Hi guys,
For those who have Huawei P8 Lite ALE-L02 DUAL SIM, here is the official Android 6.0 update.
Versions that can be upgraded are ALE-L02C636B150 and ALE-L02C636B522.
http://consumer.huawei.com/tw/mobile-phones/support/downloads/p8-lite-tw.htm
Instructions for sdcard are included into the package.
Otherwise you can also follow this instructions posted here on XDA.
Enjoy your Android 6.0!
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Dual sim?
legendarryl said:
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Click to expand...
Click to collapse
I think you can't because your build is different. If you try, you can break your phone.
Only phones with C636B150 and C636B522 builds can update.
Sheshanxt said:
Dual sim?
Click to expand...
Click to collapse
Yes.
Sheshanxt said:
Dual sim?
Click to expand...
Click to collapse
I was also confused but if you look on pdadb.net, there are 7 devices linked to Huawei P8 Lite:
ALE-L04 Dual SIM LTE
ALE-L02 Dual SIM LTE
ALE-L21 Dual SIM LTE
ALE-L23 Dual SIM LTE
ALE-CL00 Dual SIM TD-LTE
ALE-TL00 Dual SIM TD-LTE
ALE-UL00 Dual SIM TD-LTE
I would give a link, but I am not allowed yet
legendarryl said:
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Click to expand...
Click to collapse
Ale-l02 doesn't support nfc so i can't update using versions for ale-l21.
For ALE-L02 there aren't any 6.0 versions yet.
VladHD said:
Ale-l02 doesn't support nfc so i can't update using versions for ale-l21.
For ALE-L02 there aren't any 6.0 versions yet.
Click to expand...
Click to collapse
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=80850 Compatibility: One of the following builds is required to be running on your device in order to be able to support this update.
ALE-L02C636B150
ALE-L02C636B522
Hello,
Maybe another link, the first one is very low
Thanks for all
jemsgaelle said:
Hello,
Maybe another link, the first one is very low
Thanks for all
Click to expand...
Click to collapse
http://www.carbontesla.com/2016/05/...l02-b530-marshmallow-firmware-asia/#more-6156
Downgrade
Can I down grade back to ALE-L02C636B150 from ALE-L02C636B530
Thanks
i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...
Darkwell_Habridge said:
i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...
Click to expand...
Click to collapse
you cant do an local update while you have twrp installed. if it's bricked -> unbrick it.
Lordbannakaffalatta said:
you cant do an local update while you have twrp installed. if it's bricked -> unbrick it.
Click to expand...
Click to collapse
the phone is unlocked....ya i tried the local update...then the phone restarts automatically and twrp is opened...n then no where to go...
what bout brick.,..how to know that whether the phone is bricked or not..
Darkwell_Habridge said:
the phone is unlocked....ya i tried the local update...then the phone restarts automatically and twrp is opened...n then no where to go...
what bout brick.,..how to know that whether the phone is bricked or not..
Click to expand...
Click to collapse
a brick is what we call when a device won't boot into android anymore.
if you still can boot into recovery it's nothing to worry about you have a softbrick.
you installed twrp. that's your problem.
download the offical build you're on now and extract it.
download Huawei extractor and install it
select the update.app (the large one) from your downloaded build in huawei extractor.
rgiht click on recovery.img and select extract this
after that install miimal adb and fastboot.
boot your phone into bootloader (connect with pc then power it on while holding volume down button pressed until you see a white screen with the android puppet on)
put the recovery.img that you extracted in the adb and fastboot folder
open up a cmd window and type
Code:
fastboot devices
you should get something like
Code:
list connected devices
blablabla
is thats the case put int this
Code:
fastboot flash recovery recovery.img
wait ill its done and try to do a local update again by putting your update in a dload folder on your device and booting into recovery and do a force update.
it should work.
for the files... just google them.
Lordbannakaffalatta said:
a brick is what we call when a device won't boot into android anymore.
if you still can boot into recovery it's nothing to worry about you have a softbrick.
you installed twrp. that's your problem.
download the offical build you're on now and extract it.
download Huawei extractor and install it
select the update.app (the large one) from your downloaded build in huawei extractor.
rgiht click on recovery.img and select extract this
after that install miimal adb and fastboot.
boot your phone into bootloader (connect with pc then power it on while holding volume down button pressed until you see a white screen with the android puppet on)
put the recovery.img that you extracted in the adb and fastboot folder
open up a cmd window and type
Code:
fastboot devices
you should get something like
Code:
list connected devices
blablabla
yup there we go with android 6....after installing the stock recovery.img, everything went on smoothly....THANK U Lordbannakaffalatta... really appreciated ur help..:good:
Click to expand...
Click to collapse
Is Marshmallow Available already on ALE-L02C635B140?
The OTA-Update finds nothing and all the instructions say, that it should be possible for ALE-L02 but not for B140. Why not?
Thank you
EDIT:
I think i found the answer: I have to wait for the OTA Update from B140 (New Zealand)
:/
Any idea how do I get rid of the balong bug for the ALE-L02?
Anyone knows if spanish language is included in these update?
do you have firmware for lumiere 503HW its the japanese P8 lite my build no. is ALE-L02C111B200 please help i want to go back to stock.
Hello! I have ALE-L02C636B150 on my phone, but i'm from Serbia. Will i have any problems if i install the update and i'm not from Asia? This ROM has English and other European languages?
Related
NEW Full ROM
Date: 2015-9-17 Version: P7-L10C02B817 Android 5_EMUI3.1 Vodacom File Size: 1.15 GB
Link download:http://consumer.huawei.com/za/support/downloads/detail/index.htm?id=52987
Lindo gracias bro ???????
Is it a beta ? Or Final ?
Ok
Don't have error of the 815.... And I probe the battery in this moment.. tell later !
I flashed Stock B609 CWM then used the dload UPDATE.APP method to flash this update
I use Vodacom and I am from South Africa
Dont know if that helps, but it went successfully for me!!
Hope it works for you!!!
danielproenca said:
I flashed Stock B609 CWM then used the dload UPDATE.APP method to flash this update
I use Vodacom and I am from South Africa
Dont know if that helps, but it went successfully for me!!
Hope it works for you!!!
Click to expand...
Click to collapse
Hey there Daniel! I'm on the Vodacom network as well. Could you please tell me what your cust version is? Maybe you can take a screenshot? I don't see a cust version on mine.
rodlane said:
Hey there Daniel! I'm on the Vodacom network as well. Could you please tell me what your cust version is? Maybe you can take a screenshot? I don't see a cust version on mine.
Click to expand...
Click to collapse
On B817 my Custom Version is CUSTC02D710
Build: P7-L10C02B817
danielproenca said:
On B817 my Custom Version is CUSTC02D710
Build: P7-L10C02B817
Click to expand...
Click to collapse
Do you have VENDOR UPDATE.APP of CUSTC02 version?
majcomtech said:
Do you have VENDOR UPDATE.APP of CUSTC02 version?
Click to expand...
Click to collapse
There isn't a vendor.img or update.app. Does anyone have one of these for any lollipop version?
rodlane said:
There isn't a vendor.img or update.app. Does anyone have one of these for any lollipop version?
Click to expand...
Click to collapse
Some released firmware has UPDATE.APP for vendor. In can be found in folder named "Part 2". Inside of it you can find the file with a capacity of 17.9 kb. Hoping that Vodacom released it somewhere.
majcomtech said:
Some released firmware has UPDATE.APP for vendor. In can be found in folder named "Part 2". Inside of it you can find the file with a capacity of 17.9 kb. Hoping that Vodacom released it somewhere.
Click to expand...
Click to collapse
The Turkish version of b619 has it. I tried using it before and it works on 3.0. I modified it to get onto cust 432. I tried it now again but it doesn't work for 3.1.
rodlane said:
The Turkish version of b619 has it. I tried using it before and it works on 3.0. I modified it to get onto cust 432. I tried it now again but it doesn't work for 3.1.
Click to expand...
Click to collapse
I know it has. But we need CUSTC02 to get this firmware B817 work for non Vodacom user. 432 or 433 and etc. wont make this firmware work normally except having CUSTC02. This firmware can be used by Vodacom user only normally without having CUST error during installation.
majcomtech said:
I know it has. But we need CUSTC02 to get this firmware B817 work for non Vodacom user. 432 or 433 and etc. wont make this firmware work normally except having CUSTC02. This firmware can be used by Vodacom user only normally without having CUST error during installation.
Click to expand...
Click to collapse
turkish vendor from B619
https://mega.nz/#!HUZ0SBbT!gSdOH9ge1h3MtT4ioTcsPyzH1ND2z4Uv0QzKDsHOFyc
haninatoon said:
turkish vendor from B619
https://mega.nz/#!HUZ0SBbT!gSdOH9ge1h3MtT4ioTcsPyzH1ND2z4Uv0QzKDsHOFyc
Click to expand...
Click to collapse
Boot loop on 619. It will locked bootloader.
majcomtech said:
Boot loop on 619. It will locked bootloader.
Click to expand...
Click to collapse
how come , it is original vendor , I tested it before
I am unlocked bootloader officially from huawei
Sent from my HUAWEI P7-L10 using XDA Free mobile app
haninatoon said:
how come , it is original vendor , I tested it before
I am unlocked bootloader officially from huawei
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Anyway, no problem about bootloader locked. I kept my unlocked code. But, still not working on B817. Still we need CUSTC02.
It's not so much of an issue from what can see. I did a factory reset and restored all my apps and data to see what happens. Still the same except that I now have LTE. Still no cust. If you have a look at the cust folder for our network, you'll see that there are masses of applications that will automatically install, all of which I am not partularly interested in. All I am interested in is the fact that everything runs and runs more smoothly than any other version I have used before, and there are no visible bugs so far
rodlane said:
It's not so much of an issue from what can see. I did a factory reset and restored all my apps and data to see what happens. Still the same except that I now have LTE. Still no cust. If you have a look at the cust folder for our network, you'll see that there are masses of applications that will automatically install, all of which I am not partularly interested in. All I am interested in is the fact that everything runs and runs more smoothly than any other version I have used before, and there are no visible bugs so far
Click to expand...
Click to collapse
I totally agree with @rodlane .... this build is almost bug free .... only navigation bar hide option is not there .... and the battery is good .... i use 3g network all the time so it doesn't last long but no more mediaserver issues and no more heating ...... also with the built in lollipop battery saver function it is better then ever but huawei has hidden it dunno why but This app opens it :laugh::laugh:
Guys please help me I'm stuck on b800 after downgrading from b817, now I can't upgrade nor downgrade to kitkat..every rom file I flash it fails on 2%..I'm running stock firmware not rooted...
After several days finding ways how to successfully install B817 without CUST error, finally I made it. Now by playing the Vendor CUSTC version, I finally managed to change my vendor version to CUSTC02.
Honor 4x in bootloop.
Recovery and dload update not opens/works.
Please share Kitkat B180 full firmware (Cherry-L04_V100R001C900B180_Firmware_India) if anyone has, as Honor removed this from its website, and help revive phone.
Fastboot mode is working.
B180 Firmware is needed since phone was on this version before it started to bootloop.
search huawei firmware finder team mt. you can manually search for the version you wnat
Searched in firmware finder team's android app, Honor 4x Kitkat CHE1-L04 B180 firmware is not available.
I have it, but tell me how can I give it to you? It's around 1 GB.
neerajksw said:
I have it, but tell me how can I give it to you? It's around 1 GB.
Click to expand...
Click to collapse
Please upload in Google drive.
Your Honor 4x problem solved ?
If you don't want the phone data and so on, you can enter fastboot and directly flash img files from any ROM you got.
jerryhou85 said:
If you don't want the phone data and so on, you can enter fastboot and directly flash img files from any ROM you got.
Click to expand...
Click to collapse
Flashed other version ROMs extract of recovery, boot, system & userdata, phone still in bootloop. Some versions recoveries' give dtb not found error.
Found version of the phone by command : fastboot oem get-build-number
oppili said:
Please upload in Google drive.
Your Honor 4x problem solved ?
Click to expand...
Click to collapse
Yes its solved by Service center.
I will upload to google drive and give you link.
Requesting to upload recovery first
neerajksw said:
Yes its solved by Service center.
I will upload to google drive and give you link.
Click to expand...
Click to collapse
Please upload recovery.img first, I will check if it is enough. Sorry for late request if you have commenced uploading.
oppili said:
Please upload recovery.img first, I will check if it is enough. Sorry for late request if you have commenced uploading.
Click to expand...
Click to collapse
Here is the link for Recovery.img for Honor 4x Che1-L04 from Android 4.4.4 Kit Kat Flipkart
https://drive.google.com/file/d/0B6FfzGBa7G6MY1FxNG12YTBhYXc/view?usp=sharing
Let me know if you want any other partition image for it like boot.img etc.
You can ask me some things about Honor 4x, i have done plenty of experiments with it.
Other files are needed
neerajksw said:
Here is the link for Recovery.img for Honor 4x Che1-L04 from Android 4.4.4 Kit Kat Flipkart
https://drive.google.com/file/d/0B6FfzGBa7G6MY1FxNG12YTBhYXc/view?usp=sharing
Let me know if you want any other partition image for it like boot.img etc.
You can ask me some things about Honor 4x, i have done plenty of experiments with it.
Click to expand...
Click to collapse
Flashed recovery by fastboot. Problem not solved. Still in bootloop.
Please upload B180 - firmware zip, will extract with huawei update extractor. Sorry for troubling you.
oppili said:
Honor 4x in bootloop.
Recovery and dload update not opens/works.
Please share Kitkat B180 full firmware (Cherry-L04_V100R001C900B180_Firmware_India) if anyone has, as Honor removed this from its website, and help revive phone.
Fastboot mode is working.
B180 Firmware is needed since phone was on this version before it started to bootloop.
Click to expand...
Click to collapse
Did you get the firmware ?? i have same problem
oppili said:
Honor 4x in bootloop.
Recovery and dload update not opens/works.
Please share Kitkat B180 full firmware (Cherry-L04_V100R001C900B180_Firmware_India) if anyone has, as Honor removed this from its website, and help revive phone.
Fastboot mode is working.
B180 Firmware is needed since phone was on this version before it started to bootloop.
Click to expand...
Click to collapse
Why you are searching (Cherry-L04_V100R001C900B180_Firmware_India) just go for the new version (Che1-L04, Android 6.0, EMUI 4.1, C675B520, India), it will work Download
Urgent help needed
neerajksw said:
Here is the link for Recovery.img for Honor 4x Che1-L04 from Android 4.4.4 Kit Kat Flipkart
https://drive.google.com/file/d/0B6FfzGBa7G6MY1FxNG12YTBhYXc/view?usp=sharing
Let me know if you want any other partition image for it like boot.img etc.
You can ask me some things about Honor 4x, i have done plenty of experiments with it.
Click to expand...
Click to collapse
Bro plz help me out, I have installed CM 13 on my honor 4X everything works fine except the memory card , it always shows memory card corrupted. Now I want to revert back to the stock rom , I tried flashing it to through ADB but everytime is shows ( Remote size too large ). Pl suggest what should I do , I tried every thing but no sucess..
shady143 said:
Why you are searching (Cherry-L04_V100R001C900B180_Firmware_India) just go for the new version (Che1-L04, Android 6.0, EMUI 4.1, C675B520, India), it will work Download
Click to expand...
Click to collapse
Can't flash Lollipop or Marshmallow firmwares (already tried) due to size differences.
requesting honor 4x che1-l04 firmware
Bro can you uplode honor 4x b180 firmware on google drive. If you can plz give me the link i really need it
ogs876 said:
Bro can you uplode honor 4x b180 firmware on google drive. If you can plz give me the link i really need it
Click to expand...
Click to collapse
Give me the original link . I wil make u mirrors for where ever u wish
Still in Bootloop, do not have B180
ogs876 said:
Bro can you uplode honor 4x b180 firmware on google drive. If you can plz give me the link i really need it
Click to expand...
Click to collapse
Still in bootloop, if you get it please share link
----------------------------------------------------------------------------
Try flashing b180 recovery in this thread
oppili said:
Still in bootloop, if you get it please share link
----------------------------------------------------------------------------
Try flashing b180 recovery in this thread
Click to expand...
Click to collapse
B180 recovery is not working . At huawei service center the told me to unlock bootloader but i dont have product id for it. Also they told me its software error as i have flashed twrp without unlocking bootloader.i Have mailed the details to honor customer care.lets hope they find any soln.but if anyone has soln plz give it. I really want my mobile back.
ogs876 said:
B180 recovery is not working . At huawei service center the told me to unlock bootloader but i dont have product id for it. Also they told me its software error as i have flashed twrp without unlocking bootloader.i Have mailed the details to honor customer care.lets hope they find any soln.but if anyone has soln plz give it. I really want my mobile back.
Click to expand...
Click to collapse
Can i know if the bootloader is locked or unlocked?
[Guide] Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat "Updated 25.03.2018"
[Guide] Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat
This thread will be discontinued, because Huawei refuses to provide unlock codes in the future, because of security reasons.
A shame that after the support end of the device it will be quite useless, cause you don´t get any security updates and have no chance to make secure again, by flashing someting else.
I recommend you not buy any Huaweidevices in the future cause of that.
Here´s my P10 Guide, the steps are the same for the P10 Plus: Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat
Just use the following files for the P10 Plus instead:
TWRP for P10 Plus
@AndroidFilehost: HWOTA_VKY-L29C432_B365.zip (Oreo) MD5: 0858c05a98053ad5043dfaf7041ec54e
@Mega: HWOTA_VKY-L29C432_B360.zip (Oreo)
@Mega: HWOTA_VKY-L29C432_B177.zip (Nougat)
Doesn't work on a converted single sim UK P10 plus to dual sim. Used this method to go back to B123 to get the phone to work. It was showing a different model number each time I tried to update to B177 using this method.
abdulhamid1978 said:
Doesn't work on a converted single sim UK P10 plus to dual sim. Used this method to go back to B123 to get the phone to work. It was showing a different model number each time I tried to update to B177 using this method.
Click to expand...
Click to collapse
Did you already use this method before? Seems you messed up with the 1 of the 3 updatefiles. Especially the update_all_hw.zip which is only for the l29 or l09.
Did you try to update via firmware finder and did you make check with imei in that tool? That should fix your problems, if you use the FullOTA.
LwannaCM said:
Did you already use this method before? Seems you messed up with the 1 of the 3 updatefiles. Especially the update_all_hw.zip which is only for the l29 or l09.
Did you try to update via firmware finder and did you make check with imei in that tool? That should fix your problems, if you use the FullOTA.
Click to expand...
Click to collapse
The FULLOTA in firmware finder says 'The firmware is not approved for installation'.
I have VKY-L09C432 which I converted to VKY-L29C432 and was on B170. I used the 3 update files from the the link you provided in step 2 'HWOTA_VKY-L29C432_B177.zip'. Was I supposed to change any of these files?
abdulhamid1978 said:
The FULLOTA in firmware finder says 'The firmware is not approved for installation'.
I have VKY-L09C432 which I converted to VKY-L29C432 and was on B170. I used the 3 update files from the the link you provided in step 2 'HWOTA_VKY-L29C432_B177.zip'. Was I supposed to change any of these files?
Click to expand...
Click to collapse
No, i think you just haven´t read the guide carefully. In firmwarefinder choose an older one, that is approved for installation.
LwannaCM said:
No, i think you just haven´t read the guide carefully. In firmwarefinder choose an older one, that is approved for installation.
Click to expand...
Click to collapse
I am back on L29C432B170 via normal OTA.
Probably messed up on 2. Run the update.bat file from a preopended CMD with adminrights, It will ask you if you copied the files. Press any key to continue.
I just ran update.bat file as an administrator. That was the only thing I did differently to the guide.
Hello guys!
So I recently bought a "Huawei P10 Plus VKY-AL00 6GB RAM 128GB Dual-Sim" from China. I want to rebrand this model to "Huawei P10 Plus VKY-L29 6GB RAM 128GB Dual-Sim". Ive unlocked bootloader. So what shall I do now ? This tutorial above is for the european model. Please help me thx!
No connection to the mobile network after rebranding
Hi
I went through all your described steps and everything worked fine. However, I've got a strange problem.
I have different SIM cards available (multiple mobiles), but only one (prepaid from croatia) is working after the procedure. The ones from Vodafone Germany and Swisscom do not work.
They work fine on other mobiles. Everything else is working fine on the P10+. The SIMs not working, are displayed in the phone, but will not connect to the mobile network of any provider.
No available networks are listed. Both SIM-slots tested.
Any idea, where the problem could come from?
Thanks for your help.
how to convert VKY-L09C432 dual sim to single sim?
Sorry for stupid question. I'm having VKY-AL00 with B217 firmware. I guess soon I will update it to Oreo. Am I still capable for rebranding?
yukato said:
Sorry for stupid question. I'm having VKY-AL00 with B217 firmware. I guess soon I will update it to Oreo. Am I still capable for rebranding?
Click to expand...
Click to collapse
You can still rebrand, but AL00 is already dual sim if that's what you were after.
---------- Post added at 10:05 PM ---------- Previous post was at 10:03 PM ----------
Gamkutopolowk said:
how to convert VKY-L09C432 dual sim to single sim?
Click to expand...
Click to collapse
There's a walkthrough for using HWOTA to rebrand to the L29 model: https://forum.xda-developers.com/p1...nvert-to-dualsim-huawei-p10-plus-vky-t3605071 Works very well, changed my Fido/Rogers L09 without any issues. The instructions can be a little confusing but you should be ok if you've flashed phones before.
singularoctopi said:
You can still rebrand, but AL00 is already dual sim if that's what you were after.
Click to expand...
Click to collapse
I'm thinking to go from chinese to european firmware may be The reason is I can't turn my location history ON in Google Maps And It seems I'm still having some notification problems.
TWRP not working
Hi,
I can't get TWRP to work on my VKY-L29. Everytime I try to get in TWRP, I get into the normal Huawei recovery again. Phone's Bootloader is definitely unlocked and it also says that writing the TWRP was sucessful. I followed all the steps as they're written. Any thoughts on how to fix this?
Rommco05 said:
Unplug phone from cable and turn off. Turn on with holding vol up+power button, when u feel vibration release power button and vol up
Click to expand...
Click to collapse
when I do that i get to the screen saying: phone is unlocked an can't be trusted... If I then prss volume up to enter TWRP I still get into the Huawei eRecovery.
I have p10 plus VKY-L09 with C55B140 (Tim IT brand) and with firmware finder i check for C432B175 and firmware finder say it's aproved for installation...
So, it's fine to update/instal?
bondaru18 said:
I have p10 plus VKY-L09 with C55B140 (Tim IT brand) and with firmware finder i check for C432B175 and firmware finder say it's aproved for installation...
So, it's fine to update/instal?
Click to expand...
Click to collapse
I don't know what to tell you...I got firmware finder as well but my latest update was 2 days ago and now i got B177.The chinese phones already got Oreo update (yesterday,two days ago). I recomand you to not update yet,use HiSuite and connect your phone to your pc.I did get B170 using the cable and having installed on my pc HiSuite,so good luck.
Hello,
Tried following the guide but now my phone VKY-L09 shows up as a NRD90M with 2GB of RAM. followed the procedure many times now but still with the same results.
Doing the rebrand seems to work (if i do it twice on the update script it shows VKY-L29C432 but after booting up it still is NRD90M.
I can boot to fastboot/twrp/erecovery without issues.
Used this file HWOTA_VKY-L29C432_B177.zip
I am from Portugal and only need for the phone to have Dual Sim
Mike69pt said:
Hello,
Tried following the guide but now my phone VKY-L09 shows up as a NRD90M with 2GB of RAM. followed the procedure many times now but still with the same results.
Doing the rebrand seems to work (if i do it twice on the update script it shows VKY-L29C432 but after booting up it still is NRD90M.
I can boot to fastboot/twrp/erecovery without issues.
Used this file HWOTA_VKY-L29C432_B177.zip
I am from Portugal and only need for the phone to have Dual Sim
Click to expand...
Click to collapse
Guys I really need some help on this please. It's the only phone I have.
Mike69pt said:
Guys I really need some help on this please. It's the only phone I have.
Click to expand...
Click to collapse
Had a similar issue. Got round it by following this guide to rebrand then used the firmware finder app to install the latest available vky-l29 update. After that I unlocked bootloader again and flashed twrp and installed magisk.
baddesthad said:
Had a similar issue. Got round it by following this guide to rebrand then used the firmware finder app to install the latest available vky-l29 update. After that I unlocked bootloader again and flashed twrp and installed magisk.
Click to expand...
Click to collapse
Could you please give me some more details on how to do this? When i rebrand using this guide and boot it's got the nrd90m
Service firmware Emui 9.1 PE C432 huawei p smart(2018) + root Magisk
This is the fig lx Emui 8 firmware on fig lx EMUI9.1 location c432 9pe.android.
Downloading the firmware, unpack the necessary files into the DLOAD folder. And put the folder with the firmware on the DLOAD sd card. Turn off the phone: hold down + - and turn it on after vibration, watch the firmware process. After the firmware, a hard reset will occur, and the boot loader is locked (before the firmware, make sure that stock recovery is in place)
Download firmware :
download
Installing root. Unlock bootloader, install
TWRP
..
We will need:
Magisk manager installed on the phone. RECOVERY_RAMDIS.img pulled from UPDATE.APP firmware How to patch stock recovery: We go in tel. in Magisk manager click Install Select patch file We are looking for our RECOVERY_RAMDIS waiting for the end (the path is specified after completion) magisk_patcher.img. The path of the phone memory folder Download If twrp with encryption, our patched file is transferred to our magisk_patcher.img.
1.We go to TWRP, if twrp is not in the Erecovery section, then we flash it into erecovery through img. (Wish) images.
2. We are patching our patched stock recovery to the recovery section.
3.We do through Twrp a reboot in recovery to start the root (it will not go into rekoveri already) With EVERY boot, if we want to root, we boot into the recovery (volume + when turned on), when rebooting, Magisk Manager does this automatically. Route received. What works: Full root, Magisk Hide and everything connected with it including Google Pay, as well as eRecovery What does not work: It is impossible to install a stock recovery, which means that to update the system you need to flash the native recovery, update it, and then do the procedure again.
Ready patched Stock recovery flash in RECOVERY section for C432 9.1.0.115
Download patched: download
Download Magisk : download
Already come updates on the C432, wait, or check through applications Hicare Norway choose a country.
Sorry for the English, Greetings from Belarus, from the forum 4p da. #mak6021
Is this for 2018 or 2019 model?
harry_turtle said:
Is this for 2018 or 2019 model?
Click to expand...
Click to collapse
2018
So, can I use this firmware to upgrade from emui8 to emui9?
tissa_ said:
So, can I use this firmware to upgrade from emui8 to emui9?
Click to expand...
Click to collapse
Yes
will this work on C782?
punteruk said:
will this work on C782?
Click to expand...
Click to collapse
Try, but I do not guarantee, firmware for c432
Hello is this beta or full release ?
0ckysaurus said:
Hello is this beta or full release ?
Click to expand...
Click to collapse
Official firmware, not beta.
What is the language of the rom?
lecortes said:
What is the language of the rom?
Click to expand...
Click to collapse
Multi-language firmware all languages.
mak6021 said:
Official firmware, not beta.
Click to expand...
Click to collapse
where you find this firmware?
javadoverall said:
where you find this firmware?
Click to expand...
Click to collapse
androidhost
This is the official firmware. Do not doubt
:angel:
mak6021 said:
androidhost
This is the official firmware. Do not doubt
:angel:
Click to expand...
Click to collapse
same body tested for another model.. like fig la1..?
Are you think answer for another model
javadoverall said:
same body tested for another model.. like fig la1..?
Are you think answer for another model
Click to expand...
Click to collapse
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
mak6021 said:
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
Click to expand...
Click to collapse
why?
Hi.
If I do not want to root my cell phone. What should I do for this?
freeuser00 said:
Hi.
If I do not want to root my cell phone. What should I do for this?
Click to expand...
Click to collapse
Download only the firmware but it will lock your bootloader
How does rooting keep the bl unlocked?
I have a FIG-LX1 that I rebranded to C432 and I patched NVME to unlock Bootloader
Can I and how do I re unlock the bootloader on Emui 9
And how to I downgrade to Emui 8
Thanks in advance
Can someone create a mirror? Download max reached...
This tool will help you upgrade from EMUI 9.0 to EMUI 9.1 .
Requirements:
- Unlocked Bootloader
- A rooted device (if you don't have root use the TWRP EMUI_9.1_Flasher tool.Bootloader unlock is required))
- ADB Debug enabled
- A PC with Windows OS
- EMUI 9.1 FullOTA firmware
- Ability to follow some simple on-screen instructions
Credits:
@ante0 - for the new Pie based no-check recovery --> you should thank him here
all the others that contributed to this tool
Instructions:
- Download and extract the tool
- Connect your device to the PC and make sure ADB Debugging it's enabled
- Launch the Flash.bat
- Follow the on-screen instructions
Download
EMUI9.0_to_9.1_update_tool.zip
EMUI9.0_to_9.1_update_tool_root.zip -- This version will also install Magisk 19.3 Stable - Magisk Manager it's optional and can be skipped
EMUI_9.0_to_9.1_update_tool_root_3_files.zip -- This version will allow you to flash the base firmware,cust and preload.Obviously,you can skip the Magisk part if you want
TWRP EMUI_9.1_Flasher -- This tool won't require a rooted device
EMUI_9_0_TWRP_Flash_Unbrick_Tool.zip -- Use this tool to flash an EMUI 9.0 firmware if your device is soft bricked and is no longer booting to EMUI OS
Firmwares Collection :
BLA-L29 C432 - 9.1.0.300 - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019/post79923909
BLA-L09 C432 - 9.1.0.300 -> https://forum.xda-developers.com/showpost.php?p=79932379&postcount=14 <- base firmware it's the same as BLA-L29
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
syd-3 said:
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
Click to expand...
Click to collapse
Hi! I don't know which version it's fine for your device and the only way to know it it's to flash it yourself, but i don't recommend you to do that.
Rooting with Magisk is fine on 9.1, just read the latest posts from this thread - > https://forum.xda-developers.com/mate-10/how-to/guide-magisk-root-mate-10-pro-t3886967/page27
As for the roll-back, ut should be possible to do it with this tool and an appropriate roll-back firmware (again, firmware version might depend on your cust/brand).
I recommend you to keep an eye and also read this thread - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
tokoam said:
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
Click to expand...
Click to collapse
B303 is not for A09, it's for C800 which is some jp cust.
Most new fw links are not up yet, and since Huawei decided to name all their firmware the same regardless of model its hard to know which is which :/
Success! Updated BLA-L29C432. Thank you!
Krasimir said:
Success! Updated BLA-L29C432. Thank you!
Click to expand...
Click to collapse
Great! Soon i will upload a new version that will also flash the patched Magisk ramdisk_recovery and Magisk Manager (this one will be optional, so those who already have it, can skip it).
It worked for me also.
Why is root needed? Unlocked bootloader is not enough?
criszz said:
Why is root needed? Unlocked bootloader is not enough?
Click to expand...
Click to collapse
Nope! Well, it can be done without root too, but it would require twrp in that case.
Firmware for Bla-l09c432 ?
MagicBox96 said:
Firmware for Bla-l09c432 ?
Click to expand...
Click to collapse
Somewhere on Huawei's servers! xD
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
MagicBox96 said:
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
Click to expand...
Click to collapse
as stated before, since every update is named the same it's hard to tell which is L09, L29, A09 or AL/TL. AL/TL are easier as VERSION.mbn in UPDATE.zip doesn't have Global strings in it.
From what it seems, if you flash L09 on L29 or vice versa you get endless OTA updates for preload and cust. I don't know if just flashing the cust and preload zips fixes it, but you're free to try if you want.
Here's L09 preload and cust:
Preload: http://update.hicloud.com:8180/TDS/...full/update_full_preload_BLA-L09_hw_eu_R1.zip
Cust: http://update.hicloud.com:8180/TDS/...4//f1/full/update_full_cust_BLA-L09_hw_eu.zip
modified tool to include preload and cust:
https://mega.nz/#!oDR2DYCI!SRQlTq1IriGcEt1Wr--ggrBk7uZ4M_R8OwE6DdvmEEc
Extract and put in the EMUI 9.0 to 9.1 update folder.
Rename cust zip to update_cust.zip and preload to update_preload.zip, put in ZIPS-HERE folder, run modified bat.
Thank you very much, I try very soon. Have any of you done that already?
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
I did on L29 with L29 preload and cust, no problems.
Base (280955) seem to be the same for both L09 and L29 C432.
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
Soon i will upload a new tool that will let you flash all the 3 files, so you could wait. Also, a fried of mine is testing on BLA-L09 C432.
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
MagicBox96 said:
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
Click to expand...
Click to collapse
Tool updated. However, if you don't have root, you can't use it, you must root first.
Okay, I thought it was a tool like the ones we made earlier to install EMUI 9. I'll wait until the new tool is released. : D