ViPER4Android for Samsung Galaxy E5(for TWRP):
The script will set ViBER + music from N5
aliwaris said:
ViPER4Android for Samsung Galaxy E5(for TWRP):
The script will set ViBER + music from N5
Click to expand...
Click to collapse
I forgot to say, to work to establish BusyBox
This broke my default music player and also no app of viper4android was found on app drawer.
please tell a way to revert to previous settings prior to this zip.
also anyone have stock music player of E5, please provide...
Ammitz said:
This broke my default music player and also no app of viper4android was found on app drawer.
please tell a way to revert to previous settings prior to this zip.
also anyone have stock music player of E5, please provide...
Click to expand...
Click to collapse
stock music player of E5
thanx for the files...
should i replace these files in your previous zip.. or install them as it is?
also, is their no way to get viper 4 android in E5.
i used different methods, but I get errors lyk..
some say you are not rooted,
some says busybox not properly installed
some, drivers not installed in viper coz of neon issue..
however i am rooted, have twrp and super su installed..
Related
Hi, I wondered if there was any way for me to get the standard Samsung video player app installed on my 3110 running [ROM][Hybrid][JB:CM10] Paranoid Android 2.51+ - Legacy?
I extracted SecTabletVideoPlayer.APK from a Samsung 4.1.1 rom and tried to install but it stopped part way through with a generic not installed message?
Thanks
Dom
You could try to copy that APK to /system/app/ and set its permission to rw_,r__,r__. Then reboot your tab. I haven't tried to install that myself, but it might work.
DominicAllison said:
Hi, I wondered if there was any way for me to get the standard Samsung video player app installed on my 3110 running [ROM][Hybrid][JB:CM10] Paranoid Android 2.51+ - Legacy?
I extracted SecTabletVideoPlayer.APK from a Samsung 4.1.1 rom and tried to install but it stopped part way through with a generic not installed message?
Thanks
Dom
Click to expand...
Click to collapse
I know some stock application just work on stock roms(touchwix ui)
Send From nokia n9 QUAD BOOT : Maemo, Meego, NITDroid, and Kubuntu.
Thanks guys, will give the perms a try
It won't work... It needs the TouchWiz framework and other files, that don't exist in non-TouchWiz roms. I've also wanted that and tried, but no go. Not the video player, the music player, the calendar, the S-Planner, nothing done by Samsung works.
paraiso-san said:
It won't work... It needs the TouchWiz framework and other files, that don't exist in non-TouchWiz roms. I've also wanted that and tried, but no go. Not the video player, the music player, the calendar, the S-Planner, nothing done by Samsung works.
Click to expand...
Click to collapse
Yeah, i tried getting the music player to work, with no luck.
Sent from my GT-P3110 using xda app-developers app
permission problem
I'm using a GS4 i9505 v4.3 and 4.2.2(both of them) rooted with CF-auto, every time when this app want to work i ask for root permission and I grant but at the end I get this error:
su-mksh: <stdin>[14]:cat:/system/bin/debuggerd.res:no such file or directorymount:device or resource busy
I also update the security policy to pass the app.
What is the problem?
naderus said:
I'm using a GS4 i9505 v4.3 and 4.2.2(both of them) rooted with CF-auto, every time when this app want to work i ask for root permission and I grant but at the end I get this error:
su-mksh: <stdin>[14]:cat:/system/bin/debuggerd.res:no such file or directorymount:device or resource busy
I also update the security policy to pass the app.
What is the problem?
Click to expand...
Click to collapse
Update the busybox finary and install supersu ..that may help?
Sent from my GT-P3100 using Tapatalk
Hi there!
I'm using Existenz ROM, a stock-based rom, and yesterday I tried to install Viper4Android FX with no success. I had already installed it on CyanogenMod and it worked perfectly. After having installed Viper FX on my phone, I opened it and it installed the drivers. Then it told me that LPA (Low Power Audio) was enabled in build.prop and that it could cause problems, so I allowed Viper to remove this feature from build.prop.
Then I rebooted and I started playing with settings. I opened Walkman but sound was the same as before. I enabled "Force Viper FX" but it didn't work either.
Can you help me?
Thanks!
Tomoms said:
Hi there!
I'm using Existenz ROM, a stock-based rom, and yesterday I tried to install Viper4Android FX with no success. I had already installed it on CyanogenMod and it worked perfectly. After having installed Viper FX on my phone, I opened it and it installed the drivers. Then it told me that LPA (Low Power Audio) was enabled in build.prop and that it could cause problems, so I allowed Viper to remove this feature from build.prop.
Then I rebooted and I started playing with settings. I opened Walkman but sound was the same as before. I enabled "Force Viper FX" but it didn't work either.
Can you help me?
Thanks!
Click to expand...
Click to collapse
Stock Sony sound enhancements conflict with Viper Audio. The way I got V4A working on a stock Sony rom is by rooting, installing App Master, and using this app to uninstall all the sound enhancements that Sony puts into the ROM (I believe there are 3 packages to remove). App Master has the option to put apps in a recycle bin, so if you uninstall an app that actually breaks your sound system all together, it is fairly easy to undo the changes. After you uninstalled the stock sound fx, install V4A and it should work.
BTW - not sure if V4A will work with the Walkman app at all. You might want to try Poweramp.
Goto Settings/Sound/music setings or sound settings and select viper4android.Then use v4a.It will work
umair42 said:
Goto Settings/Sound/music setings or sound settings and select viper4android.Then use v4a.It will work
Click to expand...
Click to collapse
Great! It worked! Thank you :good:
jupitreas said:
Stock Sony sound enhancements conflict with Viper Audio. The way I got V4A working on a stock Sony rom is by rooting, installing App Master, and using this app to uninstall all the sound enhancements that Sony puts into the ROM (I believe there are 3 packages to remove). App Master has the option to put apps in a recycle bin, so if you uninstall an app that actually breaks your sound system all together, it is fairly easy to undo the changes. After you uninstalled the stock sound fx, install V4A and it should work.
BTW - not sure if V4A will work with the Walkman app at all. You might want to try Poweramp.
Click to expand...
Click to collapse
V4A works perfect with Walkman , even with soundcloud.
UPDATED: Updated V4A flash file to Viper4Android v2.4.0.1 and added notes about the TabS AOSP Marshmallow custom ROM compatibility by Schischu.
The obligatory warning:
"I take no responsibility for what happens to your device if you follow this guide. This procedure works with multiple Audio/Video apps. It should work for any Samsung device, but I can't confirm, so feedback please if it works for your device."
- 3DSammy
Root with SuperSU is required either using a standard rooting method that trips KNOX or following this guide "[GUIDE] How to root without tripping knox - Kitkat and Lollipop, Locked bootloader" by ashyx. Having SuperSU installed and functioning is essential to get around Viper4Android's need for SELinux permissive mode which is not possible when you are using the Samsung stock firmware.
As of June 8th maximumentropy posted a method to use SuperSU to work around Viper4Android's need for SELinux permissive mode. This requirement was problematic on Samsung devices where the SELinux mode changer app did not work with the Samsung stock firmware.
The instructions and flash files below will allow both custom ROM and rooted stock ROM devices to install Viper4Android, an amazing audio replacement.
Note: V4A and the included flash file works with the AOSP Marshmallow custom ROM compatibility by Schischu. Any of the SoundAlive comments below can be ignored for this custom ROM.
Steps:
1) Download the two flash files "ViPER4Android-supolicy.zip" and "LolliViPER_TAB_S.zip" (at the bottom of this post)
2) Flash ViPER4Android-supolicy.zip and LolliViPER_TAB_S.zip with FlashFire or a Custom Recovery (e.g. TWRP) of your choice.
3) If you want Spotify to work and maybe other audio/video apps then Samsung's "SoundAlive" must be removed or disabled. Options:
Backup then freeze or delete "SoundAlive 2.0" with Titanium Backup
Backup then delete the "/system/priv-app/SoundAlive_Tablet_20" directory with a File Manager that has RW "/system" privileges
Remove "SoundAlive" with an app like "System Remover app" found on the Playstore
4) Reboot your device and then start Viper4AndroidFX and install its drivers when prompted then reboot once more
5) Start the Viper4AndroidFX app and configure audio for the device speakers/headset/bluetooth as desired. Please refer to Viper4Android XDA forum for details about the extensive options.
NOTES:
Be aware that if you do not disable/remove SoundAlive then Spotify will disable V4A until the next device reboot. Causing confusion about whether V4A is actually working reliably. Other audio apps may also demonstrate this tendency.
If you check the V4A driver status and audio is not playing the status will show "Processing: No" that should change to "Yes" when audio is playing and V4A is working correctly.
A Rule-of-Thumb with V4A is to make sure to turn off any Audio/Video player app's specific equalizers, gain controls, audio effects, ... etc, as they interfere with Viper4Android. If you still cannot get Viper4Android working with a specific app, that's not listed in this thread, then search first then if necessary ask on the V4A's XDA forum.
So far the following Audio/Video apps have been successfully tested with V4A:
Neutron audio player (Settings and uncheck Equalizer;Sound Sound;DSP-Effects->Surround Sound;Relay Gain;Normalization)
MX Player Pro (Settings->Audio->Volume Boost unchecked)
Spotify (If it is working properly the Spotify->Settings->Equalizer will directly display the V4A app)
TuneIn Radio
Google Music Player
PowerAmp (PowerAmp Settings->Advanced->Uncheck everything)
YouTube
ViralPro (a YouTube alternative)
Apps that do not work with V4A (likely due to the removal of "SoundAlive"):
Samsung's "Music" app (still plays audio but not by utilizing V4A processing)
Please post any apps not mentioned here, which you either get working or that have problems with after checking the V4A XDA forum.
If you have SuperSU working and have never tried V4A do so and you ears with thank you!
Credits:
zhuhang: For developing Viper4Android in the first place
Chainfire: For developing SuperSu and FlashFire
ashyx: For providing the "How to root without tripping knox - Kitkat and Lollipop, Locked bootloader" guide
maximumentropy: For posting the method and flash file to work around V4A's need for SELinux
AndrasLOHF: Who's post is where I grabbed the original V4A install script.
Schischu: For AOSP Marshmallow custom ROM
Zip file(s):
V4A install for a Tab S
Thanks worked like a charm. Been trying to figure it out for about a week
+1! Stable viper performance with LP, great sound, thank you so much!
Best, maris
Thanks man, It works like a champ and beats my Bose speakers same as S6
Brilliant job mate...
PS. I spent almost a week to switch between KK snd LP. Even S6 was easies with V4A
Worked great. Thanks
works great on my sm-T700 thanks..
Works great on my MOAR S5
will try on the tab s t705c.
3DSammy said:
Flash ViPER4Android-supolicy.zip and LolliViPER_TAB_S.zip
Click to expand...
Click to collapse
Hi and thanks a lot for helping others out with the notoriously difficult to install viper app.
I presume the supolicy zip is intended as an alternative to setting selinux permissive. Any negatives to using one method over the other?
Also, can you please explain what your application zip does exactly. Does it just install the original viper as a system application or did you make any other modifications?
Thanks!
schiphol said:
Hi and thanks a lot for helping others out with the notoriously difficult to install viper app.
I presume the supolicy zip is intended as an alternative to setting selinux permissive. Any negatives to using one method over the other?
Also, can you please explain what your application zip does exactly. Does it just install the original viper as a system application or did you make any other modifications?
Thanks!
Click to expand...
Click to collapse
Either method of getting V4A permissive mode will work but if you rooted and maintained KNOX the stock bootloader blocks SELinux from setting permissive mode so the supolicy is your only alternative. Besides I read a comment from Chainfire who indicates that using permissive mode system wide is poor security practice. On my Nexus 5 which is running marshmallow I found all I needed was two supolicies to get all my root apps running and they were for V4A and stickmount.
The supplied V4A flash file installs V4A in /system/priv-app, sets permissions and attempts to delete two apps that the stock Samsung firmware does not have. Those audio apps are in the Google stock firmware and do no harm as there is nothing to delete. The flash file is based off one for V4A on a Nexus 5. I choose to not delete the Samsung audio app as some people may want to back it up, besides I documented three ways to deal with that app.
I hope you enjoy V4A.
Sent from my SM-T800 using XDA Premium HD app
Dr.Ketan V4A fix for stock touchwiz android 5.0.2 work like a charm on my Tab S T705
Simple as install normal apk, one tap. Done. Here http://forum.xda-developers.com/showpost.php?p=61858278&postcount=3079
This thread is impressive it work !!!!
Thanks. Tried this on my tab S. Works.
RocketPlayer is another music app that works with V4A.
Wow, I wish I had seen this thread sooner. Maybe I can fix the sucky Bluetooth performance in my tab now! Can't wait to try it. Thanks!
Working perfectly in Galaxy Alpha (g850m - Exynos) with enabled root and native kernel, including the Mix Radio (without special settings).
Thank you so much you saved my travels to work !!!
Does V4A not work on KitKat? I decided to downgrade back to KitKat but can't get it to work.
noxarcana said:
Does V4A not work on KitKat? I decided to downgrade back to KitKat but can't get it to work.
Click to expand...
Click to collapse
Yes the app works on KitKat but the directory structure for apps on /system changed. I'd suggest going to the ViPER4Android XDA forum and searching for KitKat installs. That forum link is in the OP (first post).
Sent from my SM-T800 using XDA Premium HD app
3DSammy said:
Yes the app works on KitKat but the directory structure for apps on /system changed. I'd suggest going to the ViPER4Android XDA forum and searching for KitKat installs. That forum link is in the OP (first post).
Sent from my SM-T800 using XDA Premium HD app
Click to expand...
Click to collapse
Ok. Thanks for the reply!
Edit: So, I was't able to find anything there about Kitkat specific installation, but I did find someone that help me figure out what my issue was.
Wow.. Excellent its working on my samung J2 J200F
Very very thanks 3DSammy, I rooted my new samsung j2 only for viper4adroid and I tried a lot and failed and many times ended in boot loop but this time Great Success, Its working fine on Stock Rom with TWRP recovery. But its only working perfect in compatible mode only (normal mode just work for some seconds only then processing stopped) but no problem I am happy .
Fellow XDA members, I have made a flashable zip with my favorite dsp app that works with Nexus 6P.
I pulled out some files from CM13 and packed it with dsp 5.0.2 and now I’m going to share it with you.
This will write in /system
This package should work with all roms. No guarantees though, remember to back up your system first.
Working:
Bluetooth dsp
Headphone jack dsp
My setup:
Stock ROM MMB29P
Kernel: Franco r7
Recovery: latest TWRP
SuperSU 2.66
Busybox (might affect install script in recovery)
Do i have to flash it in recovery?
Prattham said:
Do i have to flash it in recovery?
Click to expand...
Click to collapse
Yup u do.
Sent from my so Dope 6P using Tapatalk
work well in all roms? it is necessary delete or freeze any file?
guta12 said:
work well in all roms? it is necessary delete or freeze any file?
Click to expand...
Click to collapse
I flashed it in screwd and working fine
No you do not have to do that if you already aren't using an equaliser such as audio fc or Viper
Cheers ?
Will this work on nexus 6?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 11:04 AM ---------- Previous post was at 10:57 AM ----------
Just tried it and it works
Sent from my Nexus 6 using Tapatalk
kasarona said:
Fellow XDA members, I have made a flashable zip with my favorite dsp app that works with Nexus 6P.
I pulled out some files from CM13 and packed it with dsp 5.0.2 and now I’m going to share it with you.
This will write in /system
This package should work with all roms. No guarantees though, remember to back up your system first.
Working:
Bluetooth dsp
Headphone jack dsp
My setup:
Stock ROM MMB29P
Kernel: Franco r7
Recovery: latest TWRP
SuperSU 2.66
Busybox (might affect install script in recovery)
Click to expand...
Click to collapse
how to remove dis getting fcs
nickhil90490 said:
how to remove dis getting fcs
Click to expand...
Click to collapse
Did you clear cache?
What is FC:ing? If it is dspmanager.apk then just delete it from /system/priv-app/
Or just restore the backup you made before flashing...
If you didnt and want a clean setup then dirtyflash your current rom
Hope this helped :/
Does it have any negative effect on the battery?
Well, I bit the bullet and flashed it...No FC's, but I can't tell any difference on any of my apps (YouTube, NetFlix, Shuttle+, ect...). My Main audio player is Poweramp, it has it's own EQ that over-rides system EQ's.
I'll mess with it more later and see if I can get it to work?
ROM: Screw'd 2/5/16 build
EX kernel: 1.0.8 build
No other mods (no busybox or Xposed).
UPDATE:
I messed around with it and It's working on a couple of my audio apps, but not YouTube or NetFlix (that I can tell).
tele_jas said:
UPDATE:
I messed around with it and It's working on a couple of my audio apps, but not YouTube or NetFlix (that I can tell).
Click to expand...
Click to collapse
Intresting, i only use the dsp for audio apps (actually, only spotify) and i have never thought about the effect in video apps..
Does the equalizers usually work with video apps?
kasarona said:
Intresting, i only use the dsp for audio apps (actually, only spotify) and i have never thought about the effect in video apps..
Does the equalizers usually work with video apps?
Click to expand...
Click to collapse
I can't say whether EQ's work with video apps, since the 6P doesn't have one included in the ROM.....But on other phones I've had, yes it does.
I know the Dolby Atmos + Viper mod works system wide, including video apps. But there is somewhat of a slight battery drain - and it works until I use PowerAmp, then it won't work again until I reboot my phone.... I like PowerAmps EQ better and have some presets saved, so will continue using that over any system wide EQ/DSP.
It'd just be nice to have something that works on video (YouTube, Netfilx, ect...)
tele_jas said:
It'd just be nice to have something that works on video (YouTube, Netfilx, ect...)
Click to expand...
Click to collapse
Works DSP+
hey folks!! many of us are searching AND ASKING for DOLBY for stock rom.... here i am giving you a guide for installing DOLBY ON STOCK ROM and how to enable it... NO ROOT NEEDED,NO UNLOCK NEEDED
CREDITS TO: NCOPREX (for development)
APP LINK:https://drive.google.com/file/d/1goTElG0STj7Fa9pilfZofsrnfgO9LLkd/view?usp=drivesdk
HERE I HAVE INSERTED SCREEN SHOT OF THE APP CHECK IT OUT
now lets see how to install and make it working:
1)install the app from above link
2)now open the app
3)and close it
4)now go to any music player
(recommended music player): jiomusic,google play music,gaana,saavan , spotify ,hungaama and other equlizer supported player
5)now in music player open equlizer icon or check in settings available according to music player
6)now turn on asus dolby on
7)now on equlizer select normal,classic,pop etc option according to your need......(DOLBY EQULIZER) option recommended
8)now you can enjoy your DOLBY SOUND ON STOCK ROM
THIS APP GIVES YOU GOOD SOUND YOU CAN ENJOY YOUR MUSIC........
TRY THIS METHOD AND COMMENT YOUR EXPERIENCE SO THAT OTHERS CAN COME TO KNOW ABOUT IT
wow thanks for sharing. can you port Asus pixel master camera? the super-resolution is not working.
tamal777 said:
wow thanks for sharing. can you port Asus pixel master camera? the super-resolution is not working.
Click to expand...
Click to collapse
Happy to hear already pixel master was ported by a developer so i can't port it and there is no use in it...
If needed i can try what about this app asus Dolby
guhanhifi said:
Happy to hear already pixel master was ported by a developer so i can't port it and there is no use in it...
If needed i can try what about this app asus Dolby
Click to expand...
Click to collapse
Can you share the link of the pixel master camera port? And anyway to use the dolby sound in youtube app?
tamal777 said:
Can you share the link of the pixel master camera port? And anyway to use the dolby sound in youtube app?
Click to expand...
Click to collapse
No u Cannot use Dolby in YouTube
hi, thanks for this
i have a question, how to use this asus dolby in mxplayer, or suggest me any other video player who support dolby
haroon2015 said:
hi, thanks for this
i have a question, how to use this asus dolby in mxplayer, or suggest me any other video player who support dolby
Click to expand...
Click to collapse
fx player support this
It works , better sound but my anti-virus said its a malware when ive installed it, is it safe to use?
is there any App update for Andriod Pie?
Asus zenfone m2 pie update after dolby is not work
abhijit890 said:
Asus zenfone m2 pie update after dolby is not work
Click to expand...
Click to collapse
It is working on my phone with the pie update
Link error
The app in OP is not by Dolby. It's just a renamed app. The real name of the app is LifeVibes MusicFX by NXP Software. Here's the original apk. All credits to the app developer(s).
not able to download the file through this link.
it shows the error that 'this link violets the google terms and conditions'
any help?
what can I do...
Hey link is not opening Please sent me another link from where i can download it
Please sent the link to [email protected]
-Computer guruji
Thankyou
The App is not working after the pie update
It just crashes when i try to open it ...can anyone here help me ..or is there any update to it
tamal777 said:
It is working on my phone with the pie update
Click to expand...
Click to collapse
Share the apk file plz
the given link is not [email protected]!!!!!