Related
This is my first ROM!
WORKING NOW!!
DO NOT download the ROM UNLESS you know what you are doing!
I am not responsible for any bricked!!
Screenshot gone! (just stock blur UI)
Features:
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI (Thanks zomgno1)
Zipaligned
Deodexed
Rooted
4 points multi-touch with 15 seconds crack
EXT4
faux123's kernel [email protected]
Click to expand...
Click to collapse
Installation guide:
1. press Vol-down while booting and navigate to "Android recovery" Press Vol-up for going into Clockworkmod Recovery (Custom CWM-based Recovery 5.0.2.3-atrix4.1 recommended)
2. BACKUP FIRST!!!
3. Wipe data/factory reset
4. Wipe cache
5. Wipe dalvik cache
6. install the ROM
7. Reboot to enjoy the overclocked Blur!
Click to expand...
Click to collapse
Changelog:
Next update:
---
v1.2
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI
Download update v1.2
v1.1.1
Removed Carrier name from status bar
1% battery mod
Download update v1.1.1
v1.1
Delete DSP manager
Add EXT4 support
multi-touch hack with 15 seconds crack
v1.0
Initial release
Click to expand...
Click to collapse
Known issue(s):
Click to expand...
Click to collapse
Thanks to faux123, Diviance, zomgno1(HDMI hack) and also Motorola
Click to expand...
Click to collapse
For those who suffer from widget problem, please install the stock kernel. Since I don't know if your device compatible with HK stock kernel.
DOWNLOAD (v1.1)
DOWNLOAD WEBTOP
I was about to download the original sbf and deodex it.
You save my time.
Many thanks
Sent from my MB860 using XDA App
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
supermerkin said:
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
HKTW got special settings for crystal talk
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
totti123456 said:
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
Click to expand...
Click to collapse
I would assume so. The missing widgets problem appears to be linked to faux's kernel, which this has. In faux's thread even people on CM7 that use his kernel experience the widget problem.
supermerkin said:
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is no necessary to back to stock.
I had CM7 before. After Wipe data, cache, then install, no problem at all.
Lol did you remove the download link?
I'll try it again. Maybe I'll do a restore shook the way back to after I unlocked and rooted before flashing and see what happens.
Sent from my MB860 using xda premium
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
supermerkin said:
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So, this is the reason I removed the ROM and now I'm try to make it OK
SORRY!
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
alistair3149 said:
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
Click to expand...
Click to collapse
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
No worries, at least I'm not bricked. Just post the update and I'll try it again later.
Sent from my MB860 using xda premium
nok07635 said:
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
Click to expand...
Click to collapse
It is not your fault,
this rom is for ME860,
but Atrix international should be okay
can you release a version with stock kernel? i dont need to overclock, just want a stable deodexed custom rom... thanks!
Boot up success but I am using AURA ROM developer Diviance's updater-script. I must ask his permission to release!
BTW I try to reboot the phone to see if the widgets missing. Honestly, No problem with BlurHome launcher
The widget problem seems to occur at a random time. It took a few days worth of rebooting to happen to me on homebase. After it happened the only permanent fix was to revert to stock kernel.
Sent from my MB860 using Tapatalk
hi.İ want to ask:
which languages are supported your rom?
[font=Roboto,Arial]Arbiter[/font]
The Arbiter kernel is based on the teamhacksung Aries kernel (the stock kernel when you install CM9 on GS1-line phones). Support is only guaranteed for CM9. It appears to work on Team Nyx RC 5 and MIUI as well.
This is currently a baby kernel, it has one thing which is the OC right now. I'll add more stuff like more CPU governors later.. maybe.
Features
OC 1.3 GHz
More later...
Download
Latest 1.0 ---> Download here
MD5: b7747fbabe8d3b1dec668b5e1ce6e19e
Installation
Flash from CWM recovery.
Source
This kernel is 99% open source, you can grab the source off of GitHub from here, put it on your Linux box, and if you have the required dependencies, you should be able to just build.
Here's how to use the build script:
Code:
./build.sh # repackages (requires kernel to already be compiled)
./build.sh kernel # recompiles the kernel
./build.sh root # repackages ramdisk from staging/ramdisk/ into staging/ramdisk.img
./build.sh recovery # same as root above but repackages the recovery ramdisk instead
./build.sh root+recovery # does both of the above
I think you get the point. You can mix any of the above arguments by adding "+" in between. First time you run the build script you should pass "kernel" to compile the kernel, else the build script will fail because it's not compiled.
Thanks
Code:
* pawitp & teamhacksung
* sixstringsg for hosting
* Mr-Psycho cause I took a look at his kernel build scripts
P.S. This is not the Stock+ kernel me and creeve4 were making, this is forked from that kernel, and contains currently the same changes (OC) but this kernel is mine and will contain more changes later.
Changelog
Code:
1.0
* First version
Looking forward to whats to come xD
Thanks for all that you do for the vibrant community Fault, We appreciate it
Awesome, can't wait for this to mature
Sent from my SGH-T959 using XDA
Awesome, flashing this now... see how it does with a day of usage
Too late
Sent from my SGH-T959 using xda app-developers app
grose65 said:
Too late
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
What?
Great work FaultException, you have been thanked and this puppy has been added to the
Great work FaultException, you have been thanked and this puppy has been added to the Vibrant Kernel Thread.
Keep up the excellent work FE.
I'm behind you 110%
What is benchmark results? Battery life? Does GPS works fine or only "one-time"?
Flashing now
Sent from my SGH-T959 using Tapatalk 2
scrizz said:
Keep up the excellent work FE.
I'm behind you 110%
Click to expand...
Click to collapse
Oh yeah? I'm behind him 111%!
ancifil said:
What is benchmark results? Battery life? Does GPS works fine or only "one-time"?
Click to expand...
Click to collapse
Can't tell if trolling or noobing
Trying to download on my phone, but it is saving as a .htm file not .zip.
Sent from my SGH-T959 using xda app-developers app
ekeefe41 said:
Trying to download on my phone, but it is saving as a .htm file not .zip.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Just rename it
Sent from my SGH-T959 using xda premium
Did anyone here get a boot hang. I wiped dalvik and cache nothing worked. I will flash 7/7/2012 nightly now and attempt to see if it works.
edit: flashed latest nightly and kernel it worked
edit again: nevermind weird rainbow color lines across my screen doesn't get past CM9 boot animation.
creepinm3 said:
Did anyone here get a boot hang. I wiped dalvik and cache nothing worked. I will flash 7/7/2012 nightly now and attempt to see if it works.
Click to expand...
Click to collapse
Coming from SZ? That's probably why. It's best to go straight from stock CM9.
FaultException said:
Coming from SZ? That's probably why. It's best to go straight from stock.
Click to expand...
Click to collapse
I went from stock, gave me rainbow lines across screen
creepinm3 said:
I went from stock, gave me rainbow lines across screen
Click to expand...
Click to collapse
stock kernel CM9*
Working great, hard to tell on battery life so far.. been using navigation and had it plugged in often.
Hi.
This package adds Touch Boost and a multi-processor optimized zram to your CM10 Nightly. Maybe incompatible with older Nightlies or newer. (Currently running my own build - Should be identical with the Nightly from 09.11).
I flagged this stuff as DEV because it may leads to incompatible behaviour and maybe increase battery drain.
Please report (if it helps etc)
Download
cool, gonna try it
Thank u sir ! Does it helps with ril problems ?
Inviato dal mio LG-P990 con Tapatalk 2
Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app
Thank you benee!
Sent from my LG-P990 using xda app-developers app
der.einstein said:
Hi Benee ,
This is a good start for CM10 modifications.
I am currently trying to get iwconfig to work with Wifi TX power app.
Have you plans on compiling additional governors such as smartassv2 or lagfree for the O2X? Would be great as we now have the possibility to use governors...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Nope. I'm not a fan of these voodoo magic governors. Most are ****ty, and bloated und just increase CPU overhead. Better save some cycles and use a simple one like ondemand.
I would suggest that you use interactive or ondemand. Both have Touch Boost support. Which really helps imho.
first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app
der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app
xExabyte said:
I was just gonna post this. Same issue here. I'm on the 1107 build.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Same but i'm on the 1108 build how to uninstall this tweak pack?
can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?
Rom is really faster but wifi doesn't work, With 1103
Sent sometimes from my iPad, if working, using Tapatalk HD
---------- Post added at 09:06 PM ---------- Previous post was at 09:05 PM ----------
atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
Re flash 1108
Sent sometimes from my iPad, if working, using Tapatalk HD
atheoran said:
Same but i'm on the 1108 build how to uninstall this tweak pack?
Click to expand...
Click to collapse
reflash the cm10 rom file, it will overwrite this kernel.
cmahendra said:
can someone please make a tweak pack which can un-restrict the RIL installation? in such case we can test nightlies with various bb and ril combinations and find our own solutions for many many reports of voice call issues.
How can we use getril working or manually place ril file in appropriate place?
Click to expand...
Click to collapse
Arcee told us not to change the RIL.
Sent from my LG-P990 using xda app-developers app
I think the kernel modules are in the wrong folder.
It should be /system/lib/modules instead of/system/modules shouldn't it?
Sent from my LG-P990 using xda app-developers app
I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules
der.einstein said:
I have modified the update ZIP with the correct path. You can flash it to get wifi working again.
However remove the modules from /system/modules
Click to expand...
Click to collapse
A small error again it seems
This one I attached should work.
Thanks benee!
Will soon test and report.
ive tryed the fix pack by tonyp ics stock test rom
got no problems so far
tonyp rom seems to have better response after this tweak
Sent from my LG-P990 using xda premium
pidocchio said:
first of all thanks for sharing.
i'm using this with 26% of zRAM and interactive as cpu governor.
i don't see any particular difference for now, i will report better tomorrow after some daily use
can you add different i/o scheduler to this pack? like simple i/o, bfq, cfq, just to see if we can increase i/o speed.
EDIT: WiFi not working anymore It can't be enabled on 08/11 build.
Click to expand...
Click to collapse
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
der.einstein said:
After flashing the tweak pack my WiFi wont come on again.
I saw you put a wireless.ko inside the zip. Maybe something is wrong with it?
PS: I miss the conservative governor from stock CM10 already
Edit: I am also on nightly 1107
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.
Benee said:
To zram - DON'T touch the cm option. A script is included. To i/o scheduler. BFQ/CFQ are to complex imo. Noop is too simple. Deadline is the perfect mix (It's tweaked for flash storages). It's pretty cheap (cpu cycle) etc. So nope - not gona happen. However I think some other dev will start adding those stuff soon.
Could you please read the op? I'm doing this on a custom build: It's equivalent to the CM build tomorrow. So problems will occur This is why it's flagged as DEV. Currently there are big changes on daily basis. Not gona update this often, but on my Github you can find the source and add it to your own builds.
Click to expand...
Click to collapse
I did not offend you in any way. I am sorry if you feel so. I just thought to help others fix wifi quick without the need to reflash whole ROM.
Sent from my LG-P990 using xda app-developers app
Doubleshot Kernel v1.6
FIRST AND FOREMOST
**do this at your own risk**
READ FIRST
If you DO NOT own a VERIZON Galaxy Tab 2 7.0 SCH-I705 then DO NOT flash this! If you have not verified and flash this on a p31xx tab, something will break and I will not help you!
Features
Built from Samsung kernel source
1.52ghz, 1.62ghz or 1.70ghz Overclock versions!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Requirements
A *VERIZON* GALAXY TAB 2 7.0 SCH-I705
Root
Unlocked bootloader
CWM Recovery
Install
1. BACKUP!
2. Wipe dalvik cache
3. Flash in CWM Recovery
4. Reboot
5. Hit the THANKS button!
*I recommend using "System Tuner" from the Play Store.
Download v1.6 - 1.70ghz
a7f86b0afe3544e08c47b8e9a7315d9d
Download v1.5 - 1.62ghz
7c61153896e37b21bf43d6b128d10084
Download v1.1- 1.51ghz
49e8ad6378fd3eed4536b36e925a0b1b
Thanks
Scrosler for init.d and ADB root
All the others who've made rooting and modding Android possible!
Source
https://github.com/MrHyde03/android_kernel_samsung_espressovzw.git
Change Log
v1.6 2013-02-12
1.70ghz OC!
v1.5 2012-12-21
1.62ghz OC!
v1.1 2012-12-16
Initial Release
1.51ghz OC!
To Come
I will be adding more governors in the coming weeks.
This kernel should works on jb stock rom ?
Thanks a lot
Enviado desde mi GT-P3110 usando Tapatalk 2
fash99 said:
this kernel should works on jb stock rom ?
Thanks a lot :d
enviado desde mi gt-p3110 usando tapatalk 2
Click to expand...
Click to collapse
sch-i705 only!!
MrHyde03 said:
Features
Built from Samsung kernel source
1.5ghz Overclock!
init.d support
ADB root
Custom bootanimation.zip support
Governors
Interactive, Conservative, Powersave, OnDemand, Performance
Click to expand...
Click to collapse
NICE!
I just got my Verizon Galaxy Tab 2 7.0 and it already comes with the J1 rom and not the G3. I don't see anywhere on how to root this version of the rom. The only instructions to root is for the G3 rom. Appreciate any help. Thanks.
Sent from my SCH-i705 using xda premium
Follow step 1b in the root thread. You have to downgrade to g3 and then upgrade to j1 after.
Sent from my SCH-I535 using xda app-developers app
Kernel source?
Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app
1026 seems to be the lowest clock speed i can set
I can get to 384mhz, but I have noticed the minimun settings don't stick very well, but the maximum settings stick like glue. I've also noticed this on my S3. I'm not sure whats going on to be honest. I'll see if I can dig into it in the next few days. For now, though, I've noticed that you have to kinda play around with the minimum settings until it sticks, but it will stick eventually.
Working on cm 10.1?
Sent from my GT-P3110 using xda premium
MrHyde03 said:
Yes, the source Samsung released on their open source website.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.
cmenard said:
Guess I should have been more specific. Where's the link to your kernel source? It's a requirement on XDA.
Click to expand...
Click to collapse
Ah. Gotcha. I'll see if I can post it up today. Github keeps rejecting my push and I haven't figured it out yet.
tdawgg777 said:
1026 seems to be the lowest clock speed i can set
Click to expand...
Click to collapse
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:
Hi thanks for your great kernel.
I have two tablet 7p and 10.1p wifi it is possible for you to explain me or port this great kernel to tablet 10.1 wifi
.
I have Linux pc and if you help me for port this or create my kernel with your help.
Because forum tab 10.1 is dead ...
MrHyde03 said:
I'm using Kernel Tuner right now and it's working the best. Can set both cores independently or together. One thing I've notice though is go into settings and check "Prevent Changes from other apps". It says it's for HTC but it's working on my tab. If anybody has a good reason to not do so let us know :good:
Click to expand...
Click to collapse
i'll give kernel tuner a try
worked great thanks..
Sent from my SCH-i705 using Xparent ICS Tapatalk 2
I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...
MrHyde03 said:
I'm trying to push my source to github, but I keep getting this error:
error: RPC failed; result=22, HTTP code = 413
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
If I change it to SSH I get a "permission denied (publickey)" error... anyone have some advice? I'd like to get this pushed out...
Click to expand...
Click to collapse
Bro.. 1.5 is plenty. Any more then that ur asking for problems
Sent from my SCH-I535 using Xparent Blue Tapatalk 2
Hunterwu ICS Kernel(Sense)
Features:
Based on Official ICS kernel source code from HTC
2-way call records
Disable OC function for better power usage time(Default 245 - 1024MHz @ Ondemand)
Improved Stability/Ram usage(Ultra)/3D Game Performance(Tested with NFS 17 smooth like a butter:good: )
Tweaked Interactive governor
SmartassV2/conservation/usersapce/powersave/ondemand/performance governors
Deadline/CFQ/NOOP I/O scheduler
Full EXT4 Support
Support Sweep to wake/Sweep to unlock(Enable in Venom Tweak)
and more...
Click to expand...
Click to collapse
Compatible with:
All Sense 4 / 4A / 3.6 Rom (Not test on every Rom Please Report)>
Click to expand...
Click to collapse
Bugs:
Touch may has no respond sometime.You have to switch off your screen and turn it on in this case.
Click to expand...
Click to collapse
I am not the developer of this kernel.
Original Dev: Hunterwu You have to know that !
You can find the original post from here : http://bbs.joyrom.com/thread-27754-1-1.html
Click to expand...
Click to collapse
Install:
S-OFF User: Flash it via CWM
HTC Unlock User: Flash it via CWM then flash boot.img via adb
Click to expand...
Click to collapse
Download Link:
Attach Files
Click to expand...
Click to collapse
Use about a week....and yess its:good: with blackout rom...
Currently using beastmode, but downloading Hunterwu for review, give you my opinion tomorrow.
I am still facing the same issue with hunterwu where the screen randomly becomes unresponsive and the only resolution is to lock and unlock the screen and it works again. Got annoyed with it so went back to redux.
Sent from my HTC Incredible S using xda app-developers app
mohdsubaie said:
I am still facing the same issue with hunterwu where the screen randomly becomes unresponsive and the only resolution is to lock and unlock the screen and it works again. Got annoyed with it so went back to redux.
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
That is because s2w caused the touch unresponsive problem,no fix yet .
Sent from my HTC Incredible S using xda premium
Does not happen on redux even with sweep2wake
Sent from my HTC Incredible S using xda app-developers app
mohdsubaie said:
Does not happen on redux even with sweep2wake
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Yes..I know the dev of this kernel is checking this bug and trying to solve it
Thanks
Sent from my HTC Incredible S using xda app-developers app
working just gr8 with MIUI (**) .. battery life (** SUPERB) /
thank you /
Seems snappier than 2.03 I had before.. well done!
ARHD 4
SmartassV2
deadline
Sent from my HTC Incredible S using xda app-developers app
some firmware have bug:
1. Sometimes there may be errors in the screen while typing and unlock. On the official firmware this is not observed.
2. Sometimes there is an abnormal power consumption in standby mode, the power consumption can usually ranges from 3% to 4% in 6 hours, sometimes at the same time, power consumption can be up to 15%.
3. Problems with the volume
The first two bugs are described in kernel developer.
_Ma1k_ said:
some firmware have bug:
1. Sometimes there may be errors in the screen while typing and unlock. On the official firmware this is not observed.
2. Sometimes there is an abnormal power consumption in standby mode, the power consumption can usually ranges from 3% to 4% in 6 hours, sometimes at the same time, power consumption can be up to 15%.
3. Problems with the volume
The first two bugs are described in kernel developer.
Click to expand...
Click to collapse
Are you saying the issue might be in the custom Rom as opposed to the kernel?
Sent from my HTC Incredible S using xda app-developers app
mohdsubaie said:
Are you saying the issue might be in the custom Rom as opposed to the kernel?
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Yes, it has been confirmed by Chinese Forum/
PS: Yes, and just do the Chinese have a great Rom, which has better performance and fluency than posted in this forum, but here they are not allowed to post. I do not understand what's the point, because I think that we're all trying to make the perfect Rom. (sorry for my english)
_Ma1k_ said:
Yes, it has been confirmed by Chinese Forum/
PS: Yes, and just do the Chinese have a great Rom, which has better performance and fluency than posted in this forum, but here they are not allowed to post. I do not understand what's the point, because I think that we're all trying to make the perfect Rom. (sorry for my english)
Click to expand...
Click to collapse
Because their Rom are all base on virtuous Rom or others not base on ruu . Also many of them use venom tweaks and they don't have permission to use . That's why we can't post here because their Rom are not original developed.
Sent from my HTC Incredible S using xda premium
cycber said:
Because their Rom are all base on virtuous Rom or others not base on ruu . Also many of them use venom tweaks and they don't have permission to use . That's why we can't post here because their Rom are not original developed.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
So I am talking about this that they have finalized Virtuous Rom to the max, so why Virtuous can not take anything out of their rom and finally finish it?
nikant said:
Seems snappier than 2.03 I had before.. well done!
ARHD 4
SmartassV2
deadline
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
hmm.. got two random reboots in 5 days.. anyone else got that?
Sent from my HTC Incredible S using xda app-developers app
New hunterwu v3.02 has been uploaded
changes;
v3.02內核使用時，四个按键先别再设其他功能了，以免产生冲突....先用幾天沒問題後再去設別的功能
這樣才會比較好判斷是不是新版S2W(滑動開屏)引起的...望各位切記
請大家有開啟短信亮屏功能者，先把它關掉...這東西有可能跟滑動開屏起衝突
google translate : v3.02 kernel uses four buttons first stop set other functions, in order to avoid conflicts .... first few days, no problem and then set other function
Only in this way can the better judgment is not caused by the new version of S2W (sliding open the screen) ... hope to Remember
Please open the SMS bright screen functionality, first off ... this thing may open with sliding screen conflict
I dont speak chinese :laugh:, anyone can translate better please help.
I flash over miui .29 work flawlessly
kernel uses four buttons first stop set other functions, in order to avoid conflicts .... first few days, no problem and then set other function
Only in this way can the better judgment is not caused by the new version of S2W (sliding open the screen) ... hope to Remember
Please open the SMS bright screen functionality, first off ... this thing may open with sliding screen conflict
can we have an English translation
kernel broke my wifi on miui :s
butatx said:
New hunterwu v3.02 has been uploaded
changes;
v3.02內核使用時，四个按键先别再设其他功能了，以免产生冲突....先用幾天沒問題後再去設別的功能
這樣才會比較好判斷是不是新版S2W(滑動開屏)引起的...望各位切記
請大家有開啟短信亮屏功能者，先把它關掉...這東西有可能跟滑動開屏起衝突
[ /QUOTE]
After flashing v3.02 kernel ,do not set four buttons(menu.home.....) to other functions first ,it may cause some problems.
Try to use this kernel few days, if there is no problem and then you can set other function on them.
So that we can judge this bug was caused by new version of S2W or not.
Please turn off SMS screen on function ,this may cause problem with new version of S2W
I try to translate it smoothly
Sent from my HTC Incredible S
Click to expand...
Click to collapse