Related
Hi all, I have had this bug in varying flavours with both the Wizard and now the Kaiser.
If I make a call via Bluetooth (certain devices only e.g. JVC in car stereo), after the call, all audio is lost on the device when using the speaker, e.g. no ringtones, no TomTom voice guidance. (Oddly the touchtone sounds on the phone dialler continue to work.)
Making another call via Bluetooth works fine and all audio is heard, but not if calling via the earpiece of the phone - all phone audio is still muted. A reboot is required. (Even after a reboot, sometimes all audio is muted, and 2 or 3 reboots are required.)
It is like Bluetooth is 'stealing' the audio from the phone's speaker (which is should), but not giving it back at the end, however turning off Bluetooth doesn't return it.
It happens with WM6.x on the TyTN II.
If you can fix it either via a workaround (reboot the audio service after every call?) or a direct fix (HTC are useless and have not emailed me back), I will pledge you $100 via PayPal. I am sure others will join me in pledging an amount also.
Yes. I've seen the same thing with the last stock Tilt ROM, too.
Same here. But is not happening very often.
The other issue for me is if I have A2DP enable and listening to music, then making a phone call will drop the A2DP connection and I have to reconnect A2DP again. It happens to both my JVC car unit and Sony HBH DS220.
I tried that w/ Dutty's WM6.0 and the latest 6.1 rom
I have the same issue, with bluetooth disconnects.
Just staying on-topic here (you can solve A2DP issues with A2DPToggle a great free app), has anyone found a solution to this Bluetooth loss of speaker audio issue, or a workaround to avoid it happening?
Rebooting the phone after every Bluetooth phone call is hardly what I consider a high-end smartphone to require.
Same here
What Radio's are you guys running? (Ignore my signature for the moment, been phoneless and away from here for a while and just getting back up to date )
Haz
My current radio is 1.64.08.21.
I have also tried 1.64.06.04.
Could we be closer to finding the problem? Does the Radio contain the Bluetooth stack?
Here are all available Radios:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
I'm going to try 1.58.26.20 now. I suggest others try the other 1.5x variants and report back if any of them solve the bug.
Update: I am now offering $100 to anyone who can fix this - see 1st thread.
I have used Windows Mobile since the first ever SPV phone. This one issue is making me look seriously at abandoning that loyalty and getting a Blackberry. If I can fix this for $100 I could be tempted to stay however.
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
What bluetooth headset do you have? Have you tried other headsets or just the one you have? What version of 6.1 are you using?
Thanks, I'll give the audio toggle a go. Might need some help with Mortscript though
I am using the JVC KD-BT1 car stereo with Bluetooth in-car kit. However I can also lose audio on a clean boot even when not in the car, although that is very rare. When using it with the car stereo, it happens after almost every call.
I am running Sleuth's WM6.1 but the other people in this thread are using a variety of BT devices, ROMs, and HTC models.
Can anyone help with how to create a MortScript to run BTAudioOff.exe after each phone call?
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Kraize92 said:
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Click to expand...
Click to collapse
Thanks, I'll try that too.
Rumball said:
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
Click to expand...
Click to collapse
Okay I tried this and before I even got in the car, chose to turn Bluetooth Audio off using the toggle. Since then I cannot recreate the issue! I am not having to toggle after every call, I only did it once and the problem won't come back!
Fingers crossed...
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Kraize92 said:
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Click to expand...
Click to collapse
The issue is there is no audio coming from either the phone or the Bluetooth device. I hear the Bluetooth device disconnect, and its display shows that it has also.
I see no 'Stereo' option to untick for the JVC in its Bluetooth settings, only Hands-free and Wireless Stereo (already unticked).
No progress
Okay, this is seriously getting me down now It all sounded so promising. I have tried the following:
Flashed Niki Radio 1.58.21.23
Tried using Bluetooth Toggle - it seemed to work once when I turned BT off before connecting, but after a reboot the problem is back
Tried a HFP extension PM'd to me (thanks anyway - didn't help)
Made sure Bluetooth Stereo is unticked in the JVC's settings on the phone
I am not sure if the problem is worse when taking a call as TomTom is running.
Here is an interesting development which might help someone narrow down the cause:
I make a few calls, and as always audio is lost, even for phone calls sometimes.
Touchtones on the keypad are the only sound that the phone continues to emit itself. Everything else (TomTom, ringtones, etc.) is dead.
I then go into the JVC's A2DP mode and 'Connect'. The icon appears on the mobile's title bar, and I can hear phone audio through the car stereo.
I 'Disconnect' and the phone's audio is still lost.
What this tells us is that the phone is putting out sound, just not through the speaker.
If someone can write something that will reset the speaker driver after a call, my offer for $100 still stands.
Just to update this, the issue still exists with a clean install of HTC's new 2-May-08 WM6.1 ROM from their website. To***rs!
CJSnet,
Since we got the similar setup w/ exact the same issue (Att Tilt w/ JVC BT-1), I think the problem is basically Kaiser does not switch back to A2DP profile properly after headset profile from phone call. The same issue happens to my Sony HBH DS-220 stereo headset too.
I tried my Eten M600 w/ JVC BT-1 and does not see this problem
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help
After installing WP7 on HD2 I was amazed how good the UI was.
First thing to try was A2Dp and blue tooth phone calls in my car.
A lot of issues disconnecting the A2dp part and not being able to here anything while dialing.
Hm...
I suspected is the HD2 fault.
Then my room mate got a HD7 and it experiences the same issues.
Any Reg fixes?
Would the new update fix that?
Not an issue here, working brilliantly with my sony car stereo for calls and music. Most Android builds I tried had issues with music stuttering but now all is good on WP7
Android was fine with a2dp.
I am using 2 years old clarion blue tooth and sd card only car stereo.
The issues.
The first autoconnect always disconnects after 20 sec to 1 minute.
After that reconnect works.
Long phone calls disconnect a2dp only.
Issue
Tried with samsung SBH500 and also Dell BH200[/B] . Both have issues on calls , but music is excellent .
bryangopan said:
Tried with samsung SBH500 and also Dell BH200[/B] . Both have issues on calls , but music is excellent .
Click to expand...
Click to collapse
Music works. Video does not from podcast.
But the quality is awful
I can also confirm that A2DP cuts out after 20-60 sec, reconnect works fine.
I am using the Volkwagen stock head unit (the RCD-510)
Any fixes, ideas?
Connect and disconnect and reconnect it is fine.
no problem here im afraid
I have a problem with my unrooted Xperia Z with a locked bootloader. My main speaker does not work for any media like music games or videos, but works fine for loudspeaker calls. Also the earpiece speaker doesnt work at all. Another problem i found was that my microphone would not work at all unless it was in a call and i was using loudspeaker. The final problem is that when ever i plug in my earphones, google now pops up and sometimes my phone starts playing music automatically throught the earphones, when i remove the earphones, instea of stopping the music continues but the speakers dont work so it just keeps playing them silently. If anyone knows the soultion to this, please respond as ive searched everywhere and i have not found one solution yet.
UPDATE: i used the application soundabout to reroute the audio and the calls are now fine, the only problem is that when i plug in my earphones the google now problem persists. If i plug in earphones with a mic, i dont get any of these problems and everytime i want to use my internal speaker for media, i have to manually re-route the audio to them. Anybody know a solution to these 2 problems?
I do have the exact same problem, I tried different ROMs and Audio Mods (at the moment I've got a stock ROM) without any change.
Did you somehow fix it?
Exact same problem, i run stock android 5.1.1 build 10.7.A.0.222 locked boot loader. Problem suddenly came up last week during vacation, quite some time after I did OTA upgrade to 5.1.1 - so this is not related to ROM updates.
After installing soundabout (thanks for the hint) the rerouting did not work immediately - i had to set phone to earpiece and media to speaker in the app and reboot for it have an effect.
I think the root cause is, the phone thinks there are headphones connected, when there really aren't. If I use the UKW radio app, it starts and shows headphones as output-icon right away - it should actually complain that there is no reception without phones because the antenna (headphone cable) is missing. Since it doesn't complain I guess that's the culprit.
Any hints how to fix that, without using a rerouting app? (kinda stupid, using bluetooth speakers and so on now needs a manual setting change in soundabout).
I have that phone for more than 2 years now and used headphones maybe twice with it, so a busted headphone-jack is out of the question too.
Guys give it a try.
Thanks Ess Arr, that really works!
Hi Team,
I installed the ROM update to B853 on my P7 and my Jabra stealth stopped working. It is connecting OK but I cannot hear the caller. I have tested the device with other phones and it is working OK. The Jabra stealth was working when I was on B830. Has anyone experienced this. How can I resolve the issue?
Thanks,
Kabuti
Kabuti said:
Hi Team,
I installed the ROM update to B853 on my P7 and my Jabra stealth stopped working. It is connecting OK but I cannot hear the caller. I have tested the device with other phones and it is working OK. The Jabra stealth was working when I was on B830. Has anyone experienced this. How can I resolve the issue?
Thanks,
Kabuti
Click to expand...
Click to collapse
Hi! Have you tried to use another bluetooth headset in your phone?
Reyse said:
Hi! Have you tried to use another Bluetooth headset in your phone?
Click to expand...
Click to collapse
I Tested another Bluetooth headset and the result is the same. The caller can hear me but I cannot hear the caller. This is pointing to the B853 update. Assistenace will be appreciated.
Thanks,
Kabuti
I've the same problem with the car's bluetooth.
I have same problem past year from the beginning I have P7. Actually this is first time I came across same problem through internet.
Not exactly sure what version was phone originally since that still same with B609 and now B852. I was hoping to improve through updates but with no change. Since this thread I was getting to conclude that this is mechanical problem of my device (girlfriend has P7 from another distribution with no problem).
Testing let me know that it is only related to hearing caller. Streaming audio and others sound related bluetooth services works fine. Met this with various headsets headphones and cars. Still same at one time of ten works fine than nothing with no clue on repetition or pattern.
If we can gather more details may be this worth while to post to Huawei
Any solutions for this problem until now?
I have the same bluetooth issue on Huawei P7 (B852). The issue first appeared with upgrading to Lollipop. Before everything was fine.
Now - as CADAC described above - bluetooth connection seems fine: audio streaming, sync with fitness tracker - everything is ok.
But regarding phone calls I can't here the caller, I even can't here it ringing if I call somebody.
After factory reset / wipe data it first seemed ok, but after a second phone call the problem was there again. I've tested on my car (Mercedes A-Class, Audio 20 System of September 2015) and also with a regular bluetooth headset.
Yesterday I've installed the app "Bluetooth Auto Connect" --> https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=de
Just a little configuration inside the app.
It is currently working!!!! Until now ... Let's see for how long.
Anyone else with this bluetooth audio issue who can share experiences???
UPDATE: The no-audio-issue is back again. Bluetooth Auto Connect doesn't resolve the issue!
Fix Bluetooth Audio - For Calling or Answering Via HandsFree
This is the solution:
https://forum.xda-developers.com/showpost.php?p=71527189&postcount=4
Click to expand...
Click to collapse
Google Now is not the problem as I do not have it installed and still cannot call or answer hands free on the P7. Blue Tooth Auto Connect doesn't solve it either.
Julian