this is working for the Verizon Edge and just making sure all you folks saw this and and i have nothing to do with this except spreading the word.
here is the link
trailblazer101 said:
Cocktail AutoOn For Galaxy S6 Edge
Hey guys, just finished my latest mod -- Cocktail AutoOn! What this does is turns on the CocktailBar (the screen that is shown when you do the back and forth touch motion on the edge while the screen is off) when you receive a notification, of whatever app you select. It first shows the "Clock Feed" for a few seconds, then it moves to the Notification Feed, which will tell you about the received notification.
PLEASE READ!
---First please flash this with FlashFire, if you don't know how to do that please follow the steps here to get it set up: XDA Thread Link.
---You MUST open the app that will be installed, Cocktail AutoOn, allow Root Access, then Click the 'Click Me' button and enable the app in the screen that follows. You should also go into Settings, and enable some apps you'd like the CocktailBar to turn on for!
Willing to Test?
If your phone isn't in the supported devices list, and are willing to participate in this beta, please send me your services.jar file found in system/framework. If you aren't deodexed, please also include /system/framework/arm (AND arm64)/services.odex. You can either pull it yourself, or get it from a ROM you trust. I would prefer the latter, so I wouldn't have to deodex it myself (as long as it's a deodexed ROM)!
Updates
Code:
5/27
-Uploaded ATT And 925F/I Version(s), please test and let me know how it works!
5/26 v1.2
-Reupload (For Verizon 925V-OC3 only for now!)
5/24 - v1.1
-Release.
Features
Turns on the CocktailBar from a notification for whatever app you set!
Shows the time, initially, then automatically moves to the Notification Feed, for easy reading of the incoming notification!
Bugs
Not a bug, but this will wipe the dalvik-cache, so the following boot will be a little longer while it 'upgrades'. No data will be lost.
Make sure you have the Notification Feed enabled, which it should be by default...
Supported Devices/ROMs
925I/F - OE2/OE3 (Tested on some builds, please tell me which one you're running. Confirmed working on OE3)
925A - LATEST (OE2)? (Untested)
925V - OC3 (Confirmed working)
Downloads
v1.2 ( No Donation [Limited to one app, which is what most people only need it for, anyways--messaging] ):
925V (OC3)- View attachment 3333409
925A (??? [I believe OE2] ) - View attachment 3334455
925I/F (OE3) - View attachment 3334586
925I/F (OE2) - View attachment 3334608
If you like it and it works well for you, consider donating!
--That'll get you the ability to enable it for as many apps you want. Otherwise you could also send me a PM for the full version, along with a reason why you can't.
XDA:DevDB Information
Cocktail AutoOn Mod For Galaxy S6 Edge, Device Specific App for the Samsung Galaxy S6 Edge
Contributors
trailblazer101
Version Information
Status: Testing
Current Beta Version: 1.1
Beta Release Date: 2015-05-24
Created 2015-05-24
Last Updated 2015-05-24
Click to expand...
Click to collapse
Which one did you download?
Sent from my SM-G925V using XDA Free mobile app
MattCropley said:
Which one did you download?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
i am just about to set up again with a ROM so i havent yet but there is a version for 925V (OC3) which is our phone. i will do it tomorrow after i get new rom setup
I've flashed and i'm not sire working. I can't find the option to turn off the screen coming on with each notification.
---------- Post added at 08:47 PM ---------- Previous post was at 08:37 PM ----------
Yeah. I tried different messaging app and it didn't work
brackett5 said:
I've flashed and i'm not sire working. I can't find the option to turn off the screen coming on with each notification.
---------- Post added at 08:47 PM ---------- Previous post was at 08:37 PM ----------
Yeah. I tried different messaging app and it didn't work
Click to expand...
Click to collapse
It's definitely working on our phones, did you make sure to read everything on the OP? Specifically making sure the app has root access, that it's enabled in notification access (hit 'click me') and that you selected the app in my 'settings' screen?
For those using the stock messaging app, check my updated OP, I describe what you can do to get it to work. The issue is that the stock messaging app turns on the screen when it gets a notification, effectively rendering what I'm trying to do useless.
Also we have the 925V so download that one
I stand corrected, good sir. I missed the step about going into the actual app. I apologize. It's working fine.
trailblazer101 said:
It's definitely working on our phones, did you make sure to read everything on the OP? Specifically making sure the app has root access, that it's enabled in notification access (hit 'click me') and that you selected the app in my 'settings' screen?
For those using the stock messaging app, check my updated OP, I describe what you can do to get it to work. The issue is that the stock messaging app turns on the screen when it gets a notification, effectively rendering what I'm trying to do useless.
Also we have the 925V so download that one
Click to expand...
Click to collapse
so of i understand correctly, in order to get the edge on screen all the time (lets say in the launcher) we need the source?
have you tried porting some of the exge functionality from the note edge?
i dont donate much but that is something id for sure donate to!
Sent from my SM-G925V using XDA Free mobile app
elliwigy said:
so of i understand correctly, in order to get the edge on screen all the time (lets say in the launcher) we need the source?
have you tried porting some of the exge functionality from the note edge?
i dont donate much but that is something id for sure donate to!
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
+ $20
Sent from my SM-G925V using Xparent Green Tapatalk 2
Hey, I tried installing this and ended up in a boot loop I believe, frozen at red Verizon screen.
Can anyone advise on how to get out of this boot loop without flashing from Odin off a PC? I'm at work (I know, dumb to do this while I'm not home), and won't have a phone until tonight as a result.
Thanks.
agolfingcigar said:
Hey, I tried installing this and ended up in a boot loop I believe, frozen at red Verizon screen.
Can anyone advise on how to get out of this boot loop without flashing from Odin off a PC? I'm at work (I know, dumb to do this while I'm not home), and won't have a phone until tonight as a result.
Thanks.
Click to expand...
Click to collapse
The first boot will take a while because it wipes dalvik cache. At the time of posting this had you given it a good while like the OP mentions? since you're on Verizon, I can test directly these packages, so the only reason it wouldn't work is if the wrong build version was flashed, such as OE2 instead of OC3 or vice versa! Unfortunately if that's the case, you'll have to Odin back to stock, since you can't open up FlashFire without first booting fully. Hopefully this is a feature being worked out, though, so maybe someday!
Thanks for the reply. Is there any thing I can try to do to make it go? Possibly wipe from the boot up menu or anything of the sort?
Has this been updated to work on OE2?
danielhall2689 said:
Has this been updated to work on OE2?
Click to expand...
Click to collapse
yes and all info is HERE and also located in OP
Related
Description
The Galaxy S4, like its predecessors and some other devices, has a hardcoded "increasing ring" feature where the ringtone starts out quiet and gradually gets louder, reaching full volume in about 3 or 4 seconds. Some people don't want this (like me).
There are two ways to work around this behavior. First, you can use an app, such as Disable Increasing Ring. The advantage is that you don't need root. The disadvantage is that now you have an app running 24/7, using up memory unnecessarily, albeit a very small amount. The second solution is to patch the SecPhone.apk. That's what this mod does.
Most of the credit goes to gharrington in this post whose method I used to patch SecPhone.apk.
Feel free to use in ROMs, redistribute, etc., but remember to give credit.
Instructions
As with all mods, nandroid backup in case something goes wrong. This mod is provided as-is, use at your own risk, etc.
You can install this one of two ways. The ZIP file can be installed from pretty much any recovery, such as TWRP. It will automatically clear cache/dalvik. Or you can manually copy over the APK with a root file explorer.
Note
I'm using a MDC ROM currently, so I modded the SecPhone.apk that came with MDC. I don't know if that particular apk has changed in later official ROM updates. I can easily perform this mod on newer versions if someone wants to PM me newer SecPhone.apk file in /system/app. I'll try to keep this thread up-to-date as newer updates come down the pipe for as long as I have this device.
Download
Update zip: SecPhone.zip - 9.11 MB
APK file: SecPhone.apk - 10.51 MB
thx1200 said:
The Galaxy S4, like its predecessors and some other devices, has a hardcoded "increasing ring" feature where the ringtone starts out quiet and gradually gets louder, reaching full volume in about 3 or 4 seconds. Some people don't want this (like me).
There are two ways to work around this behavior. First, you can use an app, such as Disable Increasing Ring. The advantage is that you don't need root. The disadvantage is that now you have an app running 24/7, using up memory unnecessarily, albeit a very small amount. The second solution is to patch the SecPhone.apk. That's what this mod does.
Most of the credit goes to gharrington in this post whose method I used to patch SecPhone.apk.
As with all mods, nandroid backup in case something goes wrong. This mod is provided as-is, use at your own risk, etc.
Feel free to use in ROMs, redistribute, etc., but remember to give credit.
I'm using a MDC ROM currently, so I modded the SecPhone.apk that came with MDC. I don't know if that particular apk has changed in later official ROM updates. I can easily perform this mod on newer versions if someone wants to PM me newer SecPhone.apk file in /system/app. I'll try to keep this thread up-to-date as newer updates come down the pipe for as long as I have this device.
Update zip: SecPhone.zip - 9.11 MB
APK file: SecPhone.apk - 10.51 MB
Click to expand...
Click to collapse
Here is a copy of the SecPhone.apk from an MDL rom.
EDIT: didn't attach because file was too big. Here it is. http://db.tt/fSdHsgKU
Do we just install the. Zip as normal in twrp?
Sent from my SPH-L720 using xda premium
adrianjr84 said:
Do we just install the. Zip as normal in twrp?
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
It appears as though you can flash the zip in recovery. The .apk is also attached, so you could move that to system/app to replace your existing secphone.apk, set permissions and reboot. Or you could adb push the .apk to the system/app directory and adb reboot. I'm pretty sure any of those methods will work.
Any chance of getting call record enable in your apk?
Sent from my SPH-L720 using Tapatalk 2
Thanks
Love the 90s Good Times.
---------- Post added at 03:10 AM ---------- Previous post was at 02:55 AM ----------
thx1200 said:
The Galaxy S4, like its predecessors and some other devices, has a hardcoded "increasing ring" feature where the ringtone starts out quiet and gradually gets louder, reaching full volume in about 3 or 4 seconds. Some people don't want this (like me).
There are two ways to work around this behavior. First, you can use an app, such as Disable Increasing Ring. The advantage is that you don't need root. The disadvantage is that now you have an app running 24/7, using up memory unnecessarily, albeit a very small amount. The second solution is to patch the SecPhone.apk. That's what this mod does.
Most of the credit goes to gharrington in this post whose method I used to patch SecPhone.apk.
As with all mods, nandroid backup in case something goes wrong. This mod is provided as-is, use at your own risk, etc.
Feel free to use in ROMs, redistribute, etc., but remember to give credit.
I'm using a MDC ROM currently, so I modded the SecPhone.apk that came with MDC. I don't know if that particular apk has changed in later official ROM updates. I can easily perform this mod on newer versions if someone wants to PM me newer SecPhone.apk file in /system/app. I'll try to keep this thread up-to-date as newer updates come down the pipe for as long as I have this device.
Update zip: SecPhone.zip - 9.11 MB
APK file: SecPhone.apk - 10.51 MB
Click to expand...
Click to collapse
Samsung should really just make that an option to disable in their next update. I miss to many calls because I heard my phone to late
Love the 90s Good Times.
Is there a way to make the mdl version. It wouldn't work for me.
Sent from my SPH-L720 using Tapatalk 2
dschachm said:
Is there a way to make the mdl version. It wouldn't work for me.
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
It worked perfectly for me, I used the .apk and followed the instructions. I'm on the Sonic rom. It's MDL.
k2buckley said:
Here is a copy of the SecPhone.apk from an MDL rom.
EDIT: didn't attach because file was too big. Here it is. http://db.tt/fSdHsgKU
Click to expand...
Click to collapse
Thanks for this, but it doesn't appear to be deodexed. Does anybody have a copy of the deodexed version?
monty_python said:
Any chance of getting call record enable in your apk?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
I'll look into it. The instructions on the post I linked to in the top post didn't work. I kept getting FC when I tried. I'll have to look around to see if anybody has figured that out yet for the S4. If you can find a guide, I'm happy to do the leg work.
adrianjr84 said:
Do we just install the. Zip as normal in twrp?
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Yes, I'll update the top post with more clear instructions.
thx1200 said:
I'll look into it. The instructions on the post I linked to in the top post didn't work. I kept getting FC when I tried. I'll have to look around to see if anybody has figured that out yet for the S4. If you can find a guide, I'm happy to do the leg work.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2268146
Sent from my SPH-L720 using Tapatalk 2
Check that link out.. Please..
monty_python said:
http://forum.xda-developers.com/showthread.php?t=2268146
Sent from my SPH-L720 using Tapatalk 2
Check that link out.. Please..
Click to expand...
Click to collapse
Excellent! That looks to be what I need. I'll check into it.
thx1200 said:
Excellent! That looks to be what I need. I'll check into it.
Click to expand...
Click to collapse
Man your a life saver if you get this thing going..
Sent from my SPH-L720 using Tapatalk 2
monty_python said:
Man your a life saver if you get this thing going..
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Well I applied the necessary patches, but it didn't work. The button appears, but the button doesn't activate anything or sometimes the phone app just crashes when you press it. It just might not work with MDC as I saw others stating basically the same thing with MDC ROMs. You can try the MDN version in that post. Unfortunately, I don't know enough about what's going on behind the scenes, so I don't know how to debug this. It's too bad because call record would be really handy.
Still waiting on ForceROM to update to MDL then I can get to work on the MDL version.
Can you post the file so I can try it? Im on ForceROM running MDL...
Sent from my SPH-L720 using Tapatalk 4 Beta
thx1200 said:
Well I applied the necessary patches, but it didn't work. The button appears, but the button doesn't activate anything or sometimes the phone app just crashes when you press it. It just might not work with MDC as I saw others stating basically the same thing with MDC ROMs. You can try the MDN version in that post. Unfortunately, I don't know enough about what's going on behind the scenes, so I don't know how to debug this. It's too bad because call record would be really handy.
Still waiting on ForceROM to update to MDL then I can get to work on the MDL version.
Click to expand...
Click to collapse
I appreciate the effort and I'm sure we somehow will get a universal record method on this soon..
Sent from my SPH-L720 using Tapatalk 2
Following is MDL Stock Deodexed secphone.apk.
http://db.tt/f4fNyTiQ
damn I'm running rooted stock rom and I used the apk method... I messed up the phone
any chance to get back to stock secphone.apk? like a dumb I didn't save the original apk...
model gt i9505 snapdragon 600
thanks
What did you change to disable the ascending ringtone? I'm trying to disable it on my Note 3, but so far nothing is working
EDIT: Nevermind, used Wanam Xposed
LightlyCleaned/Rooted ROM - OE2
How's it going guys! Since no one else has released a ROM yet for OE2 I'd release what I made for myself This is lightly cleaned, removing what I found to be unnecessary.
PLEASE READ!
You're going to have to be on OC3 right now to flash this, since OE2 itself doesn't have root yet! You can be deodexed/odexed, running a custom ROM, whatever, it'll work. HOWEVER, you will need to flash an additional package with ODIN or whatever tool you use, since the modem/recovery/boot(/kernel)/cm/sboot was updated. You can't use FlashFire for this right now, since it does not detect the cm/sboot files within the package, and they need to be updated for the phone to boot. I tried updating them with a zip package, however it didn't stick. So alas, ODIN it is, for now... So, flash this before booting into the ROM for the first time, by holding down Power + Home + Volume Down until you see the Download Screen. Let go, then press Volume Up. Flash accordingly, making sure to put the *.tar package in the AP section..
This allows you to be on OE2, and maintain root
I'm not responsible if anything bad happens.
Quick Step-By-Step: 1. Flash the ROM using FlashFire. Then immediately after it is done... 2. Flash the TAR package using ODIN 3. Party
HINT (thanks @coton!): You can change the Reboot Settings within FlashFire so that once it's done doing its thing, it can automatically reboot into download mode Just select my package in "Flash ZIP or OTA", then once configured at the bottom click "Reboot". Select "Download" and you are good to go!
Downloads
ODIN PACKAGE (MUST FLASH IMMEDIATELY AFTER FLASHFIRE FINISHES) : MEGA Download Link
ODEX:
OE2 - MEGA Download Link
VisualVoiceMail - View attachment Trailblazer101_925V_OE2_VisualVoiceMail_Odexed.zip
DEODEX:
OE2 - MEGA Download Link
ThemeStore FIX - MEGA Download Link
VisualVoiceMail - View attachment Trailblazer101_925V_OE2_VisualVoiceMail_Deodexed.zip
XDA:DevDB Information
LightlyCleaned/Rooted ROM - OE2, ROM for the Verizon Samsung Galaxy S6 Edge
Contributors
trailblazer101
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Beta
Beta Release Date: 2015-06-06
Created 2015-06-06
Last Updated 2015-06-06
So does this still make us lose root? But prior to flashing you've cleaned it a bit?
Sent from my SM-G925V using XDA Free mobile app
Looks great. Can't wait to try!!!
Powell730 said:
So does this still make us lose root? But prior to flashing you've cleaned it a bit?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
Nope, it's rooted
trailblazer101 said:
Nope, it's rooted
Click to expand...
Click to collapse
Nice! How'd you manage that without an updated version of pingpong? So this essentially gives us the OTA update with root?
Sent from my SM-G925V using XDA Free mobile app
trailblazer101 said:
Nope, it's rooted
Click to expand...
Click to collapse
You sir are the man!!! Thank you donation coming. So I'm assuming once we use this update method we can flash any future rooted oe2 roms with flashfire?
Which odin version do you use on the s6?
Sent from my SM-G925V using Xparent Green Tapatalk 2
Powell730 said:
Nice! How'd you manage that without an updated version of pingpong? So this essentially gives us the OTA update with root?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
Here's a long answer, for ya I started on a OC3 rooted ROM. I modified the OE3 update package to allow flashing this on a rooted build. Flashed it, then extracted the new system files (as they were now patched/updated). I manually patched the boot.img and modem.bin files by placing the originals from the OC3 ODIN package, and running "applypatch" on them with the patch provided from the update package. Patching the recovery was more tricky, because of the way the update package was set up. So I had to use the included sh script to patch and install the latest recovery, and then extract it using adb shell and "cat ....". I had to open that pulled recovery then in a hex editor because it included a lot of empty space at the end. After that, I confirmed the sha1 matched what it was supposed to be as mentioned in the updater-script from the official package, and it did!
2swizzle said:
You sir are the man!!! Thank you donation coming. So I'm assuming once we use this update method we can flash any future rooted oe2 roms with flashfire?
Which odin version do you use on the s6?
Sent from my SM-G925V using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Thank you and yup!
trailblazer101 said:
Here's a long answer, for ya I started on a OC3 rooted ROM. I modified the OE3 update package to allow flashing this on a rooted build. Flashed it, then extracted the new system files (as they were now patched/updated). I manually patched the boot.img and modem.bin files by placing the originals from the OC3 ODIN package, and running "applypatch" on them with the patch provided from the update package. Patching the recovery was more tricky, because of the way the update package was set up. So I had to use the included sh script to patch and install the latest recovery, and then extract it using adb shell and "cat ....". I had to open that pulled recovery then in a hex editor because it included a lot of empty space at the end. After that, I confirmed the sha1 matched what it was supposed to be as mentioned in the updater-script from the official package, and it did!
Thank you and yup!
Click to expand...
Click to collapse
Where's your donation link?
Also, once we flash the ODIN package; I assume we just boot into the OC3 rom to flash the OC2 via flashfire?
Sent from my SM-G925V using XDA Free mobile app
Powell730 said:
Where's your donation link?
Also, once we flash the ODIN package; I assume we just boot into the OC3 rom to flash the OC2 via flashfire?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
If you wanted to donated the 'Donate to Me' button underneath my profile (to the left of this post!) would work Thank you for your thanks!
Here's the steps, that'll break down simply and put on the OP for everyone 1. Flash the ROM using FlashFire. Then immediately after it is done... 2. Flash the TAR package using ODIN 3. Party
trailblazer101 said:
If you wanted to donated the 'Donate to Me' button underneath my profile (to the left of this post!) would work Thank you for your thanks!
Here's the steps, that'll break down simply and put on the OP for everyone 1. Flash the ROM using FlashFire. 2. Flash the TAR package using ODIN 3. Party
Click to expand...
Click to collapse
Sorry, using the XDA app and didn't see it. Thank you!
Sent from my SM-G925V using XDA Free mobile app
Fantastic work, Trailblazer!
Donation sent - Confirmation number: 58912434X51069600
Marilyn
---------- Post added at 05:18 PM ---------- Previous post was at 04:58 PM ----------
Why are you re-uploading the downloads, is there a problem with the previous ones, as I just flashed the odexed rom, then odined the update tar, and have just booted up, everything seems fine so far.
coton said:
Fantastic work, Trailblazer!
Donation sent - Confirmation number: 58912434X51069600
Marilyn
---------- Post added at 05:18 PM ---------- Previous post was at 04:58 PM ----------
Why are you re-uploading the downloads, is there a problem with the previous ones, as I just flashed the odexed rom, then odined the update tar, and have just booted up, everything seems fine so far.
Click to expand...
Click to collapse
Think he's just using a different server.
Sent from my SM-G925V using XDA Free mobile app
Powell730 said:
Think he's just using a different server.
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
he is using a different server, he had loaded the file to his dropbox but it looks like that server isn't going to work. I was able to download the package from his dropbox though .... This guy is a beast, make sure you guys donate to him, he has created some really cool edge features already and I'm sure there's more to come. If he ever learns how to incorporate the note edge "edge functionality " I'm going to kiss him lol
2swizzle said:
he is using a different server, he had loaded the file to his dropbox but it looks like that server isn't going to work. I was able to download the package from his dropbox though .... This guy is a beast, make sure you guys donate to him, he has created some really cool edge features already and I'm sure there's more to come. If he ever learns how to incorporate the note edge "edge functionality " I'm going to kiss him lol
Click to expand...
Click to collapse
You are correct, DropBox shuts off your Public links if they get too much attention. and since you guys went ham, rightfully so (lol), they shut me down. So Mega it is, and we're half way there! Also I'm glad to hear it worked for those of you who were able to download it before!
oh and @2swizzle I'm guessing your referring to being able to have the 'feeds' while the screen is on? I've looked into it, and there was a lot of code removed that enabled that from the Note Edge to our phones-- the framework classes that incorporated it are basically stubs now. Although I could try adding it back in, in my personal opinion it'll be kind of... eh. it's not like the Note Edge where because of the more distinct curves it feels like a separate screen, of sorts, and it kind of just works. But with the S6 Edge since it's not as pronounced, it'd be more intrusive, make the aspect ratio weird, and decrease the amount of available screen size, when some already consider what we have is small, when comparing to the phablets of increasing popularity.
trailblazer101 said:
You are correct, DropBox shuts off your Public links if they get too much attention. and since you guys went ham, rightfully so (lol), they shut me down. So Mega it is, and we're half way there! Also I'm glad to hear it worked for those of you who were able to download it before!
Click to expand...
Click to collapse
Working great so far, haven't found a single bug.
For those of you who haven't downloaded yet, I noticed that with FlashFire when you set it up to flash the rom, you can set the reboot option to go directly to download mode so you're ready for the odin update.
@coton you sir/mam are a terrific human being. I forgot to mention that great little trick on the OP, I'll update it immediately! Thank you!
2swizzle said:
he is using a different server, he had loaded the file to his dropbox but it looks like that server isn't going to work. I was able to download the package from his dropbox though .... This guy is a beast, make sure you guys donate to him, he has created some really cool edge features already and I'm sure there's more to come. If he ever learns how to incorporate the note edge "edge functionality " I'm going to kiss him lol
Click to expand...
Click to collapse
coton said:
Working great so far, haven't found a single bug.
For those of you who haven't downloaded yet, I noticed that with FlashFire when you set it up to flash the rom, you can set the reboot option to go directly to download mode so you're ready for the odin update.
Click to expand...
Click to collapse
You guys wipe or dirty flash?
Sent from my SM-G925V using XDA Free mobile app
I'm on CleanRom now, will flashing this wipe everything and have to setup phone from scratch?
Powell730 said:
You guys wipe or dirty flash?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
I wiped using the default FlashFire settings.
---------- Post added at 06:15 PM ---------- Previous post was at 06:11 PM ----------
coton said:
I wiped using the default FlashFire settings.
Click to expand...
Click to collapse
Then used SmartSwitch to restore my previous backup.
coton said:
I wiped using the default FlashFire settings.
---------- Post added at 06:15 PM ---------- Previous post was at 06:11 PM ----------
Then used SmartSwitch to restore my previous backup.
Click to expand...
Click to collapse
Does smartswitch keep homescreen settings etc? You use the android app or pc app?
Sent from my SM-G925V using XDA Free mobile app
I take no credit for this ROM. All credit goes to the developer @edgarf28 and his team and testers.
Keeps knox intact, Stable, and its fast!
Center clock, Battery mods, and color customizations galore!
https://www.androidfilehost.com/?fid=24052804347761249
Install for us AT&T users is very simple but funky at the same time. Just wipe and flash with flash-fire, like normal.
Then go through the aroma set up. The ROM doesn't officially support Flash-fire but I have seen a few others in the OP from our AT&T locked Boot-loaders who have flashed this just fine also.
The funky part of the install is aroma itself. It works but flashes and flickers a lot. You can read and make out all the selections, you just have to deal with the flashing. After the install is complete click the reboot option in Aroma and it will reboot. First boot as usual takes up to 5 minute but sometimes only a couple minutes.
After flashing the ROM, use the add on zip to get back any Samsung apps that you want to have installed. This ROM is super debloated so things like themes and all cast have to be added through the add on zip Along with either the Alliance framework, or 3minit framework. I am using the Alliance framework because I like the ability to fully customize the toggles and other things more than having a bunch of different battery's to choose from.
The mod add on ZIP
https://www.androidfilehost.com/?fid=24052804347761090
Also works, but If you click the reboot option after the install it will freeze up and not restart. I dont know why it does that but just click the reboot option off and restart it yourself.
When using the alliance framework and changing the drop down toggles
do not choose "OTA flashable" toggles in the drop down menu or your UI will FC so bad you have to wipe it all and reflash everything from scratch.
Support for the rom can be found in the Developers thread.
Updated the download link to the xtrestolite 1.5 which is the only working version for AT&T
Credit to: @moofasa29 for first bring this to my attention:good:
I can try to answer your questions, since I have gone through the OP repeatedly before flashing this. But I think your questions will be better answered in and by the OP.
I also got Viper4Android working and the edge feeds for music and quick launch with no issues just following their OP threads.
This ROM is sweet so far, I have had no issues with anything since my re-flash due to the toggle issue.
Updated the download link to the xtrestolite 1.5 which is the only working version for AT&T
Back ups and GPS fix
https://mega.nz/#!1g91FSxK!STOOVbED4kuzA1OPmi3brBA01J20AU4_X_Lz6wKCjLQ - Version 1.5 for us AT&T users
https://mega.nz/#!kkcnibRa!mgvNmXmBBRo7PHLc9r6Cbr-1g7un2yqHAc1uPyZypXM - Mod ZIP
https://mega.nz/#!UslVGSCQ!_2X_iHzyVn3Y7kKyRS1KKOE02NAtMkVOgcXTFvgFkso -GPS fix
Updated 9/18/15
While it is appreciated you bringing this to the ATT users attention and walking everyone through the steps on how to flash. I would just make sure it's alright with the rom developer for you to post this in our section.
jroyalty7 said:
While it is appreciated you bringing this to the ATT users attention and walking everyone through the steps on how to flash. I would just make sure it's alright with the rom developer for you to post this in our section.
Click to expand...
Click to collapse
Funny you posted this, I sent a PM to @edgarf28 this afternoon to make sure he knew about this posted. He hasn't responded and if he does and he isn't happy with me posting a redirect post I will delete the post. I was just sharing information and wasn't thinking about stepping on toes when I wrote the OP here, I was so exited to have it working and I had to share.:good:
That was the first thing that should have been done!
justda said:
Funny you posted this, I sent a PM to @edgarf28 this afternoon to make sure he knew about this posted. He hasn't responded and if he does and he isn't happy with me posting a redirect post I will delete the post. I was just sharing information and wasn't thinking about stepping on toes when I wrote the OP here, I was so exited to have it working and I had to share.:good:
Click to expand...
Click to collapse
So, this way won't trip Knox because you're not using TWRP?
dirtyballoonot said:
So, this way won't trip Knox because you're not using TWRP?
Click to expand...
Click to collapse
No it won't
As stated in the first sentence of OP
s6freak said:
No it won't
Click to expand...
Click to collapse
Sweet. That's all that was stopping me from flashing that ROM. Here we go
dirtyballoonot said:
Sweet. That's all that was stopping me from flashing that ROM. Here we go
Click to expand...
Click to collapse
I've been running it that last couple days very solid
HAHA. Wow. Talk about stripped down. Not even File Explorer before the aroma add on package, HAHA
Speaking of. For some reason Flash Fire doesn't see the Add on...
---------- Post added 21st June 2015 at 12:26 AM ---------- Previous post was 20th June 2015 at 11:50 PM ----------
Ok, this is frustrating. I've downloaded the add on package a half dozen times. It doesn't show up in Flash Download/OTA. I can see it under flash firmware with (CORRUPT)
Disregard. Moved to root of phone and not the download folder
dirtyballoonot said:
HAHA. Wow. Talk about stripped down. Not even File Explorer before the aroma add on package, HAHA
Speaking of. For some reason Flash Fire doesn't see the Add on...
---------- Post added 21st June 2015 at 12:26 AM ---------- Previous post was 20th June 2015 at 11:50 PM ----------
Ok, this is frustrating. I've downloaded the add on package a half dozen times. It doesn't show up in Flash Download/OTA. I can see it under flash firmware with (CORRUPT)
Disregard. Moved to root of phone and not the download folder
Click to expand...
Click to collapse
It is there, scrolling through the list can be a pain but it is there.
It is weird you couldnt flash it as a normal zip from the DL folder. Thats where I flashes it from both times I flashed the rom and add-on pack.
wp4jot said:
That was the first thing that should have been done!
Click to expand...
Click to collapse
Guess I don't see how anyone wouldn't want someone to tell others about their work? either way I sent him a message.
No Samsung account.
The only issue I have found is you cannot sign into your Samsung account. Thus can't download galaxy apps.
I opened the theme store and it asked me to sign in' it signed me in just fine.
Sent from my SM-G925A using XDA Premium HD app
I tried that. Not working for me. Maybe I messed up on the aroma options or something.
mjridore said:
I tried that. Not working for me. Maybe I messed up on the aroma options or something.
Click to expand...
Click to collapse
I went through the aroma installer again this morning because I wanted the smart manager app.
There is an option for the samsung account theme store and the samsung app store. all seperate, if you go through the aroma installer again I am sure you will find it
justda said:
I went through the aroma installer again this morning because I wanted the smart manager app.
There is an option for the samsung account theme store and the samsung app store. all seperate, if you go through the aroma installer again I am sure you will find it
Click to expand...
Click to collapse
I did that previously with the same issue. I didn't resolve the issue until I opted to keep the stock framework as oppose to the alliance. Thanks for the help though.
Anyone else having GPS issues? It seems to half work. It will locate me, but not track when moving. So, nav is broken
Searching for GPS
I'm surprised it even works considering it's for the G925F lol... Then again, maybe it's just lame Verizon that causes issues with flashing a ROM from the G925F...
Read this whole OP before doing anything! Especially the bugs list !!!
** I am excited to announce that @dr.ketan 's Note 5 Port (INTERNATIONAL NOTE 4 BASED ROM)works for the Verizon Note 4 ! I am not a developer and do not take credit for this ROM. I only assisted in getting it to work for our phone. Enjoy!!
Give @dr.ketan many thanks and donate to him for developing his Note 5 Port!!: http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568
Give @Battlehero a thanks and donate to him for his time and effort for creating the data fix for our Verizon Note 4 http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
Give @hsbadr a big thanks and donate to him for making this possible with his 5.1.1 Jasmine ROM and multi-system kernel!! http://forum.xda-developers.com/note-4-verizon/development/rom-jasminerom-v1-0-t3113771
Without them, this would not have been possible!
Remember that.
DISCLAIMER: Your warranty is now void. Please be careful make a full TWRP backup of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device!
*A clean flash is a must if you are coming from another ROM or you will run into problems.* Do not post issues if you dirty flashed.
**Note only Dr. Ketan's L16F Note 5 port works for our phone. He has a Marshmallow version out also, so be sure to only download the L16F version.**
Big NOTE: (Puns intended) There are OG Developer's Editions and Converted Retail Editions. OG's, including me, have an aged KitKat 4.4.4 unlocked bootloader and we need to use multi-system kernel that @hsbadr patched to fix the brightness issue that was present during the Lollipop upgrade. We are forever in his debt. Converted Retail Editions have a newer Lollipop 5.1.1 unlocked bootloader meaning they can try other Verizon specific kernels without the brightness issue (You might come across other issues trying other kernels so please state what kernel you're using if you experience an issue). I'm also believing that it is possible that converts can experience issues that OG's don't experience due to the difference in bootloaders, and vice versa. It would be nice to know your build if you experience an issue. Thanks!
Instructions:
1.) Make sure you are on a 5.1.1 modem.
(N910VVRU2BOK3) or (N910VVRU2BPA1)
2.) Download the ROM to your SD
3.) Download the DataFix to your SD
4.) Wipe /system /data /cache /dalvik-cache (/InternalStorage Optional, you will lose your files on the device)*
5.) Flash the ROM.
6.) Flash the DataFix.
7.) Wipe Dalvik and Cache
8.) Reboot. (Will take about 10-15 mins to boot)
9a.) Wait until there is a prompt to install necessary patches and allow root access
9b.) Chose your battery and clock settings then reboot
10.) Go through the setup but do not log into the Samsung account or Google account during initial setup
11.) After the setup log into your google account
12.)Initially there is no calling audio and no My Verizon application support.
To fix this download root browser and navigate to the system folder and edit the build.prop by clicking on the build.prop file > use rb text editor > change these values to:
ro.product.model=SM-N920V
ro.product.name=trltevzw
*Note it is case sensitive*
Then click save
Then using root browser navigate to the system/privapp folder and delete the VzwSilentSSOEngine folder
Then reboot
**Note: On My Verizon you will need to log into your account using your user name and not your number**
13.) Enjoy!!
Once you are at your home screen make sure you are logged into your Google account before accessing Dr. Ketan Tweaks app because there is a dependency app that is required to be installed from the Play Store when you launch Dr. Ketan tweaks app.
To disable infinite scroll on TW launcher go to Dr. Ketan tweaks and long press launcher home scroll then back out and test.
I tested most tweaks and they work as they should. Please post any issues on this thread.
(Please do not try any of the network based features in Ketan's tweaks as they are meant for the international Note 4)
Please read the readme before using the debloater tool to get an idea of what it removes
As of right now there is no xposed support. I will need the help from users to find the best way to get it installed and I will update the OP with instructions.
Downloads:
Again **Note only Dr. Ketan's L16F Note 5 port works for our phone. He has a Marshmallow version out also, so be sure to only download the L16F version.**
Download Dr.Ketan ROM L16F ( N5 port I Theme support I S6 Edge features ) : http://forum.xda-developers.com/showpost.php?p=65792766&postcount=6872
Scroll down to where it says:
"Download*- T-Mobile Users Read*this."
Expand the hidden content to get the download link.
then
Download @Battlehero 4/18/16 Data Fix V3.3 here (Go to the third post and expand "US Variants", look for N910V datafix): http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
**READ ME**
Bugs:
- No GearVR support
- *MMS does not work correctly on the stock Messaging app (group chats come in and send as individual messages, and unable to send picture messages)
**(Workaround: Use Textra as default messaging app, MMS works like it should)**
- Unable to perform a factory reset within the settings because you will get non-stop FC's once booted up.
- If you do not wipe internal storage any old Note 2 files in you SNote data folder will kill the SNote app. So remove them from that folder and you'll be able to use SNote.
- System update in settings force closes the Settings
- Simultaneous data works at 4G speeds when talking on the phone but it shows it as a 1X connection. (Must have a 4G connection to work)
- To get My Verizon to work:
1. Navigate to /system/priv_app and delete the VzwSilentSSOEngine folder.
2. Edit the system/buid.prop file. Change the model value to SM-N920V and save.
3. Reboot.
4. You need to log into My Verizon using your user name your number will not work
Thanks @stueycaster and @rayjr13
- Verizon Visual Voicemail does not work and may never work
- Screen mirroring may not work
- If you change the model value in the build.prop to Verizon Note 4 model value (SM-N910V) it will break the theme store. Switch it back to SM-N920V to get theme store working again.
Read/search through the original OP threads for any non-Verizon specific issues first.
Credits:
Thank you so much @dr.ketan for developing your Note 5 Port !!
Thank you @Battlehero for creating a data fix for our phone !!
Thank you @hsbadr for your constant development and support for the Verizon Note 4, and of course for Jasmine ROM and multi-system kernel !!!
Reserved
Sent from my SM-N920V using Tapatalk
Awesome, thanks. Gonna try this one out.
Just a question though, which is the main difference between kyubi and this one, I don't want to start which is better but I would like to ask which is main difference thanks a bounch
Sent from my Samsung Galaxy Note5 using XDA Labs
EdrickMG said:
Just a question though, which is the main difference between kyubi and this one, I don't want to start which is better but I would like to ask which is main difference thanks a bounch
Sent from my Samsung Galaxy Note5 using XDA Labs
Click to expand...
Click to collapse
Check the original OPs they have their features listed but in my experience Ketan's has more mods and Kyubi is closer to stock Note 5.
Sent from my SM-N920V using Tapatalk
jcip17 said:
Check the original OPs they have their features listed but in my experience Ketan's has more mods and Kyubi is closer to stock Note 5.
Click to expand...
Click to collapse
I have seen that comes with a bounch of mods, some cool, but a little bit to much tweaks for me, but wonderful there are some other Roms could be used, thanks for testing it out and posted it
Sent from my Samsung Galaxy Note5 using XDA Labs
EdrickMG said:
I have seen that comes with a bounch of mods, some cool, but a little bit to much tweaks for me, but wonderful there are some other Roms could be used, thanks for testing it out and posted it
Sent from my Samsung Galaxy Note5 using XDA Labs
Click to expand...
Click to collapse
Most of the tweaks are optional. His tweak app lets you pick it's awesome that he created that. But yeah ROM options are always a good thing !
Sent from my SM-N920V using Tapatalk
google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
out going calls not working for me, i'm able to see the seconds on the call but not hearing anything.....
laughingcolors said:
google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
Click to expand...
Click to collapse
Hmm that didn't happen to me but I do know that google playstore will update eventually so that might be causing problems. Also did you log in during the initial setup? I didn't not sure if it makes a difference.
Sent from my SM-N920V using Tapatalk
laughingcolors said:
google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
out going calls not working for me, i'm able to see the seconds on the call but not hearing anything.....
Click to expand...
Click to collapse
You changed the value in the build.prop on step 11?? That is what fixes the calling issue. Hmm are you a Retail convert or you had a dev edition?
Sent from my SM-N920V using Tapatalk
have a developer edition, no i didn't change any build props , i will try but haven't done that...
---------- Post added at 02:11 AM ---------- Previous post was at 02:10 AM ----------
jcip17 said:
Hmm that didn't happen to me but I do know that google playstore will update eventually so that might be causing problems. Also did you log in during the initial setup? I didn't not sure if it makes a difference.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
yeah i did log in in initial setup, not on the samsung part though.
laughingcolors said:
have a developer edition, no i didn't change any build props , i don't know how...
Click to expand...
Click to collapse
Yeah you have to do that. Download root browser go to the system folder > Click on the build.prop file > use rb text editor > find those two values towards the top and change them to what is listed on step 12. It is case sensitive > then click save > then reboot calling will work
That is weird about the play store. If you don't mind try starting over and skip both the google sign in and samsung sign in
Sent from my SM-N920V using Tapatalk
jcip17 said:
You changed the value in the build.prop on step 11?? That is what fixes the calling issue. Hmm are you a Retail convert or you had a dev edition?
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
changing the build prop worked, thanks !
laughingcolors said:
changing the build prop worked, thanks !
Click to expand...
Click to collapse
Good to hear man ! Did the play store stop acting up?
Sent from my SM-N920V using Tapatalk
@jcip17.....wow you just keep the hits coming!! So many customizations. I haven't taken the plunge yet. ..but will soon. Thank you for bringing these note5 ports over to us. I know where the credits go ....just wanted to thank you for doing your part! Hahaha.
Sent from my SM-N920F using XDA-Developers mobile app
jcip17 said:
Good to hear man ! Did the play store stop acting up?
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
no it closes after it starts a download. i'll give it time to settle i guess.
laughingcolors said:
no it closes after it starts a download. i'll give it time to settle i guess.
Click to expand...
Click to collapse
Damn ok wait till it updates itself. You'll get the Google Play Store splash screen when you launch it once it's done updating. Hopefully that fixes it. I really wonder if logging on during the setup causes that. Regardless I updated the OP to hold off on logging onto google until after initial setup to make it exactly how I had it set up.
Sent from my SM-N920V using Tapatalk
gcounts said:
@jcip17.....wow you just keep the hits coming!! So many customizations. I haven't taken the plunge yet. ..but will soon. Thank you for bringing these note5 ports over to us. I know where the credits go ....just wanted to thank you for doing your part! Hahaha.
Sent from my SM-N920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks man I really appreciate that !
Sent from my SM-N920V using Tapatalk
why won't the mm version work...
lolwatpear said:
why won't the mm version work...
Click to expand...
Click to collapse
We don't have a Verizon MM kernel or MM modem. We only have Lollipop for now. Once we receive a MM Verizon update then maybe we'll be able to get it to work for our phone. Something to look forward to !
Sent from my SM-N920V using Tapatalk
Why call this rom the PlayStore Rom? Because this rom features absolutely nothing, thats the beauty of it! If you want something your going to have to get it from the PlayStore. You can customize it any way you want. The rom boots and you can make a phone call and get on the playstore thats about it. So have fun!
Features
Google Dialer and Google Contacts
S7 Camera
Google Launcher
Samsung Gallery Left so Lockscreen Wallpaper can be changed
Google Now
Google Maps
Verizon Visual Voicemail
L Speed (for tweeks and other stuff)
Thats It No More! Dont Ask Thats why its called the Playstore Rom. If you want it download it!
Bugs
Alot of things will not work or may FC in settings. This is because it is removed. Deal with it!
Install Instructions For PI3 International Firmware
Note about new rom
This will require you to reinstall The PEH firmware and reroot. Once done The new rom will flash files not a system.img any more. The zip file will be alot smaller. I think this will also help on the MMS problem for some people, as the system partition was getting messed up during multiple flashes of system.img images
Recommended you be on PH1 or PI3 firmware and Rooted
Install Flashfire
G930U_PEH_Deodexed_BS_Free_Rom.zip on internal or sdcard
Open FlashFire and agree to terms
Click the + button in the actions menu
Click Flash Zip or OTA and locate VZW_G935U_PI3_DEODEX_AROMA_V1.zip_Rom.zip and click on it
In Options menu leave the box Mount/system read/write checked and click the check mark in the top right corner of options menu to flash this rom
Leave EverRoot disabled
Leave reboot menu set to normal
Click On The Big Flash Box at Bottom With the Red lightning bolt to flash rom
This zip will wipe data but not internal storage
View attachment 3814934
Downloads
VZW_G935U_PI3_DEODEX_AROMA_V1.zip
Change Log
V2
Zip flashes files now no more system.img
Added root essentials which includes a root browser and lots of other cool features.
Added force doze which will increase battery life by up to 40 percent,
Added Adaway for add blocking
Updated FlashFire to V52
Includes Previous Fix
Post Install Instructions
You must decide if you want to use Google IncallUI or Samsung InCallUI. Samsung InCallUI will allow too still receive and switch to video calls and the google IncallUI will only support HD calling. To switch to google IncallUI goto settings/applications click on default applications choose calling app and click on the blue phone app. To switch back to samsung IncallUI is a little more complicated. You will need an app like root explorer and goto data/system/users/0 and then findthe setting_secure.xml and delete and then restart phone. This will restore samsung IncallUI as default
You will also want to turn edge features off since everthing is deleted
Also you need to goto SuperSU app and goto settings and click on enable su during boot and also click trust system users
Goto this thread and under Recommended Next Steps find the S7_or_S7Edge_Fixes_V15.zip or latest version and flash to fix kernel lage and doze fix.
Goto setting/about phone
Click on build number 5 times to enable developer options
Change animation and duration scales to .05 this will speed up phone
You will also have to change charging/file mode from within developer options
Remember Wiping Dalvik cache will cause phone to take up to 10 min to boot on deodexed roms
If using samsung IncallUI here is a fix for call phone FC and also location service fix
Phone_Fix_Misc_Fix.zip
Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk
markwebb said:
Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Of course it is different read the OP
Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk
@jkruse Thanks bro appreciate your efforts. One favor, do you know where the Olympic theme is located on your first Rom? (Which folder?) I'm going to extract it from the other version and install it in this one. For some reason its not on the Samsung theme store.
markwebb said:
Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Real talk you're an awesome dev
jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Ok, that is what I thought. I just was trying to determine if there was anything else major missing from that other ROM, knowing some apps would have to be pulled or installed, hence your "Playstore" moniker for this ROM. Ok, this is a good clean base ROM for those who like to order "a la carte" down the road when the need for other features are required. I may give it a spin for the fun of it.
Cool! We are good.
sweet idea
Inb4 crazy high battery stats
Just finished flashing about 4 minutes ago. Still suck on the white SAMSUNG logo. Is this normal?
UPDATE: Took like 8 minutes to boot. Runs fine.
Downloading now. Been waiting for something like this. Cheers.
ShadowyStorm said:
Downloading now. Been waiting for something like this. Cheers.
Click to expand...
Click to collapse
Super smooth. Thank you good sir.
If using samsung IncallUI here is a fix for call phone FC and also location service fix for apps not asking proper permission
Phone_Fix_Misc_Fix.zip
Should we flash this either way?
bickfordman said:
Should we flash this either way?
Click to expand...
Click to collapse
I'm using the Google incall with no issues at all. Probably no need to flash if that's what you're using.
So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.
Hey I'm considering installing this ROM because I live the minimalism of it. How's the performance? Anyone mind posting an AnTuTu score?
Syn Ack said:
So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.
Click to expand...
Click to collapse
I actually found one of the battery saver apps to be causing the issue. I think it was amplify through xposed, it caused the mobile data to turn off when connected to wifi. So, i turned it off and haven't had an issue since.