[SOUNDMOD] SOUND EXPLOSION [LOLLIPOP/KITKAT]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THE SOUND THAT YOU'VE NEVER HEARD ON YOUR ONEPLUS ONE!
DESCRIPTION:
- sound mode based on BBE, SRS, VRS
- ported sound processing from one of the best music smartphones Vivo Xplay 3s
- high quality audio
- enabled 24 bit 96 kHz playback
- System wide (works in all apps)
Recommendations:
- recommended to listen to music without any equalizer
(I use in my mode fully ported sound processing from the best music smartphone BBK Vivo Xplay 3s. You don't need equalizer at all.)
In the headphones without Equalizer:
- impressive sound with the overall clarity, natural not artificial
- perfect sound detailization and contrast
- definitive sound channels separation
- wide stereo field
- audio experience like in the theater space
- low harmonic distortion
REQUIREMENTS
- ROM without any sound mods
- WILL NOT WORK WITH MAXXAUDIO so please disable before flashing (DSP or audiofx apk)
- Please make sure you have a backup before flashing the mod so that you can restore if you don't like it or have problems
INSTALLATION:
- please make nandroid backup of your ROM
- install mod in custom recovery
- wipe cache and dalvik cache
CREDITS:
DOC3000 - for original mod & guidance
tsalta - for help and ideas
Androidexpert35 - for optimising the mod to work properly
DOWNLOAD SOUND EXPLOSION
If you don't get good quality sound on KitKat with this mod then try this old KitKat Version
OMG. And here I thought that I was the last person on xda still using cm11.
Anyways Thanx.
when you say Mahdi 2.9,you mean 11/3 build.
zodiaxe66 said:
OMG. And here I thought that I was the last person on xda still using cm11.
Anyways Thanx.
when you say Mahdi 2.9,you mean 11/3 build.
Click to expand...
Click to collapse
Hahaha yeah 11/3. Please try it and let me know how it goes, I would love to hear your feedback. Hopefully you'll love it [emoji16]
Ergo Proxy said:
Hahaha yeah 11/3. Please try it and let me know how it goes, I would love to hear your feedback. Hopefully you'll love it [emoji16]
Click to expand...
Click to collapse
Will try it tomorrow.you know,charge phone/disable V4A /backup and blabla.:angel:
I'll let you know
Tested on SlimKat 4.4. Not working (stuck at boot)
zodiaxe66 said:
OMG. And here I thought that I was the last person on xda still using cm11.
Anyways Thanx.
when you say Mahdi 2.9,you mean 11/3 build.
Click to expand...
Click to collapse
Lol. Nopes, I am also still on 4.4.4 with Calkulins modified CM11s. I don't really see a need to go to Alpha and Beta stage lollipop roms. Will switch when stable releases start rolling.
I haven't tried this mod yet but one question though. Does it effect speaker output too? or its more targeted towards earphone/headphone listening experience?
enaybee said:
Lol. Nopes, I am also still on 4.4.4 with Calkulins modified CM11s. I don't really see a need to go to Alpha and Beta stage lollipop roms. Will switch when stable releases start rolling.
I haven't tried this mod yet but one question though. Does it effect speaker output too? or its more targeted towards earphone/headphone listening experience?
Click to expand...
Click to collapse
Well I only really focused on headphones quality but it should of affected the speaker quality too, I didn't really take note on the speakers
estufu said:
Tested on SlimKat 4.4. Not working (stuck at boot)
Click to expand...
Click to collapse
Thanks for trying it out, if you want I can make a generic mod that will work on all 4.4.4 roms but the sound won't be as good. If you can upload your framework file for me I can get it working for you.
If anyone else wants me to make this work for their Rom please tell me.
Ergo Proxy said:
Well I only really focused on headphones quality but it should of affected the speaker quality too, I didn't really take note on the speakers
Click to expand...
Click to collapse
Flashed this on Calkulin's ROM and now stuck on spinning CM boot logo.
enaybee said:
Flashed this on Calkulin's ROM and now stuck on spinning CM boot logo.
Click to expand...
Click to collapse
I've now added a generic mod that should work on all cm11 roms
is there a cm12 version of this?
nuwan32 said:
is there a cm12 version of this?
Click to expand...
Click to collapse
I'm afraid not, the mod is based on xplay 3s and the device hasn't yet received lollipop so until I can't really do anything [emoji53]
so with this mod i could erase v4a ? it does a really good effect?
i have already abhi mod for microphone fix + stereo mod, how could i hold this mod and plus install yours?
miloita said:
so with this mod i could erase v4a ? it does a really good effect?
i have already abhi mod for microphone fix + stereo mod, how could i hold this mod and plus install yours?
Click to expand...
Click to collapse
Yeah try it without v4a, if you upload your mixer_path.xml found in /system/etc, I will modify it so you will keep microphone fix + stereo mid
Ergo Proxy said:
Yeah try it without v4a, if you upload your mixer_path.xml found in /system/etc, I will modify it so you will keep microphone fix + stereo mid
Click to expand...
Click to collapse
thanks, you can download it from here:
http://forum.xda-developers.com/attachment.php?attachmentid=3135506&d=1422316883
Updated sound mod - it will now check to see if you're using mahdi rom or not and flash files accordingly. Also the mod will now edit mixer_paths instead replacing it so your other mods (camera, speaker, mic, etc) will still work.
Ergo Proxy said:
Updated sound mod - it will now check to see if you're using mahdi rom or not and flash files accordingly. Also the mod will now edit mixer_paths instead replacing it so your other mods (camera, speaker, mic, etc) will still work.
Click to expand...
Click to collapse
works like a charm man! thank you really much, and the previous mod is kept! so perfect work! u are the man!
miloita said:
works like a charm man! thank you really much, and the previous mod is kept! so perfect work! u are the man!
Click to expand...
Click to collapse
Thank you for your feedback! [emoji16] I've been working on this for months lol
Ergo Proxy said:
Thank you for your feedback! [emoji16] I've been working on this for months lol
Click to expand...
Click to collapse
it's a big improvement from stock. but if you have viper4android with precise settings ( there is a guide somewhere ) , the improvement is not so big from that version. but having a mixer_path modified is better than having a EQ app! so i approve your work thanks!
miloita said:
it's a big improvement from stock. but if you have viper4android with precise settings ( there is a guide somewhere ) , the improvement is not so big from that version. but having a mixer_path modified is better than having a EQ app! so i approve your work thanks!
Click to expand...
Click to collapse
Not sure if you're using Mahdi Rom but it sounds even better on it [emoji12]
No i'm on cm11s and i'm satisfied with pistons headphones! Power! Lol
Related
A bunch of mods for download
AIO = Working but A2DP not working
Everything else should be fine the walkman mod is optimized for Kitkat
But I haven't tried on any other firmware below 4.4.2
All mods should work on all ROMs and devices but these are mainly optimised for P880 so bare this in mind
Please Enjoy and I hold no responsibility at all as it has been tested
If DSP FC's just delete/uninstall DSP manager I will update thread later on
DOWNLOADS
AIO = https://app.box.com/s/aan28ftokm1nd59v4b21
=Working but if you need A2DP don't flash as Audio doesn't work at all with Bluetooth and sorry about this
Although alternative method is Flash single Bravia 3 Mod and the New audio mod which is walkman this Saturday AIO Mod will be kept up but may not get updated as fact I can't test with a Bluetooth headset or device etc... So I will make a single Xloud mod to give great audio but shouldn't break the A2DP Audio
NEW AUDIO MOD (Walkman App)= https://app.box.com/s/co0pplmeovkx0w41namt Works Awesomely but may not work below KK I had friend try it out on 4.2.2 on Acer liquid smooth flashed fine but no walkman app or anything showed up may work on 4.3 and above if not then just KK sorry about this I may try bring a JB version out
Please add the ro.semc.clearphase.supported=true
ro.semc.xloud.supported=true
To build prop I believe this may not be needed
BRAVIA 3
https://app.box.com/s/jbdeew16g5rq4hikvmpu
PERFORMANCE MOD POPTART is a little further down
New Audio Mod Uploaded
POPTART PERFORMANCE MOD = BETA
POPTART DOWNLOAD
https://app.box.com/s/cj5drs2wyldbq3802lzw
May improve benchmark scores also may decrease benchmark scores my device seems a lot smoother but benchmarks dropped
This is beta and take no responsibility for anything that happens to you or your devices
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUILD PROP AUDIO TWEAK
ro.semc.clearphase.supported=true
ro.semc.xloud.supported=true
must be added when flashing mod I will add a way round it later this is a early stage mod
BUILD PROP DISPLAY TWEAKS
debug.hwui.render_dirty_regions=false
ro.hwui.text_cache_height=256
ro.hwui.fbo_cache_size=16384
ro.hwui.layer_cache_size=16384
ro.hwui.path_cache_size=16384
ro.hwui.round_rect_shape_cache_size=16384
ro.hwui.circle_shape_cache_size=16384
ro.hwui.rect_shape_cache_size=16384
ro.hwui.arc_shape_cache_size=16384
ro.hwui.oval_shape_cache_size=16384
ro.hwui.texture_cache_size=16384
ro.hwui.gradient_cache_size=16384
ro.hwui.text_drop_shadow_cache_size=16384
ro.hwui.font_renderer_cache_size=16384
ro.hwui.resource_cache_size=16384
ro.hwui.patch_cache_size=16384
ro.hwui.disable_vsync=false
ro.hwui.layer_size=1024
ro.hwui.render_layers_as_regions=1
ro.hwui.stencil_buffer_size=3.0
ro.hwui.texture_cache_flush_rate=0.9
ro.hwui.panel_bit_depth=32
ro.hwui.default_text_gamma=1.8
ro.hwui.default_text_black_gamma_threshold=255
ro.hwui.default_text_white_gamma_threshold=255
ro.hwui.disable_scissor_opt=true
debug.hwui.show_overdraw=false
debug.hwui.show_layers_updates=false
ro.hwui.text_gamma_correction=shader3
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
Just need people to check see if they notice improvements
Please note I had a user try on a Huawei Y300 and apparently broke audio but as I remember when I had the Y300 that phone had a good loud audio speaker and the phone it self hated most audio mods
DEVICES TESTED
P880 - 4.4.2, 4.3.2, 4.1.2 (Stock) Worked
Y300 - 4.4.2 Broke audio
Acer Liquid E2 - 4.2.1 Stock & custom versions Worked
Will test more
Please PM me if you have any requests to do with audio if its bass loudness etc...
OK will repack later sometime so you's can move files into right places etc... But at present no official time of when it will be as
SPECIAL THANKS TO
CM
LG
SONY
HTC
Adam77Root
Laufenstepenwolf
Demetris
Fluoxetine
Ectoplasma22
As if wasn't for these I wouldn't be able to test or get libs for the mods etc... And great work guys if I missed someone I will remember eventually
I will make a banner and will turn this mod in to the ultimate all in one mod
Sent from my LG-P880 using Tapatalk
Is this working also on stock roms?
Sent from www.callofgods.de | www.gloryofgods.com
CryptKilla said:
Is this working also on stock roms?
Sent from www.callofgods.de | www.gloryofgods.com
Click to expand...
Click to collapse
Should work on all phones and all ROMs even stock ROMs but need root and a recovery
Sent from my LG-P880 using Tapatalk
Is it possible to push files using root explorer ? If yes i would suggest taking files of all 3 mods and explain how to replace them.
Other than that good job this phone really needs that kind of stuff.
tuncay_93 said:
Is it possible to push files using root explorer ? If yes i would suggest taking files of all 3 mods and explain how to replace them.
Other than that good job this phone really needs that kind of stuff.
Click to expand...
Click to collapse
I'm sure it would be possible I will create 3 separate zips with everything you need and a read me txt file with instructions also will add more features etc...
Sent from my LG-P880 using Tapatalk
danny19901 said:
I'm sure it would be possible I will create 3 separate zips with everything you need and a read me txt file with instructions also will add more features etc...
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Or maybe Aroma Installer?
BTW Danny: In the log you took and @Fluoxetine sent me you use a wrong A2DP HAL, see:
dlopen failed: cannot locate symbol "__htclog_init_mask" referenced by "audio.a2dp.default.so"...
Click to expand...
Click to collapse
Adam77Root said:
Or maybe Aroma Installer?
BTW Danny: In the log you took and @Fluoxetine sent me you use a wrong A2DP HAL, see:
Click to expand...
Click to collapse
Oh OK and I will look into the error my new audio mods have fixed it completely revamped it all lot better audio more clear and more bass but not to much to cause distortion at all
Sent from my LG-P880 using Tapatalk
Is it OK ART mode?
I use Mokee 44.2 ART Mode..
I want to know This MOD support ART Mode..
Thanks
scweeny said:
I use Mokee 44.2 ART Mode..
I want to know This MOD support ART Mode..
Thanks
Click to expand...
Click to collapse
I'm not sure I haven't ever tried ART also my new version kept breaking my ROM so I'm gonna have to reupload old version as box overwritten the old one I'm gonna create 2 mods 1 for Display improvements 2nd for Audio Improvements
and yes it should work with ART
Sent from my LG-P880 using Tapatalk
I can't install this mod. It gives me error 6 in CWM. As far as I could understand, it probably has something to do with syntax in updater script since character encoding is native unix as far as I could see...
ivanhoe74 said:
I can't install this mod. It gives me error 6 in CWM. As far as I could understand, it probably has something to do with syntax in updater script since character encoding is native unix as far as I could see...
Click to expand...
Click to collapse
OK my bad sorry inconvenience anyway I got a new audio mod just testing and seems epic will upload later
Sent from my LG-P880 using Tapatalk
Are there news? What about the great all in one mod for gaming and battery life?
SniperInside said:
Are there news? What about the great all in one mod for gaming and battery life?
Click to expand...
Click to collapse
Still being worked on but when ready it should be pretty awesome no official release date of when ready ok a made a B1 version and tested performance wise though seems to have made phone a lot smoother but strangely dropped Benchmark from 17k to 14k with antutu also with many performance features added it seems any type of mod some reason drops benchmarks so if anyone wants I will put link up for beta
Sent from my LG-P880 using Tapatalk
ivanhoe74 said:
I can't install this mod. It gives me error 6 in CWM. As far as I could understand, it probably has something to do with syntax in updater script since character encoding is native unix as far as I could see...
Click to expand...
Click to collapse
Sorry for inconvenience the issue has now been fixed and new link is up also with a few new mods
Sent from my LG-P880 using Tapatalk
When I flashed AIO, I couldn't find any settings or anything, so can't say what exactly it does, but when I flashed audio mod, i got audio enhancement and the sound is really great:good:
ivanhoe74 said:
When I flashed AIO, I couldn't find any settings or anything, so can't say what exactly it does, but when I flashed audio mod, i got audio enhancement and the sound is really great:good:
Click to expand...
Click to collapse
No options and nothing to turn on as soon as flashed it will improve display quality and Audio I do recommend using Display Build Prop tweaks as well as it will improve anti aliasing in entire ROM
This Friday I should be getting a new tower as lately I have been using a low spec laptop and as I don't know spec of the tower I will be beefing it up if it's needed and then I can work on new projects as well as Poptart to deliver more performance but keeping it battery efficient
Sent from my LG-P880 using Tapatalk
Thanks for your work. What does the aio pack include? Also the walkman app optimized for kk? All the performance and bravia tweak?
SniperInside said:
Thanks for your work. What does the aio pack include? Also the walkman app optimized for kk? All the performance and bravia tweak?
Click to expand...
Click to collapse
AIO is bravia 3 - Xreality, Beats audio & Xloud
Walkman app is well Sony's music player with sound enhancements which I built up as I tried many on the P880 and well either they kept FC'S or broke audio but I got it to fully work as well as all the audio enhancement features
Poptart Mod is in Beta and eventually all the mods I posted Walkman Bravia 3 etc... Will be a complete mod and will do performance enhancements as well as audio, display and hopefully battery but as it's beta for now and packs quite a few performance enhancements but it seems to of dropped my benchmarks these tweaks are stuff from Fsync, loopy smoothness and a few other tweaks but it all still needs work
When I have time I will put proper explanation for each mod and try clean thread up a bit sorry for causing this much mess in the thread
sent from my P880 running Beanstalk with iodak 9.95 sent tapatalk pro
I tried the AIO, but no Audio on Blutooth...
Fladder72 said:
I tried the AIO, but no Audio on Blutooth...
Click to expand...
Click to collapse
Oh as I don't have any Bluetooth headsets etc... I can't test sorry about that
Sent from my LG-P880 using Tapatalk
Look this before you went down
1- This mod are the audio mod which ported from XZ to XTX MSM 8260T chipset.
2- FEEL FREE TO INCLUDE THE MOD TO YOUR ROM OR MODS WITH PROPER CREDITS GIVEN, OR I WILL FIND YOU OUT.ALSO I AM NOT TAKING ANY RESPONSIBILITY TO YOUR BREAKED PHONE OR HEADSET!!
3- This mod works fully on unlocked bootloader and locked bootloader , of course a custom recovery is needed, and a deodexed rom too
4- The speaker's audio quality becomes worse as you increase volume, this is because our speaker cannot output good audio quality at loud volumes.it is impossible to keep audio quality and loud volume because of our hardware.
The htc one(M8) has a dedicated amp inside it's chipset which amplifies audio better with more sound, that is why new htc phones can have very loud speaker volume with good speaker audio quality.(from zeroinfinity)
5- Please! For your own safety, do a Nandroid backup before install mod!If you got android updates every restart, deodex your rom
6- Lastly, enjoy my mod and give the feedback if you find ANY bugs
-If you sure you have readed all of these notes/attention, you may continue the thread
Click to expand...
Click to collapse
Keeps suffering on your device's speaker?feel not enough bass,clarity on your high class headphones etc.?Don't worried about this, presenting, the new SoNiCo PureXAudioTx (also named as PxATx) !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is the feature/pros of installing SoNiCo PxATx ?
>This mod are based on ZerInfinity's PureXAudio, many thanks to him
>Included the Htc One M8's 75% libs and mods
>DSEE-HX ported from the NWZ-F886 V1.1 firmware
>Special modded Walkman UltraZ and ProtoypeZ S.Enc with full transparency *
>BeatBass from HTC Rezound Included to the mod
>HTC Acoustic Engine included to provide Clear Acoustic sounds.
>Enabled MPQ8064 Audio Decoding
>32Bit Unsigned Integer Quantization
>256x SuperClock Frequency Audio Upsampling Quantization (12.2MHz)**
>Maximum speaker volume and provide good quality outputed.***
>Easy to install, good for newbies
>Every updates will write the details on the Changelog.
*: The Walkman UltraZ are splited as a own zip,it doesn't included in the mod pack.
**: the 12.2MHz overclocked sampling frequency are not included on stock vol patch
***: The speaker may appear breaked sounds at 14/15 volume set, the best speaker volume is at 10~12
Click to expand...
Click to collapse
~Downloads~
Please confirm that your rom is DEODEXED before you INSTALL the MOD!! . If done, click the shot content button to download
Project SoNiCo PureXAudioTx
****************BlasterZ SoNiCo*****************
V1 for Xperia Tx,T with JB installed
Click ME To Download
-------------Additional add-on links------------------
YKG presented Walkman UltraZ V81A0R2Z
Click ME To Download
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
PureXAudio Stock Volume Patch V3.0
Click MeTo Download
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Screenshots
Thread Editing....
Confirmed Bugs
Bugs from XperiaZ is not confirmed will happened on XTX or not.just give me the feedback when you met it
INSTALL GUIDE
*-*-*-*-*-*-*-*-*-*-*Started from V1-*-*-*-*-*-*-*-*-*-*-*-*-*-
>Download the latest zips and put it to your device storages
>Reboot into Recovery
>At recovery, Wipe cache partition and dalvik cache
>After the cache wiping is done, you can flash the zip now
>After the zip is flashed done. reboot your device and enjoy the new awesomes.
*-*-*-*-*-*-*-*-*-*-*Add on-*-*-*-*-*-*-*-*-*-*-*-*-*-
>Download the Add on and put it to your storage device
>Reboot to recovery
>Just flash it without wiping anything
>After flash is done, reboot your device and enjoy.
PS: The presets are based on my MH-EX300AP headset,So It may have some diff sound output on diff devices
New User Q&As
*Why you editing the whole thread with "HIDE" code?
~I do this because I want the newbies can remember more what they have installed, and how to install, and not install the mod without reading the whole thread and cause them get a lot of "BullS**it" problems
Changelogs
Code:
[size="3"]
Project SoNiCo:--
Nooby V1
>Initial release,features has being written at the OP,please read it carefully :)
[/size]
Like the mod?
If you like the mod that I have developed,Please consider buy ME a coke
[notesress ME to make a donation to me]
Donors
-emailpeter
Credits
~ZeroInfinity for giving me the Permission
~Taiwanese friend for helping me for testing the mod
~Me for advancing the mod
Notepad++
D4zipupdater
Sony, Rockbox&Asus
If you appreciate my work please buy me a coffee or coke to let energize me to continue the develop
hello great job. I can try to implement it in my Rom and publish it? thanks
theflanker said:
hello great job. I can try to implement it in my Rom and publish it? thanks
Click to expand...
Click to collapse
Yes you can include the mod to your rom with the proper credits given
Would it work on omni ?
Pls port for Xperia Sp
Tapatalk-kal küldve az én C5303-el
zy4377340 said:
Would it work on omni ?
Click to expand...
Click to collapse
Not sure but you can give a try on it
jancsessz said:
Pls port for Xperia Sp
Tapatalk-kal küldve az én C5303-el
Click to expand...
Click to collapse
I am porting the mod to SP now... maybe 2 months or more
Does this work on xt or is it just for xtx.
bruce1x said:
Does this work on xt or is it just for xtx.
Click to expand...
Click to collapse
See the title mate, it support xt and xtx both of them
Sent from my C6603 using Tapatalk
Does It work With my phone ?
jimRnor said:
See the title mate, it support xt and xtx both of them
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Have to install add on or just need to install main mod?
Denver3D said:
Does It work With my phone ?
Click to expand...
Click to collapse
Look on the title pls, it work on t and tx only
Oohhlala said:
Have to install add on or just need to install main mod?
Click to expand...
Click to collapse
Just install the main mod and it will be done, add on pack is just the support
Sent from my C6603 using Tapatalk
Yes there is an improvement on sound quality, but at the expence of ram and battery drain. mine dropped 25% in half an hour.
Why you need 2 months to port it on SP?
bruce1x said:
Yes there is an improvement on sound quality, but at the expence of ram and battery drain. mine dropped 25% in half an hour.
Click to expand...
Click to collapse
Basically this mod wont effect too much battery usage, try reflash your rom without wiping data then reflash this mod.
AirBlaster96 said:
Why you need 2 months to port it on SP?
Click to expand...
Click to collapse
I got 4 steps to port and dev a mod to a device
1)porting process,gathering the mod to include and write the script
2)when complete the test zip, I gotta upload it to the facebook to let my tester to test it (the most time uses
3)when complete the test,I have to rewrite updater-script and test it again to ensure no updater-script error or else
4)I will use about 6 hours to create and edit the thread
this is the basic step that how I dev a mod,I will need 2 months to port to SP because it still have different chipset with XTX
jimRnor said:
I got 4 steps to port and dev a mod to a device
1)porting process,gathering the mod to include and write the script
2)when complete the test zip, I gotta upload it to the facebook to let my tester to test it (the most time uses
3)when complete the test,I have to rewrite updater-script and test it again to ensure no updater-script error or else
4)I will use about 6 hours to create and edit the thread
this is the basic step that how I dev a mod,I will need 2 months to port to SP because it still have different chipset with XTX
Click to expand...
Click to collapse
Haha okay then, Btw i write you couple of times in xperia z thread and when i flash mod there is no bootloop only problem is that it doesn't flash everything so after that i flash everything manually once again and it work without problem (at least i think so),just a tip for you im trying be helpfull and will you Keep it updated with the last version of xperiaz all the time?
AirBlaster96 said:
Haha okay then, Btw i write you couple of times in xperia z thread and when i flash mod there is no bootloop only problem is that it doesn't flash everything so after that i flash everything manually once again and it work without problem (at least i think so),just a tip for you im trying be helpfull and will you Keep it updated with the last version of xperiaz all the time?
Click to expand...
Click to collapse
Ok I will remember your tips
Yes I will keep the update of XZ, but before that, I gotta let my mod work on z1 first since the System are huge different...
So did you mean that the XZ version works on XSP too?
jimRnor said:
Ok I will remember your tips
Yes I will keep the update of XZ, but before that, I gotta let my mod work on z1 first since the System are huge different...
So did you mean that the XZ version works on XSP too?
Click to expand...
Click to collapse
Yes it work perfectly, well i don't know if everything is like in xperia z (i mean sound) but there is no crashes, no bootloops
AirBlaster96 said:
Yes it work perfectly, well i don't know if everything is like in xperia z (i mean sound) but there is no crashes, no bootloops
Click to expand...
Click to collapse
and that will be easy to port it to the SP
thanks for your information, I will try to rewrite the updater-script and test it, would you like to be my SP tester?Of course proper credits will have for you
jimRnor said:
and that will be easy to port it to the SP
thanks for your information, I will try to rewrite the updater-script and test it, would you like to be my SP tester?Of course proper credits will have for you
Click to expand...
Click to collapse
Yeah i would love to be tester haha thank you for that
Hello, I installed yor port today on .205, deodexed with doomkernel v10(default sound option on the kernel). And both my primery and secondary mics dont work, service menu crashes after trying to test them, apart from that there is too much treble and in poweramp i can use musicFX(sound enchantment by sony) otherwise gj porting it, but the mic thig, please try to fix it asap Oh and there is no in call audio trough the headphones
Lolli-POP Sound MOD v6.1
FOR BOTH LOCKED or UNLOCKED BOOTLOADERS
(Works with Z2, Z3 + Z3 Compact Running STOCK Sony Lollipop 5.1.1 FWs)
DISCLAIMER:
I will not accept responsibility for any damage caused to your device, ears, eyes or any other occurrence as a result of flashing this MOD.
YOU FLASH THIS AT YOUR OWN RISK!
Now that's out of the way..
Requirements BEFORE flashing:
-Recovery Installed
Find one here by NUT: http://nut.xperia-files.com
-Already rooted on any of the stock sony lollipop firmwares released so far
(will work best on a fresh install - with no other sound mods)
-A pair of working ears / good hearing
-A finger to tap the screen with
Features:
-Clearer sound throughout the system
-Dual Loudspeaker during calls
-Improvements to built in speakers, headphones & bluetooth sound clarity
-Sony XLoud - now boosted to pack more of a punch
-Sony Clearphase effects
-Dolby ATMOS
-ALL BASED ON STOCK FW FILES
Instructions:
1. Ensure you are on Lollipop 5.1.1 firmware (and rooted)
2. Make a CWM BACKUP
3. Flash the .zip in recovery - v6 first, then v6.1 for best results
4. Wipe cache & dalvik/ART cache
5. Reboot
6. Enjoy!
7. Click the THANKS button
DOWNLOAD LINK FOR v6 + v6.1 IN ATTACHMENT BELOW
FLASH V6 FIRST, THEN FLASH V6.1 TO AVOID ANY ISSUES
PREVIOUS VERSIONS:
v5 no longer has xloud, clearphase switches, it is all enabled at once, this is to provide compatibility for .62 firmwares and to stop the video skipping issues and storage problems people were having
(There are no options for xloud, clearphase etc for .62 yet)
https://mega.co.nz/#!PYZDCJKI!Z2aICORb0W0YfLKjaeSrqAGElyCZOc8V_j2fOfhQ8-0
/\ /\ download for v5 *LIGHT VERSION* (more compatibility, no xloud, clearphase settings) (.62 compatible) on mega.co.nz link /\ /\
https://mega.co.nz/#!WVAhHa7A!X7Cao3BH82dadpt6aqPtg_tuBRnu0iJqi7HYYzxJhDE
/\ /\ download for v4.1 (.62 compatible) on mega.co.nz link /\ /\
https://mega.co.nz/#!WNwlgbAb!ynatv7CBNbNoL8efBeSDyjMB3KpmvbdxO6QM6pBRfuk
/\ /\ download for v4.1 on mega.co.nz link /\ /\
https://mega.co.nz/#!zNIhnIAD!TGsAaACmdfXzl3EboMLOR5lozey3t5nIwRu2Ew0PvN8
/\ /\ download for v4 on mega.co.nz link /\ /\
https://mega.co.nz/#!SV5xzJRK!koaqHO67dMZ0Fu7whyO2CljMWjmfuD36GJe1jKa9NFE
/\ /\ download for v3 on mega.co.nz link /\ /\
This is now the final update for this MOD - it is now complete and will not be updated any further (unless for Android M when/if released)
Thanks bro for the great work..Everything is just working great
Almost got deaf by that boom patch
Looking fine, maybe I'll give it a go when I have time.
Could we get any screenshots?
Are the speakers any louder when playing music?
Thanks!
i am coming from another sound mod and after flashing your mod it seems like there was no difference for me at all. Even changing the equalizer doesn't do a thing to the audio.
Any idea on how to make your mod work?
RedDevils88 said:
i am coming from another sound mod and after flashing your mod it seems like there was no difference for me at all. Even changing the equalizer doesn't do a thing to the audio.
Any idea on how to make your mod work?
Click to expand...
Click to collapse
This will not be compatible with any other sound mods.. if you had any installed before flashing this then I would not expect it to work..
You are best off flashing this on a clean stock install.
Thanks for the mod but I got this "error"...how can I uninstall it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fedee13 said:
Thanks for the mod but I got this "error"...how can I uninstall it?
Click to expand...
Click to collapse
+1. I can confirm that I've got this error as well on eXistenZ Y 1.0.0.
Thanks
spuri78 said:
+1. I can confirm that I've got this error as well.
Thanks
Click to expand...
Click to collapse
same happen with me, tried it twice but same result also touchpal keyboard is not working after flashing this on my z2
fedee13 said:
Thanks for the mod but I got this "error"...how can I uninstall it?
Click to expand...
Click to collapse
Probably by re-flashing the rom you are currently on. I'm going to re-flash existenz Y
spuri78 said:
Probably by re-flashing the rom you are currently on. I'm going to re-flash existenz Y
Click to expand...
Click to collapse
Same here...
Will all my apps be gone? Damn...
Oh, I forgot... I made a CWM backup Doh.
This mod is a no-go for the eXistenZ Y 1.0.0 ROM
Oh well, Can't blaim the mod since it's a mod for the STOCK lolipop ROM.
Raxeller said:
Same here...
Will all my apps be gone? Damn...
Oh, I forgot... I made a CWM backup Doh.
This mod is a no-go for the eXistenZ Y 1.0.0 ROM
Oh well, Can't blaim the mod since it's a mod for the STOCK lolipop ROM.
Click to expand...
Click to collapse
Exactly, this is for STOCK rom only guys..
pricey2009 said:
Exactly, this is for STOCK rom only guys..
Click to expand...
Click to collapse
OK! How can I delete it?
Just request... Can you mod for existenz to... Thanks...
Thanks for this mod.
I have installed it this afternoon and all seems to work great, no errors have occurred.
Call sound is a lot better
Speaker volume is louder and fuller.
The headphones sound "more filtered" and very different than before, I'm playing around with equaliser settings but I find it hard to get a clear and balanced sound.
Could you please explain more about the boomsound integration ?
I don't see any settings or other trace of what it does?
Did not get any errors yet.
But i am not really pleased with the audio quality. Before I used the eq by shuffle player (which sounds really natural and balanced). Now I cannot use it anymore because there's a lot of crisps. Can't add really bass to it.
With the Sony-eq it sounds a bit better bit still really crispy.
fedee13 said:
OK! How can I delete it?
Click to expand...
Click to collapse
just reflash ROM you use without wipes.
does anyone know which values from the mixer_paths.xml deals with the external volume speakers (when playing music, ringtone, speaker phone, etc) because I want to lower those values manually. the reason is that I have one defective speaker and it makes strange noises when I take the volume over ~60%ish.
I already tried to lower some values, but apparently I can't see any differences.
@pricey2009 your help would be much appreciated :d
fedee13 said:
OK! How can I delete it?
Click to expand...
Click to collapse
You will need to restore your CWM backup..
jok3r4u said:
does anyone know which values from the mixer_paths.xml deals with the external volume speakers (when playing music, ringtone, speaker phone, etc) because I want to lower those values manually. the reason is that I have one defective speaker and it makes strange noises when I take the volume over ~60%ish.
I already tried to lower some values, but apparently I can't see any differences.
@pricey2009 your help would be much appreciated :d
Click to expand...
Click to collapse
Try the attached zip below, this will set the volumes to default for you
@pricey2009 I don't want to set them to defaults, I want to lower those values even more
Update to v3
Now updated to V3 + Boom Mode v2
Added some new bits including extra in-call clarity
Have cleaned up the mod overall and I have tried to eliminate any problems with storage showing low, skippy videos etc that people were having
Please test and provide feedback..
Enjoy
Here is the Desire
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have big support from you, thanks to you so much
And now, I will present you: Project Desire
Functions:
Support Project Sonico from jimRnor (Thanks JimRnor)
DSEE-HX, yes it works really on ZU (Only for Xperia ZU, Z1-Z3)
Hardest DSEE-HX upscaling (6144kHz 64bit)
MaxxAudio
Qualcomm HW Effect
BeatsAudio
BoomSound
Harman Kardon
Dirac
Dolby Atmos Intelligent EQ and Sound Virtualizer
XLoud Libary Effect
Boosting Speaker
Ultra High Sampling (6144-49125kHz 64bit)
SRS
HTC Acoustic
Acoustic
ASound (2822.4kHz 64bit)
Clearaudio EQ
z4 files
Forcing 24-64bit playback
Click to expand...
Click to collapse
Install Instructions :
Download Zip
Extract the Project Desire Zip and then flash the extracted Zips
Wipe Cache
Wipe Dalvik Cache (Only on Z3)
Reboot to system
Warning!!! You must choose between DSEE-HX and Dolby
When you choose Dolby Atmos:
Flash the Dolby Zip file from Project Desir, reboot into system and Disable Sound Enchantment
Click to expand...
Click to collapse
For the Moderators: this Soundmod is not only for Z Ultra and Z1,Z2 and Z3 , many devices like Xperia M comes a little bit later
This uploaded file works only for Stock Lollipop on Z2 and Z3
Thanks to all people who supported me Thanks to my Girlfriend, thank you so much
@jimRnor thank you for inspiring me
Credits: http://forum.xda-developers.com/showpost.php?p=61218926&postcount=92
Download link: http://forum.xda-developers.com/cro...dmod-project-desire-feel-dream-sound-t3130504
the-cortana-project said:
Here is the Desire
I have big support from you, thanks to you so much
And now, I will present you: Project Desire
For the Moderators: this Soundmod is not only for Z Ultra and Z1,Z2 and Z3 , many devices like Xperia M comes a little bit later
This uploaded file works only for Stock Lollipop on Z2 and Z3
Thanks to all people who supported me Thanks to my Girlfriend, thank you so much
@jimRnor thank you for inspiring me
Credits: http://forum.xda-developers.com/showpost.php?p=61218926&postcount=92
Download link: http://forum.xda-developers.com/cro...dmod-project-desire-feel-dream-sound-t3130504
Click to expand...
Click to collapse
does it work on z2 moonwalker rom v3 ?or it hasnt been tested yet ?
this mod can works on Existenz Y 1.5.0?
sh4d1t0 said:
this mod can works on Existenz Y 1.5.0?
Click to expand...
Click to collapse
Hi,
Yes, I am current using it on eXistenZ- Y 1.5.0.
Unzip and flash files inside. Dolby zip only if you want to... optional.
@soka said:
Hi,
Yes, I am current using it on eXistenZ- Y 1.5.0.
Unzip and flash files inside. Dolby zip only if you want to... optional.
Click to expand...
Click to collapse
If you flash the Dolby, you can't use the Sony sound features, right? I remember flashing a dolby mod before but when changing EQ settings and headphone type, it doesn't work anymore.
right!.. I have one question, how do you remove dolby atmos?
sh4d1t0 said:
right!.. I have one question, how do you remove dolby atmos?
Click to expand...
Click to collapse
Disable on Settings app/Apps/All the Both Dolby Apps and then reboot
iArvee said:
If you flash the Dolby, you can't use the Sony sound features, right? I remember flashing a dolby mod before but when changing EQ settings and headphone type, it doesn't work anymore.
Click to expand...
Click to collapse
Same applies, here. At times i found myself having to clear the data on the Audio settings apps for the Dolby mod to kick in.
Other than that , this mod has excellent clarity at high volumes. :good:
@soka said:
Same applies, here. At times i found myself having to clear the data on the Audio settings apps for the Dolby mod to kick in.
Other than that , this mod has excellent clarity at high volumes. :good:
Click to expand...
Click to collapse
Indeed it does! It'd be much, much better if you didn't have to keep clearing the data for Audio settings in order for Dolby to work though. :/
Thank you very much.. It works.. this is amazing .. sound is perfect with my noice cancel headset.. on my xperia Z2.. thanks again.. you guys are perfect and amazing.. keep up..
Smashes it on my Z2!!! Big up Dev!!!
Not working on z2 moon walker rom v3 ..every reboot i got no storage in system message
Hi
I can't flash this mod on my Z2 on Existenz Y 1.5.0. All the time when I boot into recovery (PhilZ and TWRP) and try to flash zip, recovery shows error flashing, aborted. I have locked bootloader. What am I doing wrong?
works well with Stock 5.02 Z2
Best soundmod ever!!! For my z2
Nice work !!!
This soundmod is so nice this must be a standard on every z2
Finally im getting what ive paid for
After owning various galaxy s Models waisting my time finding good Xperia walkman mods to flash
I decided it was time for a New experience called the z2. ..
After saving my hard earnd money an some research
There it was in my hand so i grabbed my headphones
Plugged it in pressed up the volume to the max and still i hear the b tch nagging
So the search for soundmods continued until today.......
Thanks for that
YOURE THE MAN
Bruce666 said:
Hi
I can't flash this mod on my Z2 on Existenz Y 1.5.0. All the time when I boot into recovery (PhilZ and TWRP) and try to flash zip, recovery shows error flashing, aborted. I have locked bootloader. What am I doing wrong?
Click to expand...
Click to collapse
Your download must be corrupted, download again and try.. Be sure to wipe caches before and after..
tOrNadO™ said:
Your download must be corrupted, download again and try.. Be sure to wipe caches before and after..
Click to expand...
Click to collapse
yes, bad download. Installed Dolby and turned off Sound Enhancement. Are all these mods enabled or do I have to enable them somewhere?
Latest OTA update seems to have made the headphone volume lower. Can anyone else confirm this?
iArvee said:
Latest OTA update seems to have made the headphone volume lower. Can anyone else confirm this?
Click to expand...
Click to collapse
I know, must fix that
FM radio volume is very loud . can u make the Music player volume as FM radio ??
Hey guys!! so earlier I have come up with Dolby Atmos mod for Samsung Nougat devices, but it still bugged me that Viper4Android was not working!! So after countless hours of brainstorming, I finally got viper4android to work on Nougat!!
So here you go!! Also works with my Dolby Atmos!
Tested devices:
- S6 edge+
- Note 5
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
- Samsung device
- Nougat rom (N-lite V3 rom users, please wait for V4 rom. Pre-installed busybox on V3 interferes with viper driver installation)
- Rooted by Magisk (Dolby does not need root. Only viper needs root by magisk)
Installation instructions:
- Flash attached viper zip file and UPDATE zip file in TWRP. Users already using this mod, please see update instructions below.
- Reboot
- Install Busybox by Meefik here - https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=en
- Open Viper4android app and install drivers if it prompts.
- Enjoy!! Flash DolbyAtmos zip if you want
Update instructions:
- Uninstall Viper4android drivers from the menu in Viper4android app.
- Flash the update zip.
DolbyAtmos thread here: https://forum.xda-developers.com/s6-edge-plus/development/audio-mod-dolbyatmos-t3553494
Download Mirror:
MEGA - Main zip
MEGA - Update zip
Thanks and Credits:
- @CaptainTiiti for the countless hours of support and guidance and motivation, without him, this project would have never made it here
- @topjohnwu for the magisk stuff
- The developers behind Viper4Android
- @worstenbrood for the original dolby atmos mod
- @gtaelbordo for the kindness and support, and for the icons of DolbyAtmos
Hope you like it. Leave a Thanks if you do.
Also join me on telegram chat at https://t.me/su_community
See you soon!
Reserved. Viper4android profiles coming soon here.
Reserved 2
works thanks
Thanks for your mod. Does it work with adapt sound?
Ringo1989 said:
Thanks for your mod. Does it work with adapt sound?
Click to expand...
Click to collapse
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
CrsMthw said:
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
Click to expand...
Click to collapse
after testing .. dont work ..after rom Update. which rom do u use?
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after testing .. dont work
Click to expand...
Click to collapse
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
CrsMthw said:
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
Click to expand...
Click to collapse
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
so it works until a reboot... after reboot i got the same meessage ... i read it on another thread.. i know the problem but i dont have the knowledge to change it)
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
CrsMthw said:
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
Click to expand...
Click to collapse
okay thanks
gtaelbordo said:
okay thanks
Click to expand...
Click to collapse
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
CrsMthw said:
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
Click to expand...
Click to collapse
okay good to know thanks
Remote service stopped everytime I press back button until open Dolby apps
Sent from my Redmi 3X using Tapatalk
jmmigo said:
Remote service stopped everytime I press back button until open Dolby apps
Click to expand...
Click to collapse
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Hi, thanks for the good work, works perfectly on my rom with Dolby
IZI.Xav said:
Hi, thanks for the good work, works perfectly on my rom with Dolby
Click to expand...
Click to collapse
You are welcome!! Feel free to add both audio mods into your amazing rom if you want, with credits
CrsMthw said:
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Click to expand...
Click to collapse
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
jmmigo said:
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
Click to expand...
Click to collapse
Oh that's weird..