CyanogenMod 13.0 for Xiaomi Redmi Note 3 Snapdragon version
What works ?
Audio
Wifi
Bluetooth
Camera
RIL
GPS
FM
Fingerprint
What doesn't ?
Stuff that i might have not noticed
Changelogs :
02/09/2016
- Sync with latest CM ( includes off screen charging mode animation, default Hexalibre CM theme package,etc etc)
- Switched to newer radio blobs
- Other minor device cleanups
( Been hell busy & if i have time i will work on CM14 (android N), but at the moment i am not working and hence don't expect any immediate cm14 builds)
05/08/2016
- Sync with latest CM
- My non CM features retained as such
- Support for goodix fingerprint users ( Make sure to flash ROM followed by fp patch. Normal users for whom fingerprint used to work don't need to flash the patch)
- Loads of device cleanup
- Other minor improvements
Older Changelogs
18/07/2016
- Fix settings->security fc caused due to 15/07 build
15/07/2016
- F2fs implemented ( on /data and /cache ) => tested working
- Sync with latest cm
- Pokemon go mock location hack
- Other improvements
- Previous non CM features retained as such
05/07/2016
- Sync with latest CM
- GPS improvements
- Reduce headphone noise
- F2FS support is added (but i doubt it will boot[might be stuck in bootanim], as i didn't make a clean build) [ Try at your own risk if you know how to flash f2fs rom[you need a f2fs twrp recovery], if you don't know just flash ROM like always ]
- Previous non CM features retained as such
- Some cleanup and other performance improvements
Downloads:
Latest builds
For flashing the latest build which is based on M firmware checkout the guide here
If you face camera FC just flash this patch [ not applicable to f2fs users if they have switched to f2fs ]
Just a request to users :
Please don't mirror the ROM anywhere.Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2016-09-02
Created 2016-04-02
Last Updated 2016-09-02
Reserved
Thanks to the following donators :
@Tig3ro
@sffoxy
@FrozenMindXXIII
@gap30
@t3chs0l0
@dmahtani
@badm0j0
If someone wishes to thank for my work and donate, choose the option of services/goods in paypal ( as I am a Indian user ) and the donation will go through. [ The minimal withdrawal amount for paypal indian user is 10$. Just FYI. Lesser amounts than that get stagnated in the account until the paypal balance reaches 10$ ]
Wow! So fast) Thank you.
Good luck with the further work on ROM.
And the awesomeness begins!!
Can you release the device and vendor. I want to help you.
Gửi từ kenzo của tôi bằng cách sử dụng Tapatalk
Awesome, CM13 so quickly...!
Sent from my kenzo using Tapatalk
Good job.
Sent from my Redmi Note 3 using Tapatalk
Good job
Good job!!!
Keep up the good work!!!
Nice..
Sent from my Redmi Note 3 using Tapatalk
Nice! Good to see cm13 this early on this device, good luck with the development!
Shared this thread on Miui's forum, hope you don't mind.
Good Work
Sent from my Redmi Note 3 using XDA-Developers mobile app
Official?
Awesome! One step closer to the approval to get OFFICIAL CyanogenMod... (dreaming is free)
Can someone upload screenshots of this ROM?
Awesome!!! I knew it was a great idea to invest in a phone with a Snapdragon processor, Keep up the good work!
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
DrWillz said:
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
Click to expand...
Click to collapse
I am looking to fix that same "some reason"
Build.prop
Santhosh M said:
I am looking to fix that same "some reason"
Click to expand...
Click to collapse
Can you fix it editing build.prop?
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
yassineak47 said:
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
Click to expand...
Click to collapse
No it doesn't. You guys misunderstand how this works
For every piece of hardware in Android you need three things
A kernel driver (we have that), a matching hal for the system's API, and service / client software that interfaces with the hal
Sadly we are missing the hal
The only hal in existence is that of xiaomi but it's a selfcooked API which most likely needs some wrappers around it to work with stock 6.0 as it lacks user management
Whenever people say Android 6 has built in support for FP readers they mean that Google established a standard API for OEMs to build hals from.
That doesn't mean that all systems now magically start having their FP readers work
Related
CyanogenMod 14.0/14.1 for Xiaomi Redmi Note 3 Snapdragon version
Hi all,
This is a initial WIP cyanogenmod 14.1 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
CM related features or anything that's out of my scope and in CM scope
Goodix fingerprint should not be working ( not tested yet )
Stuff that i might have not noticed
Changelogs :
16/11/2016:
Sync with latest CM source (android_7.1.0_r7 and latest CM stuff)
Note : Cm has added Reliance jio apn by default now to their apn list and there seems to be a small bug related to this. So check your apn properly if data connection isn't working in Jio ( I had to modify APN type to default,supl on my personal usage)
Older Changelogs :
Note : I would recommend a clean flash of 05/11/2016 build as CM has database upgradation issue due to which you might face sim detection issue if dirty flashed
05/11/2016:
Sync with latest CM source.
Night display (accessed via quick tiles) is a addition from my end and is not a default CM feature
30/10/2016:
Initial CM14.1 release (please be noted that cm14.1 features might malfunction / totally nonworking )
Sync with latest CM
( VoLTE continues to work on a dirty flash if you were on my previous build) [ I just wiped cache and dalvik ]
17/10/2016 :
Sync with latest CM (some CM features work now)
Video recording should work fine now ( I recorded a couple of videos and captured few images. All look fine )
Initial blob level ( library support in ROM ) support for new camera sensors ( Kernel might still lack one or two new sensors )
Flac support
Improved device level performance
Other minor improvements
05/10/2016:
Sync with latest CM ( not much feature side, button backlight works nowthough)
VoLTE should now work out of the box. You don't need to flash tonnes of firmware zips ( Make sure you are clean flashing )
Camera fixes (Photo capture will work perfectly fine and won't crash anymore. Video recording is not still fully functional/functional totally)
Slightly improved performance and battery stability
Other misc changes
21/09/2016:
Sync with latest CM
Fixed the lags (device is smooth and normal now)
CM side issues such as external sd permission fixed ( fixed from cm side)
18/09/2016:
VoLTE support
Initial goodix support ( not tested yet and might be broken most likely. If u are going to test goodix flash my latest cm13 build and then come over to this rom )
Battery % bug fix ( -2%,50% thingy) [ I couldn't test because i have a older hardware]
Sync with latest CM
Minor improvements
13/09/2016 :
Sync with latest CM
Camera (photo capture) for other sensors
Night mode ( Access it from systemui tuner)
Should fix some performance issues ( make sure to switch to interactive after first boot)
other minor device level cleanups
Downloads:
Latest build (16/11/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14.1 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Beta Release Date: 2016-11-16
Created 2016-09-11
Last Updated 2016-11-16
Screenshots & other info
Reserved
Woow nice downloading
Reserved
Great work mate. Keep the good work going
Thanks a lot was waiting for it
---------- Post added at 08:53 AM ---------- Previous post was at 08:53 AM ----------
Will test and report
Will try soon thank youuu
Sent from my Redmi Note 3 using Tapatalk
thank you bro .....
Thanks for this Work, I will test soon !
@Santhosh M android.phone.com fc on few sims
HOW TO FLASH AND A QUICK REVIEW :
anyone flash? screenshot please...thx...
Thank you!
Reserved
Sent from my Redmi Note 3 using Tapatalk
Here is the step by step tutorial video on how to install ANDROID NOUGAT 7.0 on redmi note 3 with a quick review
https://youtu.be/x1Fo8hogOdU
nice
Reserved
Great news...
A little bit laggy, but it works! Very good job for being an alpha build...
Thanks and regards!!
Santhosh M said:
CyanogenMod 14.0 for Xiaomi Redmi Note 3 Snapdragon version
Hi all,
This is a initial WIP cyanogenmod 14 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera (only photo capture as of now, video rec is broken)
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
Video recording
Photo capture on some rn3 devices ( My kernel doesn't yet support all camera sensors and only supports initial batch as of now)
CM related features or anything that's out of my scope and in CM scope
Stuff that i might have not noticed
Downloads:
Latest build (11/09/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
Also you need to be on latest M firmware to flash the ROM.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Alpha
Beta Release Date: 2016-09-11
Created 2016-09-11
Last Updated 2016-09-11
Click to expand...
Click to collapse
Thank you man for your hard work.
Do you plan to release a device tree?
awesome!
Sent from my Redmi Note 3 using Tapatalk
Reserved
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 09:12 AM ---------- Previous post was at 09:11 AM ----------
tank0412 said:
Thank you man for your hard work.
Do you plan to release a device tree?
Click to expand...
Click to collapse
Obviously not?
Sent from my Redmi Note 3 using Tapatalk
[ROM][UNOFFICIAL][14.1] Lineage OS 14.1 by karevn, razziell and anomalchik. Nosgoth V3+ kernel
Code:
*** This build comes as-is without any support or warranty. Use it at your own risk.
Introduction
We were building this ROM for last 4 months and published it on 4pda.ru since Razziell refused to release his RR build here. Most of the work on this ROM is an unique product of @Razziell, @Anomalchik and @karevn efforts. To this moment, this build is most-popular and top-rated build on 4pda. I hope you'll enjoy it.
Installation instructions
* Install some TWRP
* Download ROM ZIP
* Copy ZIP to internal flash
* Boot to TWRP
* Install ROM
* Install fresh OpenGapps (pico build is recommended)
* Wipe cache/dalvik. Wipe data if you had other ROM before.
* Reboot
Click to expand...
Click to collapse
Download
Download
Click to expand...
Click to collapse
Have bug reports? Want to help a project
We're focused on building a quality ROM, and expect a certain level of commitment if you want to receive help. Please post all the problem reports and feature requests to the issue tracker: http://github.com/karevn/android_device_xiaomi_markw-RR
Changelog
Code:
Current changelog: 2017-01-08
[note] Intelligent CPU boost framework
[note] Re-tuned auto-brightness
[fix] Fixed LED HAL
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* [user=5661526]@Razziell[/user]
* [user=4683469]@Anomalchik[/user]
* @msdx321
* @HighwayStar
* @BratelloSlava
... and other contributors
XDA:DevDB Information
[UNOFFICIAL] Lineage OS 14.1 [karevn, razziell, anomalchik], ROM for the Xiaomi Redmi 4 Prime
Contributors
karevn, razziell, anomalchik
Source Code: http://github.com/karevn/android_device_xiaomi_markw-RR
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-12-31
Created 2018-01-08
Last Updated 2018-01-08
I am really sorry for spamming the section with excessive threads, but XDA was extremely laggy
vodo kernel not work
the audio does not work with the kernel vodo
eliasmovil said:
the audio does not work with the kernel vodoo
Click to expand...
Click to collapse
Yes.
I'll post a project roadmap and a kind of "support policy" in a couple of days to set expectations. Basically, all comes to "if you made any modifications - it's your decision and you can't expect any help". It's pretty... spartan-stylish, but after all we're focused on walking the walk, not talking the talk.
@karevn Thanx for your work on this Xiaomi forsaken phone, as well as all the other devs! I'm using the rom since about a week, very stable so far.The only problem i have with latest build is some "click" sounds when i'm talking on whatsapp on wifi, didn't test it with data or any other app till now.If anyone else having this problem i'll try getting a logcat, else i'll try a clean install first.
A small request, since it's unofficial, can we have a network monitor on the status bar?It's very useful in general.
And a question, is 2.2 ghz the maximum we can squeeze from this cpu?Can we reach 2.4-2.5 even at the cost of increased power consumption?I'll be happy to help in this direction since i have some experience.
karevn said:
I am really sorry for spamming the section with excessive threads, but XDA was extremely laggy
Click to expand...
Click to collapse
Man you made a mess I had to delete my projects to make you some ROOM! Good to see you here enjoy!
T3sla said:
@karevn Thanx for your work on this Xiaomi forsaken phone, as well as all the other devs! I'm using the rom since about a week, very stable so far.The only problem i have with latest build is some "click" sounds when i'm talking on whatsapp on wifi, didn't test it with data or any other app till now.If anyone else having this problem i'll try getting a logcat, else i'll try a clean install first.
A small request, since it's unofficial, can we have a network monitor on the status bar?It's very useful in general.
And a question, is 2.2 ghz the maximum we can squeeze from this cpu?Can we reach 2.4-2.5 even at the cost of increased power consumption?I'll be happy to help in this direction since i have some experience.
Click to expand...
Click to collapse
The main goal of this project is to provide a stable usable rom with smooth performance. So, I'll never integrate any bells, whistles or serious overclocking/undervolting. Snapdragon 625 is good as it is - fast and power-efficient with careful configuration.
On the WhatsApp thing - check if the is WhatsApp-specific or system-wide. If it's system-wide - post an issue at my github tracker.
Using your Rom for months now,
No major issues,
Happy you are here. :good::good:
eliasmovil said:
the audio does not work with the kernel vodo
Click to expand...
Click to collapse
Flash audio fix kernel. Thanks goes to @karevn
Karevn (and Razziell, and Anomalchik and others) THANKS ALOT for all your efforts!
I'm using your ROM since November if i remember correctly, and it is fantastic!
I'm even reading 4pda thread (translated by google) just to check your messages, updates and whatsoever!
This rom is fantastic, but i have to tune a bit because on MY Redmi (not on others, since i did not read anyting related in xda nor 4pda) i have spontaneous reboot.
I'm mitigating them using "interactive" CPU so i get about 1 reboot a day "only" (i even tryed to use only 3g or 4g). With impulse i have many reboots
With Voodoo Kernel i have no reboots. It seems some tweaks you did, don't work very well with just my own device
However with one of your rom/kernel it was all perfect (it was the one you gave us just without hotplug, about 2 months ago).
I know you are asking for logs, but it is just my device who has such problems, so i will not ask you to check just for me
Keep up the GREAT work and thanks alot!
karevn said:
[ROM][UNOFFICIAL][14.1] Lineage OS 14.1 by karevn, razziell and anomalchik. Nosgoth V3+ kernel
Introduction
We were building this ROM for last 4 months and published it on 4pda.ru since Razziell refused to release his RR build here. Most of the work on this ROM is an unique product of @Razziell, @Anomalchik and @karevn efforts. To this moment, this build is most-popular and top-rated build on 4pda. I hope you'll enjoy it.
Installation instructions
Download
Have bug reports? Want to help a project
We're focused on building a quality ROM, and expect a certain level of commitment if you want to receive help. Please post all the problem reports and feature requests to the issue tracker: http://github.com/karevn/android_device_xiaomi_markw-RR
Changelog
Thanks To/Credits
XDA:DevDB Information
[UNOFFICIAL] Lineage OS 14.1 [karevn, razziell, anomalchik], ROM for the Xiaomi Redmi 4 Prime
Contributors
karevn, razziell, anomalchik
Source Code:http://github.com/karevn/android_device_xiaomi_markw-RR
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-12-31
Created 2018-01-08
Last Updated 2018-01-08
Click to expand...
Click to collapse
how do i use Default System icon like RR in Lineage Os ??
ex : RR have Rounded Icon.Youtube Icon is equipped with white bordered whereas Lineage have just the Red YouTube icon. it contains no white bordered icon..
Emon330 said:
how do i use Default System icon like RR in Lineage Os ??
ex : RR have Rounded Icon.Youtube Icon is equipped with white bordered whereas Lineage have just the Red YouTube icon. it contains no white bordered icon..
Click to expand...
Click to collapse
It's the stock icon, without rounded edges.
Use Pixel Launcher for Pixel Icons
Sent from my Mi A1 using XDA Labs
Any of you need any translations or proofreading, just in case? I'm a frequent visitor on xda and an occasional visitor of 4pda and fluent in both languages. Would be glad to help.
Using this ROM right now, extremely stable, battery life is probably the best I've seen on markw - 12 hours later I still have over 50% and that's with a lot of usage including videos and music, OTAs actually work (are they pulled from the google drive? I'm just curious how someone managed to make it work on an UNofficial ROM, it's amazing) albeit only on the next day after the installation, only had one app crash a few times and I probably know the cause. Very smooth, LED works fine, no longer randomly reboots on low 2G signal or at all. No bloat or random apps I just don't use that other ROM devs force in there (some launcher - I either use the google one or Trebuchet, Substratum - I don't even use it at all, I much prefer the stock look, Xposed - If I really want/need it I'll rather install it myself). Generally very pleased to actually get rid of MIUI AND also have a fully functioning device running a ROM that doesn't need 10 fixes and a kernel flashed afterwards.
Thanks a lot for the efforts.
Big thanks for this Rom is the best what i have use! But i have onley one Problem. The LED dont works for any App. But wen i Charge my Phone IT works. I have Do a clean wipe install. Is there anywhat wat i can Do?
Gesendet von meinem Redmi 4 Prime mit Tapatalk
cheremenin said:
Any of you need any translations or proofreading, just in case? I'm a frequent visitor on xda and an occasional visitor of 4pda and fluent in both languages. Would be glad to help.
Using this ROM right now, extremely stable, battery life is probably the best I've seen on markw - 12 hours later I still have over 50% and that's with a lot of usage including videos and music, OTAs actually work (are they pulled from the google drive? I'm just curious how someone managed to make it work on an UNofficial ROM, it's amazing) albeit only on the next day after the installation, only had one app crash a few times and I probably know the cause. Very smooth, LED works fine, no longer randomly reboots on low 2G signal or at all. No bloat or random apps I just don't use that other ROM devs force in there (some launcher - I either use the google one or Trebuchet, Substratum - I don't even use it at all, I much prefer the stock look, Xposed - If I really want/need it I'll rather install it myself). Generally very pleased to actually get rid of MIUI AND also have a fully functioning device running a ROM that doesn't need 10 fixes and a kernel flashed afterwards.
Thanks a lot for the efforts.
Click to expand...
Click to collapse
Your help with English translations / proofreading is highly welcome! Please contact me on Telegram.
N1ck474 said:
It's the stock icon, without rounded edges.
Use Pixel Launcher for Pixel Icons
Click to expand...
Click to collapse
i use nova launcher & Rounded Edge is available on RR but Lineage hasn't . i want to turn Round Edge from Default in Lineage .
so, What Should i do ? any patches here ?
Emon330 said:
i use nova launcher & Rounded Edge is available on RR but Lineage hasn't . i want to turn Round Edge from Default in Lineage .
so, What Should i do ? any patches here ?
Click to expand...
Click to collapse
Use an icon pack with Nova.
Try this:
https://play.google.com/store/apps/details?id=com.themezilla.pixelui
Sent from my Mi A1 using XDA Labs
Is this one a good rom?
I looked on 4pda, but that looks like all russian.. don't understand at all.
Now im on the last xiaomi.eu built based on miui 9 , but MM, but i was looking to jump to nougat.
I had the aicp, and the RR, but between the few bugs of then, to me the worst has the lost of network cover.
How this version work? And agaisnt over Los built here, what have diferent?
Thanks
vrumvrum said:
Is this one a good rom?
I looked on 4pda, but that looks like all russian.. don't understand at all.
Now im on the last xiaomi.eu built based on miui 9 , but MM, but i was looking to jump to nougat.
I had the aicp, and the RR, but between the few bugs of then, to me the worst has the lost of network cover.
How this version work? And agaisnt over Los built here, what have diferent?
Thanks
Click to expand...
Click to collapse
This ROM is basically the base of all Nougat ROMs for Redmi 4 Prime...so if you're looking for the most stable for daily use, this is IT
Pixel Experience ROM for the Galaxy S9+ and the Galaxy S9
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 8.1
Click to expand...
Click to collapse
What's working?
Everything seems to be working; same as the official lineage build.
What's not working?
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS Pixel Experience. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS PixelExperience.
Click to expand...
Click to collapse
Instructions:
Make sure TWRP has been installed and functional.
Install the BRH4 vendor (not sure about the new(er) BRI1 vendor)
Download the latest build linked below
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs). Even better if you have nothing to loose and wipe system,data,cache,storage etc
Flash the latest build (and gapps). DONT flash gapps. they are already included in the rom.
Reboot and enjoy :victory:
Downloads:
Galaxy S9 Exynos (G960F/FDS/N): here
Galaxy S9+ Exynos (G965F/FDS/N): here
Providing feedback:
You are more than welcome to provide any kind of feedback here.
(limited only to feature requests; it's called "pixel experience" for a reason and it should stay that way)
You can also msg me anytime on telegram @ Rainbow_Alex_Dash
Changelog:
22.10.2018:
Complete kernel rebase on ELS
built with latest google's gcc
October security patch
source merge from the latest PE upstream
Other small bugfixes and improvments
16.09.2018:
Fixed "home button" wake function when device is in sleep
Merged latest 4.9 linux kernel changes.(huuge thanks to @saxmydix)
Merged latest pixelexperience upstream changes w september security patch
Rom now requres BRH4 vendor (i guess that's also a feature?)
other small performance/battery improvments
Troubleshooting/FAQ:
Q: The rom isn't booting/camera doesn't work
A: Flash/make sure you have the BRH4 vendor and try again.
Q: The rom is in a bootloop/google apps keep crashing
A: You did read the instructions and NOT flash any gapps riighhttt?? smh, wipe /system,/data and /cache and start over
Q: The "home button" isn't waking up the phone
A: This apparently is an issue when not clean-flashing. I posted a fix around page 3 detailing a fix for this.
Q: I have another bug; How can i tell it to you while slightly increasing my changes of it ever getting fixed.
A: You can tell me what's going on either here or on telegram WITH A LOGCAT attached(required);if rom isn't booting at all attach /proc/last_kmsg.
Q: I don't know what/how to logcat. Is it really necessary?
A: Logcat or gtfo
Q: How can i support you?
A: Awwww thanks; On most of my posts on the left side there's a "donate to me" paypal button; You can use that,donations are more than welcome, or if you don't have any $ to spare you can also post here about how awesome i am (this surprisingly helps very much)
Credits:
The lineageos team; device maintainers who did a wonderful job at creating device trees
The pixel experience team for creating the rom we so do enjoy
XDA:DevDB Information
Pixel Experience 8.1, ROM for the Samsung Galaxy S9
Contributors
Rainbow_Dash, jesec,farovitus
Source Code: [url]https://github.com/rainbowdashh[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: BRH4 vendor
Based On: AOSP
Version Information
Status: Stable
Created 2018-08-26
Last Updated 2018-10-22
Dowloading
sounds nice.
can you tell us which camera is included and how stable the cam is ..?
with kind regards
Alex-V said:
sounds nice.
can you tell us which camera is included and how stable the cam is ..?
with kind regards
Click to expand...
Click to collapse
It's the lineage camera;gcam doesn't work on aosp as i'd like to yet*; so that should do the job just fine.
As for stability and quality as far as i can see it's the same as it works on the lineage build: pretty stable and quality is fine* (passed my standards anyway)
downloading rn
I've added the link for the s9 variant. You guys now can enjoy this too.
Testers say it works but again, feedback is more than welcome
Working great on my s9+ . Trust me today only i tried the PE 8.1 gsi and it had a few issues and i am glad to see this rom created specifically for s9 and s9+ . Great work and thanks a lot!
Thanks for a great rom. Quick, smooth, excellent stuff!! Just wondering is substratum support included or could this be a future feature? Thanks again. ?
passion8059 said:
Thanks for a great rom. Quick, smooth, excellent stuff!! Just wondering is substratum support included or could this be a future feature? Thanks again. ?
Click to expand...
Click to collapse
Substratum theme works just fine.
I am using currently the Pi Light substratum theme without any errors.
Rainbow_Dash said:
I've added the link for the s9 variant. You guys now can enjoy this too.
Testers say it works but again, feedback is more than welcome
Click to expand...
Click to collapse
Using since you let me test it and no issues at all, camera working fine on BRF5 Vendor. Excellent work and same name in telegram ??
Thanks for sharing~
I hope this can help you...
https://forum.xda-developers.com/galaxy-s9/themes/google-camera-mod-galaxy-s9-sm-g960f-ds-t3772791
This Google Camera works well but slow motion on AOSP roms.
Thank you!
Going to flash this right now!
Edit: Love it! Awesome work Rainbow_Dash and thanks again for sharing!
could anyone please upload a BRE5 vendor file please
xstatik said:
could anyone please upload a BRE5 vendor file please
Click to expand...
Click to collapse
Here- mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
feimummy said:
Thanks for sharing~
I hope this can help you...
https://forum.xda-developers.com/galaxy-s9/themes/google-camera-mod-galaxy-s9-sm-g960f-ds-t3772791
This Google Camera works well but slow motion on AOSP roms.
Click to expand...
Click to collapse
Hmmmm
I'l have a look and i'l consider it
No promises tho
It seems to work from what i can see
There's a dark mode option under display in settings in the style tab that you can select as black in lineage os, so the pixels are turned off. I cant find this option on this rom, help? And is there any way to switch the navigation buttons?
Sorry for the "dumb" question, but does Magisk Hide works with this ROM? is the SafetyNet Check passed?
Thanks.
Hello. I can not load any of these roms on my galaxy s9 +, everyone is on the s9 + logo. What am I doing wrong ??
which vendor version is usable with this rom?
detdroid said:
which vendor version is usable with this rom?
Click to expand...
Click to collapse
Bre5 and brf3
---------- Post added at 05:59 PM ---------- Previous post was at 05:59 PM ----------
takichiman said:
Sorry for the "dumb" question, but does Magisk Hide works with this ROM? is the SafetyNet Check passed?
Thanks.
Click to expand...
Click to collapse
Yes.
#Chagenlong - 3.0
STOCK-BASED ROM DESIGN “J530GUBU6CSH5.”
FEATURES
ANDROID 9.0
SAMSUNG ONEUI V1.1
FULL STOCK APPS
DEBLOAT
DE-KNOX
ZIPALIGN
TWEAKS
RMM / KNOXGUARD - REMOVED
DPI 300
KEEPING THE J5PRO STANDARD SPECIFICATIONS
EXTRA RESOURCES
BUSYBOX
KERNEL HELIOS PIE 3.1
MAGISK 19.3
APPLOCK
BIXBYHOME
PRINT SCREEN
NATIVE SCREEN AND CALL RECORDER
MEMORYSAVER
MULTIWINDOWS PLUS
MULTIUSER
STATUS BAR SUPPORT - NETWORK SPEED
Attention: Not only responsible for problems or errors that may have occurred in your device, do everything at your own risk.
If you admire my projects and would like me to continue, be sure to click the like button and if possible leave a comment possible. also if a small donation is possible, it will encourage me to new projects. :fingers-crossed:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=GYVBYBQZ8VDFU&source=url
#Link: https://www.androidfilehost.com/?fid=1899786940962584493
Source Code:
https://github.com/ananjaser1211/Helios_7870
Kernel thread:
https://forum.xda-developers.com/gal...-v1-0-t3675500
XDA:DevDB Information
Fire Star UI, ROM for the Samsung Galaxy J5
Contributors
Flavio Rocha, ananjaser1211 @tutibreaker
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2019-09-12
Created 2019-05-22
Last Updated 2019-09-12
Flavio Rocha said:
Contributors
Flavio Rocha, ananjaser1211
Click to expand...
Click to collapse
Mate, I'm extremely curious to see the opinion of @ananjaser1211 about this project.
w41ru5 said:
Mate, I'm extremely curious to see the opinion of @ananjaser1211 about this project.
Click to expand...
Click to collapse
Hello friend, this project was fully developed by me. But it would not be possible without the Helios Kernel.
Good job mate! Looking forward for 2.0!
Flavio Rocha said:
This project was developed to provide a better experience for Galaxy J5 and J7 Pro users.
bringing enough fluidity and improvements in its interface. Based on the stock pie of the Galaxy On7 Prime.
#Chagenlong - 1.0
- Base Rom - G611FDDU1CSD8.
- ZipAlign.
- Debloat.
- De Knox.
- Removed RMM.
- Tweaks CSC.
- Tweaks Build.prop.
- Added Game Home and Game Tools.
- Added S Secure.
- Added Plan Energy S.
- Added Wallpapers of A10.
- Added Media Audio System A10.
- Added Call Recorder and Native Screen Recorder.
- Added Magisk 19.2.
- Added Kernel Helios Pie 3.1.
#Erros
Because it is a port there are small errors in the Fire Star system, such that I can only correct in version 2.0!
- Speaker Error - The Speaker is 75% functional, but there are errors. When placing the call on speakerphone does not work, the main speaker does not come out as loud and fluid as in the stock rom.
- Game tools - Unfortunately it is not working, until the moment I do not know the reason. However, I will seek a solution.
- Rádio - Radio is also not functional.
Attention: Not only responsible for problems or errors that may have occurred in your device, do everything at your own risk.
If you admire my designs, be sure to click the liking and share button.
Consider also the possibility of making a donation, this will be encouraging me to continue my projects :fingers-crossed:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=GYVBYBQZ8VDFU&source=url
#Link: https://www.androidfilehost.com/?fid=3556969557455274191
XDA:DevDB Information
Fire Star UI, ROM for the Samsung Galaxy J5
Contributors
Flavio Rocha, ananjaser1211
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-05-22
Created 2019-05-22
Last Updated 2019-05-22
Click to expand...
Click to collapse
Any plan for a new base? with Advances ScreenShot?
Can you add Blue Light Filter, Palm Swipe to ScreenShot , AOD, Advanced ScreenShot, Bixby Vision and the Overlay to enable Gestures/NabBar ?
Rom is fast =)
Build.pro is setting the resolution of J7 PRO as 656 instead of 411
Touch Protection doesnt work too
Port
Hi, I have a Samsung Galaxy J5 2017 and I see your One UI rom for this SM-J530F. I would like (if its possible) to know how do you do to port some roms cutoms ??? You can contact me on Telegram here :
h|t|t|p|s|:|/|/|t|.|m|e|/|r|b|n|y|e|l|l|o|w
NOTE : you have to delete the "|" for the url because xda don't want without 10 posts
LuanTeles said:
Can you add Blue Light Filter, Palm Swipe to ScreenShot , AOD, Advanced ScreenShot, Bixby Vision and the Overlay to enable Gestures/NabBar ?
Rom is fast =)
Build.pro is setting the resolution of J7 PRO as 656 instead of 411
Touch Protection doesnt work too
Click to expand...
Click to collapse
Hi friend, I'm resting right now. so I'm not working on roms projects right now. but soon I will work on a 2.0 version.
Detail, I can not add AOD or Navbar.
LuanTeles said:
Any plan for a new base? with Advances ScreenShot?
Click to expand...
Click to collapse
At the moment no friend, I'm resting. :Boa:
Essa rom é para j5 prime sm-570m
Junior Pontes said:
Essa rom é para j5 prime sm-570m
Click to expand...
Click to collapse
friend, just for J5 Pro and J7 pro.
Hi guys, how are you today my name is Vicente, I am a blind person and I want to ask my brother to help me install this rom that developed in this forum, my question is compatible with SM-J530G single SYM
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
excuse my ignorance I just want to be sure nothing else, well guys thank you very much
Vichito Informático said:
Hi guys, how are you today my name is Vicente, I am a blind person and I want to ask my brother to help me install this rom that developed in this forum, my question is compatible with SM-J530G single SYM
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
excuse my ignorance I just want to be sure nothing else, well guys thank you very much
Click to expand...
Click to collapse
Hello friend, Yes! This project is compatible with all variants of J5 pro or J7 pro. :fingers-crossed:
What about you guys, here Vicente, is already installed at this moment and in my life. keep going
Lock screen stories, doesnt work
Great Job
Very stable and smooth so far in my J530F
Thank you and keep it up
I installed yesterday, first impression is that it is very fast and smooth.
Very fast and stable, no battery drain or overheating, compared to some other Pie ports for J5. Only thing I've noticed is that my charger gets a bit hotter while charging, but it could maybe be from the charger side, I'm not sure, or it could have something to do with this being from J7 which has larger capacity resulting in some issues with power intake while charging. Anybody else had this issue?
Second Pie Rom for J5 and second time I have default notification sound (skyline) instead snapchat provider sound. Anyone knows how to fix it?
Prospeedy22 said:
Second Pie Rom for J5 and second time I have default notification sound (skyline) instead snapchat provider sound. Anyone knows how to fix it?
Click to expand...
Click to collapse
Wtf
Rapid OS 8.0 for Redmi Note 3 Pro [kenzo/kate]
What is AOSP ROM?
An AOSP ROM is a ROM based on the Android Open Source Project. In the purest sense, AOSP refers to unmodified ROMs or code from Google
About Rapid OS:
Rapid OS is a pure stock android experience, much like the pixel devices, with a lot of under the hood tweaks, which optimize the specific device to unleash it's fullest capability, be it in terms of performance, battery, or stability.
It does not come with any bloatware at all, and comes only with the apps you'd find on a pixel.
Code:
#include
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth (buggy sometimes)
FMRadio (buggy sometimes)
FPC Fingerprint
Lights
Sound / vibration
IR
Known issues
Goodix fingerprint
Extras
Pixel colors
Pixel Launcher
INBUILT GAPPS
GCAM
Backlight on hardware keys
Credits
Thanks to all who have helped me (directly or indirectly), especially to these guys: @xyyx, @billchen1977,@akhilnarang, @GreekDragon, @abhishek987, @ jhenrique09 (Based on his aosp rom only).
@ jhenrique09 AOSP 8.0 for kenzo: https://forum.xda-developers.com/redmi-note-3/development/rom-aosp-oreo-t3664605
Disable HWKeys and enable navbar (don't install in another ROM, because it will not work):
https://www.androidfilehost.com/?fid=889764386195926971
SOURCE: (Built upon @jhenrique09 AOSP 8.0 for kenzo/kate: https://forum.xda-developers.com/redmi-note-3/development/rom-aosp-oreo-t3664605).
Pls post logs of any bugs that you may have!
NOTE: I'm Currently working on android pie based Rapid OS. Pls support the development guys!!
XDA:DevDB Information
Rapid OS, ROM for the Xiaomi Redmi Note 3
Contributors
shivaay1234
Source Code: https://forum.xda-developers.com/redmi-note-3/development/rom-aosp-oreo-t3664605
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest TWRP and firmware, Unlocked bootloader
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-11-07
Created 2019-11-07
Last Updated 2019-11-07
Links
Sorry for the delay in uploading the links. They'll be up right here, in about an hour.
EDIT: Links updated!
https://drive.google.com/drive/folders/1-0FycnVRg68vtjcXQC1U_xOvUuHFIoMk?usp=sharing
Download the rom and the bootfix from the above link.
FLASH INSTRUCTIONS:
1) Wipe system, data, cache, dalvik cache.
2) Flash the ROM zip only (Don't add anything to the queue).
3) Flash the BOOTFIX.
4) Don't flash GAPPS (it's already there).
5) Reboot and enjoy!!!
NOTE: The rom takes quite a while to install, so please be patient.
Wow, tried this rom. It's really epic. Just the best balance between performance, battery and stability. I want you to make the pie rom. Please continue the hard work. Your rom makes my device feel new. The scrolling in this rom is just insane! Feels like a oc'd display! Thanks for the great work mate.
---------- Post added at 12:05 PM ---------- Previous post was at 11:59 AM ----------
This is what "stock" means. Many guys give their roms saying it's "stock", but have all sorts of customisations and ****. But this one has none of those, and i love it. Pure stock android makes my device feel like a pure pixel. Thanks again dev
EDIT: This rom comes with gcam as the stock camera app, and it is just lit??
Will wait for pie version. Can someone please provide screen shots? Thanks again for keeping this device alive. XD
Soojikahalwa said:
Will wait for pie version. Can someone please provide screen shots? Thanks again for keeping this device alive. XD
Click to expand...
Click to collapse
The model number says SM-G955F, Cuz i installed the vulkan activator on my device too. The rom is epic man. I think you should give it a try even though it's Oreo.
will wait on pie
---------- Post added at 11:46 AM ---------- Previous post was at 11:46 AM ----------
Will wait on pie
Divyeshj66 said:
The model number says SM-G955F, Cuz i installed the vulkan activator on my device too. The rom is epic man. I think you should give it a try even though it's Oreo.
Click to expand...
Click to collapse
Why's the security patch so old?
Soojikahalwa said:
Why's the security patch so old?
Click to expand...
Click to collapse
It's the initial build of not only oreo, but rapid OS, so didn't think about that. Sorry. Anyway, the future builds, and the pie build will come with the latest security patch. Did you like the ROM though?
shivaay1234 said:
It's the initial build of not only oreo, but rapid OS, so didn't think about that. Sorry. Anyway, the future builds, and the pie build will come with the latest security patch. Did you like the ROM though?
Click to expand...
Click to collapse
This is the best. Loved it. Gonna keep using it until the pie version releases. Please make it happen.
anyone using this for 2gb / 16gb kenzo? review please
Divyeshj66 said:
The model number says SM-G955F, Cuz i installed the vulkan activator on my device too. The rom is epic man. I think you should give it a try even though it's Oreo.
Click to expand...
Click to collapse
2017 Security Patch? Whoat
Ya_SG said:
2017 Security Patch? Whoat
Click to expand...
Click to collapse
Dude, if you want to use it use it, else leave. I already said why this happened
Android 10
Are you guys fine, if I stop work on the pie based ROM, in order to get the 10 based ROM faster? I can only work on one of them...
shivaay1234 said:
Are you guys fine, if I stop work on the pie based ROM, in order to get the 10 based ROM faster? I can only work on one of them...
Click to expand...
Click to collapse
I would rather like to get Android 10 as there are several Pie ROMs already.
shivaay1234 said:
Are you guys fine, if I stop work on the pie based ROM, in order to get the 10 based ROM faster? I can only work on one of them...
Click to expand...
Click to collapse
Go toward 10
shivaay1234 said:
It's the initial build of not only oreo, but rapid OS, so didn't think about that. Sorry. Anyway, the future builds, and the pie build will come with the latest security patch. Did you like the ROM though?
Click to expand...
Click to collapse
Please don't be sorry buddy, thanks for keeping the device alive. I was just wondering why the patch is old as seen from the screenshot. I don't have a clue about developing. I was just curious. I appreciate you doing this for our redmi note 3. I have just shifted to Aex pie by Amol Amrit. Will try this out after a while, I'll let you know what I think about the ROM when I do. Thanks again.
Android 10 development
Hi guys. As requested by many people, I have started working on the 10 build. It might take a while to fix all the bugs. If you guys just want to test out the builds and are fine with the bugs, you can PM me. The test builds will be available from next-week hopefully. Thanks for the support guys:good::good:
codergenius said:
anyone using this for 2gb / 16gb kenzo? review please
Click to expand...
Click to collapse
Yes buddy, I'm using it on my 2gb ram variant of kenzo. Runs really well ram management is much better than the pie ROMs. And since it is absolutely pure android, with pixel goodies, I love it...
---------- Post added at 12:31 PM ---------- Previous post was at 12:31 PM ----------
shivaay1234 said:
Hi guys. As requested by many people, I have started working on the 10 build. It might take a while to fix all the bugs. If you guys just want to test out the builds and are fine with the bugs, you can PM me. The test builds will be available from next-week hopefully. Thanks for the support guys:good::good:
Click to expand...
Click to collapse
Thanks bro. We'll keep supporting you??
shivaay1234 said:
Hi guys. As requested by many people, I have started working on the 10 build. It might take a while to fix all the bugs. If you guys just want to test out the builds and are fine with the bugs, you can PM me. The test builds will be available from next-week hopefully. Thanks for the support guys:good::good:
Click to expand...
Click to collapse
But you can make a telegram group instead and post the beta builds there, so that people can test the builds and help you isolate the bugs.
Ya_SG said:
But you can make a telegram group instead and post the beta builds there, so that people can test the builds and help you isolate the bugs.
Click to expand...
Click to collapse
K. will do that.