Hi, Would you recommend a compatible film with a slightly curved screen that completely covers the display but does not hang on the sides?
fraussantin said:
Hi, Would you recommend a compatible film with a slightly curved screen that completely covers the display but does not hang on the sides?
Click to expand...
Click to collapse
Check out the ones from Nilkin.
Sent from my Honor 8 using XDA Labs
Hi,
You might have already bought a good film, if not then a word of warning, I bought this from Amazon.de (can't link so....):
MaxKu Huawei Honor 8 Pro / Honor V9 Schutzfolie, [2 Stück] Glasfolie Hartglas 9H Hardness Panzerglas Displayschutz Anti-Kratz Displayschutz für Huawei Honor 8 Pro / Honor V9 (~8 euro).
... And I can tell you, it was like a millimetre to small on the sides, so completely useless.
MrHuman said:
Hi,
You might have already bought a good film, if not then a word of warning, I bought this from Amazon.de (can't link so....):
MaxKu Huawei Honor 8 Pro / Honor V9 Schutzfolie, [2 Stück] Glasfolie Hartglas 9H Hardness Panzerglas Displayschutz Anti-Kratz Displayschutz für Huawei Honor 8 Pro / Honor V9 (~8 euro).
... And I can tell you, it was like a millimetre to small on the sides, so completely useless.
Click to expand...
Click to collapse
Can't you return that item?
Sent from my Honor 8 using XDA Labs
MrHuman said:
Hi,
You might have already bought a good film, if not then a word of warning, I bought this from Amazon.de (can't link so....):
MaxKu Huawei Honor 8 Pro / Honor V9 Schutzfolie, [2 Stück] Glasfolie Hartglas 9H Hardness Panzerglas Displayschutz Anti-Kratz Displayschutz für Huawei Honor 8 Pro / Honor V9 (~8 euro).
... And I can tell you, it was like a millimetre to small on the sides, so completely useless.
Click to expand...
Click to collapse
looks like it's tempered glass?
iinm, unlikely to find a tempered glass that can cover the sides completely due to the 2.5D curve. if you can find, there's a good chance that the glue is only on the sides, which will give u other issues.
but it should still cover the display area right (i mean where there are pixels)?
Didn't bother with a return, didn't cost that much. And yeah, it was tempered class and it didn't even cover the screen (where the pixels are)... Had a nice typo on the box too, said "Protection of God"
MrHuman said:
Didn't bother with a return, didn't cost that much. And yeah, it was tempered class and it didn't even cover the screen (where the pixels are)... Had a nice typo on the box too, said "Protection of God"
Click to expand...
Click to collapse
I'm planning on getting THIS screen protector once I have the Honor 8 Pro
adriansticoid said:
I'm planning on getting THIS screen protector once I have the Honor 8 Pro
Click to expand...
Click to collapse
Let us know how it is. Might be getting one, going without atm.
MrHuman said:
Let us know how it is. Might be getting one, going without atm.
Click to expand...
Click to collapse
Sure man. But I'm still saving for it. I'll get one maybe in 3 months or so.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
I'm planning on getting THIS screen protector once I have the Honor 8 Pro
Click to expand...
Click to collapse
this one... it looks more like a film, right?
anyway, i've yet to get my Honor8Pro but have been looking out for accessories. some tempered glass screen protectors i've shortlisted (i hope i'm not breaking any rules by sharing):
nilkin | xxins | aierwill | cafele | sundatom
disclaimer: these are just some that caught my attention. i plan to check for reviews later -- to see if they have any major issues...
mydragoon said:
this one... it looks more like a film, right?
anyway, i've yet to get my Honor8Pro but have been looking out for accessories. some tempered glass screen protectors i've shortlisted (i hope i'm not breaking any rules by sharing):
nilkin | xxins | aierwill | cafele | sundatom
disclaimer: these are just some that caught my attention. i plan to check for reviews later -- to see if they have any major issues...
Click to expand...
Click to collapse
Yes it's a film rather than glass. It's hard to get full protection in tempered glass with a curved edge screen.
adriansticoid said:
I'm planning on getting THIS screen protector once I have the Honor 8 Pro
Click to expand...
Click to collapse
I bought the same, next week it comes.
Monday or Tuesday
letschky said:
I bought the same, next week it comes.
Monday or Tuesday
Click to expand...
Click to collapse
Wow please post some pictures for us to see.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Wow please post some pictures for us to see.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Yes, as soon as I have them I post photos
Has anyone experience with liquid glass?
letschky said:
Has anyone experience with liquid glass?
Click to expand...
Click to collapse
I do. They need to be reapplied after 6 months or so.
sniperlife:D said:
I do. They need to be reapplied after 6 months or so.
Click to expand...
Click to collapse
Ok Thanks..
How are the Quality from the Glass and it easy to bring it on?
letschky said:
Ok Thanks..
How are the Quality from the Glass and it easy to bring it on?
Click to expand...
Click to collapse
Gorilla Glass 3 is already scratched proof. But if you don't apply screen protection, there is a chance the oleophobic coating will fade. It's very easy to apply. Just give it a few drops and wipe it to spread.
Not sure if this is available in all countries but I am using https://www.gadgetshieldz.com/honor-8-pro-screen-protectors-covers-cases.html on my Honor 8 Pro since day one. I have used this for all my devices in the past 4-5 years.
As most of us would have realised, not really possible to get a tempered glass that will cover whole screen and not lift as the edges of this phone is curved 2.5D screen).
So i know some have resorted to just using film SP. I'm one of them. There is one recommended by another honor 8 Pro user. it's called X-One. link here:
https://www.x-one.asia/product/x-on...r-screen-protector-for-huawei/?v=7516fd43adaa
You can also find it on Amazon, etc... Depending on where you live.
I am currently using one called Hardwear. I was told it's actually the same as X-One -- Just a different name.
The film is clear and does not distort/ degrade the display. Cut out is a bit rough though. It does not cover the whole screen and what i noticed, there is still like 0.5mm on both sides of the display area that is not covered (display here means the part of the screen that lights up).
This is how it looks with generic clear case. Notice the cutout at the top -- it feels like a sloppy job. You can see towards the top... that little bit of the display area that is not covered. this is not because the SP was applied towards one side. it's applied very nicely...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The other side... Now with Ringke case
But still, I'm generally happy with the SP. It was better than the free tempered glass (TG) I was using. This TG had glue only at the sides and it was "masked" by having the ugly coloured borders. this TG didn't go well with the Ringke case -- the case lifted the TG. and what is worse... it came with tinted glass which was of poor quality and affected the screen quality. i had eye strains while using my phone. See:
Related
Hi to everyone,has anyone order and test this screen protector? I have just order mine and they reply to me that this screen protector has adhesive to the whole screen not only to the black borders.
http:// nillkin.org/smartphones-accessories/oneplus-accessories/oneplus-3-a3000/nillkin-oneplus-3-a3000-a3003-a3005-cp
Remove one space from the link,i will make a small review when i receive the screen protector.
Update.
I have just cancel the order check the conversation below.
On 31.08.2016, Panicos wrote:
> Hi there i have order the Nillkin Amazing CP+ tempered glass screen protector for Oneplus 3 (A3000 A3003 A3005) and i have just notice in the pictures that you don't have cut outs for the capacitive buttons,if actual don't have cut outs i wish to cancel my order,please advice, thanks
Dear Panicos,
We have changes regarding CP+ today evening, the production department
notified us regarding editing the mold of CP+ for Oneplus 3, it'll be
available in 3-5 days.
Sadly we can't exactly tell what's going to be modified.
We can send you TPU case in separated parcel for now and if you're OK to
wait the result of reissued CP+, we can send it later or refund later.
There are also an option of H+ Pro glass (it's transparent).
Thanks for understanding and awaiting your reply,
Nillkin.org team
i was just looking at ordering this one as well...
i wonder if the black edges cover actual display space like the OnePlus official one.
Clickable Link
noticed that this same screen protector is a bit cheaper on eBay...
I have order from there site just to be sure that is the real one and if i have a problem i will deal with directly. About the display space they claim that is a perfect fit ,in anycase is much cheaper than the official and any other TG out there that cover the all screen and the adhesive is in the whole screen protector how worst it could be.
For me the equation is easy to explain with this new protector: screen with all curved edges + flat* tempered glass above = bad combination.
*The new versión, like the older, both are completely flat.
When, in his first tempered glass, they consider as "normal" the halo effect due to the curvatures of the screen ... that's not normal.
The only who fits to the characteristics of the screen is the official of OnePlus and it is because it is made in two parts integrated in one piece, tempered glass flat and a curved frame (not glass) that adapts to curved parts from the screen. For this reason it is more expensive (there are others more expensive and worse, like RhinoShield $24.99), is like to buy two protectors. The problem with the official of OnePlus is you will lose 0.9 millimeters on the sides of the screen.
So, after having spent a lot of money in bad protectors, expensive and cheap, of premium brands and unknown ones (including the first Nillkin, I consider a great brand) I think by now I can live with the limitations of the official of OnePlus, by the way, it fits like a glove.
Any advise of a good screen protector?
I got the same udpate from nillkin, 3-5 days of delay. I hope it's good, will report once I will receive it.
One of the local resellers here in ph got it. I'll be getting 1 next week.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A3000
---------- Post added at 02:07 PM ---------- Previous post was at 02:06 PM ----------
It does have cut outs on the buttons.
Sent from my ONEPLUS A3000
mixtapes08 said:
One of the local resellers here in ph got it. I'll be getting 1 next week.
Sent from my ONEPLUS A3000
---------- Post added at 02:07 PM ---------- Previous post was at 02:06 PM ----------
It does have cut outs on the buttons.
Click to expand...
Click to collapse
Can you make a review? And post some photos with glass on OP3? It's thick? The lateral frame blocks the screen? Dot matrix? Glue on all surface?
I'll post an update when it comes.
Sent from my ONEPLUS A3000
mixtapes08 said:
I'll post an update when it comes.
Click to expand...
Click to collapse
Ok. Thanks
mixtapes08 said:
It does have cut outs on the buttons.
Sent from my ONEPLUS A3000
Click to expand...
Click to collapse
Do you know if the one you're getting is the v2, this pic could likely be v1 since production of v2 started sometime this week according to Nillkin
stryker09 said:
Do you know if the one you're getting is the v2, this pic could likely be v1 since production of v2 started sometime this week according to Nillkin
Click to expand...
Click to collapse
He receive it August 31. So i guess v2
Sent from my ONEPLUS A3000
I'll likely be buying from here - https://www.aliexpress.com/item/For...rotector-0-2mm-super-thin-9H/32688089953.html
But i want the one the is case friendly, i reckon it's better to pick the Non 2.5D one?
stanley08 said:
I'll likely be buying from here - https://www.aliexpress.com/item/For...rotector-0-2mm-super-thin-9H/32688089953.html
But i want the one the is case friendly, i reckon it's better to pick the Non 2.5D one?
Click to expand...
Click to collapse
The 2.5D one works fine with cases, but be aware that the H Pro series do not stick well on the edges, if you read the end of the item descriptions you will see that they specify this. I ended up taking it off, because it looked bad, but every case I had worked fine.
The CP+ does not have this issue from what I see.
alexferdean said:
The 2.5D one works fine with cases, but be aware that the H Pro series do not stick well on the edges, if you read the end of the item descriptions you will see that they specify this. I ended up taking it off, because it looked bad, but every case I had worked fine.
The CP+ does not have this issue from what I see.
Click to expand...
Click to collapse
Which one will work then? Looking to buy accessories and have them before the phone will arrive
Sent from my SM-G935F using Tapatalk
AvivEliyahu said:
Which one will work then? Looking to buy accessories and have them before the phone will arrive
Click to expand...
Click to collapse
The CP+
alexferdean said:
The CP+
Click to expand...
Click to collapse
wonder if it has 'glue' in the screen area and not just around it, so it will prevent touch issues.
does it have any issues putting it with cases? and also wonder if it doesnt have that pixels / rainbow effect
AvivEliyahu said:
wonder if it has 'glue' in the screen area and not just around it, so it will prevent touch issues.
does it have any issues putting it with cases? and also wonder if it doesnt have that pixels / rainbow effect
Click to expand...
Click to collapse
It has glue as far as I know, and no rainbow. Just check it on YouTube.
alexferdean said:
It has glue as far as I know, and no rainbow. Just check it on YouTube.
Click to expand...
Click to collapse
only found the 'regular' version of tempered glass on youtube ,thats why i asked
alexferdean said:
The 2.5D one works fine with cases, but be aware that the H Pro series do not stick well on the edges, if you read the end of the item descriptions you will see that they specify this. I ended up taking it off, because it looked bad, but every case I had worked fine.
The CP+ does not have this issue from what I see.
Click to expand...
Click to collapse
So you are recommending the Nillkin CP+ 2.5D? I want to use it with Neo Hybrid Case.
Found it here -https://www.aliexpress.com/item/For-oneplus-3-full-cover-glass-Nillkin-Amazing-CP-Anti-Explose-oneplus-3-screen-protector-2/32720417545.html?
Xioami Mi5S & Xiaomi Mi5s Plus glass & cases from Nillkin availble (11.11 discounts!)
Hi, Nillkin offers today discounts ~20% for their production. Xiaomi Mi5S is included (glass & cases).
Link for Mi5S: http://nillkin.org/smartphones-accessories/xiaomi-phones-accessories/xiaomi-mi5s-accessories/
Link for Mi5S Plus: http://nillkin.org/smartphones-accessories/xiaomi-phones-accessories/xiaomi-mi5s-plus-accessories/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for heads-up, ordered one
YMMV, but nillkin's H+ Pro gives "Halo Effect" on my Mi5s.
I have some crappy screen protector that doesn't cover all screen don't know are they all like that..
Sent from my MI 5s using Tapatalk
kojoti2 said:
I have some crappy screen protector that doesn't cover all screen don't know are they all like that..
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
No tempered glass covers all screen if you have 2.5D display.
Well it give ugly look...
Sent from my MI 5s using Tapatalk
We can find tempered glass curved for devices like the Xiaomi Note 2...
So why not for MI5S Plus ?
It's sad, because i'm sure manufacturers car make an edge curved tempered glass for other units...
deathknight said:
We can find tempered glass curved for devices like the Xiaomi Note 2...
So why not for MI5S Plus ?
It's sad, because i'm sure manufacturers car make an edge curved tempered glass for other units...
Click to expand...
Click to collapse
The curve on Mi Note 2 is very large, but only on the sides, it's called 3D glass, IIRC.
Mi 5s/Plus just add slight curve to all sides, which often called 2.5D glass.
Or maybe they are simply not out yet, the mobile is only around 3 or 4 weeks on the market so far.
I never have screen protector on previous phones only good case for now will keep this ugly one if i don't find something good will take it out...
Sent from my MI 5s using Tapatalk
Just take ipkay, Nillkin start bit..ing
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
finished?
Thanks!
awaaas said:
No tempered glass covers all screen if you have 2.5D display.
Click to expand...
Click to collapse
I know for a fact that the iPhone 6 has tempered glass protectors that cover the entire screen. I installed one for a friend and it looks indistinguishable from a screen without a cover (the parts of the protector that cover the bezels are already coloured in). Only problem is, since it makes the screen slightly thicker, some tight phone cases no longer fit.
This one for the Mi 5S looks just like the one I installed for my friend's iPhone 6. I have ordered it and will report back if it does indeed cover the whole screen. Otherwise, there is also this one which I will try if the first one doesn't fit well.
marcolorenzo said:
I know for a fact that the iPhone 6 has tempered glass protectors that cover the entire screen. I installed one for a friend and it looks indistinguishable from a screen without a cover (the parts of the protector that cover the bezels are already coloured in). Only problem is, since it makes the screen slightly thicker, some tight phone cases no longer fit.
This one for the Mi 5S looks just like the one I installed for my friend's iPhone 6. I have ordered it and will report back if it does indeed cover the whole screen. Otherwise, there is also this one which I will try if the first one doesn't fit well.
Click to expand...
Click to collapse
Please really do your feedback about those screen protectors!!
kesleybenedet said:
Please really do your feedback about those screen protectors!!
Click to expand...
Click to collapse
I received the first protector I mentioned but I still haven't received the phone yet :silly: Hopefully it will arrive in a week or so and then I can let you know for sure how it is. My initial impression is that it won't cover the whole screen, or at least, it will not curve over the 2.5D part because there is almost no curve on this protector. It certainly looks big enough to cover the entire screen judging by the thickness of the bezel area so I'm not sure how it's going to work. The curve is definitely a lot less than the protector I installed for my friend on his iPhone 6.
Anyway, I'll keep you posted. Good thing is, it was distributed by Amazon so I can definitely get a refund
kesleybenedet said:
Please really do your feedback about those screen protectors!!
Click to expand...
Click to collapse
I have the one in the link, full coverage...
My review?
De button work very difficult, i use back button alot and this is now under a little hole, i have placed the holes 98% on top but still this issue, so i removed it again, sadly
Here you have photos of Frosted Shield and tempered glass from Nillkin on my Mi 5s - http://onetech.pl/szklo-hartowane-nillkin-i-etui-frosted-shield-test-i-recenzja/
kesleybenedet said:
Please really do your feedback about those screen protectors!!
Click to expand...
Click to collapse
Sorry for the late reply. I did finally receive the screen protectors. Long story short, neither of them cover the 2.5D portion of the screen unfortunately. I will say though that they probably cover closest to the edge than any of the other screen protectors I've seen. There is also a benefit to not covering the 2.5D portion. As I said earlier, I got a friend of mine a 2.5D tempered glass protector for his iPhone (you can see it here) and even though it covered the entire screen to the point that you wouldn't be able to tell that there is a screen protector on there, it made it almost impossible to put on a case. Every case he tried were really tight and ended up pinching the protector so that an air bubble would always form near the middle of the screen. It wasn't a problem with the installation because the bubble never appeared with the case off. This doesn't happen with the two protectors I bought for the Mi 5S. As you can see from the screenshot, the protector ends just before it makes contact with the case and it's the same with two other case designs that I've tried.
If you do plan on picking up one of these, I recommend the one from Ultimate Shield (ebay link, not amazon) because the Anzhao one was not very good quality. All the cutouts for the home button, earpiece, capacitive buttons etc. fitted perfectly but there were already some minor scratches and tiny dents when it arrived.
Lastly, I will say that I am starting to think that maybe a normal screen protector would be better for the Mi 5S. Because of the little dent for the home button, adding an extra layer of glass on top of the original screen makes it a little more difficult to reach the fingerprint sensor. Maybe a thinner plastic film would work better.
krzysiekb92 said:
Here you have photos of Frosted Shield and tempered glass from Nillkin on my Mi 5s - http://onetech.pl/szklo-hartowane-nillkin-i-etui-frosted-shield-test-i-recenzja/
Click to expand...
Click to collapse
thanks for good review and _REAL_ photos of the case. I was trying to buy something decent on ebay and ended up sending back 3 different cases that looked not even close to what was on the original pictures.
Did you guys have any luck with screen protectors?
I purchased 2 on gearbest (transparent ones, not the ones with tinted bezels) and they look horrible, all the bezels and around the home button... it looks unsticked due to the slight glass curvature. I'll upload pictures once I can.
I had the same and threw them away 1 minute after installation because they didn't stick near the edges...
So I ordered these on Ali Express. They fit quite well but don't really 'stick' the same way as the thicker ones do on a perfect flat screen so there is a way dust can get under that screen protector...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Search for Nillkin screen protectors. This is the best in my opinion.
https://www.aliexpress.com/wholesal...e_id=AS_20170625020132&SearchText=mi6+nillkin
smooth_gl said:
Search for Nillkin screen protectors. This is the best in my opinion.
https://www.aliexpress.com/wholesal...e_id=AS_20170625020132&SearchText=mi6+nillkin
Click to expand...
Click to collapse
Any pictures to show what it looks like when stuck?
reb00tz said:
Any pictures to show what it looks like when stuck?
Click to expand...
Click to collapse
Here
And this one is from Cafele
smooth_gl said:
Here
Click to expand...
Click to collapse
Thanks! It appears there isn't the ugly edges because it is smaller than the curved parts, but coupled with a good "all around" bumper case, that should suffice...
i use a non brand, from Chinese, tempered glass.
but it's 3D, edge to edge, curved tempered glass, covers fully until the metal sides
it even works perfectly with a case, full protection till the edge of the case
not sure if it can be found outside my country though, since its a no brand thing
can post a pic if you guys want to see
@ ZackoFF96
Could you share a link to a shop where you bought it, please.
Thank you in advance.
+
Hi, I would love to see a pic!
Also how is the glare on it?
It seems strange that high quality screen protectors that cover the whole mi 6 screen are so hard to come by. The ones with the coloured edges are sufficient to cover up the defects around the edges but I find the glare on them terrible.
tkawa said:
@ ZackoFF96
Could you share a link to a shop where you bought it, please.
Thank you in advance.
+
Click to expand...
Click to collapse
ismael94 said:
Hi, I would love to see a pic!
Also how is the glare on it?
It seems strange that high quality screen protectors that cover the whole mi 6 screen are so hard to come by. The ones with the coloured edges are sufficient to cover up the defects around the edges but I find the glare on them terrible.
Click to expand...
Click to collapse
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte
ZackoFF96 said:
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte
Click to expand...
Click to collapse
Nice glass protector.
I'm using the Nillkin and it's pretty good also.
i use a non brand, from Chinese, tempered glass.
but it's 3D, edge to edge, curved tempered glass, covers fully until the metal sides
it even works perfectly with a case, full protection till the edge of the case
not sure if it can be found outside my country though, since its a no brand thing
can post a pic if you guys want to see
Click to expand...
Click to collapse
link ?
idan357 said:
link ?
Click to expand...
Click to collapse
here you go
ZackoFF96 said:
here you go, sorry for late reply, your post didn't appear in my notifications
the case is by cafele, the skin protector is from here
https://www.tokopedia.com/bbgadget/xiaomi-mi6-tempered-glass-3d-full-cover-curved-cnc-cold-carving
https://www.tokopedia.com/bbgadget/cafele-xiaomi-mi6-mi-6-ultra-thin-case-tpu-matte
Click to expand...
Click to collapse
Greetings.
I have a Kapaver solid case, specifically this ...
https://www.amazon.com/gp/aw/d/B071...s=Case+mi6&dpPl=1&dpID=51MwFWjHV3L&ref=plSrch
The case alone I recommend, the touch of the case and the design seems excellent, and gives a very good feeling of protection of the casing, the problem arises when I supplement it with a tempered glass screen protector brand SMTR that I purchased, in particular this ...
https://www.amazon.es/Protector-Pant...X76P4DZ0K67DWZ
The tempered glass soon after putting the case up, I tried with the 2 crystals that are included, and both are detached. They do not seem to detach on their own, but when they put the case on, they leverage and raise them.
My question is:
With a protector that protects curved edges may not happen to me?
What protector do you recommend me with a rigid case like the one I have?
Thanks in advance.
Enviado desde mi MI 6 mediante Tapatalk
canariohippie said:
Greetings.
I have a Kapaver solid case, specifically this ...
https://www.amazon.com/gp/aw/d/B071...s=Case+mi6&dpPl=1&dpID=51MwFWjHV3L&ref=plSrch
The case alone I recommend, the touch of the case and the design seems excellent, and gives a very good feeling of protection of the casing, the problem arises when I supplement it with a tempered glass screen protector brand SMTR that I purchased, in particular this ...
https://www.amazon.es/Protector-Pant...X76P4DZ0K67DWZ
The tempered glass soon after putting the case up, I tried with the 2 crystals that are included, and both are detached. They do not seem to detach on their own, but when they put the case on, they leverage and raise them.
My question is:
With a protector that protects curved edges may not happen to me?
What protector do you recommend me with a rigid case like the one I have?
Thanks in advance.
Enviado desde mi MI 6 mediante Tapatalk
Click to expand...
Click to collapse
I think my screen protector wouldn't fit with your case, since the lips of your case is far more towards the screen, my case's lips is shorter, just barely towards the screen
Hi, I have same screen protector as ZackFF96.
It can be bought from AliExpress, this is the exact one I purchased:
https://www.aliexpress.com/item/3D-...rved-Edge-Frosted-Protective/32828496451.html
You can find more listings if you search "mi 6 4d glass".
Just make sure it has a similar style plastic backing on the screen protector. This is the only type of glass screen protector I have found to be full cover and full glue on back of glass.
This type of glass screen protector goes almost to the edge of screen, it leaves about 0.25mm of glass around the edge. It also covers about 0.25mm of the sides of the screen, only noticeable in apps which have lines going down the very side of the screen.
I use this case and it fits perfectly with the glass screen protector.
https://www.aliexpress.com/item/For...-and-Silicone-Back-Cover-for/32688209331.html
Compatible with pretty much all cases, I think only the very bulky cases like wooden or big armour cases will not fit. You will need to have the screen protector applied almost perfect though, if too much to one side or corner the case will foul on the glass.
HELP
Hello , i buyed xiaomi MI6 and screenprotector nillkin H+PRO 9H can someone please can suggsest me the phone cover now witch fits perfectly. I really dont want that between the phone case and screenprotector that there will be ugly line between them (not covered area ) hope you guys understand my bad english . I would love to buy that one if you to alieexpress and search "xiaomi mi 6 black gold cover" and there the first one ( i cant post links because i am new user. is this cover and the class fits perfectly . ty for your help
I use a film of hydrogel ...
https://goo.gl/rCpDpZ
jurarj said:
I use a film of hydrogel ...
https://goo.gl/rCpDpZ
Click to expand...
Click to collapse
Mate could you post some pic? i would like to see the final result , i ordered as well.
thanks
Im a fan of totally clear tempered glass screen protectors, but all too often they have colouring on them.
One seller I've seen on ebay who is doing a completely clear one:
http://www.ebay.co.uk/itm/162634872550
One with coloured parts on Amazon UK:
https://www.amazon.co.uk/Galaxy-Note-Vigeer-Bubble-Free-Installation/dp/B074C4KX3G
Another on Amazon UK with coloured parts, different design:
https://www.amazon.co.uk/Protector-Alinsea-Shatterproof-protector-Installation/dp/B0744D5ZN8/
Surely whitestone is going to be the one to get again?
Oli2k said:
Surely whitestone is going to be the one to get again?
Click to expand...
Click to collapse
I contacted Whitestone. They said the domed glass should be released early September so we could have them before the release date (If the release date is actually Sept 15th).
I really like it on my S8+. A little thick, but no lack of responsiveness. Only other complaint is that dusk collects along the edge of it.
I will be waiting a bit before ordering one
Going with this one for now: https://www.amazon.com/Protector-Co...83391&sr=8-3&keywords=note+8+screen+protector
I have had pretty good luck with this company for a while.
I'd try out the tempered glass protectors but not for retail price. Hopefully they do better than what is available for the S8+.
Augman said:
Going with this one for now: https://www.amazon.com/Protector-Co...83391&sr=8-3&keywords=note+8+screen+protector
I have had pretty good luck with this company for a while.
Click to expand...
Click to collapse
been looking at this one too. I typically do not use screen protectors but will on the Note 8. Can you tell me how well these work with cases?
Thanks
gpvlog said:
been looking at this one too. I typically do not use screen protectors but will on the Note 8. Can you tell me how well these work with cases?
Thanks
Click to expand...
Click to collapse
I havent been able to find a glass screen protector that would work with a case. The other problem is that these screen protectors only stick to the edges of the phone.... If there was a flat screen option I would have bought that..............
Yes, I'm worried about using a tempered glass screen and a case.
BradPitt123 said:
Already ordered this from ebay.in
http://www.ebay.in/itm/272820131684?aff_source=Sok-Goog
Did anyone use this SP? share your review here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Doesn't look case-friendly
I used one from Armoursuit on my note 7 and liked it enough to put it on my s7e. Unfortunately they won't have any until the 15th. I order one similar and a tempered glass. Figure I'll try them both. Supposedly case friendly
Sent from my SAMSUNG-SM-G935A using Tapatalk
Circlel05 said:
I used one from Armoursuit on my note 7 and liked it enough to put it on my s7e. Unfortunately they won't have any until the 15th. I order one similar and a tempered glass. Figure I'll try them both. Supposedly case friendly
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
How are Armoursuit's screen protectors? Are they stylus-friendly?
fgr said:
I contacted Whitestone. They said the domed glass should be released early September so we could have them before the release date (If the release date is actually Sept 15th).
I really like it on my S8+. A little thick, but no lack of responsiveness. Only other complaint is that dusk collects along the edge of it.
Click to expand...
Click to collapse
its already listed on their website http://www.mobilefun.pl/64792-whitestone-dome-glass-galaxy-note-8-full-cover-screen-protector.htm and should be available soon
masi0 said:
its already listed on their website http://www.mobilefun.pl/64792-whitestone-dome-glass-galaxy-note-8-full-cover-screen-protector.htm and should be available soon
Click to expand...
Click to collapse
I saw that, they say due in stock in 3 to 5 days. I guess they ship from the UK though, because they said shipping to the US takes 10 to 14 days.
I'm hoping Amazon will get them in at the same time Mobile Fun does. Then I should have it in two days
Does anybody have a recommendation for a relatively inexpensive, but potentially "good" case-friendly glass screen protector?
Obviously, with nobody yet having the devices themselves, it's going to be difficult to assess whether fit, etc, is good, but if anybody has experience of a brand/manufacturer that has done good things on other devices with non-flat screens, then that could be useful to know - I don't plan to use my Note 8 without some protection, and I've always found plastic protectors to be poor with regard to feel and their oleophobic properties, and often attract dust.
I'm thinking I'll get something that will more than likely be cheap, but reasonably performing, until such time as there are reviews of different protector models with experience of being used on the Note 8 before committing myself to a bigger purchase, such as a Zagg or a Whitestone.
I think the only logical screen protector will be those ones that are similar to paint protection film applied on cars. I put one on my wifes S8, didnt look too bad, Used a bit of heat from the hairdryer.
Limeybastard said:
I think the only logical screen protector will be those ones that are similar to paint protection film applied on cars. I put one on my wifes S8, didnt look too bad, Used a bit of heat from the hairdryer.
Click to expand...
Click to collapse
Plastic protectors seem to fall into two categories; stretchy "military grade" stuff which can be a bit "orange peely" and grippy to the touch, and a film which seems to offer less protection, but suffer from finger prints.
Best plastic I've seen is the iCarez on the Note 4, which gave good protection and feel, but was a bit of a dust magnet.
I'll be getting a Skinomi Tech Glass tempered screen protector when they're available. Had them on the Note 2 and Note 5 and on the Tab S 8.4. Haven't disappointed me yet.
Tempered glasses don't fit right on curved edges and you have to touch screen harder for it to respond
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
Anyone tested this maker's protectors before?
Base Tempered Glass Screen Protector for Galaxy Note 8
https://www.youtube.com/watch?v=BeIEnYJRkZQ
Hello,
i am searching for a good tempered glass protection.
Any recommendations?
The ones for the regular mi 11 should be ok for the ultra as well.
Look for the big brands and check reviews.
I saw some recent ones that some glass screen protectors can mess up with the touch responsivity ( not adhering to the screen completely ) so be carefull
Good luck !
The best ones are full glue, also known as UV Tempered Glass. I don't know if the third-party companies are releasing one, but I hope they do.
White stone dome is one if the best.
Got my case and screen protector from here. Very good quality and fast shipping.
Search - Mi 11 ultra
nillkin.org
KATANA_TEAM said:
The best ones are full glue, also known as UV Tempered Glass. I don't know if the third-party companies are releasing one, but I hope they do.
White stone dome is one if the best.
Click to expand...
Click to collapse
i know them.
Are UV Glasses fully removable without glue residues?
Do know that?
mobile-freak said:
i know them.
Are UV Glasses fully removable without glue residues?
Do know that?
Click to expand...
Click to collapse
Yes, I'm using them for a couple of years. If you remove them, there will be no problem.
Wipe, if there will be any residue, with some alcool or window cleaner and all is fine. Won't affect your display in any way.
I want to warn you guys about nillkin. Their 3d max ds+ protective glass noticeably deteriorates the touch sensitivity.
kuba319 said:
I want to warn you guys about nillkin. Their 3d max ds+ protective glass noticeably deteriorates the touch sensitivity.
Click to expand...
Click to collapse
Damnit thats coming with my order. Figured the expensive ones work very well. Damn. Probably have to order a different one then....UV Glass it is then?....
It feels better naked tbh
RX1337 said:
Damnit thats coming with my order. Figured the expensive ones work very well. Damn. Probably have to order a different one then....UV Glass it is then?....
Click to expand...
Click to collapse
I think I will go UV mocolo.. works super good on my old op 7 pro
Link?
Mocolo UV LIQUID Tempered Glass Screen Protector for Xiaomi MI 11 - Clear | eBay
Find many great new & used options and get the best deals for Mocolo UV LIQUID Tempered Glass Screen Protector for Xiaomi MI 11 - Clear at the best online prices at eBay! Free delivery for many products!
www.ebay.co.uk
I used this one it's amazing love it it's better protected now
None of them work great on curved screens imo
I'd rather use it without any
Search for UV tempered glass screen protectors. Finicky to install but its the best for curved display phones.
The best ones are with UV, I have one from ebay and the finger print works 100% and the touch is almost the same. Any UV screen protector will do good. Try finding the full screen ones. I have this one and for 18e, you get 2 packs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use Gorilla IQ Sheild on my Note 10+.
It's a easy wet apply that lasts 6-12 months.
Coming up on 2 years, with zero damage.
The case provides most of the phone protection; make sure the case has raised display guards on all sides! I've been using the Zizo Bolt case.
It will absorb multiple 2-4 foot drops on to concrete with no damage... tested, by accidents.
blackhawk said:
I use Gorilla IQ Sheild on my Note 10+.
It's a easy wet apply that lasts 6-12 months.
Coming up on 2 years, with zero damage.
The case provides most of the phone protection; make sure the case has raised display guards on all sides! I've been using the Zizo Bolt case.
It will absorb multiple 2-4 foot drops on to concrete with no damage... tested, by accidents.
Click to expand...
Click to collapse
Can i have some links please?
xwonic said:
Can i have some links please?
Click to expand...
Click to collapse
Come on, Google it...
blackhawk said:
Come on, Google it...
Click to expand...
Click to collapse
i did and theres is no reference to mi 11 ultra...
xwonic said:
i did and theres is no reference to mi 11 ultra...
Click to expand...
Click to collapse
May not be out yet. Try their website.
The punched out the 10+ one fast.