Green LED and brick Moto X xt1058 - Moto X Q&A

Hi guys, I made my Moto X hard brick different this time, had the android 5.1.1 installed by official update, but was having trouble, I tried to reinstall the android 5.0 obviously had problems with gpt_bin to be a more current version. I could solve the problem by placing the gpt_bin android 5.1.1 Nextel in rom android 5.0 I own after I update it again for the OTA update, putting the update file on the device's internal memory as it had done in the dowload PC and did not want to download again. He began updating normally, then had black screen and not called again. Dont charging, does not come into fastboot, the computer does not detect as Qualcomm drive. He led a green as I plug in the charger, so does when connected to the computer, the LED is lit for a few second and a off, windows recognizes it and disconnects in seconds. I do not know what to do, I could already solve the hard brick when computer aindao recognized as Qualcommm driver before, but this time is different.
My problem is the same as this guy: http://forum.xda-developers.com/moto-x/moto-x-qa/moto-x-doesnt-power-green-led-charging-t3109905
I hope you can help me, excuse me for english

Related

Help recover a lumia 720 if poss please

its been one of those nights !!
My trusty old lumia 720 is on o2 Uk and Cyan became available today
currently the phone was running 8.1 dp but not update 1
as is the way the phone would not dl Cyan as 8.1 dp is blocked from recieving Cyan
tried to downgrade to 8.0 with NSRT but the software would not write to the Rom
reinstalled pc NSRT , ran the software and at 1% write, the process failed !!
NSRT as usual says power and vol down and click ok to recover on Pc
tried everything but the phone is now un responsive, appearing dead
no matter what i cannot get a flicker from it
my guess is the write process over wrote the start of the rom enough to stop a boot
i have had a dable with the NCS software but i am missing the top option ?? which is shown in the walkthrough
can any of you guys throw any light on or IF the phone is recoverable at all ??
It is very simple method dude.
1st install latest NSRT(WP8.1 compatible) with required drivers & tools.
Check your phone driver also Boot Manager driver sometimes it fails. check your .ffu online, download & write.
lumiamike said:
its been one of those nights !!
My trusty old lumia 720 is on o2 Uk and Cyan became available today
currently the phone was running 8.1 dp but not update 1
as is the way the phone would not dl Cyan as 8.1 dp is blocked from recieving Cyan
tried to downgrade to 8.0 with NSRT but the software would not write to the Rom
reinstalled pc NSRT , ran the software and at 1% write, the process failed !!
NSRT as usual says power and vol down and click ok to recover on Pc
tried everything but the phone is now un responsive, appearing dead
no matter what i cannot get a flicker from it
my guess is the write process over wrote the start of the rom enough to stop a boot
i have had a dable with the NCS software but i am missing the top option ?? which is shown in the walkthrough
can any of you guys throw any light on or IF the phone is recoverable at all ??
Click to expand...
Click to collapse
The Nokia Software Recovery Tool is a funny thing. I've been using it a lot the last few days, and I've had lots of problems. I used it on a 1520. The USB recognizes the phone and when it restarts to install the software the PC doesn't recognize the phone. That happens on ONE of my two USB drives.
When I used it with my 1020, the NSRT didn't even recognize the phone. The PC did because it opened up the WP app automatically but NSRT said "Please Connect Phone" still.
All of these problems were solved by simply using a different PC and that is my advice to you. If that doesn't work, take it into a Microsoft Store.

[Q] Moto X Brick not even "QHSUSB_DLOAD"

Hello Guys,
i bought a bricked Moto X and now trying to bring it back to life.
I can´t turn it on.
I don´t get into fastboot.
PC recognizes nothing when I plug in the device, not even the "QHSUSB_DLOAD" thing in the device manager.
Only the green led turns on, when I insert the charger.
The seller told me, that the device bricked while trying to downgrade from LP to KK.
Is there any hope to rescue the Moto X?
Thanks!
Have you tried?
http://forum.xda-developers.com/showpost.php?p=60224688
Thank you for the link.
that won´t be easy. I never opend a device

Bricked XT1068 after failed OTA

I recently tried to install a lot of ROMs, with few success because I'm a beginner at this kind of things. I still managed to reinstall completely a stock KitKat version, and tried to do the OTA update to Lollipop. The screen turned down when the update reached approximately 60% and I can't even restart the phone in bootloader to restore with adb since. Can someone help me or is it helpless?
Same here.
I have a xt1068 and I was on MM, but after found that gps was not working properly, decided to downgrade to Lollipop.
The downgrade worked fine, but then came the OTA stagefright update notification and I tried to install it.
It was on the recovery screen, in the middle of the update, it suddenly blacked out and made no response to charging ou power button. I cant make it into bootloader, nothing. Dead.
Help!
same thing happened to me
So sad
Same here. I tried following some tutorials on bricked phones, but my pc won't even recognize the device as they say it should. Can someone help us? I'm about to go out and go to a technical support store, but I'd like to try on my own first... Someone there to help me?
http://forum.xda-developers.com/showthread.php?t=3345416

software for working on a rooted android from the computer

Old man with bad eyes. Any software out there for working from the computer on a rooted phone? That little phone screen is hard to see.
I am having problems with odin appears to have stopped working and also my phone at secure checkfail recovery. any moderators help? what do I do?

SM-T818V USB will only charge

Hi, I have a Verizon Tab S2 9.7 that seems to be having a major USB malfunction... No matter what USB setting I use (mtp,ptp,randis,midi,ext) when i plug in my device to a computer (i have tried 3 diff comps) the computer will not even register anything connected to it. the device will charge no problem but no matter what drivers i have installed or what cable i use it will not show up. It also does not show anything in download (odin) mode, or recovery so i can not even re-flash the stock firmware to try to fix it that way. i asked Verizon if they could get me an update.zip of their latest firmware ota update and was told there was nothing they could do. So I am left in a bind as if anything goes wrong with the tablet other than not being able to transfer files, there is nothing i can do to repair it. It has never been rooted and is on the latest firmware release for its model with a locked bootloader. Im not sure what to do or what my next step should be. I am attempting to root it using kingroot but no luck as i expected. thought it would be a lot easier to fix with root but with the locked bootloader im out of options. Any help is appreciated as this is my main tablet which i use for everything. thank you in advance.

Categories

Resources