lagfree Governor added
+Schedule work queues on awake CPU to save power
+Fixed unused frequencies on kernel adiutor
+Improved networking capability
+Improved memory management
+Improved security so you don't have to install antivirus
+Improved web browsing
+Improved device battery
-Dynamic sync have to go for now
-cpu boost removed because of compability issue
V1.7 (2016-10-15)
+Deferred Timer
+Cpu boost frequency set
+Updated Dynamic sync control
+Interactive governor updated and used as default governor
+HUGE bug fixes (better than before)
-Fsync On/Off (parmanent maybe)
V1.3 (2016-09-25)
+NVS hibernate driver
+LZ4 compression support
+Snappy compression library (v3)
+Many bug fixes(It is very smooth,surprisingly)
+Frequency changed to 1650MHz
-intelliactive governor (for now)
-row i/o scheduler (for now)
-sioplus i/o scheduler (for now)
V1 (2016-09-20)
+Initial Release
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
andynroid said:
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Thunderoar said:
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Click to expand...
Click to collapse
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Thunderoar said:
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Click to expand...
Click to collapse
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
andynroid said:
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
ok,good,gonna start downloading the source code soon[emoji4]
Thunderoar said:
Ok,but what android you are currently using right now?Kitkat or JB?
Click to expand...
Click to collapse
jb 4.1.2 android please
sample werewolf kernel v003 good kernel add your tweaks oc ... thanks
note:I have tab 3 sm-t210 I now test kernel
ı using jb
Thunderous thank you very much for your kernel
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
natttroll said:
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
Click to expand...
Click to collapse
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Thunderoar said:
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Click to expand...
Click to collapse
:good: Thunderoar, i will be waiting for your rom. :fingers-crossed:
Thunderoar your kernel works well, bug kamera.Good luck for omnirom, rom super. (I'm sorry Do not know English, google translate translation).
Thunderoar :good: ,updated kernel i will test.
SM-T116NU
Can this kernel be used for SM-T116NU?
fleomikn said:
Can this kernel be used for SM-T116NU?
Click to expand...
Click to collapse
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Thunderoar said:
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Click to expand...
Click to collapse
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
fleomikn said:
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
Click to expand...
Click to collapse
Ok, what can I help?