Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 9 to the Nexus S, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 9?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: V7 patch 0 (from v6.x to v7.x should be no need to make a clean install)
Download: link
Download: link Mirror
Download: No torrent already ( )
Download: link mirror ( by korumera Thanks )
MD5sum: bb2dc9139a90d5096afcb0aeefc9b48f
Night Builds can be found here: http://get.cm/?device=crespo ChangeLog: http://cm-nightlies.appspot.com/?device=crespo
Click to expand...
Click to collapse
Old Version: V6 patch 0
Download: link
REMEMBER TO INSTALL GAPPS ALWAYS AFTER INSTALL AND UPDATED ROM.
For those who want to install faceunlock read this: https://plus.google.com/u/0/111722836277981844223/posts/2LthtkGD8aY
TO MAKE A CLEAN INSTALL. LOOK HERE
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
Take a look for those willing to restore bootanimation. That is the new bottanimation posted here ( sorry one of the users posted but not remember the nick "message me" ) and I added to recover for those who have selected no boot animation on previous versions: http://goo-inside.me/devs/kalimochoaz/Others/CM_Animation.zip flash it from recovery
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
CHANGELOG
For those who preffer to continue on alfa 13, here is an update ( alfa 14 ) Alfa 14 can be installed over alfa 13 without clean
ROM: http://bit.ly/CM9Alfa14
GAPPS: http://download.clockworkmod.com/test/gapps-ics-20111128.zip
Those files are not compatible with Alfa 15 and up
Click to expand...
Click to collapse
NEW on alfa 14:
Notification LED issue solved.
Updated code
Updated T9
Voodoo color changes to v1
NEW ON ALFA 15:
Kernel 3.0.8
LED notification is on
T9 in call patched from alfa 13
LED Keys not turning ON when screen is off and you touch the screen
NEW ON ALFA 16:
Added voodoo color control
Updated code for some issues
NEW ON ALFA 17:
Added voodoo sound control
Added MusicFx
Updated code for some issues
Superuser corrected, now works without issues
[...]
NEW ON ALFA 18:
Overclock kernel ( use setcpu )
Removed MusicFX since there is DSPManager
System updated. Advanced users can now use compcache
[...]
NEW ON ALFA 20:
Overclock kernel up to 1400 ( use setcpu )
Removed software egl for now until we find a reason on why is here.
Added DeepIDLE ( Thanks to Ezekeel ) also some other kernel changes.
Added Touch to focus on camera. Now if you touch the screen it will make a previous focus.
[...]
NEW ON ALFA 20.p1:
Readded Trebuchet
NEW ON v1:
Code updated to CM
Review kernel code to make stable
Upgraded kernel to 3.0.17
No more flickering on turn on/off
Added all sound options to DSPManager. ( voodoo app is not compatible, use the options in device settings to control colors and options in dsp manager under wm8994 to control sound )
Added zram option.
Optimized for battery life and speed.
NEW ON v1.1:
Default RGB gamma set to 0 ( choose the best gamma you want at device settings )
NEW ON v2.0:
More kernel upgrades
code updated
Added some overclock patches for stability
New music app
Added New settings
Added new governor lulzactive. I suggest you to use this one for depending the use of your phone.
New Settings icons
No more flickering on turn on/off the screen
Modified kernel for kms
lulzactive as default governor with some tweaks.
Added setting to control kms ( settings/ performance / memory ) You will win memory on your devices
Default values for ksm set to reduce cpu usage
more system updates
New option to control lulzactive governor. Look on Settings/advanced
Reapaired error at multiplier colors
Cleaned the code at device options
Added Torch working app
Voodoo wm8994 DSP corrected into DSPManager to avoid sporadic FCs
NEW ON v3.0:
Added Torch, now with widget ( widget for the screens, not for the drawer app )
Added option to camera to take photos by pressing power button
Updated Code to 20.02.2012
Added code to display %battery
Removed Lulzactive
Solved the caller app issue ( after some calls you received and FC on number pressing on old releases )
Updated kernel 3.0.21 & new kernel speeds
Changed various settings
NEW ON v3.3:
Added new bootanimation
Added turn on with volume
Solved some DSP 8994 issues settings
Updated kernel 3.0.22
Changed various settings
NEW ON v3.4:
Corrected bootanimation size
NEW ON v4.0:
New kernel 3.0.25
Updated code to 22.03.2012
NEW ON v5.0:
New kernel 3.0.27
Updated code to 05.04.2012
Kernel and code based on 4.0.4
NEW ON v6.0:
Deep idle is now stable, at least on our tests.
Gamma hack is new, a new idea with great colors Check the CM preset button on gamma hack and on multipliers.
More battery time.
Code updated
...
NEW ON v7.0:
Deep idle is now tested and stable.
Ne preset screen with gama/multipliers combinations (thanks to ale.landra91 cpaixao and malycomix.
More battery time.
Freq issues solved on deepidle
Better 1.2GHz OC stability reached
...
Q/A Post
Q/A:
I have an extrange green color at boot and when I have automatic brightness setted, what can I do:
Go to crespo setting and change in gamma the values: ( by default values on google are 0,0,0 but I suggest you to explore the best you like) for me is:
RED: 50
GREEN: 46
BLUE: 46
How can I do to make a clean install?
Read that post http://forum.xda-developers.com/showpost.php?p=20485148&postcount=146
I have 2 times gallery app repeated and is buggy:
Install again gapps. This happens because you updated and no installed gapps after installing.
I need to go root with adb, but it doesn't work:
adb root
After you can type "adb remount" or simply "adb shell" and you are root.
How can I do to enable KSM?:
Settings -> performance -> Memory Management -> Kernel Samepage merging ( KSM )
Changelog
ALPHA 15:
Kernel 3.0.8
LED notification is on
T9 in call patched from ALPHA 13
LED Keys not turning ON when screen is off and you touch the screen
4G working - 4g power widget included
MMS receive working
ALPHA 16:
Kernel - Voodoo Color Control
SuperUser - Updated for ICS
Questions
Please do a complete wipe/clean prior to installation, even if currently running an ICS ROM. Many changes between builds prior to 4.0.3 and this build.
Cleaning
Wipe Data/Factory Reset
Wipe Cache Partition
Mounts and Storage -> Format /system
Mounts and Storage -> Format /boot
Advanced -> Wipe Dalvik Cache
Launcher is Laggy
From home screen -> Preferences
Drawer -> Uncheck "Join with Apps"
Thanks...; p
Inviato dal mio Nexus S usando Tapatalk
Thanks a lot! Will try!
Thanks, been waiting foe this all weekend
Sent from my Nexus S using xda premium
At last..along waited..lol
Sent from my Nexus S
Thank you!!!!!
Hot diggity!
Edit: Higher speed mirror:
Alpha 15
ROM: Links removed. Deprecated.
Gapps: Links removed. Deprecated.
Gapps v2: Links removed. Deprecated.
Another Mirror on page three. Enjoy.
downloading now!
Sent from my Nexus S 4G using XDA App
Thank you very much sir. Downloading now
[oICSv36] - [3.0.8GLaDOS-CFS-v2.0]
i assume the rom is fully rooted?
renna1992 said:
i assume the rom is fully rooted?
Click to expand...
Click to collapse
Of course.
Sweet..downloading also ya boyeee
Sent from my Nexus S 4G using xda premium
Thanks for your work!
Sent from my Nexus S 4G using xda premium
If anyone can't access multiupload or would like a high-speed mirror, let me know.
will you add this to rom manager?
Sent from my Nexus S
sixstringsg said:
If anyone can't access multiupload or would like a high-speed mirror, let me know.
Click to expand...
Click to collapse
Please ..................
[ROM] 24 Dec [Aroma] [P6810 / P6800] Multi-Language & Multi-Window JB 4.1.2 | SkyHigh [v3.5]
FOR : P6810 WIFI - P6800 GSM/3G - P6810 WIFI (re-partitioned)
TABLET UI IS UNSUPPORTED - READ POST #4 FOR HOW TO. TABLET & DPI RELATED QUESTIONS / ISSUES (UNRELATED TO THIS BUILD) DON'T BELONG HERE. THANKS
Click to expand...
Click to collapse
TO BE 100% CLEAR : NO FULL WIPE OPTION = NO POSTING IN THREAD = NO BUG REPORTING or SUPPORT. THANKS FOR YOUR UNDERSTANDING
Click to expand...
Click to collapse
* I am not the original creator of eRobot ROM, but have been kindly given permission to mod this ROM and release here at XDA. THANKS eRobot ! Check my change-logs in Post #3
* eRobot website & changelogs here :
http://erobotrom.blogspot.com/2013/06/erobot-jbtb-rom-for-galaxy-tab-77-v2p.html
* Original eRobot XDA thread here :
http://forum.xda-developers.com/showthread.php?t=2276509
SCREENSHOTS :
HOME & APPS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MULTI-WINDOW
FLOATING APPS
TOGGLES
FEATURES :
✔ eRobot v2.3P Base
✔ Android JB 4.1.2
✔ Tablet "feel" - Phablet UI @ 213 DPI
TABLET UI IS UNSUPPORTED - READ POST #4 FOR HOW TO. TABLET & DPI RELATED QUESTIONS / ISSUES (UNRELATED TO THIS BUILD) DON'T BELONG HERE. THANKS
Click to expand...
Click to collapse
✔ Root
✔ SuperSU 1.75
✔ SU binary 1.73
✔ Busybox v1.20.2-linusyang and 281applets
✔ Zipaligned
✔ Extended reboot menu with ScreenShot
✔ MULTI-WINDOW & FLOATING APPS v5 [THEDEVIOUS1] (Info in Post #4)
✔ INTERNATIONAL MULTI-LANGUAGE (Info in Post #4)
✔ Init.d script support without the need for a custom kernel
✔ Patched services.jar for reduced launcher re-draw & better OOM groupings
✔ UMS (USB) Mass Storage Mode : Device Settings > SkyHigh Addons (Info in Post #4)
✔ lidroid 23 toggle status bar mod (work-in-progress) : Device Settings > SkyHigh Addons
✔ TW CSC features controller : Device Settings > SkyHigh Addons ("TW Settings CSC Features" not yet implemented)
✔ Volume rocker mod - long press skips tracks with screen OFF
✔ Unplugging From USB doesn't turn screen on
✔ Glow effect when pressing stock status bar toggles
✔ CRT screen off animation for supported kernel
✔ OG Battery Mod :
Device Settings > Display > Battery Style
Choice of 15 battery styles
Change style without re-boot !
✔ Aroma Installer v2.70RC2: "Personalize" your ROM with some optional, mods, tweaks etc
✔ Aroma Wipe options
✔ Aroma Bloatware options
✔ Aroma Performance Tweak options :
EXT4 tweaks
Zipalign - archive alignment on boot once every week
SQLite - defrag & re-index app databases on boot once every week
RAM Management - improved memory management ADJ & minfree values from V6SuperCharger
fstrim lagfix - on/60 sec after boot
✔ Aroma build.prop Tweak options :
Frees up more ram when needed
Increase wifi scan to 3 mins
Faster scrolling
Save power when in sleep mode
3G TurboCharger Enhancement! - optimize WIFI & data speed
Increase overall touch responsiveness
Use dalvik JIT compiler
Deeper sleep when on standby
Raise photo & video quality
Raise JPG quality to 100%
Enable USB debugging
Disable waking up with volume rocker
Disable black screen issue after call
Faster ring when dialling out
Increase the volume steps in-call (7 to 20)
Disable bootanimation
Disable logcat
Disable kernel error checking
Disable extended dalvik jni checking
Disable sending usage data
Disable Google Report service
✔ Aroma Framework Tweaks & Other Mods options :
Sony Mobile Bravia Engine 2 (placebo or not)
Viper4Android Audio Mod
✔ Aroma Apps options :
Google 4.4 email client & exchange - removes stock JB email during install
Multi-window Manager - ESSENTIAL - make any app multi window capable
Titanium Backup free version - backup ALL apps, Market links, remove bloatware & MORE!
Root Explorer free version - root type file explorer
TubeMate - Download, save & playback YouTube content
Xposed Framework - install modules & modify your ROM without having to modify any apk
Tablet UI Module - Change from Phablet to Tablet UI
App Settings Module
Apex Launcher - Custom launcher required for Tablet UI module - TW will crash
XQuick Settings Toggles Themer
✔ Aroma lidroid 23 Toggles Theme options :
3D blue
3D green
3D grey
TO DO :
Any mods and tweaks that may be of benefit to my P6810 device
If you wish to have other options, please do some research and gather the required info for me. I might then attempt it. Sorry, my time is limited.
Fix a few bugs
Remove superfluous P6800 apps for P6810 ROM - flashable zip is provided in Download section
CREDITS : links will come later, still adding to list
eRobot !! - permission to use eRobot as base ROM
bodivas - P6800 ROM port to P6810 leading the way
zeppelinrox - Ultimate Jar Power Tools & V6SuperCharger
Chainfire - Root
Linus Yang - BusyBox v1.20.2 and 281applets
OsamaGhareeb - OGBatteryMod
ViPER520 & zhuhang - ViPER4Android & [APP] Official ViPER4Android Audio Effects (FX v2.3.1.3)
THEDEVIOUS1 - Multi-Window Mod
amarullz - AROMA Installer
dr.ketan - 3D toggles for lidroid status bar
XDA & dev host - hosting the forums & files
All others who have directly & indirectly contributed - THANKS
.
Installation
HOW TO INSTALL :
DISCLAIMER :
Flash this ROM and its mods/tweaks at your own risk. However unlikely, YOU are solely responsible for any potential damage to your device or data. Do not flash unless you know what you are doing, are capable of reading, following instructions and using ADB or Odin to help recovery of a soft brick.
P6810 WIFI DEVICE (BODIVAS ROM BASE) REQUIRED TO USE TWRP P6810 2.6.0.0
Have bodivas P6800 JB 4.1.2 ROM base installed
[ROM][GT-P6810][JB 4.1.2][ODIN][Stock Rooted MD3]
Installed P6810 custom Recovery such as TWRP or CWM (I use and test with TWRP P6810 2.6.0.0 without issues - 2.6.3.0 may not mount preload to wipe)
Backup User apps and data with Titanium Backup Pro app or other method
Save ROM to internal or extSdCard
Boot into custom Recovery
FULL NANDROID BACKUP to extSdCard & KEEP COPY ON PC !!
Flash ROM, select FULL WIPE and other options and reboot
Be patient, first boot will take a while !
Initial setup & allow ROM to 'bed in' for at least 5 mins
Reboot if you have a black wallpaper or issues
After reboot, finish setup & check install “unknown apps” in phone settings
Restore User apps and data from Titanium, Wi-Fi settings etc (GREEN & YELLOW normally OK if same ROM base)
DO NOT restore any SYSTEM apps or data in RED colour with Titanium Backup
Reboot, flash CWM_P6810_JB_Telephony_Apps_Remover_V2.zip
Reboot, setup accounts
P6810 WIFI DEVICE (RE-PARTITONED) REQUIRED TO USE TWRP P6800 2.6.1.0
P6810 - Have your device repartitoned and P6800 JB 4.1.2 ROM base installed using my Guide :
[GUIDE] Flash Official JB 4.1.2 Firmware on P6810 Wi-Fi Device
Installed P6800 custom Recovery such as TWRP or CWM (I use and test with TWRP P6800 2.6.1.0 without issues - 2.6.3.0 may not mount preload to wipe)
Backup User apps and data with Titanium Backup Pro app or other method
Save ROM to internal or extSdCard
Boot into custom Recovery
FULL NANDROID BACKUP to extSdCard & KEEP COPY ON PC !!
Flash ROM, select FULL WIPE and other options and reboot
Be patient, first boot will take a while !
Initial setup & allow ROM to 'bed in' for at least 5 mins
Reboot if you have a black wallpaper or issues
After reboot, finish setup & check install “unknown apps” in phone settings
Restore User apps and data from Titanium, Wi-Fi settings etc (GREEN & YELLOW normally OK if same ROM base)
DO NOT restore any SYSTEM apps or data in RED colour with Titanium Backup
Reboot, and flash CWM_P6810_JB_RE-PARTITION_Telephony_Apps_Remover_V2.zip
Reboot, setup accounts
P6800 GSM/3G DEVICE REQUIRED TO USE TWRP P6800 2.6.1.0
Have P6800 JB 4.1.2 ROM base installed
Installed P6800 custom Recovery such as TWRP or CWM (I use and test with TWRP P6800 2.6.1.0 without issues - 2.6.3.0 may not mount preload to wipe)
Backup User apps and data with Titanium Backup Pro app or other method
Save ROM to internal or extSdCard
Boot into custom Recovery
FULL NANDROID BACKUP to extSdCard & KEEP COPY ON PC !!
Flash ROM, select FULL WIPE and other options and reboot
Be patient, first boot will take a while !
Initial setup & allow ROM to 'bed in' for at least 5 mins
Reboot if you have a black wallpaper or issues
After reboot, finish setup & check install “unknown apps” in phone settings
Restore User apps and data from Titanium, Wi-Fi settings etc (GREEN & YELLOW normally OK if same ROM base)
DO NOT restore any SYSTEM apps or data in RED colour with Titanium Backup
Reboot, setup accounts
BUGS
All inherent bugs from eRobot v2.3P
S Planner FC when select app settings > Fix here >> Post #333
Black wallpaper after first boot, just reboot device (Installation step #10 )
Some Device > Settings > Menu features are not implemented or applicable for our device
Adding shortcuts to Lockscreen will FC
ISSUES?
* If you experience any issues with the ROM - FULL WIPE from TWRP before flash AND...
This will wipe your data
Reboot into TWRP recovery
Select wipe - advanced
Check - system, data, cache, dalvik cache & preload
Reflash ROM with FULL wipe option in Aroma
Check without restoring anything, best to install everything fresh so YOU can de-bug
Please read the original eRobot & Multi-window threads and search before posting any bugs etc.
I don’t have the time to help posts in this thread unrelated to the ROM and if you have not followed any of the above instructions!
.
Change-log & Download
CHANGE-LOG
SkyHigh v3.0 → SkyHigh v3.5
* Disabled :
- Signature checks on system apps
- Scrolling cache across OS (some potential scrolling improvements)* Added:
- TW CSC features controller - selectable in device settings > SkyHigh Addons ("TW Settings CSC Features" not yet implemented)
- Ported lidroid 23 toggles status bar - selectable in device settings > SkyHigh Addons (Work-In-Progress!)
- Choice of 4 themed lidroid 3D toggle icons as Aroma optional during install
- Unplugging From USB doesn't turn screen on
- Volume rocker mod - long press skips tracks with screen off
- Glow effect when pressing status bar toggles
- Xposed module XQuick Settings Toggles Themer
- Google 4.4 email client & exchange as Aroma option - removes stock JB email during install (thanks ColBill & Android Police)
- Zipalign code change & set on boot once every week
- SQLite - defrag & re-index app databases on boot once every week
- RAM Management - improved memory management ADJ & minfree values from V6SuperCharger
* Fixed :
- Device Settings > Lockscreen > Lockscreen options > FC. Reverted settings menus to include unneeded S-Pen & Motion for now
- Apps copied to /data/local are no longer (caused by old zipalign code on boot)* Updated :
- Xposed module to 2.4.1
- Xposed Apps Settings Module to 1.7.1* Removed :
- CRT effect removed from Aroma options - ALWAYS ON if using a compatible kernel
- Test script from init.d folder - we know it works now* Modified :
- lagfix script run time from sleep 30 to 60 sec at boot time. Should boot faster but laggy for a few seconds while trimming. SkyHigh kernel (if installed), will still over-write this until I bother to update it)
SkyHigh v2.5 → SkyHigh v3.0
* Added:
- System INTERNATIONAL MULTI-LANGUAGE (Info in Post #4)
- UMS (USB) Mass Storage Mode app & control from device > settings > SkyHigh Addons
- Xposed App Settings Module optional
- Kies Aroma optional* In-built the OGBatteryMod - Removed from Aroma options
* Removed:
- PhotoSphere FC - causing grief
- sPen & ink effect from main device settings menu (still needs work)* Replaced
- TabletJobManager.apk from Note 8.0
- Power menu "Screenshot" icon with a more aesthetic image* Moved various system apps to preload to make some space
SkyHigh v2.0 → SkyHigh v2.5
* Fixed:
- Camera, Gallery, Music Player & Video Player not installed or FC* Added:
- PhotoSphere camera & gallery (Google Edition SGS4)
- Xposed Tablet UI Module
- Apex Launcher (needed for Tablet UI – TW will crash)* Optional Apps moved to /data partition for ease of removal (Factory reset will also do this). This does not include Bloatware etc.
* Some other cleanups in ROM & Aroma
SkyHigh v1.0 → SkyHigh v2.0
* MULTI-WINDOW MOD v5 by [email protected]
* Some eRobot tweaks are missing due to multi-window implementation (ie screenshot & ink effect)
* Removed "Mobile Data" and added "Screenshot" to Power menu
* Added "eRobot SkyHigh Edition" to settings/about device
* Updated BusyBox v1.20.2-linusyang and 281applets
* Re-patched services.jar for reduced launcher redraw & improved OOM groupings
* Re-add OG Battery Mod (15 battery styles - change without reboot)
* Re-add CRT off effect for supported kernels
* Added Viper4Android Audio Mod
* Added TubeMate, Xposed, Titanium, Rootexplorer, Multi-window manager
* De-bloat Aroma options
* Removed stock Video Player app (force close) - for now, try MX Player from Google Play
eRobot v2.3P → SkyHigh v1.0
* Implemented Aroma v2.70RC2 and optional:
Wipes
Removed the few build.prop tweaks from /system/build.prop and added many optional build.prop tweaks
Performance tweaks
- Ext4 tweaks
- fstrim lagfix on boot
- removed zipalign binary from /system/xbin (does nothing without script!) and make optional zipalign on boot
Mods
- CRT TV off animation for supported kernels
- OG Battery Mod - change 15 different battery styles without reboot
- Removed Sony Bravia Engine 2 and made optional
Stock kernel (P6810 is re-packed)
Modem (for P6800)
* Updated Superuser to SuperSu 1.75
* Updated su binary to 1.73
* Removed CPU Spy app
* Moved rootexplorer app from system to data/app folder
* Added Titanium Backup app (free) to data/app folder
* Patched services.jar for reduced launcher re-draw (die-hard) and better OOM groupings
* Fixed init.d support
DOWNLOAD
** FLASH THE CORRECT ROM !! READ INSTALLATION INSTRUCTIONS IN POST #2 **
P6810 WIFI DEVICE WITH BODIVAS ROM BASE
REQUIRED TO USE TWRP P6810 2.6.0.0
ROM v3.5
P6810 WIFI ONLY > CWM_P6810_JB_Telephony_Apps_Remover_V2.zip
P6800 GSM/3G & P6810 WIFI (WITH REPARTITION)
REQUIRED TO USE TWRP P6800 2.6.1.0
ROM v3.5
P6810 WIFI RE-PARTITION ONLY > CWM_P6810_JB_RE-PARTITION_Telephony_Apps_Remover_V2.zip
.
Additional Information & FAQ
ADDITIONAL INFORMATION & FAQ
WILL I SUPPORT THE TABLET UI ?
NO. I don't intend to be using this tab for much longer, will be going to my 9yo boy. I prefer Tablet UI too, but he prefers the Phablet. Sorry I, don't have more time for anything else unfortunately.
Click to expand...
Click to collapse
* TouchWiz Tablet UI Method: Post #176
* Custom Launcher Method: Post #118 & Post #126
ROM WIPE OPTIONS
* TO BE 100% CLEAR : NO FULL WIPE OPTION = NO POSTING IN THREAD = NO BUG REPORTING or SUPPORT
* Full wipe install :
system
preload
cache
dalvik-cache
data - EXCEPT your data/media folder (internal & external sdcard contents are safe)
* Dirty wipe install :
cache
dalvik-cache
TW CSC FEATURES - WHY DOESN'T MY HOME SCREENS LOOP?
*
Enable in Device Settings > SkyHigh Addons > ROM CSC features controller
Click to expand...
Click to collapse
SUPPORTED SYSTEM LANGUAGES
*
International multi-language
Click to expand...
Click to collapse
MORE SUPPORTED SYSTEM LANGUAGES
*
TRY THIS APP : [APP][Language Enabler] Enable all hidden languages on a Rooted Samsung Roms
Click to expand...
Click to collapse
SUPPORTED KEYBOARD LANGUAGES
*
International multi-language
Click to expand...
Click to collapse
SUPPORTED CUSTOM KERNELS
P6810 WIFI (BODVIVAS BASE)
* [KERNEL] [P6810 JB 4.1.2] [13 Nov] ROOT | exFAT | SkyHigh Kernel [1.6.0]
* [ROM][GT-P6810][JB 4.1.2][ODIN][Stock Rooted MD3]
P6800 GSM/3G & P6810 (RE-PARTITION)
* [KERNEL] [P6800 JB 4.1.2] [13 Nov] ROOT | exFAT | SkyHigh Kernel [3.9.1]
MULTI-WINDOW & FLOATING WINDOWS
MULTI-WINDOWS :
Tap the bottom right hand side screen button
Choose your layout
Drag & drop selected apps into screen
FLOATING APPS :
Tap the "pin" in the opened app top left hand corner
Drag the app anywhere by holding the app status bar and moving it where you want
You can float multiple apps at a time
HOW TO CHANGE TOGGLES
Device Settings / Display / General / Notification panel
Tap & hold toggle
Drag & drop to re-arrange to your liking
UMS (USB) MASS STORAGE MODE
.
Can't wait to try this one out.
••••• | Sent from GT-P6800 using Tapatalk Pro | •••••
Fulaeetoy said:
Can't wait to try this one out.
••••• | Sent from GT-P6800 using Tapatalk Pro | •••••
Click to expand...
Click to collapse
Still uploading.......
Trying to get the OP etc up and running. All takes time
Will just continually add to it to get it clear & acceptable.
Hi, does this come with multi-language support? It would be great if it comes with Chinese support. Thanks.
jchenny said:
Hi, does this come with multi-language support? It would be great if it comes with Chinese support. Thanks.
Click to expand...
Click to collapse
It appears so, but then I can't read chinese or korean etc.
Answer is in Post #4
v1.0
v1.0 ROMs have uploaded !
Read all Post #1-4 before proceeding !!
.
Thank you very much UITA for your efforts in bringing a new options for our 7.7 tablets...
I have been using my 6800 tablet with 'eRobot JB TB ROM V.1 DXMD3 Android 4.1.2' and its int lang pack (including Türkish) v1.1 plus with your Skyhigh kernels now with 3.9.1.
I have to tell that I am very very happy with all.. Now, I want to go with this Rom as I have full confident to you and your developments....
Although I wanted to try with eRobot v2.3p in the past but I could not, as I did not get clarified if it supports İnt languages including Turkish..
Please allow and help me two find out two things;
-if Türkish lang is supported? (Changedlog in erobots blog does not have this info)
-if it can be flashed onto eRobots modified version 1.x mentioned above?
Ths in advance...
Cannot thank you enough for giving us more options for our beloved 7.7
One question before I give this a shot; dies this fully wipe the device like the previous eRobot ROM?
Sent from my GT-P6800 using xda app-developers app
sas_sas said:
Thank you very much UITA for your efforts in bringing a new options for our 7.7 tablets...
I have been using my 6800 tablet with 'eRobot JB TB ROM V.1 DXMD3 Android 4.1.2' and its int lang pack (including Türkish) v1.1 plus with your Skyhigh kernels now with 3.9.1.
I have to tell that I am very very happy with all.. Now, I want to go with this Rom as I have full confident to you and your developments....
Although I wanted to try with eRobot v2.3p in the past but I could not, as I did not get clarified if it supports İnt languages including Turkish..
Please allow and help me two find out two things;
-if Türkish lang is supported? (Changedlog in erobots blog does not have this info)
-if it can be flashed onto eRobots modified version 1.x mentioned above?
Ths in advance...
Click to expand...
Click to collapse
A working language pack would be quite useful for a lot of users.
Yes, please post any relevant links and report your findings.
Appreciated
Sent from my GT-I9500 using XDA Premium 4 mobile app
vivalamoza said:
Cannot thank you enough for giving us more options for our beloved 7.7
One question before I give this a shot; dies this fully wipe the device like the previous eRobot ROM?
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
I have stated in both Post#1 & Post #2 there are wipe options
Full wipe install wipes:
1. system
2. preload
3. cache
4. dalvik-cache
5. data - EXCEPT your data/media folder (internal sdcard contents are safe)
Dirty wipe install wipes:
1. cache
2. dalvik-cache
no full wipe option = no gripe = no posting in thread
Edit: I will make the wipe options clearer in Post #4 when I return home
Edit 2: As per installation instructions, always backup. To be safe, backup to extSdCard and off device
Sent from my GT-I9500 using XDA Premium 4 mobile app
UpInTheAir said:
A working language pack would be quite useful for a lot of users.
Yes, please post any relevant links and report your findings.
Appreciated
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here it is;
http://d-h.st/nBJ
You may go and see the post #37 for more of below link..
http://forum.xda-developers.com/showthread.php?t=2276509&page=4
Ths for your kind concern..
Pls also comment if it is flashable onto eRobots v1.0 ? or elseeRobot base rom is obligatory?
sas_sas said:
Here it is;
http://d-h.st/nBJ
You may go and see the post #37 for more of below link..
http://forum.xda-developers.com/showthread.php?t=2276509&page=4
Ths for your kind concern..
Pls also comment if it is flashable onto eRobots v1.0 ? or elseeRobot base rom is obligatory?
Click to expand...
Click to collapse
Thanks mate. I'll take look later tomorrow. Out ATM.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Hi UpInTheAir
Great to see new rom for p6800, any chance to have this 2.3P with Tablet UI as I prefered Tablet over Phablet UI.
I am using eRobot v1 and it's been long time no see the recovery screen
Thank you U.I.T.A
You really make my baby last forever and ever...
I haven't installed this yet, but will do when I have some down time.
I am wondering about the reboot bug with the p6810 BODIVAS - has anyone who has repartitioned their p6810 and turned it into a p6800 still had the reboot issues with screen off OR powering off when connected to the charger?
I am contemplating repartitioning my baby. I use it for work and don't want to take too many risks with it..
Sent from my BlueStacks using Tapatalk 2
khangozzy said:
Hi UpInTheAir
Great to see new rom for p6800, any chance to have this 2.3P with Tablet UI as I prefered Tablet over Phablet UI.
I am using eRobot v1 and it's been long time no see the recovery screen
Click to expand...
Click to collapse
eRobot has kindly given his permission to mod his ROM and release. His base ROMS have been at XDA for a long time and thank him very much. So far, I have only repackaged, added some small tweak and mod with option.
I don't intend to be using this tab for much longer, will be going to my 9yo boy. I prefer tablet ui too, but he prefers the phablet. Sorry I, don't have more time for anything else unfortunately.
Sent from my GT-P6800 using XDA Premium 4 mobile app
fastest said:
Thank you U.I.T.A
You really make my baby last forever and ever...
I haven't installed this yet, but will do when I have some down time.
I am wondering about the reboot bug with the p6810 BODIVAS - has anyone who has repartitioned their p6810 and turned it into a p6800 still had the reboot issues with screen off OR powering off when connected to the charger?
I am contemplating repartitioning my baby. I use it for work and don't want to take too many risks with it..
Sent from my BlueStacks using Tapatalk 2
Click to expand...
Click to collapse
I have had the device power off only once, and that was connected to AC charge source. I can't remember if it was bodivas or re-partition method.
As most of my testing has been with stock or-packed stock Kernel, need also to test if same for SkyHigh kernel (both methods) and if it only happens when full charge is reached.
I can definitely say (so that far) device has never powered off on USB 2.0 charge from PC with screen off and full battery for either method.
Sent from my GT-P6800 using XDA Premium 4 mobile app
+1 for tablet UI mode. Please
SlimKAT for S4 mini (GT-I9190 + GT-I9195)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimROMs is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimROMs team work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKAT is the project name for SlimROMs based on Android 4.4+ and offers the following unique SlimROMs features :
FEATURES :
-> The real dark Slim : Invert the whole ROM including Gapps with one click.
-> Slim Recents : A complete replacement of the AOSP recents screen to allow better multitasking, along with marking favourite apps.
-> SlimPIE : Based on CM's PIE, inspired by PA's PIE with a light touch of Slim. A true community feature.
-> Slim dialer : A full replacement of the official Google closed source dialer with added features.
-> Privacy guard : Disable unnecessary permissions set by app developers.
-> Shake Events : Shake your device to launch apps or secure it on lockscreen.
-> Notification reminder : An easy way to quickly set short reminders to show on the notification drawer.
-> Notification drawer and and lockscreen shortcuts : Access your most important apps from everywhere.
-> Custom Quick Settings Tiles : Why just settings? Use whatever you want.
-> Camera : Discover SlimROMs team unique Camera feature...
DISCLAIMER : Every team mentioned below and myself or any contributor to this project will never ever be responsible for any damages you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> SlimROMs team (ROM tree)
-> CyanogenMod team (device and kernel trees)
-> TheMuppets team (vendor tree)
-> SaberMod team (toolchains)
NOTE : I am not affiliated with any of the teams mentioned above...
THANKS TO :
-> @F4k (for sharing some of his knowledge with me...)
-> @JustArchi (build optimizations)
-> @aconger (screenshots)
INSTALLATION : To install this ROM on your Galaxy S4 mini 3G/LTE you'll need this checklist to be all checked
kitkat enabled custom recovery : regular / Philz CWM or TWRP...
My SlimKAT ROM file...
-> If you are coming from stock ROM please do a full wipe (cache/dalvik/system/data) from recovery before flashing it AFTER having done a FULL NANDROID BACKUP, thank you !
-> If you are coming from another AOSP ROM, you can flash it AFTER having wiped cache/dalvik...
OPTIONAL : You can use any AOSP GAPPs if you want to have Google Play services (I'm using PA-GAPPs nano-modular package by @TKruzze for example )
NOTE : SlimKAT is a KK 4.4+ ROM so if you want to activate ART instead of DALVIK, simply go to 'settings/developer options' and select ART as runtime :good: BUT please do remember that ART is still under heavy development...
DOWNLOADS :
=> This ROM is DEODEXED : if you want to ODEX it (better battery life and better system wide responsiveness), then i do recommend that you use @MatrixDJ96 ODEXER tool available HERE
TWRP Recovery
=> You will find my TWRP for S4 mini page over here...
SlimKAT ROM
=> STABLE version
SlimKAT for GT-I9190 Build 9.0 (2015-01-20)
SlimKAT for GT-I9195 Build 9.0 (2015-01-20)
=> TRYOUT version : none ATM !
Kernel updates : enhanced CM kernel built with latest SaberMod GCC 4.9 is available and is featuring O3 + graphite + Linux 3.4.106 (full details here...)
=> INFO : As i do not own a S4 mini anymore each upcoming update for both devices will be UNTESTED by myself...
-> In SlimKAT root access needs to be activated like this (true if installing for the first time...) : go to 'settings/developer options' and disable it, then go to 'settings/advanced settings/superuser' and set root access to 'apps/adb' (this will re-enable 'developer options' AND you will gain root access)
WARNING : Some information below is maybe obsolete !
NOTE : My SlimKAT ports for GT-I9190/5 ports include 'S4 mini settings' APK !
INFO 1 : CURRENT ROM FILES ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT (at the top of this post).
INFO 2 : You will find screenshots of this running ROM file from the corresponding tab of this project too...
Happy flashing !
CHANGELOG :
2014-04-07 : RC1 -> INITIAL RELEASE
=> Bluetooth is not working... it's a CyanogenMod device specific issue; if you want you can try to flash a custom kernel onto your phone after flashing my ROM file... it will maybe fix the BT issue... (choose any AOSP custom kernel suitable for the Galaxy S4 mini LTE...)=> Auto rotation is failing too... i'm working on it ATM !=> DPI is small ATM... value will be raised in next build
2014-04-09 : RC2
=> DPI is fixed and set to 230 220 in the SlimKAT ROM .zip flashable file :good:
2014-05-27 : RC3
=> same ROM features (and failings...out of the box bluetooth is still not working at all !) as RC2, BUT...=> ROM is compiled with 'Google GCC 4.8' and kernel with 'Official Linaro GCC 4.7' with straight @justarchi v2 optimizations applied ! (you can document yourself about it in his topic over here... special thanks to him for his great work :good:=> In addition, RC3 is a 'user variant' build (ODEXED), not a 'userdebug variant' one (DEODEXED) like it was previously the case, with all 'slowing down debugging options' turned OFF...=> RC3 is not compatible AT ALL with all previous releases; please perform a clean install... Thank you !
2014-06-01 : RC4
=> same ROM features as RC3, BUT...=> bluetooth issue of my S4 mini SlimKAT ports is history ! :victory: :good: (BT is now fully working out of the box : therefore my SlimKAT BT fix is obsolete and is discontinued from now on; it is also the case for my 'S4 mini settings' flashable .zip -> post number 2 will soon be empty...=> RC4 is not compatible AT ALL with all previous releases; please perform a clean install... Thank you !
2014-06-10 : STABLE
=> same ROM features as RC4 which was already stable, BUT in addition you will find...=> Android 4.4.3 4.4.4 !=> 'build.prop' file is fixed ! (from inside the ROM installers which are not signed anymore...)=> F2FS support ! (latest CyanogenMod 11.0 kernel is officially F2FS enabled...) : therefore, you should be able to boot your device with embedded kernel, whatever the filesystem used (EXT4/F2FS) by tinkering my ROM installers a little bit...=> APP2SD functionality ! (available from 'settings/apps' menu)
NOTE : If you are interested in my work and download my files, please report back AND hit my 'THANKS!' button if you think i deserve it ! Thank you !
Have fun with it !
XDA:DevDB Information
SlimKAT for S4 mini (3G/LTE) [UNOFFICIAL], ROM for the Samsung Galaxy S4 Mini
Contributors
ne0zone75, silesh.nair, spanish33
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any kitkat enabled custom recovery
Based On: SlimKAT
Version Information
Status: Stable
Current Stable Version: STABLE
Stable Release Date: 2015-01-20
Current Beta Version: TRYOUT
Created 2014-04-07
Last Updated 2016-12-24
SlimKAT Power Packs for GT-I9195/0 + S4 mini settings for SlimKAT...
SlimKAT Power Packs
I've re-packaged my original SlimKAT Power Packs for TF300T init.d scripts (Browser2RAM & ZipAlign) into two flashable .zip files to enhance user experience of SlimKAT on GT-I9195 , AdBlock is included and when flashing these packs, filesystem of your device is automatically tuned (see details below )
-> Basic Power Pack for GT-I9195/0 : contains AdBlock and Browser2RAM + ZipAlign scripts while ext4 filesystem tuning sets data journaling ON for /data but tunes /system and /cache too :good:
-> Enhanced Power Pack for GT-I9195/0 : it's contains and does exactly the same as the one above BUT it features GPU Tweaks : GPU 2D is forced AND software rendering is disabled !
The main purpose of the first pack is to safely improve the user experience on your device and to raise improper system shutdown tolerance, while the second one share the same purpose with maybe enhanced graphics performance :good:
PREREQUISITE : Please perform a full NANDROID backup from recovery before flashing it !
DISCLAIMER : I will never ever be responsible for any damages you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> @hardslog (this pack is based on his one... thank you !)
-> me
INSTALLATION : Just flash it AFTER a full NANDROID backup, then just wipe cache/dalvik and reboot to system... You can use it with any kernel : embedded CM / f4ktion / etc...
DOWNLOADS :
-> SlimKAT Basic Power Pack for GT-I9195/0 (2014-04-21) | MD5
-> SlimKAT Enhanced Power Pack for GT-I9195/0 (2014-04-21) | MD5
Have fun with it...
NOTE : These packs have been tested by myself, you should safely flash it to your device... if anything goes wrong then restore your full NANDROID backup
INFO : THESE PACKS ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT (at the top of this post)
PS : Thanks @kioshio for pointing a bug out in the initial release...
THE SECTION BELOW IS DISCONTINUED AND OBSOLETE !
S4 mini settings for SlimKAT
You will find below a Dev-Host download link for this SlimKAT re-compiled APK, packaged into a convenient .zip flashable file :victory:
I have tested it and it is working as expected... simply flash it and enjoy
DOWNLOADS :
-> S4 mini settings for SlimKAT (2014-04-30) | MD5
Have fun with SlimKAT
SlimKAT for GT-I9195/0 bluetooth fix released !
Reserved...
Nice ill try it
Sent from my GT-I9195 using XDA Premium 4 mobile app
imputazz said:
Nice ill try it
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello and thank you for trying it out :good:
ROM works pretty good, but at first boot, the DPI was set on 220, so I've changed it to 230 and the ROM looks like a regular S4 Mini ROM now.
BTW, you as a developer, is there any chance to force kernel to send power to USB port? I mean USB OTG.
lipalok said:
ROM works pretty good,... ...BTW, you as a developer, is there any chance to force kernel to send power to USB port? I mean USB OTG.
Click to expand...
Click to collapse
Thank you ! I honestly do not know how to do this sadly... maybe you could ask for this feature into any GT-I9195 custom kernel thread
Have a nice day
Sent from my GT-I9195
How can anyone change dpi??
mobrol said:
How can anyone change dpi??
Click to expand...
Click to collapse
Hello, you'll find a mini HOWTO HERE...
Kind regards
EDIT : DPI will be adjusted in upcoming SlimKAT RC1 for GT-I9195 build 4.2 Thanks @lipalok for pointing this out :good:
Is halo implemented?
Flatric said:
Is halo implemented?
Click to expand...
Click to collapse
Hello, unfortunately no, it isn't... you'll find below corresponding official SlimKAT FAQ entry from SlimROMs official website
When are you/Are you going to add Halo?
Not before it is stable. It's currently not in a state that we can include it. And even when it becomes stable it's currently not something that we're considering including.
Click to expand...
Click to collapse
ne0zone75 said:
Hello, unfortunately no, it isn't... you'll find below corresponding official SlimKAT FAQ entry from SlimROMs official website
Click to expand...
Click to collapse
Ok, thanks for the fast answer
Sorry I just got the phone today.
This rom will not work with 9192? And will 9190 work? Or only 9192 ROMs for my phone?
Pangadaywalker said:
Sorry I just got the phone today.
This rom will not work with 9192? And will 9190 work? Or only 9192 ROMs for my phone?
Click to expand...
Click to collapse
Hello, my SlimKAT ROM file is dedicated to S4 mini LTE (GT-I9195) ATM, its embedded kernel fits ONLY this device... not S4 mini 3G (GT-I9190) or S4 mini dual (GT-I9192) sadly BUT i may add support to these 2 S4 mini variants someday
With that said, you can still try to flash it... it will certainly boot BUT you will lack device specific features like dual SIM support AND after SlimKAT ROM flashing you can try to flash a custom kernel from recovery that fits exactly your phone variant
Cheers
Sent from my GT-I9195
SlimKAT RC1 for GT-I9195 build 4.2 is out !
Dear SlimKAT users, i've just updated download links for current SlimKAT weekly build 4.2 by SlimROMs TEAM on both xda (downloads tab on this project) and Dev-Host :highfive: Simply checkout post number 1
Below you'll find build 4.2 changelog from SlimROMs official website :
Changelog:
SlimRecents fix 50ms unresponsiveness
Chamber of Secrets string edit
Chamber of Secrets add global database
Fix slow start for settigns/sound
Fix avrcp absolute volume
Do not show Home behind full screen activity
Fix Airplane mode on/off
Parallel shutdown
Great deal of fixes and optimizations for frameworks base
TWRP updated to 7.0+ (for devices with recovery in boot.zip)
Update busybox
Some updates to hardware_qcom_audio-caf
Some updates to frameworks_av
Click to expand...
Click to collapse
You can safely dirty flash it over initial build 4 release :good: (a full NANDROID backup from recovery is recommended though...)
NOTE : I still do not have fixed DPI but you can set it manually after flashing...
From a terminal with root access enabled simply follow these instructions in order to adjust DPI :
Code:
# mount -o rw,remount /system
Then with a text editor simply edit /sytem/build.prop file and search for this line : 'ro.sf.lcd_density=182' (without the quotes...) and please change 182 value to 220 like this 'ro.sf.lcd_density=220' then save the file and input this from the same termnal session started in previous step :
Code:
# mount -o ro,remount /system
...finally you just have to reboot and DPI will be fixed :victory:
Sorry for the inconvenience DPI will be correctly set in .zip flashable file i will release for upcoming SlimKAT RC1 for GT-I9195 weekly next week
Have fun with it
I am still checking what is valid for my phone and what is not. Unfortunately or fortunately I don't know there isn't much so I may stop for now with playing with ROM's. Will wait if 4.3 at least get to the 9192 I will be happy already.
Didn't even find a bloatware free ROM for 9192. I found only the trueclean but I didn't yet root my phone because of Knox stuff which I am not sure I should pay much attention since I never used the warranty of any phone we always replace it first.
I will see and keep reading of what comes out.
Another question I have since 9190 is the same for 9192 besides the dual chip and I do not use dual chip support, can I get 9190 and will it work perfectly withouth the dual sim support (which I don't actually needed it)?
Pangadaywalker said:
...Another question I have since 9190 is the same for 9192 besides the dual chip and I do not use dual chip support, can I get 9190 and will it work perfectly withouth the dual sim support (which I don't actually needed it)?
Click to expand...
Click to collapse
Hello, according to phoneArena.com website and AFAIK, GT-I9192 is the dual SIM slot version of the GT-I9190 aka Galaxy S4 mini 3G (serrano3gxx); i do know that GT-I9192 SOC is a Qualcomm Snapdragon 400 MSM8230 and GT-I9195 features a Qualcomm Snapdragon 400 MSM8930 as well as GT-I9190 (i think so because both GT-I9195 and GT-I9190 have the same 'msm8930-common' CyanogenMod kernel sources tree as a basis... only defconfig file differs !).
So if you own a GT-I9192 and put a GT-9190/GT-9195 custom ROM on it, it will fail because SOCs are not the same on GT-I9192 and GT-I9190/GT-I9195...
With that said if you want to install a custom ROM on your GT-I9192 you'll have to find a dedicated custom recovery and ROM because i'm afraid that CyanogenMod kernels for GT-I9190/GT-I9195 may be incompatible with GT-I9192 but i'm not sure about this sadly...
Best regards
Where did you read that the 9192 uses MSM8230?
Whosat said:
Where did you read that the 9192 uses MSM8230?
Click to expand...
Click to collapse
Just over here at phoneArena.com (GT-I9192 specs are at the bottom of the page...)
Samsung Galaxy S4 mini Dual I9192 (With Dual SIM support)
Differences:
Weight: 3.81 oz (108 g) the average is 4.8 oz (137 g)
System chip: Qualcomm Snapdragon 400 MSM8230
UMTS: 850, 900, 1900, 2100 MHz
Data: HSDPA+ (4G) 21.1 Mbit/s, UMTS, EDGE, GPRS
Multiple SIM cards: 2 slots
Click to expand...
Click to collapse
...of course it may not be accurate...
Nice work on the Rom, but am I missing something or is there no theme support.
Sent from my GT-I9195 using Tapatalk
Hello friendz ..
Here I present Vivo Rom for pocket ..
The best themed & ultra fast rom.
#CREDITS
san122
brijeshep
MuSaddiq
[email protected]
Samsung for galaxy pocket
Google For Android
And Myself.
If i missed any dev please please pm me and don't spam my thread
ROM OS Version:2.3.x GingerbreadROM Kernel:Linux 2.6.x
ROM Firmware Required:GT-S5300
Based On:CyanogenModVersion Information Status: Stable
Current Stable Version: 3.2
OVERVIEW
Here I present my VIVO 3.0 ROM.Based on UnOfficial CM7.2 Compiled from source by bieltv.3it is a HOLO light themed rom with perfection.We need your support to make this rom better.
Please donate to the original dev's To make this series continue and deliever their best for us ..don't just download donate and hit thanks button for original dev's ..
#FEATURES
FULLY HOLO LIGHT themed.
A new experience designed my me to catch your eyes.
KITKAT Bootanimation Less boot time.
An ultra smooth rom.
Bestest themed rom till its existance.
Adrenaline engine integrated.
Fixed more rom bugs
Quickpic 2 as default media galleryapp.
A rom recommended for daily use.Holo launcher as default launcher.Vivo Hub forked from the sources.
from cosmic and evo app developed by iamareebjamal and b16h22 to totally control your romand personalise it according to your needs.
Redefined and rethemed all apps.
Fixed Wifi to Network issue [Maybe]
New SystemUi
Fixed text bugs in dialer Other improvements too .
And much more..
#INSTALLATION
1. Flash a stock ROM, installation will be cleaner.
2. Download The EXT4 tool from link section , and this ROM on your device.
3. Flash on Samsung recovery (or your recovery if you are not on stock), this temp. CWM (by bieltv.3)
4. When you are on the Temp. CWM, flash the EXT4 Formatter tool, so whole system will be converted to EXT4. (stock file system is in RFS)
5. After installation completed go to the CWM, Wipe data, cache and dalvik cache.
6. (IMPORTANT) Go to mounts and storage, and make sure system is mounted (will show unmounted) mount it 2 times!
7. Go to install zip from SD Card, choose Rom zip from SD card and install this ROM.
(MAKE SURE installation last more than 5 seconds, if is less than 5 seconds, your system is unmounted! repeat step 6).
8. After installation, go back and reboot system,
if you made it good, ROM boots, so no problem on it.
Original Rom Thread :
http://forum.xda-developers.com/showthread.php?t=2694851
LINKS :
EXT4 : http://www.mediafire.com/?u3p1a3m525k5vd9
Rom ViVo : http://www.mediafire.com/?j3j93ofkldi82ie
Seonsors Fix : http://www.mediafire.com/?vyxvxhq09116dlb
Screenshots : i will add aftersometime
Bugs : Check And PM
*****Thanks To All*****
Nice ROM
My Works :
[ROM] [PORT] [UNOFFICIAL] [CORI] [01/05/2014] CyanMobile eXperience 2.3.8 [STABLE]
[ROM] [DEV] [PORT] [CM7.2] [Cyanogen Kitkat Experience V2.1] [Cori] For Galaxy Pocket
[ROM] [DEV] [PORT] [CM7.2] [CyanoWiz V1.0] [Cori] For Galaxy Pocket
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! You may ask yourself what this rom is about and what you can expect from it, so it's basically something similar to the SuperMan-Rom on the Galaxy S7/S7 edge, but based on the latest and greatest software of the s8+. I was able to make a full port of the s8 (with almost all libs being s8) and I also made a backport of the latest Mali GPU driver (if you install this rom, you will be one of the first to be have a ported Mali GPU!).
! It has many custom featuers, you will find it below in the feature list :thumbup:
As you maybe know I'm a little fanboy from samsung, means I really love the stock look of the UI and the rom will always be based on most recent version from samsung, current base used is G955FXXU1AQK7 (compatible with S7 and S7e)
I wish you much fun reading through the features and while using this rom! Enjoy
So this rom should be installed by anyone loving to use a rom close to stock BUT with many mods inside aroma/rom control.
Also I'd like to make the already fast galaxy s7 even more faster as it already is! Let's see if we can reach this goal
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V1.5.0 Nougat:
- Based on latest G955FXXU1AQK7 Nougat base
- Prerooted with SuperSU V2.82 SR5, Phh root r310 or MagiskSU (choose in aroma)
- Magisk V14.5 (aroma selectable)
- Latest Busybox installed (aroma selectable)
- Aroma installer! with support up to 4GB zip files
- CSC features can be choosen and installed in aroma (such as Applock, Floating Message, Call recording and more!)
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! App name is BatMan Settings Free
- Fully deodexed (also framework)
- Rom informations and logo inside settings
- LED indicator settings
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in RomControl (like header colors, qs colors and notification colors)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Use volume key on lockscreen to switch music titles
- Knox stuff can be choosen in aroma
- Back to kill (in RomControl)
- Stock Kernel or BatStock-Kernel(choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Sound Mod with lot improvements! (choose in aroma)
- Latest November Security Patch
- Many other features, can't list them all, please read changelog to see what changed over the time
Rom review by @shark jungle:
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin (if you don't have odin, download it here), following this thread S7e TWRP until it works correctly (to access download mode, press home+volume down+power on while phone is turned off)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host
3. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open BatMan Settings Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G935F/FD/K/L/S/W8:
V1.5.0 on Android File Host
Download via our Server (you need to be signed in)
Bootloader/Modems SM-G935F/FD/K/L/S/W8
CSC Selection V1.2.5
BatStock-Kernel for S8 Ports
Useful Links:
Our new Grifo Development website
GrifoDev Thread for Beta testing
Telegram BatMan News Channel
Telegram BatMan-Rom Chat
Telegram Dark Knight Theme
Known Bugs:
- Iris scanner (if you know how to implement an iris scanner into a s7e let me know )
- face unlock by samsung, we have face unlock by google
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V13.1
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- TheFreak for his work as designer and his help with the website
- mwilky for his fingerprint after reboot mod, the colors control and other mods, help with private mode
- Asc1977 for a few mods I already used on SuperMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
BM Settings App on PlayStore
XDA:DevDB Information
BatMan-Rom SM-G935F, ROM for the Samsung Galaxy S7 Edge
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/BatMan-Rom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V1.5.0
Stable Release Date: 2017-12-01
Created 2017-07-12
Last Updated 2018-02-16
Changelog:
BatMan-Rom V1.0.0
- Initial Release on XDA
BatMan-Rom V1.1.1
- Rebased on latest AQF7 release
- June security patch
- Fixed the gap in pulldown menu
- readded private mode
- added a switch in RC for immersive mode
- updated csc to AQF7
- added a switch for wake the device with the volume buttons
- fake system status to official
- removed camera mod, it didn't work anyway
- updated magisk to latest v13.1
- updated all kernels with AQF7 base
- updated supersu to v2.82 sr1
- made the rom compatible with s7/s7e edge devices
- added an option to control icon colors/progress bars etc
- added a custom music apk to be colored (thanks to @Therassaad)
- many more things, check out the rom
BatMan-Rom V1.2.0
- Rebased on latest AQGB release (I know AQH3 is out, but until samsung releases a new kernel source it normally takes a few weeks that's why this base is used for now)
- July security patch
- Added navbar icon colors @mwilky
- Added navbar to get colors from statusbar (as long as the app doesn't set a default color) @mwilky
- Added in "misc" batman settings to disable touchkey light (s7 only of course)
- Readded custom color selection for navbar in stock settings
- Removed a few camera mods which weren't working
- Updated CSC to AQGB, also added all CSC in OMX (including BTU)
- Updated all Kernels to latest source and ramdisk
- Updated SuperSU to 2.82 SR3
- Added a the S Power Planning feature (forward ported from galaxy j7 prime), choosable in aroma as a csc mod
- Updated OperaMax apk to not show as chinese apk, many people meant it's a trojan lol
- Updated adblocker host file
- Updated all included modems and bootloaders
- Added a stock kernel even for the s7, so you can choose stock there as well!
- Updated Magisk to latest V13.5 beta version
- Added modded camera into aroma @zeroprobe
- Added 100+ fonts apk into aroma
- Updated busybox to most recent version
- Updated dual speaker mod to most recent version
- Added VoLTE and wificalling into pulldown menu
- Reduced download size to 3GB only (hahahaha only 3GB )
- Include sticker fix by default
- Use much less s7 libs, I hope to fix: camera crashing and some call issues with this!
- Included google face unlock, you find it in security, smart lock (to get samsungs one working I'm almost sure it's hardware related), but at least face unlock works!
- The scripts do now change build.prop to G930/G935 if a s7 model is detected, this fixes: wallpaper stretch, samsung vr. However if you wish you can always change that back to G950/G955 in aroma, there is an option for this!
- Updated all libs from s7 with latest base libs from DQG1
- Game tools: I still couldn't figure out why the systemui now even crashes. Samsung integrated the navbar even more deeply into the system this time. On some point I won't be able to fix the game launcher crashing and you will end up not to include it or using the navbar. I'm really sorry that I failed with fixing this one
- Small other changes which bring hopefully less issues!
BatMan-Rom V1.3.0
- Rebased on most recent AQH3 firmware update
- August security patch
- Added navbar height tweak @mwilky
- Added force expand notifications @thereassaad
- Updated all kernels to most recent source drop and linux version
- Updated magisk to V13.6
- Updated SuperSU to V2.82 SR3
- Added batman gif animations
- Fixed gif overlapping device informations
- Readded autostart manager in modded settings
- To disable the volume warning, there is now a switch in notification panel options to enable/disable it
- Fixed long press back not bringing up menu @mwilky )
- Removed OTA Updater. This services is outdated and not working anymore.
- Readded touchwiz double tab features! Double tap anywhere on launcher to do custom actions (the only thing which does not work yet is starting the torch light)
- Updated samsung music to most recent version with all the custom mods thanks to @thereassaad
- Fixed next alarm on lockscreen showing the wifi icon
- Fixed heads up display not working when switching in RC
- Added a new custom signal icon
- Edge lightning can now be customized! Choose a custom color OR if it should take the color from the app itself!
- Added alarm volume control to sound
- Fixed adaway app not being installed even if you selected adblocker
- Removed viper mods, since they can easy be outdated it's better to keep them outside. I hope people will go and visit the threads of the sound mods
- Updated included bootloader and modem to most recent version
- Updated csc to AQH3
- Added many new CSC mods, BUT BE AWARE, 5 SIGNAL in statusbar kills Wifi-Calling/VoLTE!
- Removed the last not working camera mod: video collage!
S7 specific changes:
- Delete the gameoptimizer in /system/app so games won't crash on startup (only if no navbar is selected)
- Fix SystemUI crashing if no navbar is installed (thanks to @mwilky )
- Use a special made framework.jar file for s7 devices, this should bring much better batterylife!
- Maybe some more things I already forgot, have fun!
BatMan-Rom V1.4.0
- Rebased on most recent AQI7 firmware update
- August security patch (there is no single september security patch released by samsung)
- This base fixes blueborne problems (which was samsungs main goal)
- Updated all kernels to most recent source drop and linux version (AQI7 for S8 and DQIC for S7)
- Updated magisk to V14.2
- Updated SuperSU to V2.82 SR5
- Added memory cleaner next to brightness slider
- Added listview animations thanks to @asc1977!
- Added a new telephony icon to romcontrol
- Added quickunlock thanks to @mwilky and @Grouxho
- Added Xposed V88.1 for magisk, why only magisk? Stock xposed can't be installed via an aroma script to-date, hoping rovo will change this in the future
- Updated all busybox to latest 1.27.1
- Updated adblocker
- Fixed lags in notification panel, for custom edge lightning you simply need to update the edge lightning service with samsung store!
- Fixed USB wakeup switch not working
- Updated launcher to support gestures even with latest update
- Updated included bootloader/modems for F/FD models
- Maybe some more things I already forgot again
S7 specific changes:
- Fixed game launcher crashing without navbar thanks to @Grouxho
- Updated face unlock by google
- Updated all libs/files to DQIC base
BatMan-Rom V1.5.0
- Rebased on most recent AQK7 firmware update
- November Security patch included
- This base fixes krack problems (krack explained: Krack)
- Updated all kernels (AQK7)
- Updated Magisk to V14.5
- Updated Xposed to 88.2 (magisk version, aroma choosable)
- Updated Xposed Installer to 3.4
- Updated adblocker host file
- Updated bootloader/modem to AQK7
- Updated zeroprobes camera mod
- Stock camera does now only feature stock camera mods, for advanced camera mods please use the modded app (which includes almost all modes)
- Fix notification background image not sticking after a reboot
- Fix carrier label on pulldown overlapping with navbar
- Fix lag on pulldown, introduced by force expand notifications. THIS MOD HAS BEEN COMPLETELY KILLED
- Add qs panel number counts to romcontrol
- Removed most google apps from debloater, why: the zip file increases all the time, you can download the apps easily via playstore, also you have them installed as user apps then
- Add modded youtube to play background videos and watch videos without ads
- Add modded GBWhatsApp and GBInstagram thanks to the GB team!
- Moved some more bloatware related to Gear VR into Gear folder
- Added "edge panel" to debloat menu
- Update update-binary
- Updated SMusic app
- Updated Modded Fonts
- Added googles web view by default, so we don't need google chrome
- Busybox installer updated
S7/S7e specific changes:
- Include S7 gamelauncher if no navbar is chosen
- Include S7 UDSS code files if s7 build.prop is chosen
- S7 libs updated to DQK1
- Kernel source DQK1
Useful posts and links
App on PlayStore:
Find my own BatMan app on PlayStore: BM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
TWRP links:
TWRP S7e Thread
Official TWRP website for s7e
Bootloader and Modems:
SM-G935F/FD/K/L/S/W8 BL and CP (all models in one folder!)
SM-G935F/FD BL and CP
SM-G935K BL and CP
SM-G935L BL and CP
SM-G935S BL and CP
SM-G935W8 BL and CP
Magisk related Threads:
Magisk V13.3
Magisk Beta V13.6
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
BatStock-Kernel
TGP Kernel
Notorious Kernel
Morokernel
Apollo Kernel
Roms made by me:
SuperMan-Rom a customized rom based on official s7 releases
HydraRom which is a full note 7 rom compatible with our s7.
SuperStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Thread about CSC:
Download latest CSC from CSC Selection V1.1.0
All CSC's ever released
How to donate:
Donate via PayPal.me
Donation via normal PayPal
Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader, modem and TWRP recovery. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G935F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon (like a cloud) appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from batman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore BatMan control settings after a clean base update, why?
A: Backup for BatMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in BatMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Encryption does not work anymore on Nougat roms with TWRP installed, sorry to tell...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: There are some test version of Xposed on N, I don't recomend to install it!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent BatStock Kernel
3. Flash Magisk V13.3
4. Open Magiks Manager, go to settings
5. Enable MagiskHide, systemless hosts and systemless busybox
6. Reboot the phone and check safetynet!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: What to do when I can't login to snapchat?
A: Clean install the rom without root and login to your snapchat, save the app with titanium backup, flash back root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Questions about Kernels:
Q: I want to switch kernel, how?
A: We have systemless we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Questions about S8 Ports:
Q: I have the problem that on each game I start, the screen becomes black, why?
A: This happens on all roms if you haven't selected S8 navbar AND updated game tools via samsung store. I will explain: the new s8 has an updated game launcher which works together with the navbar. The rom itself includes an older version of that app to work well if you don't choose the navbar. If you update the game launcher, the store will think you got a s8 (as this is a full s8 port). After that it installs you most recent s8 game tools and you got this issue with black screen! Solution: don't update that game tools!!
Q: I have a GAP on the stock launcher with no s8 navbar, why?
A: Samsung recently started to update all their apps via playstore. So if you update the launcher via play store, the app will be stock from samsung and not modded anymore. Means that GAP will appear again after the update. Solution: simply don't update the app
Q: I have a virtual home button on the AOD and it won't go away!
A: You should be able to update the AOD app via samsung store, that will fix it.
Q: On AOD analog clock I can't see the clock seconds and hours on the first clock, all others are working fine. How to solve?
A: I'm aware of this and will try to fix it on upcoming updates!
Q: How can I get camera stickers to work?
A: By flashing the provided fix from the OP
Q: How can I get secure folder working again?
A: I dropped support for secure folder officially, but there have been some discussion about a fix, check it here
Reserved1
downloading now.
jioleight said:
downloading now.
Click to expand...
Click to collapse
Finished yet? We are dying to know
Any screenshots?
Great job ! very smoothly rom :d
florin_stann said:
Finished yet? We are dying to know
Click to expand...
Click to collapse
not yet. my speed is only 5mbps so it will take an 1hr+ to download.
florin_stann said:
Finished yet? We are dying to know
Click to expand...
Click to collapse
What do you want to know? We tested this rom now several days on www.grifodev.ch to fix all left errors
Raidermerc said:
Any screenshots?
Click to expand...
Click to collapse
Screenshots of what do you want to see? It's the full s8 UI , look and feel
Good ! But it will be more stable if you port N7 FE rom.
Gửi từ SM-G955F của tôi bằng cách sử dụng Tapatalk
ksr007 said:
Good ! But it will be more stable if you port N7 FE rom.
Gửi từ SM-G955F của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
I don't own a Note 7 FE, means I can't make it supported for 4 big devices, this rom is for S7, S7e, S8, S8+ all in one zip. I'm so proud lol (and plus it's not really a port when you can simply use almost all from another base, as the SOC is the same )
I will port the Note 8 roms in the future (when I can get one lol ) :good::good:
Downloaded the latest version Rom v1. 1.1
I will test it, come back in view days.... Happy ? with it!
Awesome .. i was waiting you to do it .... downloading
S7/S7 Edge Camera
@Tkkg1994
I was just wondering if there is an option in Aroma which
allows us to select the stock S7/S7 Edge camera?
Thanks, have a great day!
Tkkg1994 said:
I don't own a Note 7 FE, means I can't make it supported for 4 big devices, this rom is for S7, S7e, S8, S8+ all in one zip. I'm so proud lol (and plus it's not really a port when you can simply use almost all from another base, as the SOC is the same )
I will port the Note 8 roms in the future (when I can get one lol ) :good::good:
Click to expand...
Click to collapse
no wonder why the size is 3GB. haha. just finished my download. off to recovery I go.
Hello, i will test your rom soon. I would like to know if Batstock kernel is the same that Superstock kernel ?
thanks
PS Sorry for my english
Handeman707 said:
Downloaded the latest version Rom v1. 1.1
I will test it, come back in view days.... Happy with it!
Click to expand...
Click to collapse
Let me know what you think about it!
escoda said:
Awesome .. i was waiting you to do it .... downloading
Click to expand...
Click to collapse
Have fun
Misterjunky said:
@Tkkg1994
I was just wondering if there is an option in Aroma which
allows us to select the stock S7/S7 Edge camera?
Thanks, have a great day!
Click to expand...
Click to collapse
The camera is from the s8, but quality is the same as on the s7 and it looks just as good as ever
jioleight said:
no wonder why the size is 3GB. haha. just finished my download. off to recovery I go.
Click to expand...
Click to collapse
Yeah hahha that made it a liiiittle bit bigger hahah.
have fun flashing!
OMassalia said:
Hello, i will test your rom soon. I would like to know if Batstock kernel is the same that Superstock kernel ?
thanks
PS Sorry for my english
Click to expand...
Click to collapse
Yes it is, only optimized for the s8 port
about to flash this bomb on the s7 of my dad