Huawei P8 Lite Ale - L02 Marshmallow - P8lite General

Firmware release 16/5/2016
Official website for ale l02: consumer.huawei.com/tw/support/downloads/detail/index.htm?id=80850
Extract
Copy the update.app to DLOAD folder (SD CARD STORAGE)
Normal Upgrade / Local Update
DONE.
PS: Copy the url since im new. :good:

Has anyone tried this? Any feedback with performance and battery drain?
Sent from my ALE-L02 using XDA-Developers mobile app

My unit is l02 too. So far no lags and delay plus Good battery drain. "depends how you use your phone".

Battery is shorter for me (could be some Rogue app like Facebook)
Performance is much better, no more memory leak
Some UI annoyances fixed, like material navigation bar, Camera settings animation lag
Battery settings is worse, too many unnecessary sub-menus
Still no Music Equalizer, but there's a new DTS sound effect which enhances audio quality on good head/earphones
Overall its an update I highly recommend!!!

Has anybody found a successful root method for this build?

Can you update straight to this? I'm on B140 in New Zealand. Cheers

XOtago said:
Can you update straight to this? I'm on B140 in New Zealand. Cheers
Click to expand...
Click to collapse
The following versions can be upgraded:
ALE-L02C636B150
ALE-L02C636B522

Thanks for the prompt reply, well those two aren't mine. So I'll have to wait for the nz update lol
Cheers anyway

XOtago said:
Thanks for the prompt reply, well those two aren't mine. So I'll have to wait for the nz update lol
Cheers anyway
Click to expand...
Click to collapse
Try searching this phrase to google..
Ex. L02 Based in TAIWAN.
to google - Huawei (Unit Based) Support
Then go to download sections or search for download sections / updates. :good:

i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...

Darkwell_Habridge said:
i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...
Click to expand...
Click to collapse
You need stock recovery and be unrooted to update OTA. You need to download from the links above and side load onto your phone.

Does anyone have a link to all the stock rom's?

Related

Android 5.1.1 EMUI 3.1 all apps crash after update

After I updated my sisters phone to EMUI 3.1 (android 5.1.1) the phone became pretty much unusable. Even after reinstalling all apps or a factory reset, apps keep crashing. E.g. facebook loads up and is usable but just freezes after a few seconds and then crashes. Already contacted Huawei but no luck. Does anyone have tips, or should we just wait for the next update to patch things up? Thanx in advance
matje103
It happened the same to me! Nothing is working right now. Google chrome, the alarm, facebook, youtube, everything crashes! I made a hard reset and installed the apps again but nothing to do!
How can I fix the problem and have my beautiful phone back?
Shame on Android 5, I want go back to Android 4.4.2!
Please help!
Marco
Factory reset and don't install facebook app.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Guys, i have the same probçem with my p7. Everything worked propperly before the update D:
I looked everywhere but nobody seem to have an answer, i think we will have to wait till the next update
Same for me
Same problem for me, after the update, Google Play Services threw an error, I cleaned that apps cache and performed a reboot, after which that problem seemed to be solved. However some apps (especially the facebook one), just freezes when scrolling through the app
Hopefully this can be resolved quickly, as the phone was operating just fine before the update.
i have the same problem after 5.1.1 update.
the phone crashes all the time..
any sugestions?
Same problem here. After update several apps freeze while using. Especially facebook, alarm (clock) and the speach messages on WhatsApp. We have tried wiping the cage and factory reset already. Device is not rooted and runs stock firmware, update was ota.
I have that problems too, please help.
Even before crashing, fb videos doesnt load...
I tried wipe partition reset, which seems it has wirked on note 4, but for ne it hasn t worked
Same problem here... all apps get frozen after a few seconds (Facebook, Instagram, Snapchat...) and even the alarm or internal apps are not working well. When do you think it will arrive a new update?
I hope they will release a new update or patch soon. My girlfriend's smartphone is quite useless now.
Same problem here!
Well my phone is not crashing, tho it did just a few times maybe in 2 weeks. Nothing too serious. But it is a little bit buggy, and kinda slow. Hope they fix all this
Matje103 said:
After I updated my sisters phone to EMUI 3.1 (android 5.1.1) the phone became pretty much unusable. Even after reinstalling all apps or a factory reset, apps keep crashing. E.g. facebook loads up and is usable but just freezes after a few seconds and then crashes. Already contacted Huawei but no luck. Does anyone have tips, or should we just wait for the next update to patch things up? Thanx in advance
matje103
Click to expand...
Click to collapse
I have the same problem. Somebody in XDA is helping me to fix it. I don't know if is possible but I'll paste the chat with the instructions in here. I'm about to start the process, maybe it helps you.
Quote:
Originally Posted by RafaB
Hi guys, I upgraded my Huawei P7 to B832 and Emui 3.1 but I can root it. Can I do this procedure to install the version B805 and try to get it rooted?
-When i installed this version, i couldn't change theme, I hadn't keyboard installed, there wasn't application updater. It is the same for you?
-Yes. It's the same. How did you fixed it? I really appreciate your help!
Nothing, i did a force update to B800 and then to B621 because miss the app updater. Now i'm on 830 and still waiting a real stable beta..
-Sorry but I'm learning about this Android world. Can you tell me how did you do this force update to B800, please?
Force update is a different way to start the update. So, download B800, extract the update.app file on PC (no on file manager of the phone because then don't work), after that create a folder called "dload" and put the UPDATE.APP file here. Turn off your phone and press vol+, vol- and power buttons all together, in this way will start the process of upgrade( or downgrade like this). before restart of phone the dload folder with update.app inside has to be put on the root of the sdcard or the internal storage..
RafaB said:
I have the same problem. Somebody in XDA is helping me to fix it. I don't know if is possible but I'll paste the chat with the instructions in here. I'm about to start the process, maybe it helps you.
Quote:
Originally Posted by RafaB
Hi guys, I upgraded my Huawei P7 to B832 and Emui 3.1 but I can root it. Can I do this procedure to install the version B805 and try to get it rooted?
-When i installed this version, i couldn't change theme, I hadn't keyboard installed, there wasn't application updater. It is the same for you?
-Yes. It's the same. How did you fixed it? I really appreciate your help!
Nothing, i did a force update to B800 and then to B621 because miss the app updater. Now i'm on 830 and still waiting a real stable beta..
-Sorry but I'm learning about this Android world. Can you tell me how did you do this force update to B800, please?
Force update is a different way to start the update. So, download B800, extract the update.app file on PC (no on file manager of the phone because then don't work), after that create a folder called "dload" and put the UPDATE.APP file here. Turn off your phone and press vol+, vol- and power buttons all together, in this way will start the process of upgrade( or downgrade like this). before restart of phone the dload folder with update.app inside has to be put on the root of the sdcard or the internal storage..
Click to expand...
Click to collapse
Sounds interesting! Were you successful with this instructions? Has the phone to be rootet? Where did you get the b800 file? And which Android version did you have in the end? I'm a little confused because you mentioned B805, B800 and B621...
the steve said:
Sounds interesting! Were you successful with this instructions? Has the phone to be rootet? Where did you get the b800 file? And which Android version did you have in the end? I'm a little confused because you mentioned B805, B800 and B621...
Click to expand...
Click to collapse
Unfortunately I couldn´t "downgrade" the EMUI version from 3.1, but I could change from B832 to B830. Still can't get root access. For now, I'm gonna try this version and if I find something wrong, I'll try to change to B800 (as transitional rom) and go back to B621, as the instructions above.
RafaB said:
Unfortunately I couldn´t "downgrade" the EMUI version from 3.1, but I could change from B832 to B830. Still can't get root access. For now, I'm gonna try this version and if I find something wrong, I'll try to change to B800 (as transitional rom) and go back to B621, as the instructions above.
Click to expand...
Click to collapse
OK, I don't want to root the phone or install a custom recovery, because my girlfriend doesn't want to void her warranty. I'm just looking for a way to reverse the last update and get back to the stock android version before, because with the last update she got lots of problems with her phone.
Deinstall facebook app, use facebook in browser that will fix the crashes
MrBreadMan said:
Deinstall facebook app, use facebook in browser that will fix the crashes
Click to expand...
Click to collapse
Meh... not very helpful. It is not just facebook, also other apps have problems. It is no solution not to use any apps anymore.
the steve said:
Meh... not very helpful. It is not just facebook, also other apps have problems. It is no solution not to use any apps anymore.
Click to expand...
Click to collapse
My wife's phone after upgrade to B830 has some problems but the one most critical is with the audio service.
If you turn off sound, vibro or total silence, sound does not work at all, even after you turn it back on.
When you enter ringtone choosing settings you can't get out, phone stucks, you can't go to alarm clock, also - you are stuck here, nothing works, you can't change alarm time etc...
Phone calls make no sound, just vibro. Only way to get out of this is to reboot a phone.
Can i fix it without doing full factory reset?

New upgrade Android 5.1.1 for P8

For those using beta B191 you can upgrade to B350. This is an excellent version, simply the best existing ROM today for our P8.
Remember: You have to be in B191 to upgrade.
Download is here: https://mega.nz/#F!bwQgUCAL!sYcyIO20Lmnv4bxnGX-5lA
Create a /dload folder on your microSD and copy UPDATE.ZIP (do not unzip it) into this folder and apply upgrade localy from "Settings" "Updates"
NFC bug existing in B191 is over. All bugs I had found in B191 are also gone. Battery is also better. I believe this will be the first official 5.1.1 version released first to betatesters.
I'm using it since November 13th and it's just fantastic. Enjoy it.
PS: TouchPlus is not available in this version.
This is interestng, can you provide pictures of your battery stats?
mirost1 said:
This is interestng, can you provide pictures of your battery stats?
Click to expand...
Click to collapse
The graphics provided by my phone can help me but not others because everybody uses their P8s different.
I get a bit more than two days with 5 hours 20 minutes screen but all depends how you have configured your phone and what applications you use.
What I can tell you for sure, battery drain is better controlled than with B191 which was good already.
ArtZ said:
The graphics provided by my phone can help me but not others because everybody uses their P8s different.
I get a bit more than two days with 5 hours 20 minutes screen but all depends how you have configured your phone and what applications you use.
What I can tell you for sure, battery drain is better controlled than with B191 which was good already.
Click to expand...
Click to collapse
Im at B200 can i upgrade anyway?
Sorry fast read. I need 191 first.
bihslk said:
Im at B200 can i upgrade anyway?
Sorry fast read. I need 191 first.
Click to expand...
Click to collapse
Nope, you must go first to B170 (full ROM) and the B191 and B350 (both partial OTA updates). Here you have all what you need:
B170: http://download-c.huawei.com/download/downloadCenter?downloadId=49884&version=118243&siteCode=hu
B191: http://dl.free.fr/vYjCHxg8K
B350: https://mega.nz/#F!bwQgUCAL!sYcyIO20Lmnv4bxnGX-5lA
As usual, you create a /dload folder in your microSD card and you put inside UPDATE.APP (B170) and UPDATE.ZIP (B191 & B350) uncompressed (zip file) and you do a local update from "Settings"
P8 gra-ul00
Is this ROM compatible with GRA-UL00 version ?
khaled_agamy said:
Is this ROM compatible with GRA-UL00 version ?
Click to expand...
Click to collapse
NOPE is only for GRA-L09 as B170 and B191 besides GRA-UL00 has no NFC either (See first post)
ArtZ said:
Nope, you must go first to B170 (full ROM) and the B191 and B350 (both partial OTA updates). Here you have all what you need:
B170: http://download-c.huawei.com/download/downloadCenter?downloadId=49884&version=118243&siteCode=hu
B191: http://dl.free.fr/vYjCHxg8K
B350: https://mega.nz/#F!bwQgUCAL!sYcyIO20Lmnv4bxnGX-5lA
As usual, you create a /dload folder in your microSD card and you put inside UPDATE.APP (B170) and UPDATE.ZIP (B191 & B350) uncompressed (zip file) and you do a local update from "Settings"
Click to expand...
Click to collapse
Thanks man. I downgraded to B170 and Updated to B191 then , Updated to B350 WORKS like a charm. Thanks again
i have a problem! at first I was on b120 from Vodafone I decided to install b170, I installed b170 and after that I installed the 18kb file from the CUSTOM folder. finally I reinstalled b170 and everything was working fine and without any error. But I am not able to install b191 it always gives me an error at 3% I decided to install b200 and everything is working properly. But I´m very interested in Lollipop 5.1.1 although i can´t install it!! do you know what could be the problem! thanks!!!
pd: I also tried to downgrade from b200 to b170 and i tried again... but nothing.. and I installed the 18kb file on b200 too.
javitraver said:
i have a problem! at first I was on b120 from Vodafone I decided to install b170, I installed b170 and after that I installed the 18kb file from the CUSTOM folder. finally I reinstalled b170 and everything was working fine and without any error. But I am not able to install b191 it always gives me an error at 3% I decided to install b200 and everything is working properly. But I´m very interested in Lollipop 5.1.1 although i can´t install it!! do you know what could be the problem! thanks!!!
pd: I also tried to downgrade from b200 to b170 and i tried again... but nothing.. and I installed the 18kb file on b200 too.
Click to expand...
Click to collapse
Questions:
1. Did you unzip UPDATE.ZIP? You should NOT unzip UPDATE.ZIP
2. How do you install B191? You should do it locally, from Android "Settings" menu. Not using the three buttons because it's a partial update.
To go back from B200 to B170 you have to do it using the three buttons method (*), not locally.
Everything will be fine if you follow these instructions?
(*) Three buttons method (Force upgrade/downgrade)
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically.
bihslk said:
Thanks man. I downgraded to B170 and Updated to B191 then , Updated to B350 WORKS like a charm. Thanks again
Click to expand...
Click to collapse
I know. It's the best ROM today.
the mobile radio active bug is gone in 5.1.1?
sorin8181 said:
the mobile radio active bug is gone in 5.1.1?
Click to expand...
Click to collapse
I've never noticed this problem, so you can install B350 and tell us. When everyone contributes, forums are richer
ArtZ said:
I've never noticed this problem, so you can install B350 and tell us. When everyone contributes, forums are richer
Click to expand...
Click to collapse
What he means is - in 5.0 roms there is a Mobile Standby/Mobile Radio On bug which is a big battery drainer...
Artz go to Battery - Cell standby and see if there is some Mobile radio active there
sorin8181 said:
Artz go to Battery - Cell standby and see if there is some Mobile radio active there
Click to expand...
Click to collapse
Well, if I follow your instructions I got the same results in Cell standby with WiFi and Data ON or OFF. I still do not see your point. You just upgrade it and you tell us about later.
I do not see any radio in any case.. So please, update and tell me
mirost1 said:
What he means is - in 5.0 roms there is a Mobile Standby/Mobile Radio On bug which is a big battery drainer...
Click to expand...
Click to collapse
Well, as you have updated to B350, you can tell us because I cannot find it.
sorin8181 said:
Artz go to Battery - Cell standby and see if there is some Mobile radio active there
Click to expand...
Click to collapse
Besides, I don't understand well your request. If that happens with all ROMs, that shouldn't be a reason for not upgrading to B350. In the worst case, it will be the same than other ROMs, won't be?
this is the bug, it's prezent in b200 and all others roms till now
i don't have time to update, i'll wait for o stable version but was just curios if this bug is still prezent thanks
sorin8181 said:
this is the bug, it's prezent in b200 and all others roms till now
i don't have time to update, i'll wait for o stable version but was just curios if this bug is still prezent thanks
Click to expand...
Click to collapse
IMHO that's is just a description. It doesn't mean radio is active and using battery!

[Firmware][Leak]Huawei P8 B380 - GRA-L09C432B380

Firmware B380 (FULL) for Huawei P8 (GRA-L09) was leaked:
http://www.huaweiblog.de/handys/huawei-p8/#firmware
Installation via dialer method works fine. Google Patches from Sept 1st, 2016.
Source: huaweiblog.de
changelog?
Some mirrors since Huawei Blog's download link is going slow:
https://www.amazon.com/clouddrive/s...f2IFsMnJuzpUixhGC6?ref_=cd_ph_share_link_copy
http://gofile.me/3oK5Y/sFoSqBBEN
Just in case you forgot here are the update instructions:
Download GRA-L09C432B380FULL.zip
Extract the archive
Move the extracted "update.app" file into a folder named "dload" in the root of your SD card.
Using the dialer, dial * # * # 2846579 # * # *
Select the "Software Upgrade" and start the update from the SD card
After the update, the P8 restarts and performs the first boot optimizations
Here's the changelog converted from German using Google Translate:
This update addresses issues related to news and the presentation of the user interface are fixed and improves system security and stability using the latest security patches from Google.
[Fixes] The problem is that some text messages sometimes can not be sent over a 4G network has been resolved. The problem is that the display does not flash when in standby mode enters a message has been resolved. The problem is that some elements be the user interface displayed incorrectly has been fixed
[Optimization] Device security was Improvement using the latest security patches from Google.
[Update Notes] 1 Before you upgrade, make sure your phone is not rooted and has sufficient space. If problems with updating occur, call the customer service hotline. 2 To improve compatibility with Android 6.0, update third-party apps in the Google Play Store to their latest versions. 3 Your home screen layout may change slightly. 4 In this update, no personal data will be deleted. However it is recommended to back up important data before updating.
Click to expand...
Click to collapse
ml_taz said:
Firmware B380 (FULL) for Huawei P8 (GRA-L09) was leaked:
http://www.huaweiblog.de/handys/huawei-p8/#firmware
Installation via dialer method works fine. Google Patches from Sept 1st, 2016.
Source: huaweiblog.de
Click to expand...
Click to collapse
wipes Internal storage?
AD2076 said:
wipes Internal storage?
Click to expand...
Click to collapse
No
Does anyone tried this yet?
Is it stable enough (cm nightlies are stable enough for me) for daily use?
Any problems rooting or reinstalling TWRP after the update?
Thanks
ml_taz said:
Installation via dialer method works fine. Google Patches from Sept 1st, 2016.
Click to expand...
Click to collapse
I have TWRP installed and this method doesn't work. Should I try the update with phone attached to PC (when attached it uses recovery2 which is still the stock one)?
AD2076 said:
I have TWRP installed and this method doesn't work. Should I try the update with phone attached to PC (when attached it uses recovery2 which is still the stock one)?
Click to expand...
Click to collapse
you need stock recovery to install updates, also, you can not have root before flashing
I unrooted completely but I don't have the stock recovery.
AD2076 said:
I unrooted completely but I don't have the stock recovery.
Click to expand...
Click to collapse
You need to extract it from your current MM rom and reflash it
Sent from my GRACE using Tapatalk
Does anyone successfully flashed this???? I don't want to brick my phone
Sent from my HUAWEI GRA-L09 using XDA Labs
ionutzpaul61 said:
Does anyone successfully flashed this???? I don't want to brick my phone
Sent from my HUAWEI GRA-L09 using XDA Labs
Click to expand...
Click to collapse
I went from stock, unrooted B370 to B380. No problems to report.
desertflyer said:
I went from stock, unrooted B370 to B380. No problems to report.
Click to expand...
Click to collapse
I'm also unrooted b370..... I will download the firmware tomorrow morning and i will try it... Thanks for your answer
Sent from my HUAWEI GRA-L09 using XDA Labs
Problem -- Music folder
Flashed B380, everything is fine. One thing that drives me crazy -- on inernal memory, there is a Music folder that appeared after update, with some songs on it, and it cannot be deleted, nor folder nor files... Tried it from file manager, windows, adb (permission denied)... Still, folder and file permissions look fine... Any ideas, please?
Why is everyboday asking if someone tried and if it works fine?! I wrote in the OP that I tried and it works fine.
B380 seems to be very smooth.
Already flash this rom and so far so good but too bad all my themes and fonts collection in HWThemes folder (internal storage) is wiped.
New features found so far :
- Display network speed
- Users mode (option to set as owner or guest)
- Huawei ID now working (not new features but before this i can't access it, at least where i live)
it says Vollversion..what does mean this?
silvano2 said:
it says Vollversion..what does mean this?
Click to expand...
Click to collapse
https://translate.google.com/#auto/en/Vollversion
GodzillaMonster said:
https://translate.google.com/#auto/en/Vollversion
Click to expand...
Click to collapse
yes got it..and btw great battery improvement
silvano2 said:
yes got it..and btw great battery improvement
Click to expand...
Click to collapse
Yeah it's true!

[Firmware] Huawei P8 GRA-L09 B394 29/03/17

This update adds new features to apps, including Email, Calendar, and Notepad, and optimizes the Themes icon. [What's new] Adds a feature to prioritize emails. Adds more years to the perpetual calendar. Adds Local calendar and Global holidays in Calendar. Adds a feature to add and share contacts using QR code. Adds a feature to share notes as text, image, or email in Notepad. [Optimizations] Optimizes email login by configuring parameters automatically. Optimizes the Themes icon to be more consistent with the system. Improved device security with Google security patches. [Update notes] 1. This update will not erase your personal data, but we recommend that you back up any important data before updating. 2. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Changelog is here:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v80316/f1/full/changelog.xml
File OTA here: unusable so no link
Full update here: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v80316/f1/full/update.zip
Enjoy!
Found with Firmware Finder
very slow downloading thanks anyway
Update stops at 24%?
Sent from my HUAWEI GRA-L09 using XDA Labs
silvano2 said:
very slow downloading thanks anyway
Click to expand...
Click to collapse
Huawei server, not my fault
djg269 said:
Update stops at 24%?
Click to expand...
Click to collapse
Sorry, after unzipping, file was corrupt. Gonna try again.
Edit: update went well this time.
I can not do the rooting
djg269 said:
Sorry, after unzipping, file was corrupt. Gonna try again.
Edit: update went well this time.
Click to expand...
Click to collapse
Good!
estebitanmagic said:
I can not do the rooting
Click to expand...
Click to collapse
After updating you mean?
Updated fine from B393. Thanks!
I also can't root after update from B393 to B394. Flash Twrp went well, but rooting by the systemless method with Supersu 2.67 fails. Nothing happend. Systemless method with Supersu 2.68 ends in a bootloop.
You can use magisk to get systemless root and more
Could someone paste here stock recovery? I've used huawei extractor and I see two recoveries: recovery.img and revocery2.img. I used two of them and I'm stuck on huaei logo after updating. I think I need boot.img and recovery.img, I'm right? :> I used an ARROW firmware before.
EDIT:
Ok, it works. If someone need a recovery and boot files, link below.
https://1drv.ms/f/s!Asijdw03lZRGgf5T7kXN2PNagYWqvQ
AD2076 said:
You can use magisk to get systemless root and more
Click to expand...
Click to collapse
Root the B394 with Magisk systemless root work for me.
Thank you!
My phone was in repair shop so when it's returned I updated this directly from clean B200 and then I restored my backup - everything working OK, only few app are missing notification sound and status bar notifications (like Facebook, and messenger) but I'm not sure with what it's related. Tried to reinstall this apps and clear data, but nothing. Any advice?
EDIT: Problem solved - I did factory reset and then restored backup. I did not do factory on clean B200 after returned from service, so maybe that was problem.. So, for now, everything works fine on B394.
Some calendar improvements apparently, but still no 'Fortnightly' setting under Repetition, which I'm not impressed with!
Am liking the new 'Eye comfort' mode though, which I've enabled more or less on a permanent basis. Apart from the drop-down Shortcuts menu in the pic below, it can also be accessed via Settings > Display > Eyesight Protection.
"Eye comfort mode filters out blue light to help relieve visual fatigue when you read for a long period of time. In eye comfort mode, the screen will have a yellowish tint. This is normal"
RamsesP. said:
Root the B394 with Magisk systemless root work for me.
Thank you!
Click to expand...
Click to collapse
Hi RamsesP
I read Magisk forum to root the P8 with the B394 firmaware but I couldn't understand how it works (as I understood it needs building a new boot image).
Do You have any trick to do it ?
B394 now has Google certification.
Updated successful with UL00 model. But theme doesnt show store to download, local themes only. Anyone got same problem?
It offered my the update through the phone's built in updater. Nice
It MADE me update by nagging me constantly.
Link is dead. What is going on with Huawei servers? It's impossible to DL the latest firmware B394..... Please help

V12.0.2.0.QFAEUXM Beta or Stable?

Hi all, I see there is an update listed on this page link V12.0.2.0.QFAEUXM.
Can someone confirm if this has been released as stable already? And if you received it, how is this an improvement over V12.0.1? I am holding on to V11 as I heard V12s initial release was not that well polished and strains the battery.
Thanks!
it's only security update for August
Sent from my MI 9 using Tapatalk
LubbeSGS said:
Hi all, I see there is an update listed on this page link V12.0.2.0.QFAEUXM.
Can someone confirm if this has been released as stable already? And if you received it, how is this an improvement over V12.0.1? I am holding on to V11 as I heard V12s initial release was not that well polished and strains the battery.
Thanks!
Click to expand...
Click to collapse
- I have received this OTA update and it's stable.
- Everything work's more or less stable, at least I didn't find any issue until now.
- What I have noticed is that Weather app is replaced with G version in his name and now one can update this app manually without previous notorious "authorisation" issue.
- Mi Global Browser is still there and still can't be uninstalled ( Failed [-1000] error in adb shell during uninstall).
- In Indian Forbes site I have seen that they will release update which will allow uninstalling MiBrowser and few other apps because Indian government have banned all of these apps.
- Battery life is a little better from previous ROM.
- There is no more stuttering in Chrome browser.
- That's my humble experience so far.
Thanks @Jehonan I think I may give it a shot then.
Cannot flash the update
I am on miui_CEPHEUSEEAGlobal_V12.0.1.0.QFAEUXM.
I did not get the OTA yet and my battery life is very poor so I am eager to upgrade, I tried to update manually from the updater to either files:
- miui_CEPHEUSEEAGlobal_V12.0.2.0.QFAEUXM
- miui-blockota-cepheus_eea_global-V12.0.1.0.QFAEUXM-V12.0.2.0.QFAEUXM
but I always get the "Sorry, flash to this stable version is not allowed".
Any ideas what is the problem?
meroupow said:
I am on miui_CEPHEUSEEAGlobal_V12.0.1.0.QFAEUXM.
I did not get the OTA yet and my battery life is very poor so I am eager to upgrade, I tried to update manually from the updater to either files:
- miui_CEPHEUSEEAGlobal_V12.0.2.0.QFAEUXM
- miui-blockota-cepheus_eea_global-V12.0.1.0.QFAEUXM-V12.0.2.0.QFAEUXM
but I always get the "Sorry, flash to this stable version is not allowed".
Any ideas what is the problem?
Click to expand...
Click to collapse
Which update procedure did You follow?
Did You make folder on root of the internal drive, copied appropriate downloaded ROM inside this folder and start upgrade from there?
I went to the Rom version in settings. Cliqued on the 3 dots. Select rom to install. Then tried to import the files from download, root, dowloaded_roms folders. Same result: "flash to this stable version is not allowed".
With the same procedure I am able te reflash miui_CEPHEUSEEAGlobal_V12.0.1.0.QFAEUXM as much as I want. But no way to upgrade.
I also tried from recovery. But there is no option to flash update.zip.
meroupow said:
I went to the Rom version in settings. Cliqued on the 3 dots. Select rom to install. Then tried to import the files from download, root, dowloaded_roms folders. Same result: "flash to this stable version is not allowed".
With the same procedure I am able te reflash miui_CEPHEUSEEAGlobal_V12.0.1.0.QFAEUXM as much as I want. But no way to upgrade.
I also tried from recovery. But there is no option to flash update.zip.
Click to expand...
Click to collapse
Did You tried with OTA version of this update?
Same procedure, in root of the drive in downloaded_rom folder copy OTA update and start update from there.
Here is a link to ROM's.
P.S.
I believe that You must first go with OTA version of the firmware because of the downloaded ROM decrypting procedure. After that You can go with recovery type of ROM (full ROM upgrade).
Yes, I tried the update file as well.
Both files give the same error ("Sorry, flash to this stable version is not allowed"):
- miui_CEPHEUSEEAGlobal_V12.0.2.0.QFAEUXM_44dcb66933_10.0.zip
- miui-blockota-cepheus_eea_global-V12.0.1.0.QFAEUXM-V12.0.2.0.QFAEUXM-789914bb83-10.0.zip
I am able to flash V12.0.1 from the same site so I am sure to be on the right ROM:
- miui_CEPHEUSEEAGlobal_V12.0.1.0.QFAEUXM_4d28c84f58_10.0
Something else is preventing the upgrade.
Well, I found out that I needed to change the region settings from France to Belgium... now it updates.
How stupid!
Hi all, I'm having a strange behaviour after the update: the quick charge ( using a wireless charger ) isn't working anymore.
Does anyone have the same issue?
stocaprimo said:
Hi all, I'm having a strange behaviour after the update: the quick charge ( using a wireless charger ) isn't working anymore.
Does anyone have the same issue?
Click to expand...
Click to collapse
Nope!
Mine is working as it should, without any issue what so ever.
Strange!
Did You check wireless charger itself?!
---------- Post added at 11:19 AM ---------- Previous post was at 11:13 AM ----------
meroupow said:
Well, I found out that I needed to change the region settings from France to Belgium... now it updates.
How stupid!
Click to expand...
Click to collapse
Excellent!
I'm glad it worked for You!
Good luck in the future!
P.S.
There is nothing stupid about this so don't blame yourself!
I would rather call this Xiaomi's stupidity and theirs mumbo jumbo with all of these "special" update procedures !
What is yhe exact solution to this problem
I already tried to change my region it didn't work for me im using redmi note 8 pro Indonesia rom

Categories

Resources