{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MODS / TWEAKS / KERNELS AND RECOVERY COLLECTION FOR P7-L10
KERNELS
CWM/TWRP.zips and Fastboot images ( fastboot flash boot boot.img)
HRT-EMUI 2.3 with init.d support
HRT-EMUI 3.0 with init.d support
Stock Kernel EMUI2.3 B136 (Only Fastboot-Image)
Stock Kernel EMUI3.0 B608 (Only Fastboot-Image
DOWNLOAD
RECOVERY
Only Fastboot-Images ( fastboot flash recovery recovery.img)
TWRP by surdu_petru LINK for EMUI 2.3
CWM by HRT-CLUB for EMUI 2.3
CWM by ATX for EMUI 3.0
STOCK Recovery EMUI2.3/3.0
DOWNLOAD
SCRIPTS for EMUI 2.3/3.0
To use with Scriptmanager/Terminalemulator from playstore ore any Fileexplorer that can handle scripts.
If you update youre rom the mods should stay, only when you wipe data you have to re add them.
(NOT ALL SCRIPTS ARE WORKING ON ALL BUILDS! THIS SCRIPTS MAY ALSO WORK ON OTHER HUAWEI PHONES)
1. Call Recording on (EMUI 2.3 needs also phone.apk)
2. Camera Muteable
3. Disable Testinfo
4. Enable IP-Call
5. Enable Glovemode
6. Hide Operatorname
7. NFC On
8. Security Volume 10
9. Simple-UI on
more to come...
DOWNLOAD
CWM/TWRP Flashable Mods EMUI 2.3/3.0
1. External SDCARD write fix
2. Extra Host Installer
NEW
3. View-Cover Fix for EMUI3.0 B602 L10
this fix is for this cover
you can download and flash it over Cwm (this will replace the build.prop on youre rom with fixed one)
or
Extract the Keyguard.apk from the zip, put it in priv-app and overwrite the original
then delete the marked line in build.prop
and ad these lines
reboot and it should work
more to come...
DOWNLAOD
YOU CAN TAKE ANYTHING FROM THIS THREAD FOR YOURE ROM BUT LEAVE CREDITS FOR ME AND TO THE DEV'S
Good job
natorus87 said:
To use with Scriptmanager/Terminalemulator from playstore ore any Fileexplorer that can handle scripts.
If you update youre rom the mods should stay, only when you wipe data you have to re add them.
(NOT ALL SCRIPTS ARE WORKING ON ALL BUILDS! THIS SCRIPTS MAY ALSO WORK ON OTHER HUAWEI PHONES)
6. Hide Operatorname
Click to expand...
Click to collapse
How can i put this script to the phone?
Thanks
jkmaxfli said:
How can i put this script to the phone?
Thanks
Click to expand...
Click to collapse
Download the script and as sample put in download folder of youre sdcard,
than open script manager and select the script from download folder
natorus87 said:
Download the script and as sample put in download folder of youre sdcard,
than open script manager and select the script from download folder
Click to expand...
Click to collapse
Thanks, but dont work: screenshot
jkmaxfli said:
Thanks, but dont work: screenshot
Click to expand...
Click to collapse
did you do this as root?
try this Scriptmanager
I use this script manager .
Root I have and I used it as root.
UPDATE
NEW
View-Cover Fix for EMUI3.0 B602 L10
The hide operatorname script requires /data to be mounted as rw i think. How to do this?
Also, does this work on b602 ?
---------- Post added at 11:21 AM ---------- Previous post was at 11:07 AM ----------
The hide operatorname script requires /data to be mounted as rw i think. How to do this?
Also does this work on b602 ?
Edit
I added the properties manually on buil.prop and it doesnt work on b602
Hi
Is there an option to keep the little screen for smart view case on(active) during a call?
download rootexplorer
revery0 said:
The hide operatorname script requires /data to be mounted as rw i think. How to do this?
Also, does this work on b602 ?
---------- Post added at 11:21 AM ---------- Previous post was at 11:07 AM ----------
The hide operatorname script requires /data to be mounted as rw i think. How to do this?
Also does this work on b602 ?
Edit
I added the properties manually on buil.prop and it doesnt work on b602
Click to expand...
Click to collapse
I recommend you to download root explorer to give permissions of writing and reading to the carpets and files to make any change. this is the download link to the newest application of rootexplorer: https://www.dropbox.com/s/x3g52hdvcftkod2/RootExplorer.apk?dl=0
Godwarrior1 said:
I recommend you to download root explorer to give permissions of writing and reading to the carpets and files to make any change. this is the download link to the newest application of rootexplorer: https://www.dropbox.com/s/x3g52hdvcftkod2/RootExplorer.apk?dl=0
Click to expand...
Click to collapse
I have tried that already but with no effect.
As i said i addad the properties manually to build.prop but carrier name remains...
How can I get root for my B602?
I have a stock recovery
habbaz said:
How can I get root for my B602?
I have a stock recovery
Click to expand...
Click to collapse
I would suggest you to backup with hisuite before downgrading and restore afterwards. /data partition doesnt need to be wiped but there may be conflicts and the easiest way to get rid of them will be to wipe /data.
Better safe than sorry.
revery0 said:
I would suggest you to backup with hisuite before downgrading and restore afterwards. /data partition doesnt need to be wiped but there may be conflicts and the easiest way to get rid of them will be to wipe /data.
Better safe than sorry.
Click to expand...
Click to collapse
Thanks, but when and how I can wipe /data for my Device?
Hi Natorus87
i have installed the CWM_2.3 Recovery but it is in chinese, any possibility to have it in english?
Thanks
It is not possible
v11lemans said:
Hi Natorus87
i have installed the CWM_2.3 Recovery but it is in chinese, any possibility to have it in english?
Thanks
Click to expand...
Click to collapse
It has the two Language options to choose: Chinese or English, maybe you chose Chinese whithout realizing it. I suggest installing another Recovery and reinstall again CWM Recovery and wait until these options appear in the screen when you enter to the program.
Godwarrior1 said:
It has the two Language options to choose: Chinese or English, maybe you chose Chinese whithout realizing it. I suggest installing another Recovery and reinstall again CWM Recovery and wait until these options appear in the screen when you enter to the program.
Click to expand...
Click to collapse
Ok. I already re-installed stock recovery. I will try again and look for the language selection.
Thanks
v11lemans said:
Ok. I already re-installed stock recovery. I will try again and look for the language selection.
Thanks
Click to expand...
Click to collapse
Emui 2.3 Recovery is in chinese Emui 3.0 CWM Recovery comes with 2 languages Chinese and English . Just Swicthed Today to the ATX recovery and found out
andromodgod said:
Emui 2.3 Recovery is in chinese Emui 3.0 CWM Recovery comes with 2 languages Chinese and English . Just Swicthed Today to the ATX recovery and found out
Click to expand...
Click to collapse
Ok. May use CWM for emui 3.0 on emui 2.3?
Related
Main thread + Features + Dev support
http://forum.xda-developers.com/showthread.php?t=2201860
CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.41.6
PhilZ Recovery is a CWM Advanced Edition that adds all the features you could ever miss in CWM.
It is a well proven recovery for many phones.
Please give your feedback, what works, and any bug you could encounter.
Read the features at the Main thread, and check if you are missing something.
To take a screen shot, just slide left!
And don't forget to read about powerful aroma file manager integration and double-tap shortcut (in FAQs).
How to install recovery?
From download link below, you'll get a 'recovery.img' file. Put that recovery.img file at root directory of your
sdcard. (means not in any folder)
Now, go to terminal emulator.
Give command:
Code:
su
You'll be asked to grant superuser permissions, grant it.
Now, give the following command:
Code:
flash_image recoveryonly /sdcard/recovery.img
Wait until it executes the command (4-5 seconds), it is installing the recovery.
Now, normally reboot to recovery and enjoy new recovery!
Download links
Latest version can be found here:
recovery.img (v6.41.6)
https://docs.google.com/uc?id=0B5c3gpyMBJusWi1XN09fZjkzUWM&export=download
aromafm_tass.zip (v1.91)
https://drive.google.com/uc?id=0B5c3gpyMBJusLTk5ZENsNWpudms&export=download
Click to expand...
Click to collapse
Special thanks to:
@Phil3759 : For this awesome open source recovery.
@chraso: For hosting and compatible flags.
AndroidARMv6 Team: For keeping this device alive.
Cyanogenmod Team: For making all these possible.
XDA:DevDB Information
PhilZ-Touch Recovery for Galaxy Mini, Tool/Utility for the Samsung Galaxy Mini
Contributors
Bhargav97, chraso, Phil3759
Version Information
Status: Stable
Current Stable Version: 6.40.1
Stable Release Date: 2014-05-04
Created 2014-05-07
Last Updated 2014-05-26
:FAQs:
Q: Wanna know about Aroma File manager?
Visit the aroma file manager main thread for more info---> Aroma file manager main thread
Aroma file manager is a touch file manager which can be used while in recovery. It has options for copy, paste, delete,
change permissions and many others. Also, it has a Terminal inside. So, if you forgot to give correct permissions to any
file you can do that directly from recovery. This file manager has got many themes, font, icons, etc. options and it's UI
is fully customizable.
Q: How to start this File manager in Recovery?
Rename the downloaded file to 'aromafm.zip'.
Create a folder 'aromafm' inside 'Clockworkmod' folder on your sdcard.
Now, move that 'aromafm.zip' file to the 'aromafm' folder.
We're ready now, when you want to use it in recovery just double tap anywhere OR go to "philz Settings" and select
"Aroma File Manager" and it will start up.
If you also want to browse /data, /system and /sd-ext then mount them in the "mounts & storage" option in recovery.
Q: Problems with Aroma file manager startup?
After doble-tapping OR selecting 'Aroma file Manager' option under 'philz settings' if recovery gives error: 'aromafm.zip
not found at /clockworkmod/aromafm' then, wait for 4-5 seconds and again select 'Aroma file Manager', because it maybe
busy mounting sdcard.
If still doesn't work, you've made mistakes in steps mentioned in first post, please do again carefully.
Q: Does your phone every time reboots to recovery?
This happens very rare when you flash the recovery using any bad app or via any wrong (not proper) method. What you can do
is:
-If you've made a backup of your current ROM then just restore only it's "boot" and then select 'reboot to system'.
OR
-You don't have a backup? Then just flash the ROM which you are using currently again and wipe 'dalvik-cache'. Then reboot
to system. Booting process will take time.
NEW: Now you can enjoy the full version of the recovery! Thanks to @Phil3759 for uploading necessary commits for armv6. And, everything is expected to be bug-free. Please report the bug here if you find any.
GALAXY MINI GOES OFFICIAL NOW!!!!!!
You'll now find Galaxy Mini in the officially supported devices list at the Main thread.
SCREENSHOTS:
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original
cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
alexanderq said:
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
Click to expand...
Click to collapse
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Faiyaz5yaz said:
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Click to expand...
Click to collapse
You mean, you are always rebooting to recovery and not to your rom?
If so, it is a problem of your device configuration by your device developer because this happens also in Jenkins recovery. This is not a fault of my recovery.
Now, you can restore boot of a backup (if you made any) or you can install your current rom again and wipe dalvik cache and you'll be back normal.
But i have renamed the zip and it does not work.And i tried another ROM but it all ways reboots to recovery.
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Good work bro.:thumbup:
Sent from my GT-S5570 using xda premium
no
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I didn't restore back up..
I reflashed my previous cwm..
it booted normally
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I confirm it. I even flashed another ROM and it still reboots to recovery instead of system.
Aroma FM works, but there is something I noticed: If you tap internal sd or external sd, they are empty, you have to go to storage/sdcard00 to get to your sd card. Can you somehow link the external sd to the sd card?
Thanks everyone for reporting....
I'll try to fix this when I get time...
ast00,
Internal sd and External sd will be empty because they are kept there for devices having two different memories. There should be an option: sdcard directly on the root directory. Please see carefully.
Good news:
My friend @chraso gave me hint about the problem. There was a very small problem with tags, I'll be fixing and making updated recovery today/tomorrow. Will also update recovery sources.
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Bhargav97 said:
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Click to expand...
Click to collapse
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Faiyaz5yaz said:
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Click to expand...
Click to collapse
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Does not work for me either, it reboots to recovery and i noticed that to make aroma work i must first install the zip from recovery and then it works OK .
not that
Bhargav97 said:
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Click to expand...
Click to collapse
I mean I just changed the recovery didn't touch any roms.. after changing recovery , it keeps bootin to the recovery
Bro,
please read FAQs, this is a problem of your device sources. For solution, see FAQs.
After that, please give me broader report.
You di not ask the right question:
Does this work for someone , anyone please confirm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.124 BETA or newer.
Current rooted FW version: 17.1.A.0.55 or 17.1.A.0.69.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.124 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 17.1.1.A.0.402:
Files (Find the files on the DevDB Downloads tab!):
For D6502: Download D6502_17.1.1.A.0.402.flashable.zip (931MB) and D6502_17.1.1.A.0.402_Stripped.ftf (23MB)
For D6503: Download D6503_17.1.1.A.0.402.flashable.zip (912MB) and D6503_17.1.1.A.0.402_Stripped.ftf (22MB)
Save them somewhere you remember;
Put 'D650X_17.1.1.A.0.402.flashable.zip' on (the external) SDcard1;
Put 'D650X_17.1.1.A.0.402_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'D650X_17.1.1.A.0.402.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'D650X_17.1.1.A.0.402_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore a .55 or .69 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][D650X][4.4] Update to 17.1.1.A.0.402 [Root & XZDR], ROM for the Sony Xperia Z2
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 17.1.A.2.55/.69
Based On: STOCK
Version Information
Status: Abandoned
Stable Release Date: 2014-06-17
Beta Release Date: 2014-06-16
Created 2014-06-16
Last Updated 2014-08-26
ROM STATUS: STABLE
WARNING:
Be prepared to lose everything if it for some reason goes belly up!
Huzzah! Thanks for your hard work, @[NUT]! You were there since the beginning, and without you (and the others) this wouldn't be possible!
Just out of curiosity, what's the base FTF for this ROM?
How do I get TWRP to start instead of CWM?
hidea said:
Huzzah! Thanks for your hard work, @[NUT]! You were there since the beginning, and without you (and the others) this wouldn't be possible!
Just out of curiosity, what's the base FTF for this ROM?
Click to expand...
Click to collapse
D6502 is based on Customized_IN
D6503 is based on Customized_DE
Puffin617 said:
How do I get TWRP to start instead of CWM?
Click to expand...
Click to collapse
Press volume down to enter twrp.
Puffin617 said:
How do I get TWRP to start instead of CWM?
Click to expand...
Click to collapse
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
[NUT] said:
D6502 is based on Customized_IN
D6503 is based on Customized_DE
Press volume down to enter twrp.
Click to expand...
Click to collapse
BTW, the only backup options I see in TWRP are:
Kernel Image
Trim Area
System
Cache
Data
I don't see SDCard
funky0308 said:
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
Click to expand...
Click to collapse
where I can find the NUT app?
pacomicro said:
where I can find the NUT app?
Click to expand...
Click to collapse
If I'm reading this correctly,
The default on first boot with the boot-to-recovery flag set by any recovery is PhilZ Touch Recovery.
In your XZDualRecovery folder in either /cache or /storage/sdcard1 you will find a file called XZDR.prop. Set dr.default.recovery=cwm to dr.default.recovery=twrp to change the default recovery to TWRP. The button choice however takes precedence, so you can always overrule the default!
You can also change back to 'Vanilla CWM' if you wish by changing dr.vanilla.cwm=false to dr.vanilla.cwm=true in the XZDR.prop file.
Init.d support is disabled by default, set dr.enable.initd to true to enable it.
Insecure ramdisk support is disabled by default, set dr.insecure.ramdisk to true to enable it, set to 'power' to boot it by pressing the power button at boot.
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showthread.php?t=2261606
pacomicro said:
where I can find the NUT app?
Click to expand...
Click to collapse
Once you're done with flashing all the files and reboot your phone, you will see a new app installed. That's [NUT]'s app.
funky0308 said:
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
Click to expand...
Click to collapse
Cant get it to work... Do I really NEED to use TWRP? PLease help...
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Something is not right. When I keep VOL down with reboot the device stays black
UPDATE : Got everything done Thanks
Am on 402 rooted without even touching the bootoader
@[NUT]
OK mate...
Awesome work
Ahh, yes. @[NUT] app is actually in the app drawer, and it's called NDR Utils. The icon is a cute red little devil! The app will let you choose which primary (default?) recovery to use. Also, has a bunch of power menu options.
Now… slightly off topic; will we be seeing a similar XZDR and ROM for the Z2 tablets (particularly the 16GB WiFi/SGP511)?
Again, thanks for the good work, @[NUT]!
Super!!
Fantastic!! Downloading files to downgrade first and then will test this!! Excited and will report back in 3-4 days due to slow bandwidth speeds!
It works! Woohoo!
I'm happy to report that I went through the entire process (downgrade to .55, rooted via Community RootKit, installed dualrecovery, then flashed [NUT]'s files) and I'm on 402 with locked bootloader and everything's working well so far! :good::laugh::highfive:
Guys, AWESOME work...
Being on .402, rooted, TA backed up, locked, seems almost unreal
ok everything went well but i have no network signal just a red cross next to the icon
Strangeland16 said:
ok everything went well but i have no network signal just a red cross next to the icon
Click to expand...
Click to collapse
What model? Did you flash the entire ftf as instructed?
hidea said:
Now… slightly off topic; will we be seeing a similar XZDR and ROM for the Z2 tablets (particularly the 16GB WiFi/SGP511)?
Click to expand...
Click to collapse
I'm working on the Recovery at least, using my DIY guide some brave and helpful soul should be able to create a package then.
Strangeland16 said:
ok everything went well but i have no network signal just a red cross next to the icon
Click to expand...
Click to collapse
Try to go to Settings -> More -> Internet settings and download your network settings.
[NUT] said:
What model? Did you flash the entire ftf as instructed?
d
I'm working on the Recovery at least, using my DIY guide some brave and helpful soul should be able to create a package then.
Click to expand...
Click to collapse
im on d5603 and yes followed instructions to the letter but the phone finds no network
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My-ROM based on B135 (Israel)
System is slimmed down with unnecessary applications and add-ons.
Decided to based project on this release because at this moment B135 this is better system on P7-L10.
After installation You will have a stable, light, fast and no battery drain system fully accessible and fully rooted .
Just see how efficiency could be MyROM with smart regulations .
Impressive ?
MyROM current version: v1.2
Features:
Custom boot animation
Removed unwanted apps
External SdCard fixed (Xposed module)
Rooting possibility (on demand)
Removed set_immutable.list (full rooted)
Working 4G/3G/2G network mode
Android L Navbars installed
Hiding navbars enabled
Double tap status bar to screen of (Xposed module)
EMIU3.0 File Manager installed
Some other changes...
If You have any suggestions report here
Preinstalled add app:
AddAway (advertisement gone)
Xposed with some modules (some useful add-ons)
Holo Light Reboot (easy reboot)
SuperSU (full root)
Changelog v1.2:
Slimmed ROM to ~ 585MB
Optional gaps are excluded to separate installation by zip file (MyROM_add-gapps.zip)
Optional gaps can by uninstalled by user
Theme bug removed
Attention ! Version v1.2 required clean and carefully installation !
Known bugs:
If You found report here
Requirements:
Bootloader unlocked
How to install:
Clean installation (recommended):
Backup your important data (I recommend to use Huawei Backup application)
Download a package and unpack files to external SD card
If You have TWRP 2.8.1.0 installed (not earlier !) go to the next point. Other case:
Install Fastboot and ADB on Your PC.
Reboot device into Bootloader mode (press power and vol- buttons),
Flash TWRP command: Fastboot flash recovery TWRP-2.8.1.0.img
Reboot device to Recovery mode (press power and vol+ buttons)
Go to Advanced wipe and wipe: Dalvik, System, Cache, Data, Custom storage and optionally but recommended Internal memory
Install ROM (p7-l10_MyROM_v1.x.zip)
Install SuperSU (UPDATE-SuperSU-v2.16.zip)
Install Added gapps (MyROM_add-gapps.zip)
Reboot and configure system
Restore from backup settings and user applications (but only user app!) *.
*- If you use HwBackup I suggest to restore all app to internal memory. (Backup->Settings option)
Update (only from MyROM):
Download a package and unpack files to external SD card
Reboot device to Recovery mode
Install ROM (p7-l10_MyROM_v1.x.zip)
Install SuperSU (UPDATE-SuperSU-v2.16.zip)
Install Added gapps (MyROM_add_EMUI3.0_gapps.zip)
Go to Advanced wipe and wipe: Dalvik cache and Cache
Reboot and configure system
Optionally: (If You installed Added gapps)
Open AdAway. install host files to advertisement blocking
Open XPosed and install framework and check in preinstalled module.
Go to Settings->Disable resource hooks and check it !!
Removed applications
If here are people who are missing for Huawei and Google applications I prepare package with some removed app. Package consist:
Google Drive
Huawei Browser (non uninstallable)
Swype for Huawei
Google Search
Google Music Play
Install it by TWRP. All applications (exception one) can by easily uninstalled by user.
Have fun ! and If you like my project just press Thanks button
Credits:
Huawei !
XDA users !
Everyone who compiled at least one line of included aps !
-------------------------------------------------------------------------------------------------
XDA:DevDB Information
MyROM, ROM for the Huawei Ascend P7
Contributors
Ziolek67
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: B116,B121,B133,B136,B138 or later
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-11-25
hello,
at the sight of your rom, what changes compared to Se7en rom? because I do not see too much change
reply
can u just plz remove the carrier name that would be amazing, cuz my carrier name is too long
Help me pls
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Good work man :good:
Godwarrior1 said:
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Click to expand...
Click to collapse
Use My Guide Link to Guide
Just FLash Stock Recovery and FLash Cust.img and Then Do 3 Button Force Upgrade
Godwarrior1 said:
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Click to expand...
Click to collapse
http://forum.xda-developers.com/ascend-p7/general/roll-to-emui-2-3-p7-l10-l10-t2935025
And where is this menu settings like on your screen?
I have default themed settings menu and after using MixLol theme nothing change.
Good rom but....
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? In the other custom roms I have tested do not show this message , I followed all procedures you recommended for the installation !!!!
jkmaxfli said:
And where is this menu settings like on your screen?
...
Click to expand...
Click to collapse
Which screen do You mean ? Because there's four screens in this image. But is irrelevant which theme You use. This is standard menus.
Godwarrior1 said:
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? ...
Click to expand...
Click to collapse
This message appears in many ROMS after incomplete/not exactly installation. I think (but not sure) that is custom storage problem.
I had this message two times in the past with others ROMS. I always had to reinstall ROM after exactly wiping custom storage.
Another way is to flashing custom storage (original) by Fastboot. It was always resolving this issue for me.
How???
Ziolek67 said:
Which screen do You mean ? Because there's four screens in this image. But is irrelevant which theme You use. This is standard menus.
This message appears in many ROMS after incomplete/not exactly installation. I think (but not sure) that is custom storage problem.
I had this message two times in the past with others ROMS. I always had to reinstall ROM after exactly wiping custom storage.
Another way is to flashing custom storage (original) by Fastboot. It was always resolving this issue for me.
Click to expand...
Click to collapse
What is the command I should use for flashing custom storage ??? I tried using "fastboot -w" without success
Godwarrior1 said:
What is the command I should use for flashing custom storage ??? I tried using "fastboot -w" without success
Click to expand...
Click to collapse
Fastboot flash cust cust.img
Sorry but....
Ziolek67 said:
Fastboot flash cust cust.img
Click to expand...
Click to collapse
There are a lot of cust files to download around here, What cust should I use for your rom????, can you give me a link or upload the cust to me please. You are a very kind person. thanks !!!!:fingers-crossed:
Godwarrior1 said:
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? In the other custom roms I have tested do not show this message , I followed all procedures you recommended for the installation !!!!
Click to expand...
Click to collapse
This is Not Due to Custom Storage !
To Fix This , Find This Line in Build.prop
ro.config.hw_showTestInfo=
Click to expand...
Click to collapse
It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
little arrow to hide navigation bar
Definitely a perfect job , but I still for each modified rom lack basic thing and that is an little arrow in the left corner of the navigation bar to hide the navigation bar.
Please put it there .
thank you
andromodgod said:
This is Not Due to Custom Storage !
To Fix This , Find This Line in Build.prop It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
Click to expand...
Click to collapse
My setting is true but this reminder isn't showing [emoji14]
Sent from my HUAWEI P7-L10
It worked for me
Ziolek67 said:
My setting is true but this reminder isn't showing [emoji14]
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
To Fix This , Find This Line in Build.prop It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
Thanks developer "andromodgod", I went to the editor and changed the position for false and after booting the message dissapeared forever. :good: I recommend using root explorer to give root w-r permissions and make these changes, here is the link
for the file: https://www.dropbox.com/s/ru2g1jl2z240m9z/RootExplorer%20A3.0%2B%20v3.1.9.apk?dl=0
Hi,
New version MyROM v1.1 released. Some requested feature applied. For details just read changelog in first post.
Themes do not work
Ziolek67 said:
Hi,
New version MyROM v1.1 released. Some requested feature applied. For details just read changelog in first post.
Click to expand...
Click to collapse
I have the necessity to give you feedback of your rom Myrom 1.1, when I wanted to change the default theme for my favorite theme, it does not change anything at all. The interface, the background, the icon remain in the same shape, color and position. Please correct this because I started loving this rom....
Godwarrior1 said:
I have the necessity to give you feedback of your rom Myrom 1.1, when I wanted to change the default theme for my favorite theme, it does not change anything at all. The interface, the background, the icon remain in the same shape, color and position. Please correct this because I started loving this rom....
Click to expand...
Click to collapse
Hm... on my device it work perfectly. Do you updated ROM or clean installed ?
If updated did you wipe dalvik cache and cache by recover?
Did you clean cache by Phone manager ?
If you still have a problem than:
Use Root Explorer and remove/delete MixLol.hwt from rot\system\themes folder and restart and clean cache by Phone manager.
Maybe You have doubled theme "MixLol.hwt" ? One on SD card and the second in system folder because in this version I installed this theme as official (inside system)
Unofficial release -TWRP recovery for the Galaxy A3 SM-A320F/FL/Y, Exynos7870
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update 11/9/2017
TWRP 3.1.1-1 MM build released.
Current status: BETA
Features:
MTP
ADB
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
NTFS support
F2FS support >> To be added
TWRP Official APP support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory images from the official firmware can now be flashed with TWRP instead of ODIN. I have extended this feature to include BOOT, RECOVERY, SYSTEM, CACHE, HIDDEN and RADIO(MODEM) partitions.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.
NOTE: To flash the modem, first it needs to be renamed to modem.bin.img
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.1.1-1_sm-a320f_11917
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
To disable forced encryption and mount internal storage:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
no-verity-no-encrypt_ashyx
Twrp Source : https://github.com/omnirom/android_bootable_recovery
Kernel source : http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=Sm-a320f
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.
Reserved.
If anyone has successfully installed this, I'd appreciate if they could post the recovery.log so I can look it over.
Log can be pulled in twrp under ADVANCED/SAVE RECOVERY LOG or on a rooted device go to cache/recovery/last_log
Thanks.
Blimey can no-one find the time to help out here?
I'd love to test this, but first I have to figure out why flashfire isn't working for me.
It only restarts after 20 seconds or so of white text and black background scrolling down, but no backups are written, only a log.
F157 said:
I'd love to test this, but first I have to figure out why flashfire isn't working for me.
It only restarts after 20 seconds or so of white text and black background scrolling down, but no backups are written, only a log.
Click to expand...
Click to collapse
It's already confirmed working I just need someone to post the recovery.log.
40 downloads since posting but no-one willing.
Hello, thank you very much, it worked for me. It was important so I can make a backup of the system. How can I post the recovery log? If you give me the procedure I'll do it.
patci32 said:
Hello, thank you very much, it worked for me. It was important so I can make a backup of the system. How can I post the recovery log? If you give me the procedure I'll do it.
Click to expand...
Click to collapse
Thanks, you're the only one to have made the effort!
You can save the recovery log from TWRP if you go to ADVANCED> SAVE RECOVERY LOG or you can boot to android and go to cache>recovery>last_log.
Please don't post the output here, post as a file or save the output on pastebin.com.
Thanks.
ashyx said:
Thanks, you're the only one to have made the effort!
You can save the recovery log from TWRP if you go to ADVANCED> SAVE RECOVERY LOG or you can boot to android and go to cache>recovery>last_log.
Please don't post the output here, post as a file or save the output on pastebin.com.
Thanks.
Click to expand...
Click to collapse
Here it is.
patci32 said:
Here it is.
Click to expand...
Click to collapse
Nothing there?
ashyx said:
Nothing there?
Click to expand...
Click to collapse
Yes sorry, it says network error when I try to attach the file!
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
I can send it to you by email
patci32 said:
Yes sorry, it says network error when I try to attach the file!
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
I can send it to you by email
Click to expand...
Click to collapse
You can post it here :
http://www.tinyupload.com/
ashyx said:
You can post it here :
http://www.tinyupload.com/
Click to expand...
Click to collapse
Here you go : http://s000.tinyupload.com/index.php?file_id=17704648158807479484
Thanks for your work. An information about my use : when I made a backup, I got a lot of errors like unable to mount the sd card and in the end "back up failed". But the 3 GB file has been created in the right folder, I think I got my backup.
patci32 said:
Here you go : http://s000.tinyupload.com/index.php?file_id=17704648158807479484
Thanks for your work. An information about my use : when I made a backup, I got a lot of errors like unable to mount the sd card and in the end "back up failed". But the 3 GB file has been created in the right folder, I think I got my backup.
Click to expand...
Click to collapse
No idea what's going on with tiny upload. Clicking the download link just downloads the html data of the web page not the actual file!
Thanks for trying any way.
By the way you can't back up data until you remove encryption.
ashyx said:
No idea what's going on with tiny upload. Clicking the download link just downloads the html data of the web page not the actual file!
Thanks for trying any way.
By the way you can't back up data until you remove encryption.
Click to expand...
Click to collapse
You mean I can't use the save file right now ? How do I remove encryption?
patci32 said:
You mean I can't use the save file right now ? How do I remove encryption?
Click to expand...
Click to collapse
See the OP.
ashyx said:
See the OP.
Click to expand...
Click to collapse
I dont get it I'm sorry. I got the save file, you're saying that I can't use it? I should be able to use the file with the restore section no ?
patci32 said:
I dont get it I'm sorry. I got the save file, you're saying that I can't use it? I should be able to use the file with the restore section no ?
Click to expand...
Click to collapse
If the data partition is encrypted then it wont have backed up. The rest of the partitions will have been backed up.
This is the failure you saw when backing up.
ashyx said:
If the data partition is encrypted then it wont have backed up. The rest of the partitions will have been backed up.
This is the failure you saw when backing up.
Click to expand...
Click to collapse
OK understood. Data partition is the sd card or the internal memory ? I assume that the encryption exists for security reasons. Is there anyway to backup everything without desactivating it?
patci32 said:
OK understood. Data partition is the sd card or the internal memory ? I assume that the encryption exists for security reasons. Is there anyway to backup everything without desactivating it?
Click to expand...
Click to collapse
It's internal memory.
For those who encounter a bootloop because of a Magisk Module or got a bootloop during an update because of a module
This will allow you to go and delete that bad module and allowing you to boot back into the OS
What you need:
Recommended TWRP from TWRP 3.3.1-xx Unified Unofficial by mauronofrio
**Official TWRP may not allow you to boot twrp.img**
OOSNativeCallRecording Module seems to be one culprit. Make sure to Uninstall before updating.
If you already have twrp then go to Instructions
If you do not have TWRP and do not want to Install, use this method
Boot to TWRP (for those of us who do not install TWRP)
Does not work with OxygenOS 9.5.3 and below
Make sure to have adb and fastboot files here
1. Download the TWRP image (not Installer) from post above
2. Boot to fastboot
3. Rename TWRP image to twrp.img and move to folder with adb and fastboot files (after you had extracted)
4. Type
Code:
fastboot boot twrp.img
Instructions
1. Boot to TWRP
2. Go to Advanced > File Manager > data > adb > modules
3. click on the folder of the module you want to delete
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. while inside that folder click on the little folder on the bottom right with the check mark on it
5. click Delete
Done... Reboot back to OS without a bootloop
you should add what to do if you can't boot twrp. Happened to me after I removed Google dialer framework. Only thing I could get it to is bootloader. would not let me fastboot TWRp. I got an error every time. I had the flash boot image
mac796 said:
you should add what to do if you can't boot twrp. Happened to me after I removed Google dialer framework. Only thing I could get it to is bootloader. would not let me fastboot TWRp. I got an error every time. I had the flash boot image
Click to expand...
Click to collapse
This happened to me the other day. Took me an hour to figure out that all I had to do was fastboot boot.img.
diaztradeinc said:
This happened to me the other day. Took me an hour to figure out that all I had to do was fastboot boot.img.
Click to expand...
Click to collapse
I will update it shortly, thank you for the feedback.
Bradl79 said:
For those who encounter a bootloop because of a Magisk Module or got a bootloop during an update because of a module
This will allow you to go and delete that bad module and allowing you to boot back into the OS
What you need:
TWRP from here
If you already have twrp then go to Instructions
If you do not have TWRP and do not want to Install, use this method
Boot to TWRP (for those of us who do not install TWRP)
Does not work with OxygenOS 9.5.3 and below
Make sure to have adb and fastboot files here
1. Download the TWRP image (not Installer) from post above
2. Boot to fastboot
3. Rename TWRP image to twrp.img and move to folder with adb and fastboot files (after you had extracted)
4. Type
Code:
fastboot boot twrp.img
Instructions
1. Boot to TWRP
2. Go to Advanced > File Manager > data > adb > modules
3. click on the folder of the module you want to delete
4. while inside that folder click on the little folder on the bottom right with the check mark on it
5. click Delete
Done... Reboot back to OS without a bootloop
Click to expand...
Click to collapse
Just install the magisk module "Magisk Manger for Recovery".... Done. No need for such long instructions...
matze19999 said:
Just install the magisk module "Magisk Manger for Recovery".... Done. No need for such long instructions...
Click to expand...
Click to collapse
It's actually pretty simple, u just have to provide more instructions for people who haven't used twrp. There is no need to flash anything, ik that the uninmod does not work and I thought I tired mm and could not get it working either.
I use MM for TWRP since years and it always worked perfectly.
matze19999 said:
I use MM for TWRP since years and it always worked perfectly.
Click to expand...
Click to collapse
Have u used it with ur 7Pro yet? I tried it yesterday and would not flash along with uninmod would not mount magisk, I think it's issues with dual partition bc it did the same with my OP6
Bradl79 said:
Have u used it with ur 7Pro yet?
Click to expand...
Click to collapse
yeah. Whats not working for you?
matze19999 said:
yeah. Whats not working for you?
Click to expand...
Click to collapse
Got error when flashing, would u mind sharing the file?
Bradl79 said:
Got error when flashing, would u mind sharing the file?
Click to expand...
Click to collapse
I got the one to install from the download section but I've never used it I'm not sure how it works
He's right uninmod and stuff like that doesn't work at all now. It's unable to mount magisk.img it seems to be an issue with our twrp.
As for the statement about the issue being dual partitions that's wrong it's has nothing to do with that. I know he mentioned that uninmod and others did not work on op6 as well.. But it did cause I used uninmod on my 6 and 6T. This is an issue with this device only and possibly the twrp we have currently.
You saved my ass today! I updated to 9.5.9 and had bootloops. I forgot to disable my magisk modules :silly:
equlizer said:
You saved my ass today! I updated to 9.5.9 and had bootloops. I forgot to disable my magisk modules :silly:
Click to expand...
Click to collapse
Are u using OOSNativeCallRecorder module?
Yes i was using it. Just re-installed it.
Saved my ass!
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
So do we need to disable modules before updating? The re enable after?
spart0n said:
Saved my ass!
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
So do we need to disable modules before updating? The re enable after?
Click to expand...
Click to collapse
Duh what you think? Lol naw for real tho...I've learned that after updating never reinstall mods that aren't up to date with the current os....I can't speak for all mods but magisk roms like renovate ice needs to be updated to the current os or problems will occur....I'm a noobish noob but I learned my lesson
mlock420 said:
Duh what you think? Lol naw for real tho...I've learned that after updating never reinstall mods that aren't up to date with the current os....I can't speak for all mods but magisk roms like renovate ice needs to be updated to the current os or problems will occur....I'm a noobish noob but I learned my lesson
Click to expand...
Click to collapse
Well what I'm getting at is that I deleted all 4 of my magisk mods and fixed the bootloop and then reinstalled all 4 of them and rebooted and everything is fine now. I was asking about should we disable all mods, reboot, update, install magisk, reboot, check root with magisk then reinstall all mods and reboot again?
equlizer said:
Yes i was using it. Just re-installed it.
Click to expand...
Click to collapse
You prob only need to Uninstall that next time b/c that is one that is causing issues. I do not use and I have multiple Modules that survive update not needing to uninstall all modules.
Thanks. I had problem with pernament bootloop after magisk instalation.