Related
Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
I'm running Supersu 2.42 and latest TWRP recovery.
I rooted via instructions on this thread: http://forum.xda-developers.com/moto-g-2014/development/xt1064-lollipop-root-t2938051
Wifi on/off slider won't even toggle. I press it and animates, showing it recognized my touch, then it just slides back into off.
I tried all of the methods in this thread already: http://forum.xda-developers.com/showthread.php?t=2619553 , which includes:
creating/replacing file in /persist.img.
Doing a complete wipe, wiped cache partition and dalvik cache.
Restoring factory settings.
I also tried several wifi-fix apps.
Nothing worked. I've been at it for hours.
Please someone tell me I just did something obvious and dumb so I can be done with this disaster.
How do I get my wifi working?
Also, on the off chance this has anything to do with it, whenever I start up the phone it goes into a bootloop on the "Warning:Your bootloader is unlocked" screen. It takes about ten minutes of looping to start up.
I had the same issue on the xt1064. I wasn't able to fix it so I had to reflash and stay unrooted on lollipop.
mianuddin said:
I had the same issue on the xt1064. I wasn't able to fix it so I had to reflash and stay unrooted on lollipop.
Click to expand...
Click to collapse
Sounds to me it is a problem with the wlan driver module, try after attempting to turn wifi on, check dmesg output lines on shell related to wlan also you might want to check the output of command
Code:
insmod /system/lib/modules/wlan.ko
if it reports any error.
My wild guess is it is a mismatch between the kernel version and the module version and/or related to the whitelist it uses to load modules. Maybe your module wasnt updated or something bizarre happened. Anyways the commands above would give some insight.
Good luck.
I'm in the same situation
what did you end up doing? I have the same problem after installing a ROM of xt1033 (Brazil retail) in my xt1032, to upgrade to 5.0.1, My wifi toggle doesn't work, I'm in 5.0.1 but GPE, i have flashed the kernel and the radio, copy the .bin file in persist folder, but without the MAC adress because I couldn't know what was it, tried wifi fixer apps, wiped, nothing works,
what should I do? I've been 2 weeks like this, some help please...
Rooted, Bootloader unlocked, TWRP installed, Xposed Running. 5.0 - I did not yet update or press update ever, If I have ever accidentally allowed it to begin downloading I kill the download by deleting the file using SDMaid.
I got home, had problems with other devices, phone was on about 40% at this point. I remember hearing the phone reboot, I noticed it went into TWRP, which was strange, I restarted system > powered up > lockscreen > restart to twrp with no interaction. Phone is now getting low 21%ish. Fix permissions - because used to be the all out fix on my other devices.
Same thing again > straight into twrp.
I notice that some scripts have been ran in the twrp console. Something along the lines of Victara_en_US.zip Some red scripts I assume saying failed to update.
I assume the phone is now too low to power up.
It shows no sign of charging since leaving the last twrp reboot.
Green light in top speaker shows when attempting to power up with usb charger plugged in > nothing else happens.
With charger unplugged from phone I see my modified logo screen and the moto planet spinning before phone turns off completely. This process now repeats.
Anyone have any idea what the hell is wrong with my phone?
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
THE-M1GHTY-BUKO said:
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
Click to expand...
Click to collapse
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
mikeoswego said:
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
Click to expand...
Click to collapse
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
TyNote3Krill said:
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
Click to expand...
Click to collapse
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
THE-M1GHTY-BUKO said:
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
Click to expand...
Click to collapse
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
TyNote3Krill said:
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
Click to expand...
Click to collapse
Am I able to flash anything other than the stock 5.0? Last I checked I had converted whatever I had to the x1095. I remember everything being easier on other phones...
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
THE-M1GHTY-BUKO said:
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
Click to expand...
Click to collapse
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
TyNote3Krill said:
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
Click to expand...
Click to collapse
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
mikeoswego said:
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
Click to expand...
Click to collapse
I tried wiping data to no avail.
Im trying to download stock 5.0 for now but the download is taking decades for some reason. Do you, or anyone else, recommend any roms which I can easily flash without having to worry about modem files?
THE-M1GHTY-BUKO said:
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
Click to expand...
Click to collapse
Hopefully this could provide more information for your situation?
http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3185945
Thank you for your help, as well as anyone else who helped me. I now have a running phone on 5.1.
How do I gain root from here? My superuser app updated and now tells me I have no binary, despite telling me to flash something only 5 minutes prior.
Sent from my XT1095 using XDA Free mobile app
So you don't have root? I would suggest rooting using towelroot. Go online and search "towelroot" click on the first result, click on the lambda to download the apk, and install it. You can then open the app, and press "make it ra1n" to root your device without any reboot needed.
I had root prior to wiping and installing the 5.1 update that was linked to me. Towelroot gives me the phone not supported message.
Sent from my XT1095 using XDA Free mobile app
Towel root does not work in 5.1.
To root just flash TWRP. Start TWRP. When you exit TWRP it will ask you if you want to root it. Simple.
Sent from my XT1095 using Tapatalk
I'm still in the "phone not responding" phase.. how did you manage to get in the bootloader from there? Tnx!
I found a chainfire autoroot IMG that rooted my phone. Found xposed too. I'm back at a fully working phone now, thank you to all who helped me.
Gotta say, the battery life on 5.1 is a hell of a lot better.
Sent from my XT1095 using XDA Free mobile app
As in you can't get it to fastboot?
I left it to charge for a while, then took about 5 minutes attempting the power button volume button combo to restart and get it into fastboot.
I believe that it's something like:
Power + vol down until the phone screen flashes/green light goes off
Then
Still holding the power and volume down
Hold the vol up too
Then release the power still holding the vol up and down.
That's what worked for me. It's literally the most awkward phone I've had go button combos.
I think vol up from powered off works too.
If you mess up just hold the power and vol down again.
Sent from my XT1095 using XDA Free mobile app
Hi all,
I have a big problem with my phone.
I wanted to try out Resurrection Remix on my phone.
I installed twrp-3.0.2-0-dogo.img with fastboot.
After reboot i saw the Teamwin logo and then i did a full wipe of everything, except SD Card (like i always do when i install a custom rom)
Then i installed Resurrection Remix M v.5.7.3.zip from sd and gapps, then wiped cache and pressed reboot.
No error with flashing, when the phone booted and i saw some logo's, took like 2-3 minutes and then the phone went off and started to reboot and reboot, had to take the battery off to let it stop.
Since then my phone isn't working properly, i tried to flash different kinds of stock roms with flash tool including wipe options.
No errors with flashing, but the phone still doesn't boot or it goes off after Sony logo then i leave the battery out for 10 mins or so then it starts and it looks normal, i can install aps, i can call, but the first time when i reboot my phone with this new install it's back to rebooting. I tried to leave my battery out for 10 hours but it doesn't help.
I tried to relock my bootloader and then unlock it again.
If i tried to install twrp-3.0.2-0-dogo.img it's going to reboot also, i tried airless or evomix kernel, then recovery starts but when i try to install a custom rom zip, and try to flash it my phone reboots after 5 seconds.
And now i don't know what to do anymore, so please anyone? help?
Thanks in advance!
did you try installing stock rom with flashtool ?
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
falptekin said:
did you try installing stock rom with flashtool ?
Click to expand...
Click to collapse
Yes, i tried atleast :
C5503_10.1.1.A.1.310_GLOBAL-LTE.ftf
C5503_10.6.A.0.454_HK.ftf
C5503_10.7.A.0.228_TR.ftf
And used all wipe options.
I used Emma tool, after that i removed the battery from the phone for 48 hours, then it booted the second time. I charged the battery and i left it like this for a few hours, then i tried to reboot but it went off after 20 seconds, tried to boot again but it goes off after Sony logo.
Røbin said:
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
Click to expand...
Click to collapse
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Fuchsia said:
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Click to expand...
Click to collapse
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Røbin said:
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Click to expand...
Click to collapse
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Fuchsia said:
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Click to expand...
Click to collapse
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Røbin said:
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Click to expand...
Click to collapse
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Fuchsia said:
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Click to expand...
Click to collapse
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Røbin said:
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Click to expand...
Click to collapse
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Fuchsia said:
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Click to expand...
Click to collapse
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Røbin said:
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Click to expand...
Click to collapse
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Fuchsia said:
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Click to expand...
Click to collapse
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Røbin said:
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Click to expand...
Click to collapse
My phone don't have any partition recovery, i tried 100x times with stock rom to boot recovery, with buttons, with apps that boot in recovery. I do have recovery with RR rom, but it's not in the recovery partition. I tried Tesla, CM 13, XOSP but still no recovery. I tried to boot recovery with all roms, but it doesn't matter. It's fine now, been playing a bit with RR and it's a nice rom. Thank you for helping.
my galaxy note 4 (sm-n910t) caught in bootloop . i dont know what caused it. the phone simply restarts upto first bootscreen, ie upto 'samsung galaxy note 4' and then vibrates and then restarts.this process continues upto battery is down or i pull out battery.the phone is not entering to recovery mode but enters to download mode.
i have tried installing stock rom from sammobiles but it won't help.i have also installed custom recovery twrp but that also won't help to enter to recovery mode,
i am trapped pls help..
You didn't mention how you tried to install the stock ROM . Did you use Odin?
I just fixed mine with the same issue. I was able to boot into recovery and download mode but mostly download mode without bootloop when I had the usb cable plugged in. I used ADB when I could to boot into download mode, but the buttons worked too. Trying to restart the phone only lopped after the Google screen.
I followed several guides here to flash stock with Odin and wipe cache etc but none solved my boot loop issue. almost gave up but there is a video on You Tube that said the battery warping in the cause of the boot loop. The battery, after/during quick charge, may heat up and change shape causing the issue. Today I installed my new battery purchased on amazon and no more issues.
Now I am on stock and have to find a good rom.
If you do decide to flash back to stock there are a lot of good guides. You may find yourself stuck on the T-mobile screen for 15 minutes when booting for the first time but that is ok. If you still boot loop after installing stock and wiping cache I would try the battery.
Nabeel mhd said:
my galaxy note 4 (sm-n910t) caught in bootloop . i dont know what caused it. the phone simply restarts upto first bootscreen, ie upto 'samsung galaxy note 4' and then vibrates and then restarts.this process continues upto battery is down or i pull out battery.the phone is not entering to recovery mode but enters to download mode.
i have tried installing stock rom from sammobiles but it won't help.i have also installed custom recovery twrp but that also won't help to enter to recovery mode,
i am trapped pls help..
Click to expand...
Click to collapse
hi OP,
did you find any solution to your problem?
Hello all. I'm also pasting this in the T-mobile thread in case it can be of benefit to someone. This is advice to use as a very last resort if you are experiencing the recovery bootloop issue AND you don't have the emmc failure bug. I had the recovery reboot, sudden shutdown with no warning, etc. issue for the past two weeks. I tried everything on Google and Youtube to fix my problem with no success. I flashed multiple stock ROMS and recovery tars (stock and TWRP) via ODIN, but nothing worked. Oddly enough, I never received the emmc error that I have read about. Also, in the few times that my phone booted normally, I even loaded the Wakelock Power Manager app, set it to partial wakelock and my phone STILL continued to bootloop. As a last resort, I bought a new battery, but the reboot problems continued in Android 4.4.4 Kitkat, 6.0 Marshmallow, 7.1 Nougat and 8.1 Oreo ROMS. Well, here is what finally helped me to get my phone back operational. I had a backup ROM from a previous install and a TWRP flashable version of the same ROM on my SD card (in case the phone did not stay on for the full restore). I put the phone into a ziplock bag into a freezer for about 20 min. (thankfully this time TWRP stayed on long enough for me to do the following):
1) copy all the files I wanted to save from internal storage to a computer.
2) performed a full wipe (Dalvic, Cache, System, etc. Like when flashing a ROM, but this time also internal storage. Note: Please do not wipe both internal and SD card, as you may have a difficult time trying to load the ROM file back on the sd card (assuming you don't have a card reader).
3) After wiping, I was able to restore my stock ROM backup (or you can just flash the stock ROM).
I can't be 100% sure, but I think my wiping internal and then flashing the stock ROM finally did the trick. Since this morning, the phone has been pretty much back to as it was before. In either case, I'm sharing this with the hope that it helps someone else.
Sent from my SM-N910T using Tapatalk
chrismcnally123 said:
I just fixed mine with the same issue. I was able to boot into recovery and download mode but mostly download mode without bootloop when I had the usb cable plugged in. I used ADB when I could to boot into download mode, but the buttons worked too. Trying to restart the phone only lopped after the Google screen.
I followed several guides here to flash stock with Odin and wipe cache etc but none solved my boot loop issue. almost gave up but there is a video on You Tube that said the battery warping in the cause of the boot loop. The battery, after/during quick charge, may heat up and change shape causing the issue. Today I installed my new battery purchased on amazon and no more issues.
Now I am on stock and have to find a good rom.
If you do decide to flash back to stock there are a lot of good guides. You may find yourself stuck on the T-mobile screen for 15 minutes when booting for the first time but that is ok. If you still boot loop after installing stock and wiping cache I would try the battery.
Click to expand...
Click to collapse
Thanks sir! I have the same issue! it's working now after replace the battery