Hello folks
Okay. I have had a 1st gen Moto G since March, and have - last week - bought myself the superb 2nd gen Moto G. I have had a flip shell (turquoise) on my first gen, almost since day one. Now I have the 2nd gen, I have just bought myself a "Lemon and Lime" flip shell for it. These cases are very well designed, in most respects, but there are a few discrepancies and issues between the flip shells for each generation. In the video below, I show you both models, and explain as well as I can, the strengths and weaknesses in the design of them.
I hope you find this helpful... and possibly entertaining. Thank you :
Tank you so much for this video, it was really helpfull. I'm actually a fan of the flip cover, but due to the weak magnet I don't think I'll get one fot the Moto G2..
not named said:
Tank you so much for this video, it was really helpfull. I'm actually a fan of the flip cover, but due to the weak magnet I don't think I'll get one fot the Moto G2..
Click to expand...
Click to collapse
Most welcome my friend. Thank you for your comment
Related
Hello,
I have the Razr i and the lack of accessories is killing me. So can anyone tell me what other phones have the same dimensions as the 890? I have seen on here comments about the Razr M being the same, except for the camera button, but also that things won't fit as they have been designed for the M, suggesting sizes are different! So can anyone confirm what's for the M will or won't fit the i? In particular I look at the Otterbox cover for the M and think it'll do the job (bar the camera button cutout)
BTW, I've been on to Motorola UK back in November who assured me the accessories were 'imminent'.
Yeah right..... :laugh:
The M has exactly the same shape as the I .
I do use the official M car dock with my Razr I and it fit perfectly.
Of course for a cover you'll have to cut a little bit if you want to keep an access to the camera button.
Dabooka said:
Hello,
I have the Razr i and the lack of accessories is killing me. So can anyone tell me what other phones have the same dimensions as the 890? I have seen on here comments about the Razr M being the same, except for the camera button, but also that things won't fit as they have been designed for the M, suggesting sizes are different! So can anyone confirm what's for the M will or won't fit the i? In particular I look at the Otterbox cover for the M and think it'll do the job (bar the camera button cutout)
BTW, I've been on to Motorola UK back in November who assured me the accessories were 'imminent'.
Yeah right..... :laugh:
Click to expand...
Click to collapse
Hi,
I can confirm that the Razr M has the same dimensions as Razr I and equipment shaped for M also fits Razr I except the hole for camera button. But if you're looking for cases I must warn you that I've already bought two hard covers and neither of them fits perfectly. The obvious reason is that both RAZRs are wedge shaped and it's hard to hit such shape. Possible solution is in buying soft cases or more expensive ones.
Le_Poilu said:
The M has exactly the same shape as the I .
I do use the official M car dock with my Razr I and it fit perfectly.
Of course for a cover you'll have to cut a little bit if you want to keep an access to the camera button.
Click to expand...
Click to collapse
Thanks for that, the car dock is someting else on my list, if somewhat pricey. :laugh:
piskr said:
Hi,
I can confirm that the Razr M has the same dimensions as Razr I and equipment shaped for M also fits Razr I except the hole for camera button. But if you're looking for cases I must warn you that I've already bought two hard covers and neither of them fits perfectly. The obvious reason is that both RAZRs are wedge shaped and it's hard to hit such shape. Possible solution is in buying soft cases or more expensive ones.
Click to expand...
Click to collapse
That was my concern with the cheaper cases. I usuaulyl keep my phones for a couple of years at least, so a more expensicve case is fair enough, and as the Otterbox jobs are ~£30ish I'd expect a bloody good fit! :laugh:
I've just received my shiny new Moto X from Texas to the UK in just a few days... Thanks Moto.
I was a little underwhelmed by the walnut back that I chose though. It looks... plastic. Bit disappointing really. We have oiled solid walnut worktops in our kitchen and there's a shimmer from the grain of the wood in the light; you can see texture in the grain. The back of my Moto X looks like plastic veneer in comparison.
Looking at the MotoMaker site again, three of the wooden backs are described as 'finish', i.e. "teak finish", "ebony finish", "walnut finish" whereas the bamboo is just "bamboo". Makes me wonder whether Motorola is pulling a bit of a trick here and only the bamboo is actually real.
Can anybody reassure me that my walnut really is walnut? I'll be very disappointed if it's not, since this was the whole reason for choosing this model.
Yes. They are all real wood, but they aren't the actual wood. They are just stained. The only one that's "real" is the bamboo because it's not actually a wood.
So you're saying it's wood... but not walnut?
(Just for my curiosity, how do you know?)
They are all bamboo, just stained
http://www.droid-life.com/2014/01/1...wood-back-finishes-for-ebony-teak-and-walnut/
For the record, your link doesnt say anything to the fact of them all being bamboo.
cbsevenfifty said:
For the record, your link doesnt say anything to the fact of them all being bamboo.
Click to expand...
Click to collapse
You are correct. I read (or misread) that somewhere else.
Thanks for the link, Restola. It's talking about the first-gen Moto X but I don't suppose the new one is much different. What a shame. :-/
Hey everyone,
Does anyone know where to get replacement back panel for the Moto X 2014? I thought I liked the leather, but I'm not sure about it anymore. I would like to try one of the plastic ones, definitely not the wood, I've been seeing some disasters from those. Is it possible at this point without contacting Motorola and their terrible customer service?
Before you post a lmgtfy.com link, I've looked already, and I'm not sure if I don't know what I'm looking for, or what, but I found a few sites...
etradesupply, and I think even Ebay have some parts that could be a potential replacement?
Edit:
Moto XT1095, if that makes a difference.
nyte3k said:
Hey everyone,
Does anyone know where to get replacement back panel for the Moto X 2014? I thought I liked the leather, but I'm not sure about it anymore. I would like to try one of the plastic ones, definitely not the wood, I've been seeing some disasters from those. Is it possible at this point without contacting Motorola and their terrible customer service?
Before you post a lmgtfy.com link, I've looked already, and I'm not sure if I don't know what I'm looking for, or what, but I found a few sites...
etradesupply, and I think even Ebay have some parts that could be a potential replacement?
Edit:
Moto XT1095, if that makes a difference.
Click to expand...
Click to collapse
Just recieved a black one today, have more ordered now..
Also have dbrand skins ordered for the back shells..
Go here >> http://www.ebay.com/itm/25175392573...49&var=550678599913&ssPageName=STRK:MEBIDX:IT
Go here >>http://www.ebay.com/itm/26169798881...49&var=560565152846&ssPageName=STRK:MEBIDX:IT
And Go here >> https://dbrand.com/shop/moto-x-2014
NWKENT said:
Just recieved a black one today, have more ordered now..
Also have dbrand skins ordered for the back shells..
Click to expand...
Click to collapse
How hard is it to change them out?
gotzaDroid said:
How hard is it to change them out?
Click to expand...
Click to collapse
Double sided tape holds the shell on..I have attached a YouTube link, start at about minute 3:00 and you can see the removal process..
The new panel/shells that I have purchased from the eBay link I provided, come with the double sided adhesive already applied..just pull/peel off the plastic covering and apply to device..
Here >> Moto X (2nd Gen): Tear Down and Exploration: http://youtu.be/dweww9_RF2E
Exclusive Moto user since 1989..
XT1080M Droid Maxx Developer Edition
http://waynekent.com/page6.html
"Praise Jah" YOU people.!
Dbrand for leather
Can you use the dbrand skins on the leather? I don't see the adhesive sticking, but what do I know? Lol.
NWKENT said:
Double sided tape holds the shell on..I have attached a YouTube link, start at about minute 3:00 and you can see the removal process..
The new panel/shells that I have purchased from the eBay link I provided, come with the double sided adhesive already applied..just pull/peel off the plastic covering and apply to device..
Here >> Moto X (2nd Gen): Tear Down and Exploration: http://youtu.be/dweww9_RF2E
Exclusive Moto user since 1989..
XT1080M Droid Maxx Developer Edition
http://waynekent.com/page6.html
"Praise Jah" YOU people.!
Click to expand...
Click to collapse
Thanks for the video. I can see why the wood backs are peeling now. I'm totally not going to replace mine if I don't have to, but nice to know about the Sim tray trick.
I have had the Urbane for a week and I have had many people say that it is great looking watch.
Not that anybody should care but I fine the comments nice and I tend to agree.
Had Gear Live, Smartwatch 3 and now this device and it looks great (have stainless steel and black band)
Yup, it's a deceptively sexy device. Much better IRL than in pictures.
It's such a great looking watch, I saw one in person about an hour ago and just ordered one five minutes ago...lol, I even paid $4 for next day shipping from Amazon. SO EXCITED for this one (I am a watchaholic)
I don't agree with you. I think Moto 360 is much more stylish than LG Urbane watch. Both of these smart watches are circle but Moto 360 seems more stylish to me.
Rickyzx said:
I don't agree with you. I think Moto 360 is much more stylish than LG Urbane watch. Both of these smart watches are circle but Moto 360 seems more stylish to me.
Click to expand...
Click to collapse
I think they both look good with a metal band, the Urbane looks much better with one...
moto 360? bulky, black bar, short battery life, i don't know why so many ppl like it... urbane is much better looking for sure.
Love the device, just got it today. Am I safe without a case? If it drops do I risk major damage to the device or the piece on the back that snaps on?
Sent from my MotoG3 using Tapatalk
Yes, is better. Just a bumper. To keep it safe.
Sent from my MotoG3 using Tapatalk
nelsonw said:
Yes, is better. Just a bumper. To keep it safe.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Any recommendations?
Sent from my MotoG3 using Tapatalk
I always use TPU cases. They are not very bulky, don't attract dust/lint and they provide some bump protection. Incipio makes a nice looking one (Motorola sells this) or there are plenty of generic TPU cases out there.
dinosaur1 said:
Any recommendations?
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=62928651
I find it one of the most slippery of all the phones i've owned. When i discovered a crack in the speaker seal, moto asked me if i dropped the phone. Never dropped, don't want to use it without a case. Absolutely need a good case. I made a mistake ordering a nice looking ebay case under $4.00. Now i want to spend $10+ on a quality case.
guest_2011 said:
I find it one of the most slippery of all the phones i've owned. When i discovered a crack in the speaker seal, moto asked me if i dropped the phone. Never dropped, don't want to use it without a case. Absolutely need a good case. I made a mistake ordering a nice looking ebay case under $4.00. Now i want to spend $10+ on a quality case.
Click to expand...
Click to collapse
Haha, just wait until you try the Galaxy S6.
Give a try to Moto G Premium Quality Screen Protector : Anti Glare Matte edition
Needed? Nope.
Desired since you put some cash out for a nice device and you might want to keep it in great condition since it's mainly plastic? Yep, definitely.
As for recommendations, people need to choose the cases they find most appealing and at prices they can afford so I rarely ever go that far. There are quite a few cases available because the Moto G3 is a pretty popular device - the Moto G series are Motorola's best selling phones - so you'll find something to your liking at a good price if you spend time doing the research.
br0adband said:
Needed? Nope.
Desired since you put some cash out for a nice device and you might want to keep it in great condition since it's mainly plastic? Yep, definitely.
As for recommendations, people need to choose the cases they find most appealing and at prices they can afford so I rarely ever go that far. There are quite a few cases available because the Moto G3 is a pretty popular device - the Moto G series are Motorola's best selling phones - so you'll find something to your liking at a good price if you spend time doing the research.
Click to expand...
Click to collapse
Now I hear the Moto G3 might be going away since Lenovo took over.
Sent from my iPhone using Tapatalk
Don't feed the troll :silly:
dinosaur1 said:
Now I hear the Moto G3 might be going away since Lenovo took over.
Click to expand...
Click to collapse
An hour after that misquote from CES someone else from Lenovo put out a press release clarifying that the Moto line of devices is not going anywhere - it's their best selling devices so even though Lenovo has made some stupid decisions over the years (what they're doing to ThinkPads is one of them) they're not THAT stupid as to dump the most popular best-selling hardware devices in the history of their Motorola Mobility purchase.
Another stupid thing? Dropping the Motorola brand name which will happen later this year.
I use a case mostly as a safety measure, but it makes it harder to use it one-handed. :/
Always use a case. The one time I had my case off (it was my old Moto Atrix HD) I dropped it and shattered the screen. I did replace it and had fun doing it but the g3 is a bit harder. I used to use a plain gel case.