Database Develop

[OFFICIAL] CyanogenMod for DEVED VZW Note 3 (HLTE) [NIGHTLIES]

CM11.0 for the Verizon Samsung Galaxy Note 3 Developer Edition (Bootloader Unlocked Device)
INSTALLING CUSTOM RECOVERY AND/OR THIS FIRMWARE WILL VOID YOUR WARRANTY. UNDERSTAND THE RISKS.
CURRENTLY NFC SERVICE CAN DRAIN THE BATTERY BY LOOPING (DUE TO LIBS BUILT FOR NON-VZW NFC CHIPS).
TO FIX THIS FLASH THE FOLLOWING ZIP FILE AFTER ANY ROM .ZIP:
Mirror 1 (Goo.im)
Mirror 2 (Crackflasher)
A WORD ABOUT HOW THE GALAXY NOTE 3 WAS BROUGHT INTO THE CYANOGENMOD DEVICE SUPPORT TREE
This was not a magical event where the device is now fully supported on AOSP. Many devs worked very hard for quite some time to get this device working as it stands today (most of it done by the CM dev team). Each dev has done more than just what I'm listing below, but these are the highlights.
@noobnl / Utkanos both worked on the device bring up, config settings, ramdisk and debugging
Cyanogen did most of the kernel work bringing in the needed commits to bring the device up to CAF KK compliance
Arcee helped with some RIL and kernel issues
Slayher helped with debugging and testing
I worked on audio issues and am doing in-progress work on the new NFC chip in VZW/TMO variants
And several others (whom I'm forgetting) helped in other ways
DISCUSSION THREAD:
http://forum.xda-developers.com/showthread.php?t=2593464
OFFICIAL NIGHTLIES:
http://www.get.cm/?device=hlte
GAPPS:
http://wiki.cyanogenmod.org/w/Gapps
INSTALLATION:
Make sure your device is unlocked
Install TWRP or CWM recovery for the Note3
Download the ROM / Gapps and place on your SD card
Reboot to recovery
Make a backup of your stock software
Install the ROM / Gapps
Wipe Cache / Dalvik
Reboot and Enjoy
CURRENT KNOWN ISSUES
Don't expect NFC to work anytime soon it's a brand new NFC NXP PN547 chip. I'm working on it as I get time.
GPS lock issue(?)
The Samsung flip cover is currently not supported for turning off the screen when closed.
S-PEN is currently setup to work like a mouse interface. It's a WIP.
WANT TO CONTRIBUTE?
Please submit a patch to the CyanogenMod gerrit site if you want to help out.
WANT TO BUILD YOUR OWN?
Head over to https://github.com/cyanogenmod/android/tree/cm-11.0 and follow the instructions.
COMMENTS:
Through the build-up and debugging process, I've been using this as my daily for over a week now. And I can comfortably say.. you won't hate it, but there WILL BE bugs that are being worked out. Worth the flash? Make a backup in TWRP and find out.
XDA:DevDB Information
[OFFICIAL] CyanogenMod for DEVED VZW Note 3 (HLTE), ROM for the Verizon Samsung Galaxy Note 3
Contributors
Hashcode, noobnl, Cyanogen, Slayher, Utkanos, Arcee and the CM Dev Team
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: Unlocked / DevEd.
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2014-02-19
Created 2014-01-07
Last Updated 2014-05-14

Reserved

Reserved

Hashcode...
This is why you are the man. Thank you so much for this, finally I can get rid of TouchWiz. I just really like PURE Android, the way it's intended to be. The Note 3 as it should only be...
Again thank you.

Don't have the Dev Edition but thanks for maintaining so many devices. You are a huge asset to the community for all that you contribute.

Thank you very much for this.
Do you have any observations/comments/feedback about enabling ART?
Installed & working great. Definitely a daily driver for me.
Donation sent.

thanks i will be trying as soon as links are up!!!!

oneandroidnut said:
thanks i will be trying as soon as links are up!!!!
Click to expand...
Click to collapse
The links for the unofficial version are up. Downloaded and running great!

cam30era said:
The links for the unofficial version are up. Downloaded and running great!
Click to expand...
Click to collapse
i knew i should have brought my note 3 to work today!! ugh

only if i bought the dev edition...

Thanks Hash!!

Thank you Hashcode!

oneandroidnut said:
i knew i should have brought my note 3 to work today!! ugh
Click to expand...
Click to collapse
Thats ok you just stick with that HTC thang.

Awesome to see this, might have to sell my loki'd S4 and pick up a dev N3. Thanks!

dasx86 said:
Awesome to see this, might have to sell my loki'd S4 and pick up a dev N3. Thanks!
Click to expand...
Click to collapse
Last I heard they were going for a cool thousand bones on eBay. Good luck!
Sent from my SM-N900V using XDA Premium 4 mobile app

droidstyle said:
Thats ok you just stick with that HTC thang.
Click to expand...
Click to collapse
dont mess with my htc! i love it!

I ran the sprint build OK yesterday but today, I am getting SOD when my device goes to sleep. Clean install on Hash's build. Anyone else seeing this?
Sent from my SM-N900V using Tapatalk

aerichards1977 said:
I ran the sprint build OK yesterday but today, I am getting SOD when my device goes to sleep. Clean install on Hash's build. Anyone else seeing this?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
It happened to me once yesterday on Sprint cm11. So far, nothing today on this ROM.
Edit: no sooner did I type this than I got a SOD.

Thanks Hashcode! Running great!
Once I get out of debt from Xmas donation coming your way.
Edit: I had a sod while my phone was charging.

I haven't had one yet. I enabled developer options, then went into performance and my min processor speed was set to 1728 so I dropped it down to 300 and set to conservative. So far so good!
Sent from my SM-N900V using XDA Premium 4 mobile app

Unified Builds Listed

Here are a few builds I've found to work well on multiple Note 3 models, I am happy to build this list if you all post in some.
W03 SlimKat
Resurrection ROM
Not personally tested but claim to be universal
AOSB Project
I'm sure there are a number more. I personally own a Sprint N900P and feel like it does not get the attention the other variants do, so I was pleased to see some of these unified builds coming out and would love to see more!!
I'm not a dev, more an advanced fan boy. Keep up the kickin' work devs, we love you for it! :good:

svghost said:
Here are a few builds I've found to work well on multiple Note 3 models, I am happy to build this list if you all post in some.
W03 SlimKat
Resurrection ROM
Not personally tested but claim to be universal
AOSB Project
I'm sure there are a number more. I personally own a Sprint N900P and feel like it does not get the attention the other variants do, so I was pleased to see some of these unified builds coming out and would love to see more!!
I'm not a dev, more an advanced fan boy. Keep up the kickin' work devs, we love you for it! :good:
Click to expand...
Click to collapse
Thanks for looking out:good:

I don't think there is any need for this list, ALL the AOSP roms use CM build trees and since CM unified the branches in turn ALL THE AOSP roms have unified the branches.
Also these unified builds haven't just been "coming out", they have been out for months now.. This sub forum was made recently..
Sent From My SM-G900F-Morphed SM-N9005 With XNote Goodness To All You Wonder Nobodies!!
Due to the lack of mods, trolls can ruin the XDA forum's. Don't feed them...Instead report them.
Click to expand...
Click to collapse

Are all these roms for sanpdragon variants only or do they work on exynos too ???

iamsuperuser said:
Are all these roms for sanpdragon variants only or do they work on exynos too ???
Click to expand...
Click to collapse
i think it is for snapdragon version.

Wil M any of these builds work on Verizon phones running 4.4 with nc2 firmware?

will any of these roms work for exynos ?

ATT will it work
have any tried these roms on a att version if so let me know, thanks

svghost said:
Here are a few builds I've found to work well on multiple Note 3 models, I am happy to build this list if you all post in some.
W03 SlimKat
Resurrection ROM
Not personally tested but claim to be universal
AOSB Project
I'm sure there are a number more. I personally own a Sprint N900P and feel like it does not get the attention the other variants do, so I was pleased to see some of these unified builds coming out and would love to see more!!
I'm not a dev, more an advanced fan boy. Keep up the kickin' work devs, we love you for it! :good:
Click to expand...
Click to collapse
Great idea but if it can be verified what variants they work on that would be awesome. As I am on the N900S and those do not boot on my device.

Edit* sorry wrong forum.

iamsuperuser said:
Are all these roms for sanpdragon variants only or do they work on exynos too ???
Click to expand...
Click to collapse
All the AOSP roms are for snapdragon. Flash on exynos and you'll probably brick.
troc240 said:
Wil M any of these builds work on Verizon phones running 4.4 with nc2 firmware?
Click to expand...
Click to collapse
No you need an unlocked BL so these will only work in Verizon if you have the dev edition.
gupta_arth said:
will any of these roms work for exynos ?
Click to expand...
Click to collapse
No. Read above.
chamelio said:
have any tried these roms on a att version if so let me know, thanks
Click to expand...
Click to collapse
No you need an unlocked BL to flash AOSP roms.
droidstyle said:
Unified builds are for Sprint, VZW, ATT, and T-Mobile(HLTE)...these are not for international devices.
Click to expand...
Click to collapse
LOL you need to edit your post, you are in the international forum, most of the AOSP roms were released for international variant first. There are 2 international variants, 1 is exynos and 1 is snapdragon.
What you meant to say is this won't work on the exynos international variant. If you say they won't work international variant that's wrong cuz the n9005 is the snapdragon international variant.
Sent From My SM-G900F-Morphed SM-N9005 With XNote Goodness To All You Wonder Nobodies!!
Due to the lack of mods, trolls can ruin the XDA forum's. Don't feed them...Instead report them.
Click to expand...
Click to collapse

^Well this is kind of silly...I clicked on the unified development link from the VZW Note III forum and it brought me here. So I was assuming that I was in the
unified development for domestic carriers. My mistake.

The snap varients work together, look on the zip file or the thread name if it says "hlte" that means it's a universal note 3 build. That can be used on Sprint variant or tmo, Verizon etc...
Enjoy

Carefull, the Verizon Variant has an locked Bootloader, unless you purchased an Dev Edition. If i'm right, Hashcode supports the Verizon Variant, so better listen what he has to say > He's an Legend when it comes to Android...
Gesendet von meinem SM-N9005

strapped 3.75
HSD-Pilot said:
Carefull, the Verizon Variant has an locked Bootloader, unless you purchased an Dev Edition. If i'm right, Hashcode supports the Verizon Variant, so better listen what he has to say > He's an Legend when it comes to Android...
Gesendet von meinem SM-N9005
Click to expand...
Click to collapse
your right sir .
v3.75 :good:

not working
none of these work with at&t tried a lot of them and no luck

AOSP ROMs on N900P
I can say for sure that Carbon, AOSB and C-ROM ( using C-ROM 4.4.4 currently) will flash on the Sprint N3. I have had various issues with each, but if you read the threads you will see most issues are solved by flashing a custom kernel. Most, not all. Some issues are just AOSP related and haven't been solved yet. The threads usually clearly state that they are unified builds. When DL the ROMs I look for "HLTE" to use with my N900P. Be very careful to choose the correct kernel though. Make sure you DL and flash the correct TW or AOSP kernel accordingly.

Real_JESRadio said:
I can say for sure that Carbon, AOSB and C-ROM ( using C-ROM 4.4.4 currently) will flash on the Sprint N3. I have had various issues with each, but if you read the threads you will see most issues are solved by flashing a custom kernel. Most, not all. Some issues are just AOSP related and haven't been solved yet. The threads usually clearly state that they are unified builds. When DL the ROMs I look for "HLTE" to use with my N900P. Be very careful to choose the correct kernel though. Make sure you DL and flash the correct TW or AOSP kernel accordingly.
Click to expand...
Click to collapse
That should be fairly easy since there are only like 3 to choose from. 4 counting stock. That I'm aware of anyway. Beast, lean kernel, and temasec. I briefly toyed with the idea to port one but couldn't find a good guide and from what I did find couldn't make any sense of it. Tad more involved than I had hoped. Learning to use github is apparently step number 1.

Tmobile Port
DevilDog512 said:
That should be fairly easy since there are only like 3 to choose from. 4 counting stock. That I'm aware of anyway. Beast, lean kernel, and temasec. I briefly toyed with the idea to port one but couldn't find a good guide and from what I did find couldn't make any sense of it. Tad more involved than I had hoped. Learning to use github is apparently step number 1.
Click to expand...
Click to collapse
I am looking to port a Tmobile rom on Verizon Note 3. An updated rom port help/howto with support for 4.4 will be appreciated.
Thanks

Root sprint N900T
I am NOT able to find the program that I need to root without a PC. Please help! Thank you in advance for your attention.

Porting CyanogenMod 12

URGENT!
Found a man on the xda ready to help porting CyanogenMod 12 on our apparatus (g800h);
(he ported it to s3 Neo (this appart has exactly the same characteristics as our: Snapdragon 400, Adreno 305, 1.5Gb RAM, 16Gb built, the resolution is the same);
He is already trying to collect firmware, but he needs someone who knows English and can communicate with him, as well as understand what firmware, android and rom
Here is his gmail for communication (for example through the hangouts): [email protected]
(do not forget to say about the CM12 port on s5 mini (g800h));
This issue should be solved as soon as possible.

very good
some news?
hope it works, why the android 5.0 this very good.

lucas9242 said:
some news?
hope it works, why the android 5.0 this very good.
Click to expand...
Click to collapse
it is necessary to help people , without it he will not do anything

I have sent an email to the address provided above. Not sure if somebody else already has but I am willing to help out if they still need it...
Edit: Had a response back, I cannot help because I have the SM-G800F, not SM-G800H
Response back was
"Problem is that i dont have phone. If i had phone i would do it easily , but without phone i cant do anything. Also i can only help with qualcomm variant, i guess it is g800h, and you with g800f variant cant help me with that :/ sorry"

da_jok3r said:
Here is his gmail for communication (for example through the hangouts): [email protected]
(do not forget to say about the CM12 port on s5 mini (g800h));
Click to expand...
Click to collapse
sent msg. lets see. i'll keep you posted.

I got CyanogenMod 12 "working" now for the G800F. WiFi and Radio are not yet working but it should hopefully not be that difficult to do this.
It seems due to the Exynos 3470 the G800F is rather similar to the Galaxy Light which has already been ported to CM11/12 by TeamRegular (http://forum.xda-developers.com/android/development/dev-cyanogenmod-porting-t2918432). The repository for CM12 is here: https://github.com/cm-gardalte/
In the next steps I will compare my current state with that of the Galaxy Light repo and try to get WiFi and Radio to work. When I have a usable state I will post the ROM in the development section.
If other developers want to join, please tell me.
Edit:
As the G800F and G800H are too different (Exynos vs. Snapdragon) my CM12 port only works for the G800F and it is unlikely that it will work for the G800H with minor modifications. So please don't ask me about porting this to the G800H.

i am not a developer, but can support with testing.
g800f already rooted and twrp installed.
Point me out which image to test if you need support.
Br,
Gruna
hennymcc said:
I got CyanogenMod 12 "working" now for the G800F. WiFi and Radio are not yet working but it should hopefully not be that difficult to do this.
It seems due to the Exynos 3470 the G800F is rather similar to the Galaxy Light which has already been ported to CM11/12 by TeamRegular (http://forum.xda-developers.com/android/development/dev-cyanogenmod-porting-t2918432). The repository for CM12 is here: https://github.com/cm-gardalte/
In the next steps I will compare my current state with that of the Galaxy Light repo and try to get WiFi and Radio to work. When I have a usable state I will post the ROM in the development section.
If other developers want to join, please tell me.
Edit:
As the G800F and G800H are too different (Exynos vs. Snapdragon) my CM12 port only works for the G800F and it is unlikely that it will work for the G800H with minor modifications. So please don't ask me about porting this to the G800H.
Click to expand...
Click to collapse

Omg thank you so much
Sent from my SM-G800F

Great news. Thanks for your job man!.
Best regards
Enviado desde mi GT-S5830i usando Tapatalk 2

hennymcc said:
I got CyanogenMod 12 "working" now for the G800F. WiFi and Radio are not yet working but it should hopefully not be that difficult to do this.
It seems due to the Exynos 3470 the G800F is rather similar to the Galaxy Light which has already been ported to CM11/12 by TeamRegular (http://forum.xda-developers.com/android/development/dev-cyanogenmod-porting-t2918432). The repository for CM12 is here: https://github.com/cm-gardalte/
In the next steps I will compare my current state with that of the Galaxy Light repo and try to get WiFi and Radio to work. When I have a usable state I will post the ROM in the development section.
If other developers want to join, please tell me.
Edit:
As the G800F and G800H are too different (Exynos vs. Snapdragon) my CM12 port only works for the G800F and it is unlikely that it will work for the G800H with minor modifications. So please don't ask me about porting this to the G800H.
Click to expand...
Click to collapse
Thanks @hennymcc Really cool. -
just a point. did you fastboot flash the radio.img extracted from the stock g800f after you flashed the cm12 rom.
Somtimes you have to do that.

that are really good news!
Respect and thx for developing!
If you need somebody for testing, feel free to kontact me.
i've this device and i'm waiting for cm to use it.
with the samsung crap i don't want it to.
cya stiff

gruna said:
i am not a developer, but can support with testing.
g800f already rooted and twrp installed.
Point me out which image to test if you need support.
Click to expand...
Click to collapse
Thanks for the offer. At the moment not that much works. At least Wifi, BT, Radio and Audio are not working. I don't know how much time I will have this week to fix this. Let's see. At least I will try to get the repos to github so that others can built CM12 it too.
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
EnricoDNY said:
Thanks @hennymcc Really cool. -
just a point. did you fastboot flash the radio.img extracted from the stock g800f after you flashed the cm12 rom.
Somtimes you have to do that.
Click to expand...
Click to collapse
No, not yet. I am just at the beginning. The ril config is not yet complete, so maybe it works without flashin radio.img. But thanks for the hint.

@hennymcc
I looked devices with similar hardware and found the Moto G XT1068 (DUAL), which also has the Snapdragon 400, but is the MSM8226 while ours is the MSM8228. In your opinion, would this ROM to adapt to the S5 Mini DUOS?
Thanks.

kaiodduarte said:
@hennymcc
I looked devices with similar hardware and found the Moto G XT1068 (DUAL), which also has the Snapdragon 400, but is the MSM8226 while ours is the MSM8228. In your opinion, would this ROM to adapt to the S5 Mini DUOS?
Thanks.
Click to expand...
Click to collapse
Yes!
Sent from my SM-G800H using Tapatalk

i'll edit again, when i have more informations.

kaiodduarte said:
I looked devices with similar hardware and found the Moto G XT1068 (DUAL), which also has the Snapdragon 400, but is the MSM8226 while ours is the MSM8228. In your opinion, would this ROM to adapt to the S5 Mini DUOS?
Click to expand...
Click to collapse
At the first look MSM8226 and MSM8228 are very similar, Samsung even names its kernel config base file msm8226-....
The bigger problem might be camera, radio and other stuff that might be different between Samsung and Motorola. Better stick with a Samsung device - and use the Moto G 2nd Gen as a reference to see what the difference between the MSM8226 devices are. The Moto G port does not seem to be that complex so most code for MSM8226 seems to be already unified, or it is all as binary blobs in the vendor folder and might be Motorola specific.
The Samsung Galaxy S3 Neo seems to be very similar: both use an MSM8228 and Adreno305 graphics. Lollipop has already been ported to the S3 Neo:
http://forum.xda-developers.com/galaxy-s3-neo/orig-development/rom-cyanogenmod-12-s3-neo-t2983109
The kernel configs of the S3 Neo and S5mini also have the same base (msm8226-sec_defconfig), only the variants are different (msm8226-sec_s3ve3g_defconfig vs. msm8228-sec_atlantic3geur_defconfig). You can compare these files to see the differences between the two devices (maybe not that big). Also make sure that the base config has really the same contents (msm8226-sec_defconfig). At least this might give you an impression how similar/different both devices are and where you have to make changes.
If you want to compile the kernel, you can find the sources in this repo:
https://github.com/tobigun/samsung-kernel-smg800h
As Samsung enforces SELinux in the stock kernel, it might be better for the beginning to compile your own with SELinux disabled. Otherwise it will be too difficult to get it booting the first time. But you can also try the stock kernel if you want.

I put my changes for the G800F on github for those who want to try CM-12 on the G800F and are able to build it:
https://github.com/tobigun/android_device_samsung_kminilte.git
https://github.com/tobigun/android_vendor_samsung_kminilte.git
https://github.com/tobigun/samsung-kernel-smg800f.git
There is also a little patch to setup the repository:
https://github.com/tobigun/kminilte-patcher.git
No binary images so far as the radio still does not work.
The progress so far:
(Partially) working features:
Audio (basic support)
Wifi
HW accelerated gui
Bluetooth
Camera
MTP storage
USB-OTG (Keyboard, Mouse, USB-Audio but no mass storage so far)
Not working features:
Receiving and making calls
NFC
Fingerprint scanner
Untested:
Hardware sensors (Light, Orientation, Compass, Proximity, Acceleration)
Legacy sensors / Virtual sensors (Gravity, Linear acceleration, Rotation vector)
GPS

Great job, dev, I hope trynig your rom on my 800F this month :fingers-crossed::fingers-crossed::fingers-crossed::good::good::good:

Guys we working on porting CM12 for Qcom Variant 800H since some have requested for it if anyone is willing to test and help us in testing for this device it will huge help for us has we dont own the device if anyone wants to help us in getting cm12 very soon PM me saying your willing to test
Thank u and have a great day

I would like to help you but I'm on SM-G 800F...

[Kernel}[CM11][Source][WIP]Cyangenmod11 Kernel Source for Samsung Gear by Count

First of all, every credit goes to Count([email protected]). He did everything to port CM11 and its Kernel source to Gear 1.
Second, I am just a mere messenger. I am not the developer! I don't have any knowledge about building android. I just wanted to contribute to this amazing forum. If you have any question regarding complex android internal things, send them to Count himself to the email above.(Count and I are Koreans, so our English will not be good
Third, this is a development section. No noob or meaningless questions. I won't answer them(I am a student, so I don't have much time, either.).
Forth, this kernel's state is WIP(Work in progress). ANY damage or loss due to using this source is your own risk!
Fifth, this is my first time writing a thread. If I have to write something more(I heard about GNU, but not sure how it works), please kindly tell me.
Screenshots of CM11 is in attachments
I hope development of Gear 1 will rise once again with this kernel source.
Here is the Github link :
https://github.com/tyler6389/android_kernel_samsung_ls02
Enjoy
P.S. Count is working on CM12.1, too, but don't get excited. Too much issues in this moment.
https://youtu.be/rb0R_JeI6gg

[ROM][ALPHA][WIP]'DayDream' CM11 based Rom for Gear 1
A rom to test CM11 in Gear 1.
Warning! This rom is in early Alpha stage and is really laggy and unstable. Flash this at your own risk!
This is real CM11 based rom. Made by Korean developers(including Count). Looks really good.
Battery life is great, but again, this is really laggy and unstable! ANY damage or loss due to using this Rom is your own risk!
Working
Boot
Touch
Button
Not Working
Camera
Bluetooth pairing
and many thing I didn't(and doesn't want to) try.
Please don't fill this thread with nooby questions. The rom is mainly for developers who wants to build stable and fast rom.
Users can use it, but no spamming in this thread(e.g. XX doesn't work! halp!). Every feedback will be ignored unless you have a logcat or a really specific detailed explanations.
If you want development conversation, please contact Count with email(in OP).
Installation :
do a factory reset in TWRP
flash this rom
reboot(initial boot takes 5~10 minutes)
enjoy
Download :
http://sourceforge.net/projects/cou...FFICIAL-1.8-20150822-v700-Alpha1.zip/download
Thanks to :
Daydream Team
Count

Reserved

Another one in case

ddaggebi said:
First of all, every credit goes to Count([email protected]). He did everything to port CM11 and its Kernel source to Gear 1.
Second, I am just a mere messenger. I am not the developer! I don't have any knowledge about building android. I just wanted to contribute to this amazing forum. If you have any question regarding complex android internal things, send them to Count himself to the email above.(Count and I are Koreans, so our English will not be good
Third, this is a development section. No noob or meaningless questions. I won't answer them(I am a student, so I don't have much time, either.).
Forth, this kernel's state is WIP(Work in progress). ANY damage or loss due to using this source is your own risk!
Fifth, this is my first time writing a thread. If I have to write something more(I heard about GNU, but not sure how it works), please kindly tell me.
Screenshots of CM11 is in attachments
I hope development of Gear 1 will rise once again with this kernel source.
Here is the Github link :
https://github.com/tyler6389/android_kernel_samsung_ls02
Enjoy
P.S. Count is working on CM12.1, too, but don't get excited. Too much issues in this moment.
https://youtu.be/rb0R_JeI6gg
Click to expand...
Click to collapse
Great news, do you have the github source code for the cm11 and cm12?

@litan1106
Count ports CM from existing smdk4x12(exynos 4412) devices, so we don't have any sources for CM.

I flashed the cm11 apha1 for the gear, it's a bit slow but it's looking good.

litan1106 said:
I flashed the cm11 apha1 for the gear, it's a bit slow but it's looking good.
Click to expand...
Click to collapse
It is a sort of a variant of CM11. Mainly made for design.
Count said he had increased the performance by editing the Mali drivers, so hopefully it will be faster when he releases the next version.

any chance for android wear ?

ddaggebi WOW good work

atleast there is someone who is still interested in developing for our beloved galaxy gear wish looks better than the gear s2

Time to get the dust from my good ol' Galaxy Gear. First it was about time to get rid of Tizen on it. That downgrade manual here worked very well. (http://forum.xda-developers.com/showthread.php?t=2776157)
Just needed Odin 3.09 (http://androidhost.org/PVAIv) and Samsung's USB drivers (http://developer.samsung.com/technical-doc/view.do?v=T000000117) for downgrading. After this was finished and it was able to boot on the old Samsung Linux AND WITH working touchscreen, I did a reset and flashed TWRP from here with Odin: http://forum.xda-developers.com/showthread.php?t=2537338 Last part was adb sideloading this test ROM here. Of course not working at first due to missing ADB drivers. I modded these here: https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip with that android-winusb.inf http://pastie.org/10428849 Works really really nice. Not very useful yet, but it's SOO great to see work bein done on this old device

Wow, just wow. Almost 2 years after buying this I see that people are still developing for my watch !? and kitkat 4.4.4 (and soon lollipop it seems) means a possibility for android wear maybe ! That's cool ! Big up from France to the dev if he comes here ahah
Is there a way like with null_ rom thought to still be able to have notifications on it like with TW rom ?

This looks so sweet. Hopefully Bluetooth pairing works out soon. would really like to try this out, downloading Rom now.
Thanks for all the hard work on this to all involved

Any work still being done on this?

Wait, you can install CM11 on a gear 's? Wouldn't you lose all Bluetooth stuff?

754boy said:
Any work still being done on this?
Click to expand...
Click to collapse
Developers says he is still working on perfecting cm11 and making cm12.1. It will take some time 'cause he has many devices to develope for.

illistration said:
Wait, you can install CM11 on a gear 's? Wouldn't you lose all Bluetooth stuff?
Click to expand...
Click to collapse
Yes, as the op says bluetooth pairing does not work at the moment.

I see.

[ROM]s CyanogenMod CM-14.1 (Android 7.1 Nougat) for H811

I've begun building CM-14.1 (~AOSP 7.1 Nougat) for LG G4 H811 (T-mobile). I intend to upload new builds about weekly, or more frequently when I have time and cool things happen in the code. I will do this until cyanogenmod starts creating "nightlies" for the H811.
Find the ROM zips here.

wseverin said:
I've begun building CM-14.1 (~AOSP 7.1 Nougat) for LG G4 H811 (T-mobile). I intend to upload new builds about weekly, or more frequently when I have time and cool things happen in the code. I will do this until cyanogenmod starts creating "nightlies" for the H811.
Find the ROM zips here.
Click to expand...
Click to collapse
what works and what doesnt.? a list of non working things will be nice.

raptorddd said:
what works and what doesnt.? a list of non working things will be nice.
Click to expand...
Click to collapse
That's what users post here. I try to note some of the major issues I find on the individual download pages, but I don't attempt to test everything on every build. After all, there's millions of lines of code! I push the build to my phone, fire it up, and if it doesn't smoke the phone I push the build to androidfilehost.
Users tend to use their phones for different things. Some are big into game playing. I don't play games on my phone. Some send hundreds of texts per day; I don't. Some take lots of selfies and movies. I don't. So, you see, it's up to the users to discover what works and what doesn't and share the knowledge. Here is a good place to do that.

As of today the build is good enough that I'm using it as my daily driver. The only major outstanding issue that I've so far discovered is that external SD access by MTP USB still isn't working. Must use ADB or use MTP from TWRP. The GPS and SIM recognition issues seem to have been resolved.
https://androidfilehost.com/?w=files&flid=126235

wseverin said:
As of today the build is good enough that I'm using it as my daily driver. The only major outstanding issue that I've so far discovered is that external SD access by MTP USB still isn't working. Must use ADB or use MTP from TWRP. The GPS and SIM recognition issues seem to have been resolved.
https://www.androidfilehost.com/user/?w=settings-dev-files&flid=126235
Click to expand...
Click to collapse
Tried to DL. Dont have permission to access folder????

billyboy2316 said:
Tried to DL. Dont have permission to access folder????
Click to expand...
Click to collapse
Sorry, I must have grabbed the URL while I was still logged into androidfilehost. Here's the correct URL:
https://androidfilehost.com/?w=files&flid=126235

wseverin said:
Sorry, I must have grabbed the URL while I was still logged into androidfilehost. Here's the correct URL:
https://androidfilehost.com/?w=files&flid=126235
Click to expand...
Click to collapse
Thanks, working:good:

wseverin said:
I've begun building CM-14.1 (~AOSP 7.1 Nougat) for LG G4 H811 (T-mobile). I intend to upload new builds about weekly, or more frequently when I have time and cool things happen in the code. I will do this until cyanogenmod starts creating "nightlies" for the H811.
Find the ROM zips here.
Click to expand...
Click to collapse
Anything new on this project? I'm on T-Mo H811, but can see from the T-Mo updates page that only the G5 and V10 and Stylo 2 + are being considered at the moment.

somenothingness said:
Anything new on this project? I'm on T-Mo H811, but can see from the T-Mo updates page that only the G5 and V10 and Stylo 2 + are being considered at the moment.
Click to expand...
Click to collapse
Cyanogenmod reached his end mate, new builds will be under Lineage OS not cyanogenmod's. There's another ROM's like RR, Cypher or DU for H811 on 7.0/7.1, just look into LG G4 forum not TMO LG G4 directly.

somenothingness said:
Anything new on this project? I'm on T-Mo H811, but can see from the T-Mo updates page that only the G5 and V10 and Stylo 2 + are being considered at the moment.
Click to expand...
Click to collapse
Cm and stock firmware isnt the same.. Stock or based stock roms are roms using tmobiles stock firmwares.. So far we got marshmallow no nougat yer.. When theres no more updates then you use cm or aosp rom. To update to latest say next version after nougat... Have in mind that using cm its faster and better battery but camera quality its not on par with stock.. Framework they use a feneric.

As of 01/22/2017 I'm running this ROM and it's been solid so far. I had a little issue with the initial install at first it kept asking me to transfer my info from another Android device but after restarting it, all went well. Everything works except the Bluetooth. If I'm not mistaken , CM has always had a Bluetooth problem. Anyone know any trick to make it work?? But overall thank you for bringing Android N to my G4!

Currently On the 1/28 nightly and it's still going strong. The Bluetooth is working correctly and the user icon in the notification draw works as well. Keep up the good work. It's been my daily driver for a week now.

so it's safe to use coming from stock rom? Is it reliable?

Is there xposed framework out yet by rovo89 supporting this rom?

DAXX said:
so it's safe to use coming from stock rom? Is it reliable?
Click to expand...
Click to collapse
I had no issues coming from stock. As far as Xposed , it isn't compatible with Android N yet. But this ROM has everything you need IMO.

Any updates planned beyond 3/16? It's been running on my G4 since the day of release and incredibly stable.