Hi,
So I flashed CM12 to my phone - the most recent nightly. All was good except it wasn't recognizing the SIM. So I asked in reddit and was told it was a new issue and to flash back to the 18th. My computer no longer recognizes my phone being plugged into it via USB, so I just directly downloaded it, booted into recovery, and flashed the version from the 18th.
Now my phone is stuck on an endless boot animation of the little blue alien and won't boot up. Any next steps would be greatly appreciated!
Thanks.
Can you get into download mode?
Volume down, home, and power.
---------- Post added at 04:47 AM ---------- Previous post was at 04:46 AM ----------
Or recovery?
Volume up, home, and power?
Related
I am sorry if someone else had posted this but i can't seem to find it . I have the Sprint HTC one M8 non H/K version.. It is rooted unlocked with TWRP 2.7.0.7 S-Off i have the Bad Boys version 1.4 ROM with the H/K firmware.. My problem is that I switched from Dalvik to ART in the Developer options and it prompted me to reboot the phone, when i did the phone wont reboot . It is stuck on the HTC One logo screen right before it starts up. I have tried to VOL+ power and it goes to the update HBOOT then asks to reboot phone and still wont boot. can someone please point me in the right direction. Thank you in advance
I had to delete the P0BIMG.zip file from my sd card to keep it from updating my HBOOT , then i was able to reboot into recovery and install backup.
Last time I tried ART, the first boot took a LONG time
redskykiter said:
Last time I tried ART, the first boot took a LONG time
Click to expand...
Click to collapse
I have let it sit for over 20 minutes.
stark1159 said:
I have let it sit for over 20 minutes.
Click to expand...
Click to collapse
It didn't take that long....press and hold power and volume up to get out of it
edit: sorry didn't see that you tried this
---------- Post added at 03:23 PM ---------- Previous post was at 03:18 PM ----------
what about holding volume down during reboot to get back to recovery?
redskykiter said:
It didn't take that long....press and hold power and volume up to get out of it
edit: sorry didn't see that you tried this
---------- Post added at 03:23 PM ---------- Previous post was at 03:18 PM ----------
what about holding volume down during reboot to get back to recovery?
Click to expand...
Click to collapse
yep tried that too and a no go.
stark1159 said:
yep tried that too and a no go.
Click to expand...
Click to collapse
It just keeps updating my HBOOT and then saying press power to reboot . I do that while holding the vol - and it just repeats the update HBOOT
nm sorry
v1.4 is not currently ART compatible, but will be soon
Hello.
Cant get any help anywhere, hope here someone will help me.
I have LG G2 VS980 32Gb version. I have rooted it myself, I installed on it TWRP bootloader and xdabbeb_vs980_3.1.2 ROM and everything worked perfect.
But I wanted to install CM12, when I was doing that TWRP "told" me something like "your device is not rooted, do you want to root the device" with yes button. I thought "why not?" and pushed the button.
After that phone has no reaction on any combination of buttons, but Windows 8.1 see my phone as qhsusb_bulk.
P.S. I cant get it to download mode.
can someone help me?
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
biggiesmalls657 said:
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
Click to expand...
Click to collapse
as i said, phone has no reaction on any combination of button press. :crying:
i used XDABBEB v3.1.2 ROM, don't know what kernel it has.
and sadly i don't remember what radio i used.
but i remember "xdabbeb vs98039a" bootstack version.
Did u plug it in?
biggiesmalls657 said:
Did u plug it in?
Click to expand...
Click to collapse
pluged it with ac charger it did not charge.
pluged it in PC with Windows 8.1, sees it as qhsusb_bulk
pluged it in PC with Slax Linux 7.0.8, it did not see it.
pluged it in PC with CentOS 7, it did not see it.
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
biggiesmalls657 said:
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
Click to expand...
Click to collapse
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
FENIX-REX said:
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
Click to expand...
Click to collapse
You have to make sure you are using a fastboot cable
Edit: TWRP is a custom recovery not a bootloader. 39a bootstack is required lollipop for the LG G2 verizon VS980 model. Have you try flashing stock. If you bumped twrp to your device then you should be able to access it. If the device is fully dead find a fastboot cable just so it will show the LG logo and that point you can load twrp. You cant revive a dead device or can I? Lol also your selinux must be set to permissive or your device will not boot. TWRP doesnt require root to flash roms and make backups. If you have a sign of any life your device is not bricked. I have bricked many devices and i have found a way back. Just stay positive If you need more help post screenshots of your cable and use a wall charger not usb!!!!
---------- Post added at 10:20 PM ---------- Previous post was at 10:06 PM ----------
Windows is the only way to fix it if im not wrong?
Just Now I used reboot to recovery from gravity box advanced reboot menu.
My phone Shut down and not booting up since.
I can connect to PC in fastboot and flash mode but can't get to boot it up.
I tried reboot command in fastboot it gives this output : red led comes and suddenly changes into green and then led goes off then again green led comes and stays on as long as my device is connected to my pc.
Please help guys i'm out of town and have no other phone with me now.
Edit : When I use the power button it just vibrates a little and that's it.
Dont Mess with phone when Out of your town.
Lol.
---------- Post added at 05:27 AM ---------- Previous post was at 05:24 AM ----------
https://github.com/rovo89/Xposed/issues/152
CHECH THIS
njaya95 said:
Just Now I used reboot to recovery from gravity box advanced reboot menu.
My phone Shut down and not booting up since.
I can connect to PC in fastboot and flash mode but can't get to boot it up.
I tried reboot command in fastboot it gives this output : red led comes and suddenly changes into green and then led goes off then again green led comes and stays on as long as my device is connected to my pc.
Please help guys i'm out of town and have no other phone with me now.
Edit : When I use the power button it just vibrates a little and that's it.
Click to expand...
Click to collapse
Only option is that you need to flash the phone using Flashtool. I faced it while accidentally switched on "MyExperia" after BL unlock.
After Flashing firmware using Flash tool it switched on. :good:
[email protected] said:
Only option is that you need to flash the phone using Flashtool. I faced it while accidentally switched on "MyExperia" after BL unlock.
After Flashing firmware using Flash tool it switched on. :good:
Click to expand...
Click to collapse
Thanks boss nenu adhe cheyyali ani anukuntunna.
arokososoo said:
Lol.
---------- Post added at 05:27 AM ---------- Previous post was at 05:24 AM ----------
https://github.com/rovo89/Xposed/issues/152
CHECH THIS
Click to expand...
Click to collapse
Hey!!! I did nothing. Just a reboot to recovery.
But Thanks.
I think i'm just gonna flash it again using flash tool. When i return home. But still no phone for 2 days ;-(
Hi,
I successfully unlocked the bootloader of the P9.
When I restarted my phone, it is now stuck on a screen which says;
"Your device has been unlocked and can't be trusted."
Your device is booting now.
I can't get the phone to turn off, or to go into fastboot or recovery. When I press the power button it simply takes me back to this screen. My computer also doesn't recognize it in this state.
Any help please
Flash stock in dl mode....both volume and power....
If you have Facebook than call me on massenger
M.facebook.com/rakhib.mistry
---------- Post added at 02:19 AM ---------- Previous post was at 02:19 AM ----------
I will tell you how to solve this
Cant get into downlod mode of recovery. It just loops back to this screen (see attached) have tried it being attached to PC etc..any ideas??????
Maybe try (Emergency) Recovery mode in Smartswitch PC App?
dezborders said:
Maybe try (Emergency) Recovery mode in Smartswitch PC App?
Click to expand...
Click to collapse
No luck with Recovery mode in SmartSwitch PC app, it says "smart switch does not support initializing, please contact service center"
Tried to flash magisk tar file via odin after enable oem unlock in developer options. However, at the end of flash device shows boot-loader locked and device always boot to screen showing " An error has occurred while update the device software. User Emergency recovery function in the smart Switch PC software"
Mode: S10 5G SM-G977B
AOSV: Android 10. DTM-G977BXXU2BSL2
Any input how to enter into download mode?
Kozmike, wait until the phone battery dies, charge to 40% and boot into download mode. Flash the original firmware for your Model.
@zeroktal, The device never boots directly into Download mode, FYI on S10-5G (SM-G977B) the download mode standard key combo(Vol-Down+Bixy+Power) is disabled and the only way to enter into download mode is to first boot into recovery mode and select menu option boot into boot-loader.
Did you wait for the battery to die? Also you CAN boot directly into download mode. I know this because, I literally just did it 10 minutes ago. This exact process, dead battery and all.
Heyya guys, I've personally could always boot directly into download mode full battery or not. Regardless if you manage to boot to download mode, flash stick non edited firmware first to see if you make progress, the bootloader being locked is a little scary but I'm 50% sure you can flash stock firmware still. Also you've stated you can get into recovery, is this stick recovery menu or twrp?. If twrp format cache, if stock have you tried a normal format?
zeroktal said:
Did you wait for the battery to die? Also you CAN boot directly into download mode. I know this because, I literally just did it 10 minutes ago. This exact process, dead battery and all.
Click to expand...
Click to collapse
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
MarshiMello said:
Heyya guys, I've personally could always boot directly into download mode full battery or not. Regardless if you manage to boot to download mode, flash stick non edited firmware first to see if you make progress, the bootloader being locked is a little scary but I'm 50% sure you can flash stock firmware still. Also you've stated you can get into recovery, is this stick recovery menu or twrp?. If twrp format cache, if stock have you tried a normal format?
Click to expand...
Click to collapse
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
kozmike said:
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
Click to expand...
Click to collapse
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
kozmike said:
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
Click to expand...
Click to collapse
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it ?
MarshiMello said:
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it
Click to expand...
Click to collapse
Thanks for the infos MarshiMello, I will let you know once I back to work. To boot into download mode I always tried to press Vol-DN+Bixy+Power. will try the new approach as suggested in the link by you..
MarshiMello said:
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it
Click to expand...
Click to collapse
Thanks for the link Marshimello. I revive my S10.
kozmike said:
Thanks for the link Marshimello. I revive my S10.
Click to expand...
Click to collapse
No worries mate, enjoy your working phone ?
MarshiMello said:
No worries mate, enjoy your working phone
Click to expand...
Click to collapse
kozmike said:
Thanks for the link Marshimello. I revive my S10.
Click to expand...
Click to collapse
Good job guys, i'm happy to see you guys helped each other and it was awaken from the dead! :good:
Hi XDA community.
I have the same issue as CP-93. I own a SK Telecom Galaxy S10 5G SM-G977N.
I tried yesterday to flash a custom rom, so first I flashed the TWRP recovery using Odin, then I was stuck after flashing the recovery in a bootloop with the same screen as CP-93 attached in this thread, with no access to recovery mode nor download mode, it just keeps rebooting until the battery dies I guess.
Can someone please explain to me how can I access again the download mode so I can reflash the stock rom?
Thanks in advance for the amazing support of this community.
Best regards.
I have the same problem ... how is he?