Database Develop

[WIP] [2014-12-11] CyanogenMod 12 ALPHA semi-nightly builds from Archi's sources

I don't actually do this romming thing, I just compile the ROMs. All credit to JustArchi, Moster2, arter97, etc.
Read the WHOLE OP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Working
- updater-script (flashing)
- kernel (booting)
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R4P0 drivers
- Rotation
- Camera (this DOES NOT include stock camera app, use e.g. google camera)
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Internal / External SD Card
- Vibration
- GPS
- RIL (including mobile data)
Not Working
- Nothing?!?
This is NOT A STABLE BUILD.
If you suffer bootloops, or any other bugs, I do not care, unless you can provide a logcat.
If you have an issue that has already been solved or reported, do not expect a response. I'm 99% sure that your issue is known and is being worked on by the devs.
You do not need to flash this over any other ROM. Wipe dalvik cache, data and system before flashing. Allow some time for ART to finish booting.
If it doesn't work for you, and you aren't willing to put the effort in to either get a logcat or perhaps do a little bit of research by yourself, go back to 4.4. You clearly should not be running pre-alpha builds.
I use the ParanoidAndroid Beta gapps, they work fine.
And the downloads? (Changelog is in the next post down)
2014-12-11 (md5sum: 4c96155f2c46c2b3d716fa9e833165fc)
2014-12-10 (md5sum: e8fda36be5e1aaa5b58161363ebafaf5)
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
build date and cm version seem to be off. I don't know why, but the kernel version is right
If you like this, support JustArchi, Moster2 and arter97. They do all the code, I just build the builds.
I use TWRP, although any recovery should work fine. As long as your recovery is recent (i.e the latest version), it will not make a difference to how successful your installation is.
Installing in 4 simple steps!
Wipe dalvik cache, cache, data and system
Flash the ROM
Flash gapps
Doesn't work? Try skipping step 3. Still doesn't work? Logs or it didn't happen.
Fixing your problem in 4 simple steps!
Use the search function. Think of it as Google, but for this thread. Also search Archi's thread
Read the last 10-15 pages of both this thread, and Archi's
Still haven't found someone who has reported your issue or haven't found a fix? logcatlogcatlogcatlogcat. Post it here in an attachment. Explain how you produced the issue, specifically. "I pressed the button and then the thingy stopped working" is not enough.
"Wow it's been a whole two days and you haven't posted a new build?!?"
I have a life. I generally prefer my actual life over reading XDA. I do go places without an internet connection. I do not always have a computer capable of building Android. I do sleep. I do go out during the day. I do live in a timezone that is not in the USA. Therefore, I may disappear off the internet for hours, even days at a time. You can always build your own builds if you want!
These builds come straight from @JustArchi's repos. To duplicate my build, use the CM 12 manifest and put Archi's roomservice.xml in your local_manifest folder. I recommend getting a CM11 build working before attempting to build this.
XDA:DevDB Information
CyanogenMod 12 semi-nightly, ROM for the Samsung Galaxy S III I9300
Contributors
forkbomb444, JustArchi, Moster2, arter97
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-12-10
Last Updated 2014-12-11

Changelog
Remember that none of these changes are written by me!
Build 2
- A couple of new semcosh MAC addresses added to macloader
- All CyanogenMod changes up to 2014-12-11 05:30AM (GMT+0)
Build 1
- First build

is every thing working...mobile data, wifi, home button wake..?
Thanks for updated cm12 rom for s3.

vwong said:
is every thing working...mobile data, wifi, home button wake..?
Click to expand...
Click to collapse
forkbomb444 said:
Read the WHOLE OP.
Click to expand...
Click to collapse

problem with long sms
Hey,
First, thank you for sharing and your work!
I have only one question: does long sms works? I have issiu with Archi's Lolipop - If message is not too long (1 sms) everything is fine, but if im writing long message like 2-4 sms, message is not send, i can't call anyone till phone reboot and also i cannot retrive SMSC number. After reboot everything is ok.
Any fix or tip?

@forkbomb444
Signal bar bug fixed in this build?

tokict said:
@forkbomb444
Signal bar bug fixed in this build?
Click to expand...
Click to collapse
Nope.
trickster00 said:
Hey,
First, thank you for sharing and your work!
I have only one question: does long sms works? I have issiu with Archi's Lolipop - If message is not too long (1 sms) everything is fine, but if im writing long message like 2-4 sms, message is not send, i can't call anyone till phone reboot and also i cannot retrive SMSC number. After reboot everything is ok.
Any fix or tip?
Click to expand...
Click to collapse
I have no idea. Get a logcat of what happens when you send a long SMS.

thanks, will give it a go.

Is the initial keyboard start-up issue fixed in this build? (or alternatively, is there a way to run the first time boot script after I enable the keyboard, instead of having to set up everything manually?

forkbomb444 said:
Nope.
I have no idea. Get a logcat of what happens when you send a long SMS.
Click to expand...
Click to collapse
can you test sending long sms?

Will Test It Soon Thank You Dev :thumbup:
Sent from my XT1022

gtsfreak said:
Will Test It Soon Thank You Dev :thumbup:
Sent from my XT1022
Click to expand...
Click to collapse
He is not a dev. He even mentions it in OP.

I don't get it.
What's the difference between this and JustArchi's? Sure this is a newer build but nothing else has changed?

I am not getting the point of making a rom by cloning Archie's branch. Is their any value additions?This is the main reason why Dhiru sometimes keeping his work closed. I am not demoralizing OP. Some difference/value additions will make our day.. Cheers

Could you add trim support to kernel?
other then that- rom works great. Hiccups i got on Archis rom are gone here. for now that is.

Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app

shaheen7m said:
I am not getting the point of making a rom by cloning Archie's branch. Is their any value additions?This is the main reason why Dhiru sometimes keeping his work closed. I am not demoralizing OP. Some difference/value additions will make our day.. Cheers
Click to expand...
Click to collapse
dreamaddict said:
Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
and lollipop version also upgraded to 5.0.1

dreamaddict said:
Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
vwong said:
and lollipop version also upgraded to 5.0.1
Click to expand...
Click to collapse
Yeah, but still, nothing has changed from JustArchi's sources, which also has this features. The only thing is that this is compiled and released earlier than JustArchi's.
If that's the main point, to release a ROM based on JustArchis's sources before him, it's just so rude.

do I have to flash anything else exept rom, like gapps, 3g fix, camera fix ?

Did anyone tested the rom????????
Sent from my GT-I9300

[ROM][5.1.1][T810][UNOFFICIAL] CyanogenMod 12.1 for Tab S2 9.7 [BETA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The development of this ROM is stopped, as there is a working CM 13.0 image.​
This ROM is BETA and not ready for daily use at the moment​
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@CTXz
@RaymanFX
@BigBot96
@moonbutt74
@sub77
@hennymcc
I used his T710 image to base my build on. As soon as we can incorporate both builds in 1 tree, we will do so. (only differences seem to be configurations and the device blobs)
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : BETA
What is Fixed
Bluetooth shows note 4 instead of tab s2 9.7
Resolution
Touchscreen
Screen on after turning it off/timeout
Screen flicker
Screen rotation
Wifi
Internal SD card mount
External SD card mount
Sound
Headphones
Power on not working correctly, only via 'download mode' and then cancel
Magnetic cover not working
What is not working
Important
MTP
Camera not working when coming from stock Android 6.0.x image.
Minor
On some T810 devices camera is reported not to work or only once (on mine it works fine, hardware differences?)
SU not available after reboot (change setting under developer menu back and forth to old setting and it works or installing supersu from app store)
Edit /data/local/userinit.sh to work around this is also an option
Code:
#!/system/bin/sh
/system/xbin/su --daemon &
GPS
Some sensors are available, but not used (light, proximity)
Screenlock ignores screen rotate. (rotates back just before lock)
Microphone
Instructions
How to install CM12.1
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to recover from issues
Looks like the reset to recovery (<HOME><VOL-UP><POWER>) is still broken on some or all T810 devices with this build.
Press and hold <HOME><VOL-DOWN><POWER> to enter 'download' screen.
Select cancel <VOL-DOWN>
Immediately press and hold <HOME><VOL-UP><POWER> to enter TWRP
Restore back-up made during installation phase
How to ROOT
In CM 12.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
16/06/2016 - Started again to check differences with cm-13.0, Included aosp-base in cm makefile.
**********
12/06/2016 - Switched to developing CM-13.0. Work on this ROM is stopped.
**********
07/06/2016 - Switched to European ntp pool in ntp.conf. (gps still not working :( )
- Added several system.prop settings including one for the front camera. Switch back to front and v.v. works in cm app.
**********
06/06/2016 - Cleaned up proprietary files included.
- Added prop Noise suppression libraries
- libsensorservice removed from prop files, so is has to be provided by cm.
**********
05/06/2016 - Slight EGL changes
**********
04/06/2016 - Enabled CPU sets
- Samsung specific power HAL instead of universal.
**********
02/06/2016 - Camera rotation fixed.
**********
01/06/2016 - De-commonized sources, magnetic cover fixed
- Camera sensor is available, image rotated.
- Default IO scheduler changes from CFQ to noop. (HAL optimizes IO, no need for kernel to do this)
**********
30/05/2016 - Recompile 18/04/2016 state of tree with correct dtb.img
- Power on works as it should, not via Download menu
**********
25/05/2016 - Recompile 18/04/2016 state of tree with security patches from may 2016
**********
24/03/2016 - Changed values for light sensor (looks like adaptive light does something)
**********
21/03/2016 - Recompile with 1-3-2016 android security patches
**********
06/02/2016 - Disabled selinux, got to much issues
- Headphones work
**********
06/01/2016 - Enabled selinux, defaulting permissive
**********
03/01/2016 - Enabled selinux
- To be able to use the device, add "/system/bin/setenforce Permissive" to /data/local/userinit.sh
Without it at no wifi and gps, probably also no sound.
**********
28/12/2015 - Audio works
- GPS
**********
25/12/2015 - reverted useless change in fstab.samsungexynos5433 (and build to check if all works as it did)
**********
24/12/2015 - removed gsm libraries (T8100 has no sim)
- Fixed external sdcard mount
**********
22/12/2015 - internal storage
**********
19/12/2015 - Screen rotation
- Wifi
**********
16/12/2015 - Fixed screen flickering.
- Tablet can be turned on after screen off.
**********
14/12/2015 - Fixed screen orientation so touch screen and LCD have same orientation.
**********
13/12/2015 - CM12.1 Booted for the first time
**********
Downloads
Latest CM 12.1 build : https://www.androidfilehost.com/?fid=24591020540821915
All CM 12.1 releases can be found here : https://www.androidfilehost.com/?w=files&flid=45563
All CM 12.1 pre-alpha releases can be found here : https://www.androidfilehost.com/?w=files&flid=45564
All CM 12.1 alpha releases can be found here : https://www.androidfilehost.com/?w=files&flid=46097
All CM 12.1 beta releases can be found here : https://www.androidfilehost.com/?w=files&flid=49273
Recommended GAPPS by opengapps.org : http://opengapps.org/
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/Galaxy-Tab-S2
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 12.1 for Samsung Galaxy Tab S2 9.7 T810, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/KoffieNu being transferred to https://github.com/Galaxy-Tab-S2
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-12-14
Last Updated 2016-06-07
XDA:DevDB Information
CyanogenMod 12.1 for Tab S2 9.7, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, CTXz
ROM OS Version: 5.1.x Lollipop
Based On: Cyanogenmod
Version Information
Status: No Longer Updated
Created 2015-12-14
Last Updated 2016-06-16

Reserved

Reserved 2

Nice. I am mooving most of stuff to the git group. When i'm home, I'll commit the kernel patches.

For those who want to see the image boot without spending a lot of time, check YouTube. (Quality of the recording is pretty bad though)

WOW! Great work! Once we have Wifi working, this will be my Daily driver! Thanks for doing this

suzook said:
WOW! Great work! Once we have Wifi working, this will be my Daily driver! Thanks for doing this
Click to expand...
Click to collapse
For me the touchscreen is the main focus point now. (Wifi and screen glitches fixed would make it usable as a daily for me) Got the firmware and other blobs from a T810 Android 5.1.1 image (Canadian), we'll see what's the result of this compile.
Edit: recompile didn't fix the touchscreen, manually adding the 'system.prop' part of the original build.prop to the build.prop file and reboot helped with the touchscreen. Now to get it in the build atomagically and fix the wifi. (Can turn it on, won't stay on)

A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk

T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Click to expand...
Click to collapse
Very cool, looking fwd to future updates -thanks for your work here :good:

T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
Very awesome! All we need is WiFi to dd! Woo hoo!

T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
Is the latest build posted the one with the touchscreen fix?? Would like to mess around with it. Thanks.

suzook said:
Is the latest build posted the one with the touchscreen fix?? Would like to mess around with it. Thanks.
Click to expand...
Click to collapse
That is the cm-12.1-20151214-UNOFFICIAL-gts210wifi.zip, yep, touchscreen is fixed, screen flickers and you need to be fast to disable the screen timeout to be able to do something with it. As soon as the screen goes dark, it stays dark until you reboot. It is a build of the T710 version from @CTXz with just some very minor changes to get it running on this tablet. (Mainly codename and screen rotation) @CTXz pushed a T810 kernel to the new repo, will test that one tonight or tomorrow.
BTW make sure you have a backup and read the recovery section, regular reboot to TWRP didn't work on my device.

Ok, small update, screen flicker is solved, tablet can be turned on again after screen goes off. However, rotation doesn't work. Not sure if I broke it or it didn't work to start with. Will work on it tomorrow.

T_I said:
Ok, small update, screen flicker is solved, tablet can be turned on again after screen goes off. However, rotation doesn't work. Not sure if I broke it or it didn't work to start with. Will work on it tomorrow.
Click to expand...
Click to collapse
Very nice....cm on this tab is awesome!!!! Can't wait till we get WiFi. Keep up the great work.

I know asking for ETA's is a big NO NO, but just wondering if any progress is being made on WIFI? Thanks

suzook said:
I know asking for ETA's is a big NO NO, but just wondering if any progress is being made on WIFI? Thanks
Click to expand...
Click to collapse
If you know ETA's are a big big no then don't ask them. We will announce any changes with wifi.

CTXz said:
If you know ETA's are a big big no then don't ask them. We will announce any changes with wifi.
Click to expand...
Click to collapse
C'mon, Wi-Fi should've been fixed by now and you should be working on custom features at this point. /end sarcasm ?
Sent from my not-so-stock SM-T810

kisypher said:
C'mon, Wi-Fi should've been fixed by now and you should be working on custom features at this point. /end sarcasm ?
Sent from my not-so-stock SM-T810
Click to expand...
Click to collapse
I was about the get crazy until I read the end xD

It's been quiet for a while, been learning a lot last week, however, mostly what doesn't work. I hope to get my build environment back to a correct state and build an image that is in the same state as the one on the 16th.
This is a first, developing cm myself. I'm getting frustrated with the way git works. (or at least, it's counter intuitive to me, so I messed up a bit and reverting to an older state is not that straight forward as I would expect it to be) I'll get there eventually, but it's slower then I would like.
Priority list for me:
Getting build environment under control so I get something bootable again
Rotation
SD card
Wifi

Just got the wifi working on the T710. Fix will be applied to the T810 and should work too

[ROM][6.0.1][T810][ABANDONED] CyanogenMod 13.0 for Tab S2 9.7 wifi

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Abandoned as Cyanogen pulled the plug on CyanogenMod​
As soon as Lineage OS build farm is setup, it'll return as Lineage OS. A new topic will be started. In the mean time, building from source is an option.
This project is the official continuation of the http://forum.xda-developers.com/tab-s2/development/rom-cyanogenmod-13-0-tab-s2-9-7-t3397682]unofficial build.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
I used @RaymanFX's T815 image to base my cm 13.0 build on.
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : testing
Everything except what's reported below is working. Nothing 'fixed' yet, first build.
What is Fixed
What is not working
Important
Fingerprint scanner not working
Minor
Limited wifi 5GHz support (channels above 100 give issues)
Compass is 180 degrees mis-aligned
About says 'Phone' instead of 'Tablet' (haven't found any other issues, other then text)
Instructions
How to install CM13.0
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to ROOT
In CM 13.0 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
17-07-2016 - Corrected last noop usage to bfq in /init.samsung.rc
**********
11-07-2016 - Recompile UNOFFICIAL BETA build with latest CM patches.
**********
05-07-2016 - Enabled multi user in UNOFFICIAL BETA build.
**********
29-06-2016 - 1st Nightly build
- Changelog limited to changes in gts210wifi sources, updates in gts2-common and other general parts are included via nightly system.
**********
Downloads
All CM 13.0 Nightly releases can be found here: http://get.cm/?device=gts210wifi
All UNOFFICIAL BETA versions van be found here: https://www.androidfilehost.com/?w=files&flid=68015
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/CyanogenMod/android_device_samsung_gts210wifi
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 13.0 for Samsung Galaxy Tab S2 9.7 T810, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/Galaxy-Tab-S2
ROM OS Version: 6.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-06-13
Last Updated 2016-06-27
XDA:DevDB Information
CyanogenMod 13.0 for Tab S2 9.7 wifi, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, RaymanFX, CTXz
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-06-29
Last Updated 2017-01-08

Great to see the journey resulting in an official nightly. Well done.
Sent from my A0001 using Tapatalk

Fritzy62 said:
Great to see the journey resulting in an official nightly. Well done.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I'm totally happy. Looks nice, even with my dark theme...
Sent from my T810 running cm-13.0

This awesome love your work just one thing when I try to format my SD card as internal it just gets corrupted why is this

Delta wolf said:
This awesome love your work just one thing when I try to format my SD card as internal it just gets corrupted why is this
Click to expand...
Click to collapse
Can't think of a reason why it should do that. (and why you should do that, with 32 Gb internal)
I'm currently out of large enough SD's so I could transfer internal to external.
Does a format as regular card work?
Can you get a logcat (start before format, stop after it failed) of the format as internal and when regular fails, one of that action as well?

Congratulations, all your hard work is paying off. Great stuff sir. Love your ROM. ?
Sent from my SM-T810 using XDA-Developers mobile app

Not sure how to get logcat but formatting as portable works while formating as internal it all goes through says Sd card is working I hit done and it says corrupted EDIT***: some other people were having this issue on different devices it appears it was an issue with cm 13 that got patched in a different nightly likely the same issue here
---------- Post added at 03:13 PM ---------- Previous post was at 02:27 PM ----------
So formating as internal still goes corrupt but when entering twrp to erase the Sd twrp says it can't mount adoptable storage unit

Thanks for your hard work.
As I am still on the "unofficial" build, do I need to clean flash the official nightly ?
Edit:
Did a clean flash, to on the safe side. Unfortunately though I still cannot get the quicksettings to. I don't even the option in my menu.
Incase embedding doesn't work: https://www.youtube.com/watch?v=tp6c60Andgk

OK so I have a floating logcat did the format and stopped it how do I send it over can't find option to save the log EDIT**** I FOUND HOW TO SAVE but won't let me upload I can send an email with it if that is OK? And only reason I'm doing it is because I have a bunch of big apps and a lot of music I had 2gb free before I erased everything and flashed cm also if I may request a close all button for closing out application

Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.

akiradavis said:
Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.
Click to expand...
Click to collapse
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
EDIT: just tried again and now all it says is loading I prefer to use kodi so not a big deal to me

Delta wolf said:
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
Click to expand...
Click to collapse
Where can I find the tablet version of Netflix? I only see the one app in the Play Store.
EDIT: Also - I am on version 13.0-20160629-NIGHTLY-gts210wifi - Maybe this nightly broke Netflix?
---------- Post added at 02:10 PM ---------- Previous post was at 02:03 PM ----------
Delta wolf said:
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
EDIT: just tried again and now all it says is loading I prefer to use kodi so not a big deal to me
Click to expand...
Click to collapse
Ahh, just saw this. Yeah, it appears its down. But at least ChromeCast works!

Wow. Official for the T810. Nice job! Should hopefully be somewhat soon before the 710 gets it aswell. I'm thinking of getting a 713 to learn this on. Good stuff!

Nice work! This may just get me off my year-long break from flashing.
Sent from my SM-G935T using Tapatalk

Thanks TI for all the hard work in getting this ROM running on our S2's, it's running really nice and smooth for me and I thank you and those who helped for putting forth all the effort in making it happen, it's much better than TW IMO. :good:
Idk if it's OK to post a request in this thread but can someone in the community please create a custom under/overclock/under volt kernel for this ROM? I was spoiled using the ROM and custom kernel that Engine95 made for Lollipop TW and it seemed to take my S2 to the next level especially with battery savings, adjusting the BIG processor down to 500mhz really had a noticeable impact. Idk what settings he used for the undervolting but he set the oc parameters for the little processor up to 1.6ghz and the BIG from 500 to 2.2ghz on the interactive governor and my S2 was running great. I can only imagine what this ROM would do with a similar custom kernel but I know the performance would make our S2's jump to the next level. Thanks again :good:

Is it also possible to add multi user support

pilspeda said:
Thanks for your hard work.
As I am still on the "unofficial" build, do I need to clean flash the official nightly ?
Edit:
Did a clean flash, to on the safe side. Unfortunately though I still cannot get the quicksettings to. I don't even the option in my menu.
Incase embedding doesn't work: https://www.youtube.com/watch?v=tp6c60Andgk
Click to expand...
Click to collapse
Embedded didn't work (here). Thanks for the video, learning more about android every day. I have the option set to right and when I turn it off nothing changes, so I can confirm, it doesn't work. Will have to check on the phone what it should do though and then look into it.
Delta wolf said:
OK so I have a floating logcat did the format and stopped it how do I send it over can't find option to save the log EDIT**** I FOUND HOW TO SAVE but won't let me upload I can send an email with it if that is OK? And only reason I'm doing it is because I have a bunch of big apps and a lot of music I had 2gb free before I erased everything and flashed cm also if I may request a close all button for closing out application
Click to expand...
Click to collapse
Emailing would be fine. There is a site to share logs online, but I've forgotten which one that is. (will look into that as well)
akiradavis said:
Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.
Click to expand...
Click to collapse
I'm using 32 and didn't need to format. Will test.

Nandr0idC0nsumer said:
Wow. Official for the T810. Nice job! Should hopefully be somewhat soon before the 710 gets it aswell. I'm thinking of getting a 713 to learn this on. Good stuff!
Click to expand...
Click to collapse
The T713 is snapdragin, not exynos, different base. I don't know if you can use the common we have, I guess not, as that one depends on the exynos libs.

Towle said:
Nice work! This may just get me off my year-long break from flashing.
Click to expand...
Click to collapse
A whole year without flashing? I select my devices on the option to flash... (when no image available, I'll build )
Welcome back to the light.

At the moment the rom is on phone mode. For multiuser etc. you have to set android to tablet mode.

[ROM][7.0][T810][ABANDONED] CyanogenMod 14.1 for Tab S2 9.7 wifi

As Cyanogen pulled the plug on CyanogenMod, this project will continue under Lineage OS​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Alpha and not ready for daily use at the moment​
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
I used @RaymanFX's T815 image to base my cm 13.0 build on, which in turn is the base of this cm-14.1.
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : testing
Everything except what's reported below is working (or not yet reported as not working).
What is Fixed
In '20-09' build reboot to recovery triggers message 'Factory reset'. (wrong messagem not resetting)
Camera not working in selinux enforcing
Front facing camera unable to save image
Bluetooth not working
Hardware codecs not working (fallback to software for mp3/flac works)
Limited wifi 5GHz support (channels above 100 give issues)
Video recording not working? (not tested on T810, reported not working on T815)
What is not working
Important
Fingerprint scanner not working
Minor
Compass is 180 degrees mis-aligned
Mic not working (no input routing)
Instructions
How to install CM13.0
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to ROOT
In CM 14.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
08-12-2016 - Compile with curren cm-14.1 source and [URL="https://review.cyanogenmod.org/#/c/173951"]this patch[/URL].
**********
25-11-2016 - Cm-14.0 is abandoned upstream, limiting uploads to cm-14.1.
- Recompile with camera fix merged in cm sources.
**********
21-11-2016 - Fixed camera (again).
**********
20-11-2016 - Broke camera in enforcing mode (unable to save picture).
**********
17-11-2016 - Recompile from clean tree, camera and youtube work now.
- Confirmed lock-screen-rotate fixed, but only after clean flash and [b]no restore of device ID[/b].
**********
14-11-2016 - First succesful cm-14.1 boot. (Switched project to cm-14.x)
**********
31-10-2016 - Selinux set to enforcing.
**********
12-10-2016 - Disabled telephony that got included regardless specifying I don't want it.
- Fixed several bluetooth issues
- Removed use of old api (v1) by camera
**********
03-10-2016 - First build with cm-14.0 release (previous were staging builds)
- Fixed bluetooth
**********
25-09-2016 - Fixed selinux contexts for camera so it works in enforcing mode
- Fixed front facing camera so it is able to save images.
**********
22-09-2016 - Reboot to recovery now triggers correct message
- 2nd build selinux permissive.
**********
20-09-2016 - 1st cm-14.0 build
**********
Downloads
Latest CM 14.1 build : https://www.androidfilehost.com/?fid=673368273298915423
All CM 14.1 releases can be found here : https://www.androidfilehost.com/?w=files&flid=128488
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, and already patching the common sources to cm-14.0, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/CyanogenMod/android_device_samsung_gts210wifi
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 14.1 for Tab S2 9.7 wifi, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, Raymanfx, CTXz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: Cyanogenmod
Version Information
Status: Alpha
Created 2016-09-22
Last Updated 2016-12-29

Nice! Thank your very much for this early build!
I will try it as soon as I am able.
Sent from my SM-T810 using XDA-Developers mobile app

GO hard brother, thanks for all your efforts!

I've been using cm-14 since the 20-9 build, it's running pretty stable, although it's even more stable with selinux in permissive. Looks like some contexts have changed a bit in cm-14. (or the camera and some other routines ignore them)
I found 1 game not playing nicely with Nougat, CSR Classics, but the racing set from CSR work nicely, so I think that's a CSR related bug.

Fixed camera so it'll work in selinux enforcing (not yet activated) and front facing camera is able to save images.
Updated OP.

Awesome thank you!

@T_I Thought you might like 2 comments re your really great adaptation of CM14. Have been using your CM13 nightly downloads for about the last 5 weeks on my T810 and was so pleased with the result that I was slightly hesitant about trying CM14, however this afternoon I took the plunge and installed it as per your instructions. First impression is that I can hardly believe how problem free the installation of the Rom and the Open Gapps 7.0 pico proved to be.
I don't have a huge number of apps installed, about 30, but with one exception they are all performing as scheduled and I couldn't be more pleased, the one app that doesn't work is "Set CPU", there is no "forced closure", no error message, it just doesn't work. There are no forced closures of any other app including the Google Play & Services.
One point which might interest you as you mentioned it in your "OP" notes. I play mp4 movies using the app "MX Player Pro" with the Arm 7 codec installed and they play using the HW+ codec perfectly,
Was initially disappointed that "Theme Chooser" was missing from "Settings" but I can live with that considering how well everything else performs.
Once more congratulations on a really superb "port".
EDIT on 09.27.... @T_I I know this point is insignificant and pure "eye candy" but I love the touch ..... I'm talking about when one connects a usb connection from PC to S2 then the "icon" displayed at top left is now "N" (for Nougat ?) instead of the normal CM icon.

planning to attempt with the t710 again?lol

NalNalas said:
I've had this flashed since last night, and the battery so far has been great. Thanks a ton for this.
Click to expand...
Click to collapse
How much better would you say the battery life has been?
Would also appreciate input from anyone else whos noticed a difference (good or bad) with the battery life.

This ROM is working great so far!!

samsung_xoom said:
planning to attempt with the t710 again?lol
Click to expand...
Click to collapse
I can run a cm-14 build for T710 to see if that one boots.

I can test it and let you know , in my limited time I have lol

This rom is very stable, fast and reliable. The battery life is excelent. I use it as my daily driver since sept. 22!!! (Now i have a sept. 27 update)
Thanks T_I for your hard work!!!

Uploaded new image. @RaymanFX got bluetooth working on his device and the fix works on T810 as well. Also CM switched cm-14.0 from staging to release. There is still work to be done, but build shows working bluetooth (at least I can connect a keyboard and that one works).
I noticed crashing phone app and saw one ExchangeServices crash. (don't use both) Updates OP.

Latest build works wonders after I deleted from /system/app and /system/priv-app all the apks related to telephony/SMS/MMS/etc. for my T810.
EDIT: After some time, it all came crashing down, Play Services didn't like the removal of the packages, and some apps auto-removed themselves. Better wait until dev ships out another build.

Just tried to install the Oct 3 version of this ROM and as soon as it boots a box appears saying "com.android.phone has stopped". No matter how many times I click OK, the message just reappears and I can't get past it. Even have to use the power-home-vol- button combination to power off. This is on a T810 after full wipe, install ROM and install 7pico gapps. Tried the install three times. Coming from cellular south 6 ROM.

Please don't forget T710....

lewmur said:
Just tried to install the Oct 3 version of this ROM and as soon as it boots a box appears saying "com.android.phone has stopped". No matter how many times I click OK, the message just reappears and I can't get past it. Even have to use the power-home-vol- button combination to power off. This is on a T810 after full wipe, install ROM and install 7pico gapps. Tried the install three times. Coming from cellular south 6 ROM.
Click to expand...
Click to collapse
I got the same message, but can mute. Don't know where it comes from. I was working on the staging version of cm-14 and switched to the release version. Looks like there are some bugs left. (it's now less stable then with the staging cm-14)

T_I said:
I got the same message, but can mute. Don't know where it comes from. I was working on the staging version of cm-14 and switched to the release version. Looks like there are some bugs left. (it's now less stable then with the staging cm-14)
Click to expand...
Click to collapse
Just by clicking the OK button? Message just pop right back up when I do that.

lewmur said:
Just by clicking the OK button? Message just pop right back up when I do that.
Click to expand...
Click to collapse
I get the message with the 2 options 'stop application' and 'Mute until reboot'. The Mute option silences the warnings, but the app will still misbehave.
Exchange services I've been able to freeze, the phone app is also used for syncing contacts and I think calendar.

[ROM][3.4] Omnirom 4.4.4 Stable For Mini 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Omnirom 4.4.4 FOR MINI2
First i want to thank @TheWhisp for his sources
this is Android Omnirom for s6500 and s6500d
- What not Working
Camcorder
NFC(S6500 only)
- What Working :
Everthing
Install method for s6500d only:
-Download and install CWM 6.0.5.1
-Download the rom
-Download google apps
-Copy the rom and gapps to external storage
-Wipe data,cache,format system
-Install the rom and gapps and the fix
-enjoy
Install method for s6500 only: plz follow the instructions
Im not responsable for any damaged phone so do it on your own risk
-install twrp and reboot in recovery
- go to wipe and Advanced wipe and then wipe cache , system
-in advanced wipe choose data and go to repair or change file system
- go to change file system and choose EXT4
-Install the Rom
-Reboot recovery
-Install gapps
-Enjoy
- Downloads for S6500
Rom V2:https://drive.google.com/file/d/1-A2KadQCyRqxQqSuy_bFeL1ALxPd8t99/view
Gapps :https://androidfilehost.com/?fid=23610159112653717
TWRP 3.0.2.0 Odin : https://drive.google.com/open?id=1TU...v_m0MfaaxWtspr
- Downloads for S6500d
Very Soon
For the S6500 Install Video , this is the Link : https://www.youtube.com/watch?v=ACLEn63Nvi8&feature=youtu.be
Credits :
-TheWhisp
-erikcas
-Konstat For some patches
-Samsung
-bleached for some motivation
-lorn10 "special thanks for you"
if you consider Donating thanks​
XDA:DevDB Information
[ROM][3.4] Omnirom 4.4.4 Stable For Mini 2, ROM for the Samsung Galaxy Mini
Contributors
Shadow Of Leaf
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Created 2018-08-20
Last Updated 2018-08-20

Changelog and Screenshot
Changelog
-V1 20-08-2018 : Initial Version
-V2 04/10/2019 : Fix the call Hang bug (i guess cause sim card slot doesnt recognize my simcard hardware failure so test and report) and some optimisations
***NOTE*** to USE Omnirom 4.4.4 with art and GAPPS you need a supported gapps packages this is a link for gapps working on art http://www.mediafire.com/file/typy3b6nq94r48f/GApps_Light_4.4.x_signed.zip/file

Hello.
First, thank you very much. It is working really fine.
But I have a problem, I can not receive calls. I can make calls, but when someone calls my number, my phone does nothing. It is working with cm11. I've tried several sim cards, from different companies, none worked. I've looked for usual solutions, but no luck.
It is a shame,becasuuse this is working much better tahn cm11. Do you think there is something I can do?
Thanks again.

aficionadodesu said:
Hello.
First, thank you very much. It is working really fine.
But I have a problem, I can not receive calls. I can make calls, but when someone calls my number, my phone does nothing. It is working with cm11. I've tried several sim cards, from different companies, none worked. I've looked for usual solutions, but no luck.
It is a shame,becasuuse this is working much better tahn cm11. Do you think there is something I can do?
Thanks again.
Click to expand...
Click to collapse
Thanks for reporting
It will be fixed soon
And build for s6500d also
Stay tune

so what ? is it working now or not ?

hi , can i use this ROM for GT-S5570i ??
if not, could you please creat one for GT-S5570i

but is update? it's work on s6500

hello this rom support turkish language?

ardakerem said:
hello this rom support turkish language?
Click to expand...
Click to collapse
yes it have all language

This is really AWESOME work Shadow Of Leaf! Many thanks for this great mini 2 Omnirom 4.4.4. :good:
I didn't know that you are still developing for the mini 2. I have discovered this latest KitKat rom just some time ago. It works in almost every regard better then all the previous CM11 builds. It is again somewhat more fluent (speedy) and is out of mine view less laggy when comparing with the previous builds.
However, - as already mentioned there is only one grave issue present. I also don't receive any calls.
I think the problem is located in the mobile network setting or a different mobile network driver. As network type UMTS is showed, - all the previous KitKat builds showed (in my case) HSPA or something else but never UMTS. I tried to enforce "2G/3G Preferred" and "2G/3G Auto" but they wouldn't be accepted. It was possible to set the Network to "3G Only" and "2G Only" but the call receiving still doesen't work.
Furthermore when I make a call and want to hang it up, - I can push the red hang up tab but the call will not be terminated. So the call is still open but it is not visible (at the phone) that the call is still active.
As mentioned in some other threads, - my mini 2 has baseband version S6500XXMD1.
Whatever, - you may fix this in a future update. It would be great if you can include one brighter background file, - the two standard one are quite some dark.
Yes, and yours TWRP 3.0.2.0 works absolutely stable. Much better than the previous TWRP version.
Will send you for all this work a litte donation. Kind regards,
lorn10

lorn10 said:
This is really AWESOME work Shadow Of Leaf! Many thanks for this great mini 2 Omnirom 4.4.4. :good:
I didn't know that you are still developing for the mini 2. I have discovered this latest KitKat rom just some time ago. It works in almost every regard better then all the previous CM11 builds. It is again somewhat more fluent (speedy) and is out of mine view less laggy when comparing with the previous builds.
However, - as already mentioned there is only one grave issue present. I also don't receive any calls.
I think the problem is located in the mobile network setting or a different mobile network driver. As network type UMTS is showed, - all the previous KitKat builds showed (in my case) HSPA or something else but never UMTS. I tried to enforce "2G/3G Preferred" and "2G/3G Auto" but they wouldn't be accepted. It was possible to set the Network to "3G Only" and "2G Only" but the call receiving still doesen't work.
Furthermore when I make a call and want to hang it up, - I can push the red hang up tab but the call will not be terminated. So the call is still open but it is not visible (at the phone) that the call is still active.
As mentioned in some other threads, - my mini 2 has baseband version S6500XXMD1.
Whatever, - you may fix this in a future update. It would be great if you can include one brighter background file, - the two standard one are quite some dark.
Yes, and yours TWRP 3.0.2.0 works absolutely stable. Much better than the previous TWRP version.
Will send you for all this work a litte donation. Kind regards,
lorn10
Click to expand...
Click to collapse
Hello
Thanks for your amazing work
i upload a new version that possibly fix call hang problem so test and report
and about ART problems i think the GAPPS is the issue so i left a ART supported GAPPS in the changelog

Many thanks @Shadow Of Leaf for that new release. :good:
Unfortunately the link regarding the new build seems not correct, it points to the previous "omni-4.4.4-20180817-jena-HOMEMADE" release. Also the internal build date seems the same. Or has the new build the same name like the old one?
If yes then it would make sense to add a V2 to the filename.
Regards
lorn10

lorn10 said:
Many thanks @Shadow Of Leaf for that new release. :good:
Unfortunately the link regarding the new build seems not correct, it points to the previous "omni-4.4.4-20180817-jena-HOMEMADE" release. Also the internal build date seems the same. Or has the new build the same name like the old one?
If yes then it would make sense to add a V2 to the filename.
Regards
lorn10
Click to expand...
Click to collapse
You Welcome
yes the name and build of V1 and V2 are the Same because i didn't build a new one
it is the old version with bugs fixed (i think)
you try it ???

Hi there Shadow Of Leaf
Thanks for the fast replay. Unfortunately the "hang on" issue is still the same like on the V1 build. It is not possible to hang up the call, - it stays open in the background.
The overall performance is really nice for that old phone hardware, - especially when the ART runtime is used. It feels a little bit better then CM11. And with Open Launcher v37 (v40 runs less fluid) the phone UI is looking more modern. Because of the smaller screen size, Open Launcher has to be adjusted somewhat. For everyone who want's to try it, I have uploaded in the attachment a v37 mini 2 config file. (I get the Open Launcher package from that side: https://f-droid.org/en/packages/com.benny.openlauncher/)
Unfortunately Android ART works only stable with certain really old GAPPS packages. The problems starts when these are updated automatically, the Google Apps stop working and are crashing randomly. I hoped that this problem is CM11 related, but Omni ROM 4.4.4 has the same issues. So this is most likely a fundamental problem of KitKat. It seems that Google has not designed the newer GAPPS packages Android "KitKat ART" compliant. In conjunction with ART, they may work properly only on "Lollipop ART" and above.
However, if I remember me right, I have read sometime something about these KitKat ART limitations. That may be a strange idea, but is it possible to "back-port" certain portions of Lollipop ART, like in the ART dex2oat tool, into KitKat? https://source.android.com/devices/tech/dalvik Well, maybe it's possible but the effort would be far too big...
Kind regards
lorn10

Here follows a short addition, - I have found an interesting XDA topic regarding KitKat ART vs. Lollipop ART. There is discussed the theoretical possibility to use the Lollipop "libart.so" in KitKat: https://forum.xda-developers.com/android/help/using-libart-android-l-kitkat-t2805745
Well, as assumed by me, this will be a BIG project. It's not so simple how it looks, the KitKat "libart.so" can't be just replaced with the Lollipop version. This concept to backport certain portions of a newer ART runtime back to KitKat is more a theoretical possibility, - not practical. A Backport of a "Android Go" version for the mini 2 would be more realistic then that...

lorn10 said:
Here follows a short addition, - I have found an interesting XDA topic regarding KitKat ART vs. Lollipop ART. There is discussed the theoretical possibility to use the Lollipop "libart.so" in KitKat: https://forum.xda-developers.com/android/help/using-libart-android-l-kitkat-t2805745
Well, as assumed by me, this will be a BIG project. It's not so simple how it looks, the KitKat "libart.so" can't be just replaced with the Lollipop version. This concept to backport certain portions of a newer ART runtime back to KitKat is more a theoretical possibility, - not practical. A Backport of a "Android Go" version for the mini 2 would be more realistic then that...
Click to expand...
Click to collapse
sorry for the bad news
i think that i fix the hang on call bug but it seems sophisticated one
i will try to to build a new version for s6500 and for s6500d also ( i don't how im gonna test it out, cause my sim card place in the phone seems to be broken)
for the ART i think in kitkat is just a preview for developers to test it out , not like lollipop is seems stable to use it
for the theory i think its possible but it need a lot of work and could not work (lollipop and kitkat are not alike so it well be a miracle if it work)

years late. but ... I have the S6500T version, all rom that I install fails to start
the apps are updated, but when it reaches the home screen the message "shutting down" appears even though the rom has started normally