LineageOS 13.0 for Samsung Galaxy A700FD
Code:
/*
* Your warranty is now void.
* The ROM is under developement and have some bugs.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, I will laugh at you.
* By flashing this ROM, you accept this disclaimer.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Warning : This LineageOs 13.0 is only for A700FD Variant. DO NOT INSTALL ON ANY OTHER VARIANT!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Firmware LineageOS 13.0 Android 6.0.1. Based on the drivers with the latest stock firmware A700FDXXU1CQC3.
Kernel in enforcing mode, compatible with SafetyNet test and AndroidPay.
Status: stable.
Date 2017-10-21
Download latest version
Instalation
For update:
1. Install firmware by TWRP without wipes
For the first installation:
1. It is highly recommended to switch to firmware from the last stock for Russia (A700FDXXU1CQC3 or A700FDXXS1CPK1)
2. Use TWRP
3. Make Wipe data / Factory Reset from TWRP (Wipe -> Advanced Wipe. make selection Dalvik Cache, System, Cache, Data)
4. Install firmware by TWRP
6. Install Gapps for version Arm, 6.0.1 if needed
7. For Root flash SuperSu, or root addon for developer menu addonsu-arm-signed.zip
8. Can use ViperFx without root. Install By TWRP.
Bugs:
Tell me
Thanks:
jackeagle for TWRP and CM-13.0
4pda-forum users retvain, M0nt, Vadoha153 for test firmware.
Changelogs:
Build 6 (2017-10-21)
Fix crash at latest update Nova Launcher.
Build 5 (2017-10-13)
Improved GPS performance. Support for A-GPS. More satellites, faster and more accurate determination of coordinates.
Can use ViperFx without root. Install By TWRP.
Build 4 (2017-05-270
The kernel is switched to enforcing mode, with the possibility of switching to a permissive.
Positive verify in SafetyNet testing.
Can use AndroidPay.
Build 3 (2017-04-30)
FM-Radio.
Fixed a bug with non-working bottom buttons.
Working mode in gloves.
Fixes in camera settings (ISO).
Significantly reduced power consumption. Doze is activated.
Wi-Fi Direct.
LiveDisplay.
Build 2 (2017-04-19)
Update drivers from latest stock
Reduced power consumption
Build 1 (2017-04-03)
Initial version
Cool! Is it possible to port this to A510FD (Galaxy A5 2016) since the specs of A7 and A5 are the same ?
XenRon said:
Cool! Is it possible to port this to A510FD (Galaxy A5 2016) since the specs of A7 and A5 are the same ?
Click to expand...
Click to collapse
No, this rom to Galaxy A7 2015 (A700FD).
Thanxxx for this awesome rom..but can you plz add indian csc so we can use volte ..is it possible???
The new build is indeed good on battery consumption. Impressive sir !
On way to work, will check out the FM too and report later today.
Update:
After a day or two, the phone has settled and there is no heating up. Loved the new Camera app, is much better than the previous. The ROM us becoming more stable now @SergeySDK. Am happy with your work.
The Moto FM Radio is getting stuck for me and caused a phone reboot too.
The ROM can be used as a daily driver now. And we can hope only good things now from Lineage 14 whenever it comes. :good:
Any other link to download this rom?
Sent from my SM-C7000 using Tapatalk
SergeySDK said:
No, this rom to Galaxy A7 2015 (A700FD).
Click to expand...
Click to collapse
Hi Sergey,
I have a A700FQ. Is it compatible with my device?
BZC said:
Hi Sergey,
I have a A700FQ. Is it compatible with my device?
Click to expand...
Click to collapse
No, in your phone has a different processor (Exynos), my rom for Qualcomm Snapdragon 615.
SergeySDK said:
No, in your phone has a different processor (Exynos), my rom for Qualcomm Snapdragon 615.
Click to expand...
Click to collapse
ok, thank you for the information.
Hi Sergey,
I have a A700H. Is it compatible with my device?
kunkun_212 said:
Hi Sergey,
I have a A700H. Is it compatible with my device?
Click to expand...
Click to collapse
I do not know, the specifications of the phones A700FD and A700H look similar, but I do not have a phone to check. You can check, but do not forget to make a backup.
Hello ,can the Chinese version of this phone use it(sm
-a7000)?
speaker not working
In latest update of 30/4/2017 back speaker is not working please send the solution asap
CryptoRishabh said:
In latest update of 30/4/2017 back speaker is not working please send the solution asap
Click to expand...
Click to collapse
Did you install the firmware according to the instructions?
First install the firmware A700FDXXU1CQC3 by odin, after doing a full wipe in TWRP (Wipe -> Advanced Wipe. make selection Dalvik Cache, System, Cache, Data)
SergeySDK said:
I do not know, the specifications of the phones A700FD and A700H look similar, but I do not have a phone to check. You can check, but do not forget to make a backup.
Click to expand...
Click to collapse
I tried install but this is my result
Could not detect filesystem for dev/block/bootdevice/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
Can't install this package on top of incompatible data.
please try another package or run a factory reset
Error excuting updater binary in zip '/external_sd/lineage-13.0-20170430-UNOFFICIAL-a7lte.zip'
Error flasing....
plz help me
kunkun_212 said:
I tried install but this is my result
Could not detect filesystem for dev/block/bootdevice/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
Can't install this package on top of incompatible data.
please try another package or run a factory reset
Error excuting updater binary in zip '/external_sd/lineage-13.0-20170430-UNOFFICIAL-a7lte.zip'
Error flasing....
plz help me
Click to expand...
Click to collapse
Go to PM...
Any plan on changing cm theme engine to substratum theme engine?
Sent from my SM-N920C using Tapatalk
Hi Guys,
So I recently got my hands on the A7 and was happy to see Lineage OS is available for the phone.
Managed to flash the ROM over the weekend, I must say it is running really well. very smooth! No issues to report as a daily driver.
But I did run into some issues with superuser but managed to resolve. My only other problem is TWRP, for some reason if I boot into recovery I can't get back into the ROM, I am stuck in bootloop recovery. The only way to fix is to reflash TRWP using ODIN over and over again, hopefully someone can shed some light on this matter.
Anyway, looking forward to future updates and hopefully LineageOS 14...
san_099 said:
Hi Guys,
So I recently got my hands on the A7 and was happy to see Lineage OS is available for the phone.
Managed to flash the ROM over the weekend, I must say it is running really well. very smooth! No issues to report as a daily driver.
But I did run into some issues with superuser but managed to resolve. My only other problem is TWRP, for some reason if I boot into recovery I can't get back into the ROM, I am stuck in bootloop recovery. The only way to fix is to reflash TRWP using ODIN over and over again, hopefully someone can shed some light on this matter.
Anyway, looking forward to future updates and hopefully LineageOS 14...
Click to expand...
Click to collapse
You use TWRP v3.0.2.0 (Build 4) from link from first post in thread? With this version there were no problems.
Related
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
These are the nightly builds of CM12.0 for the HTC One Mini 2.
To hear about the latest updates and changes to CyanogenMod as a whole, you can follow +CyanogenMod on Google+!
You can also follow me if you want.
Code:
#include <stddisclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions
You must unlock your bootloader or be S-OFF.
You must have a custom recovery installed.
Download the current HTC One Mini 2 build from the CyanogenMod site.
Locate Gapps.
Fully wipe your device from Recovery if you are not coming from CM11.0 already.
Reboot into recovery and install.
XDA:DevDB Information
CyanogenMod 12 for One Mini 2, ROM for the HTC One Mini 2
Contributors
u-ra
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2015-01-30
Last Updated 2015-01-30
Recovery error
Thank you for opening this new thread.
Since CM12, I get a recovery error on every OTA update, saying
Installing zip file '/cache/recovery/block.map'
Installing '/cache/recovery/block.map'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Verifying zip signature...
I:read key e=3 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:4 key(s) loaded from /res/keys
E:footer is wrong
E:Zip signature verification failed: 1
E:Error installing zip file '/cache/recovery/block.map'
Done processing script file
Yet, there is no problem to flash the zip manually. Any ideas?
audio problem
Installed CM12 and one noticeable bug is with the audio output. The audio output is very poor and is with cracking voices. Please help
What happened to CM11?
Updated to newest build and my phone is running CM12 now instead of CM11.
Is there any way to get CM11 back?
Didn't you do a backup before updating? On the CM website it says clearly:
Once on CM12 nightlies, you cannot downgrade back to CM11 without wiping – if you are thinking of just exploring the release, then take a backup of your existing installation if you want to go back to it.
I still get TWRP error on every update saying"zip file is corrupt". Can anyone explain me? Never had this on CM11 and I didn't change my recovery (v 2.8.1.0)
Not much traffic here. Does no one have the same TWRP update problem?
Just read this on TeamWin homepage in changelog for V2.8.5.0:
-Fix handling of mapped zip files for OTA updates (CM12 updater).
Might be this ?
change-log ?
bug list ?
Screen-shot ?
No more update problems since update on TWRP 2.8.5. Thanks to u-ra!
Where can I find a changelog?
Can anybody tell me if this is ready for daily use? Any serious problems?
Thank you!
Sent from my HTC One mini 2 using XDA Free mobile app
GPaul said:
Where can I find a changelog?
Can anybody tell me if this is ready for daily use? Any serious problems?
Thank you!
Sent from my HTC One mini 2 using XDA Free mobile app
Click to expand...
Click to collapse
Hi. I use it, there are some bugs but everything works. You can google Cm 12 changelog ?
Camera is alright?
// I see that camera is OK.
It's nice to see cm12 on this device. The google version of lollipop looks better than the sense lollipop (saw it on M8) in my opinion.
Any way to increase battery life? Kernel or some settings?
Sent from my HTC One mini 2 using XDA Free mobile app
Screenshots
I hope it is ok if I post some screenshots for others...
Hi
Can i Install another Gapps ?
which Gapps you recommends me ?
Please Add changelog & Bug list .
thanks
rasoooli said:
Hi
Can i Install another Gapps ?
which Gapps you recommends me ?
Please Add changelog & Bug list .
thanks
Click to expand...
Click to collapse
Check the PICO version. It is all you need.
http://forum.xda-developers.com/pa...pps-official-to-date-pa-google-apps-t2943900
CM12
I had great troubles with the ROM after upgrading from CM11 to CM12.
In that case, just be sure to wipe all data and everything should work just fine!
Using the Balanced or Power Saving profile the battery life is just fine. The camera is acceptable.
After a couple of hours of USING (more applications at a time) the device tends to get a little bit laggy. Sometimes I need to do a Soft Reboot to go back to normal. Anyway, the nightlies are getting better and better with every build. Keep up the good work!
I have installed this on my girlfriends Mini 2 and she's loving the upgrade to lollipop, I'm having one problem though, trying to install Viper4Android as the beats audio for the device isn't available any more obviously. The app install isn't going to be a problem, my problem is that I don't seem to have root access, I tried flashing SuperSU but it doesn't seem to be working. Have I missed something?
EDIT: Wish I could delete this, fixed it. feel very silly. flashed latest su.zip from chainfire
Shro said:
I have installed this on my girlfriends Mini 2 and she's loving the upgrade to lollipop, I'm having one problem though, trying to install Viper4Android as the beats audio for the device isn't available any more obviously. The app install isn't going to be a problem, my problem is that I don't seem to have root access, I tried flashing SuperSU but it doesn't seem to be working. Have I missed something?
EDIT: Wish I could delete this, fixed it. feel very silly. flashed latest su.zip from chainfire
Click to expand...
Click to collapse
You can gain root on cm12 from the Developer options menu. It is something like "Root acces"
Shro said:
I have installed this on my girlfriends Mini 2 and she's loving the upgrade to lollipop, I'm having one problem though, trying to install Viper4Android as the beats audio for the device isn't available any more obviously. The app install isn't going to be a problem, my problem is that I don't seem to have root access, I tried flashing SuperSU but it doesn't seem to be working. Have I missed something?
EDIT: Wish I could delete this, fixed it. feel very silly. flashed latest su.zip from chainfire
Click to expand...
Click to collapse
Was the rest of the viper4android installation succesful? I'm waiting to upgrade to lollipop since this is the most used feature of my phone.
CyanogenMod 12.1 is a free, community built distribution of Android 5.1 (LolliPop) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM12.1 for the Samsung Galaxy Tab 2 I705 VZW LTE version.
**IMPORTANT** I705VRBLL2 FW required,if you have taken the latest OTA, and were not already rooted/unlocked you will not be able to use this ROM.
There is not root/unlock solution for the latest OTA. See more info in the last few pages of the linked root /unlock threads below.
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions (These are all required)
ROOT and BOOTLOADER unlock required following the linked guides.
Flash THIS custom TWRP recovery with SELinux capabilities.
Download latest ALPHA from http://downloads.codefi.re/jrior001/cm/espressovzw.
Locate 5.1 Gapps via a quick Google search.
Wipe factory/data reset in recovery before installing CM12.1 (unless you are already on a CM12.1 build).
Reboot into recovery and install ROM and gapps.
Known Issues:
LTE radio - Acts up at times requiring a reboot. Causes wakelocks
GPS sometimes it works, sometimes it doesn't. Reboot usually fixes it.
CAMERA - 720p recording fails, all other resolutions work well
USB wakelocks after removing USB cable, "USB Connected" pop-up doesn't go away.
OTG/keyboard dock doesn't work at all
Overall device is smooth and stable minus the above listed issues. I will continue to work on these but wanted to get some feedback on this so far as well. I'm open to assistance if anybody else has one of these and some talent and wants to help.
Huge thanks:
@invisiblek and the rest of the Samsung MSM8960 device maintainers, without there work to follow this would have never happened..
These build utilize the existing samsung 8960 device trees and the 3.4 d2 caf kernel hosted at CM github as well as the following:
https://github.com/jrior001/android_device_samsung_espressovzw
XDA:DevDB Information
CM12.1 i705 TAB2 VZWLTE, ROM for the Samsung Galaxy Tab 2
Contributors
jrior001, jrior001
Source Code: https://github.com/jrior001/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: i705VRBLL2
Based On: AOSP
Version Information
Status: Stable
Created 2015-02-08
Last Updated 2015-09-05
Great...!!!...I see a bit lonely here....whatever..great work sir.
–NigthFury– said:
Great...!!!...I see a bit lonely here....whatever..great work sir.
Click to expand...
Click to collapse
It is lonely here but whatever, i'm still working on it in my spare time. Fixed camera in new build i just uploaded. Also BT is working, sort of....sometimes. Not sure whats going on with BT but i'll keep at it.
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
rippedwarrior69 said:
I have been waiting for this forever thank you so much. I was almost giving up on this tablet. Thank you for the hard work. I love me some lollipop.
Click to expand...
Click to collapse
I'm not as experienced as some others so this took 3 attempts I think...in between 3-4 month breaks to get the 3.4 kernel booting but I finally got it.
I've got GPS fixed and I'm close on USB. Its proper in windows I think but Linux connectivity is still giving me issues. I'll try to get a new build up in a few days with all that.
I my self am on linux. I use elementray os.
2/28 build is up now, GPS and USB should be proper. OTG/dock still not working but not a major concern for now.
The new update says 403 forbidden when trying to download?
rippedwarrior69 said:
The new update says 403 forbidden when trying to download?
Click to expand...
Click to collapse
Fixed, any issues or things not proper other than what ive mentioned please let me know
Is there a flashible zip for twrp 2.8?
rippedwarrior69 said:
Is there a flashible zip for twrp 2.8?
Click to expand...
Click to collapse
No, I could likely make one though.
Use the did method outlined in the old recovery thread or cheat like I do and download "flashify" from market to flash recovery
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
rippedwarrior69 said:
This ROM is great. I installed peel ir remote app but it says this tab does not have ir blaster. It does have a ir blaster. Is that only a touchwiz app?
Click to expand...
Click to collapse
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
jrior001 said:
I doubt IR is working at all...that's on my list to test/debug.
USB is still a little wonky, the notifications never clear.
Click to expand...
Click to collapse
Oh OK that's cool. Thank you again for the hard work.
rippedwarrior69 said:
Oh OK that's cool. Thank you again for the hard work.
Click to expand...
Click to collapse
Just put up a fresh build, IR blaster seems to be working now.
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
jrior001 said:
For those who have tried this ROM, can anyone confirm whether or not wireless data is working? I don't have a vzw account to test with.
Click to expand...
Click to collapse
I don't either. Or I would.
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Nicklag said:
I can confirm that data is working. Thank you for breathing new life in this tablet
Edit. Had running for a full day and data works most of the time. A soft reboot fixes it though
Click to expand...
Click to collapse
If you wouldn't mind I'd like to see the logs when it craps out. I still have some hacks in place for debugging. When it acts up, reboot to recovery and grab the following:
/data/data/logcat.txt
/data/data/kmsg.text
/data/data/radio.txt
Oh and there is a newer recovery build and an updated build at the download link.
I'm dropping the "ALPHA" label at this point. Everything that should be working seems to be in order at this point and the builds are more than reasonably stable. I just uploaded a fresh build w/f2fs support on /data and /cache if anybody is interested in using that. Changing /data to f2fs will require a FULL factory reset and SDCARD wipe as sdcard is emulated on /data/media so be prepared to lose EVERYTHING. TWRP 2.8.5 is required if you wish to reformat anything as f2fs. Both are available at my codefire download link in the OP.
A few minor annoyances remain:
Charging is painfully slow.
USB OTG doesn't work at all.
Plugging USB to PC tends to create some nasty wakelocks.
LTE data is glitchy.
Keyboard dock support hasn't been brought in.
STRATUM OS for HOT2
For which devices, should work
with all versions that are infinix hot 2
Click to expand...
Click to collapse
IMPORTANT
Code:
* Do NOT expect daily builds. I'll build when I'm free.
* Do NOT ask for support for flashing in this thread.
* Do NOT use this unofficial build and ask for support at the official threads.
What is working?
Code:
Service
Text Data
Call
Audio
WiFi
Google Now
GPS
MMS
Video playback
Audio playback
Internal/External
SDcard mounting
Themes All Layer features
Screen Record
Bluetooth
Wifi Shared
Video Recording
Youtube 720p
Sync Reboot fixed
Move Apps to SD
Xposed
What doesn't work -
You tell us !
Code:
1) Please flash Infinix Rom 1st before flashing this ROM (I tried changing the updater script to AndroidOne firmware partitions but didn't help)
2) Some apps may have difficulty accessing systemless root (like es file Explorer) I used root browser and it worked just fine.
3) xposed Framework zip sdk23 version 82 or less will work just fine, versions 83 or more will work fine too but it breaks the stock gallery app causing it to FC.
4) If you want to have Google now on tap flash gapps (I flashed open gapps mini 6.0, open gapps aroma won't even run)
5) Google plus FCs whenever you click on share or post a comment. I haven't figured out the cause yet (and it's not from xposed) tried even older apks and same out come. But you can view posts and even comment.
additional info BY @Bolumstar
Code:
Wipe data, cache, and dalvik cache
Code:
* Your warranty is now void.
Code:
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Download Link : HERE
Supersu v2.74 Link : HERE
Flashing Method
Flash ROM
Flash SuperSU
Flash Xposed (if you want)
Reboot !
Credits:
Android Open Source Project.
Obaid Muneer
Aditya Kumar
Anuta Lores
DroidPeepz™ Inc
Pharaohs Team
Dev.Muttahir Aon Syed
Dev.Frank Boateng
Dev.Coulibaly Nonta
Dev.Hasan Al-Hallaq
Dev.Hussein Medhat
Dev.Mazen Yasser
XDA:DevDB Information
[ROM][6.0.1][AOSP][PRO/Layer]STRATUM OS for HOT2, ROM for the Infinix HOT 2
Contributors
Ibrahim Fath El-bab, Mahmoud9873, iykeDROID
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Stable
Created 2016-07-05
Last Updated 2016-07-18
Good work done
...keep it up
@iykeDROID™
Great Work ! <3
iykeDROID™ said:
Good work done
...keep it up
@iykeDROID™
Click to expand...
Click to collapse
thanks bro
Mazen Yasser said:
Great Work ! <3
Click to expand...
Click to collapse
thanks Mazen
Hey I was wondering how you got the 3.18.XX kernel to boot on MT6580 chipset. I've been trying to get 6.0 for my MT6580 device (Cubot Note S) however the stock rom kernel is only 3.10 so I've only managed to get 5.1 custom roms to work.
Great Effort Guys and the best MM ROM for Hot 2.
I've been playing around it for about a week now and am so happy and satisfied with it's performance and battery life.
Here are additional info:
1) Please flash Infinix Rom 1st before flashing this ROM (I tried changing the updater script to AndroidOne firmware partitions but didn't help)
2) Some apps may have difficulty accessing systemless root (like es file Explorer) I used root browser and it worked just fine.
3) xposed Framework zip sdk23 version 82 or less will work just fine, versions 83 or more will work fine too but it breaks the stock gallery app causing it to FC.
4) If you want to have Google now on tap flash gapps (I flashed open gapps mini 6.0, open gapps aroma won't even run)
5) Google plus FCs whenever you click on share or post a comment. I haven't figured out the cause yet (and it's not from xposed) tried even older apks and same out come. But you can view posts and even comment.
So far, this is my daily driver now. Well built Rom.
Thanks to all involved in Porting this ROM.
i couldn't flash it, it gives me error 7 :/
ProRedFed said:
i couldn't flash it, it gives me error 7 :/
Click to expand...
Click to collapse
flash Infinix Rom before flashing
You know Infinix ROM require SP tools to flash right?
What do you mean my system less root?
Well built ROM, Great work!!! Minor concern; clicking system update in settings force closes it, any reason??
---------- Post added at 01:40 PM ---------- Previous post was at 01:31 PM ----------
essgen said:
You know Infinix ROM require SP tools to flash right?
What do you mean my system less root?
Click to expand...
Click to collapse
You can also simply use the Infinix Flash Tool!!
System less root is a modified root access strategy which doesn’t modify any files in the /system partition especially on devices running marshmallow, makes it easier to even install OTA Updates!!!
Please i want to flash this.......does it have the 3G only on 1 sim issue?
Marshe said:
Please i want to flash this.......does it have the 3G only on 1 sim issue?
Click to expand...
Click to collapse
No it doesn't
Great effort guys.. Does is support OTG?
Ibrahim Fath El-bab said:
flash Infinix Rom before flashing
Click to expand...
Click to collapse
yes, i've already done that but no success
Am unable to flash it using twrp. Am running stock infinix ROM 5.1. am getting a filesystem ext 4 dev block/mmc error. Am trying to upload a screenshot Buh my browser keeps bouncing the page. please help
I've successfully flashed it..... thanks. can't seem to get the layers manager themes working though
Marshe said:
I've successfully flashed it..... thanks. can't seem to get the layers manager themes working though
Click to expand...
Click to collapse
i get a filesystem ext 4 dev block/mmc error every time i try to flash it just like you, how u passed that error ?
Very very nice work, amazing ROM in fact, very fluid and fast(maybe the fastest for this device) but gutted it doesn't support otg. Then
-layers don't seem to work(installs but after reboot nothing changes, still looks stock).
-layers app also force closes when you try to uninstall layers. (Can still b uninstalled another way)
-after changing nav bar from initial config(switching recents from left to right) recent button don't work.
Still a cracking daily driver for people that don't mind not having otg. Didn't test the camera tho cos am not a camera person.
Again amazing ROM
Many thanks to the devs.
Anushan said:
Hey I was wondering how you got the 3.18.XX kernel to boot on MT6580 chipset. I've been trying to get 6.0 for my MT6580 device (Cubot Note S) however the stock rom kernel is only 3.10 so I've only managed to get 5.1 custom roms to work.
Click to expand...
Click to collapse
FYI
the stock 6.0 of android one rom is 3.18.xx kernel, so it can be ported out easily without any problems appearing
Code:
#include <std_disclaimer.h>
/*
[COLOR="Red"]* Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
some words of wisdom:
WIP
Latest features :
XDA:DevDB Information
LineageOS 14.1 for Falcon (WEEKLY), ROM for the Moto G
Contributors
matmutant, luca020400, LuK1337, Google, LineageOS Team, Motorola
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-26
Last Updated 2017-02-01
Download & Install
LINKs:
All Downloads
Nightly Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
Either way, you might want to further customize your installation (both gapps and system apps), refer to this tutorial
REMEMBER:
ONLY use TWRP 3.0.2-1 or up
/!\ Before installing, read post #3. /!\
HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
NB: as with CM14.1, with a Lollipop compatible recovery like TWRP 3.0.2-0, you will get stuck to recovery, It is MANDATORY to update to 3.0.2-1.; the following error is still present : E:unknown command [log] but will not prevent install.
Place the rom and other like Gapps on the internal Storage or on a USB OTG
Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
Select the Zips
Swipe to install (if using TWRP)
Reboot and wait 2-3 min
HOW TO DIRTY UPDATE
Same as above, without the need of wiping of reflashing gapps.
HOW TO COME FROM CM13/14?
The Best practice way is to follow the clean install way.
BUT it is also possible to update from CM13/14 using an EXPERIMENTAL data migration build.
Here are the Official recommendations :
This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
This build may wipe permissions (you’ll have to re-allow app permissions), but should retain all user data
This build will be watermarked with an ugly banner to ensure that you don’t permanently run this EXPERIMENTAL release, and upgrade to a normal weekly after.
The process for this installation will be as follows:
Install EXPERIMENTAL migration build on top of cm-13.0 or cm-14.1 build (don’t try to install LineageOS 13.0 on top of CM 14.1, that will not work).
Reboot
Install LineageOS weekly build
Reboot
Re-setup your application permissions
Given the EXPERIMENTAL nature of this process, we are going to remove this option in two months time.
Click to expand...
Click to collapse
As Always, DO A TWRP BACKUP before trashing your device!
Notes, Bugs, and miscellaneous.
Tips and notes:
When choosing a Gapps package ensure it can fit into /system when flashed.
Nano gapps package is recommended as it fits and provides everything in a base package you will need for gapps support. Then, you can install the other google apps from the store later on if needed.
Remember nightly builds are experimental: they can and will be broken from time to time. Always have a backup at hand.
To transfer files from/to PC when plugged in you will get the charging mode prompt status in the status bar, then click it to change from charging mode to transfer files.
Considering the quite low amount of Falcon users left over here, I'm not sure about making a full-sized FAQ;
For now, the following will take that purpose:
[SIZE=+1]Q1: Question?[/SIZE]answer [SIZE=+1]Q2: How to get Root?[/SIZE]
go to : https://download.lineageos.org/extras
and choose "su (arm)" download.
It's been a long journey since I brought this device... Thank you so much Dev for supporting my 4 years old device... Downloading... LineageOS for falcon... Fingers crossed...
Long live falcon!
Great job!
Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks
Finally... Officially Supported.
thanks man.
Long live falcon and God bless the developers.
Sent from my Moto G using Tapatalk
theplagueisback said:
Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks
Click to expand...
Click to collapse
Basically, what worked on CM14.1 works on Lineage on this device, I didn't thoroughly tested it, but I didn't encounter much regressions after the migration (I performed the "Experimental" migration, to be in worse case scenario)
long live my (g)old device
ROM installed, so far so good, device performs as good as a brand new kick ass phone.
Keep up the good work!
Clean installed, seems to be good...
Someone tried if it works Xposed?
seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
:facepalm:
seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
Xposed is not yet available for nougat.
abeloman said:
:facepalm:
Click to expand...
Click to collapse
Sorry for not being at your senior level
BryanByteZ said:
Xposed is not yet available for nougat.
Click to expand...
Click to collapse
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat
seba2907 said:
Sorry for not being at your senior level
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat
Click to expand...
Click to collapse
I'm preying for that its the only thing that hold me on MM.
My 5X is dead. It's time to revive my g1
noice. falcon ftw!
Custom TWRP (TeamWin Recovery Project) Builds for Samsung Galaxy Note 4
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Fork of TWRP:
This UNOFFICIAL TWRP recovery is built for Samsung Galaxy Note 4 Snapdragon variants in EmotionOS/LineageOS Android 7.1.1 Nougat tree with correct device-specific SELinux policy. It fixed some warnings/errors and differs from the OFFICIAL TWRP in the following ways:
Designed to be built with LineageOS 14.1 only
Customize the mksh prompt and environment by editing mksh/mkshrc
Require fstab v2 syntax
Use external repositories for pigz, exfat, fuse
Power key toggles screen on/off
SuperSU and HTC Dumlock have been removed
Other customizations (see change history)
You can get the OFFICIAL TWRP recovery for Verizon Samsung Galaxy Note 4 (SM-N910V) from here. Other devices can find their variants in the device-specific forums.
Click to expand...
Click to collapse
Versioning:
To help distinguish builds of recovery made from this fork, the minor version digit is replaced with N#. Minor version increments will be handled as needed, independent of TWRP. The major and semi-major version digits follow upstream to roughly indicate feature parity (as close as possible with a fork, anyways).
Click to expand...
Click to collapse
Downloads:
Custom TWRP Builds for Samsung Galaxy Note 4
Click to expand...
Click to collapse
XDA:DevDB Information
TWRP, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/mdmower/twrp
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 3.0.N1-20170205
Stable Release Date: 2017-02-05
Created 2017-02-05
Last Updated 2017-02-05
Reserved
Reserved
Is this twrp required or recommended for your Emo-14.1 builds?
I've found a little bug.
When flashing (there were 3 files added to flash) I turned off the screen using the power button.
After that pressing back the power button vibrated but remained with the screen off, touching the screen had the same effect.
I just waited and turned the phone off.
Next time I flashed the same things without press the power button to turn off the screen and worked fine, even though the screen went off automatically.
razholio said:
Is this twrp required or recommended for your Emo-14.1 builds?
Click to expand...
Click to collapse
Curious about this myself.. and will it affect going back to other ROMs?
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Delete
TWRP themes dont seem to work with this.
so how exactly would you flash the tar?
6th_Hokage said:
so how exactly would you flash the tar?
Click to expand...
Click to collapse
.tar files are flashed in Odin. You can download the.img custom recovery and flash it in official TWRPapp from the link above
Sent from my Samsung SM-N910G using XDA Labs
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
Well I can confirm official twrp still works for 2/5 and 2/13 ROMs.
Every time I try to install emotionrom it never recognizes my sim, so I'm not sure if it's because I'm not using the right twrp.
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
IndyRoadie said:
Curious about this myself.. and will it affect going back to other ROMs?
Click to expand...
Click to collapse
happy2472 said:
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Click to expand...
Click to collapse
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
fastguy said:
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
Click to expand...
Click to collapse
Inquiring minds want to know
IndyRoadie said:
Inquiring minds want to know
Click to expand...
Click to collapse
Same questions here
Stuck in a bootloop on 910T...can't even boot into system.
TWRP issue on 910F
I've hit a bug with VERSION twrp-3.0.N1-20170205-UNOFFICIAL-trltexx.tar. Every time I flush with this recovery i get an encryption failed error. I've had to revert back to twrp-3.0.2-0-treltexx in order to flush my ROMs. Hope this helps someone out there.
I successfully loaded LineageOS 14.1 (Android 7.1.1) using a standard TWRP build (found on their Devices page) - I never knew about this build.