{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Me, Teamwin
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
im happy i got to test this out thanks for allowing me to
Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Thanks for testing and confirming that it works
MESSI!!
You are a straight savage!! Everything works perfectly! Come payday I will definitely be donating. Thank you for your hard work and quick response times!
Now hopefully custom ROM development will start soon maybe not from Messi because he doesn't have the phone but maybe some one will since we finally have root and recovery i mean seriously it's a nice phone
MP260?
messi2050 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MS260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from So Please Consider donating using the link below if you appreciate my work
https://www.paypal.me/messi2050
Click to expand...
Click to collapse
Any way to get this working on the MP260 version??
@LandonCaviness
Yes it should work with both t mobile and metro variants
messi2050 said:
@LandonCaviness
Yes it should work with both t mobile and metro variants
Click to expand...
Click to collapse
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.
LandonCaviness said:
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.
Click to expand...
Click to collapse
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.
messi2050 said:
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.
Click to expand...
Click to collapse
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.
LandonCaviness said:
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.
Click to expand...
Click to collapse
You contact me at hangouts for a faster guiding.
Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Nathan which variant you have the tp260 or the mp260 variant ?
anyone tested it on mp260 yet ?
Landon, it's almost like youre pumping the brake with power button. Hold volume down on reboot, when you see LG, do a click down on fingerprint button, let go, then hold depressed...boom.twrp.
---------- Post added at 09:06 AM ---------- Previous post was at 09:00 AM ----------
It happens within 5-7 seconds. Took me a couple tries but its $ after that.
messi2050 said:
Nathan which variant you have the tp260 or the mp260 variant ?
Click to expand...
Click to collapse
I have the mp260
Here are screenshots shots
can someone send the stock boot.img? thnks
Nathan4923 said:
I have the mp260
Click to expand...
Click to collapse
Nathan4923 said:
Here are screenshots shots
Click to expand...
Click to collapse
@LandonCaviness
Seems there is something wrong with your mp260.
bizichild said:
can someone send the stock boot.img? thnks
Click to expand...
Click to collapse
For which variant ?
This is the tp260 one
https://forum.xda-developers.com/lg-k10/help/lg-k20-plus-help-root-t3587193/post72525397
messi2050 said:
@LandonCaviness
Seems there is something wrong with your mp260.
Click to expand...
Click to collapse
That certainly appears to be the case. I don't really know what to do from here. Maybe flashing back to stock and repeating the process?
Related
How to flash a factory image | Return to stock | Unroot your Nexus 5
Hello Nexus 5 Users!
I see many users that don't know how to restore their Nexus 5 to stock. It may come in handy, either when you want to RMA your phone, or you want to fix your mistakes.
This process consists of wiping and flashing every partition on your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING!!!
This process will wipe your phone completely. Backup your storage before you continue.
I am also not responsible if anything goes wrong.
You can backup apps and data using this app before you unlock the bootloader. No root required.
https://play.google.com/store/apps/details?id=com.koushikdutta.backup
DO NOT USE TOOLKITS!!!
They have a high probability of something going wrong if you don't know how to use them (which, if you managed to ruin your phone, probably is true).
I don't mean to offend toolkit creators. They did a great job. But don't risk bricking your phone just because you're lazy.
FOLLOW EVERY SINGLE STEP
or you will end up in a bootloop, or with a bricked phone, and we don't want that
Let's get started!!
Setting up
For this process, you will need to:
★Install adb and fastboot drivers. To do this, use this simple program:
http://forum.xda-developers.com/showthread.php?t=2588979
For MAC users:
http://forum.xda-developers.com/showthread.php?t=1917237
*Note: MAC users will have to write "./" before every command in this thread. For example : "./fastboot flash recovery recovery.img"
Linux users should know their stuff
http://forum.xda-developers.com/showthread.php?t=921169
★Download the latest factory images from here:
https://developers.google.com/android/nexus/images#hammerhead
★Extract the archive you downloaded (Use WinRAR). It should look like this:
★Unlock your bootloader (In case you haven't already)
http://forum.xda-developers.com/showthread.php?t=2507905
Flashing the factory images
There is more than one way to flash these images. Each give the same results, but the first is for lazy users
Method 1. Easy method.
★Power off your phone.
★Boot it in fastboot by pressing and holding Power Button + Volume Down at the same time.
★Connect your phone to your PC through your USB cable.
★Execute the flash-all.bat script (for Windows) or flash-all.sh(for MAC and LINUX) in the folder where you extracted the factory images.
**!!** For MAC: You'll have to edit the flash-all.sh, and add "./" before every fastboot command.
★Wait for everything to flash.
★After everything finished, select "Recovery" using the volume buttons.
★When a small dead Android appears, press Power Button + Volume UP.
★Select "Wipe data/factory data reset"
★Reboot. Your phone should be stock. :good:
Method 2. Long method (Same thing actually, but I'll mention it, just in case)
★Extract the image-hammerhead-krt16m.zip somewhere easy to access (On C:\image-hammerhead-krt16m for example). You will have the following files:
★In the same folder, from the original archive, extract "bootloader-hammerhead-XXXXXX.img" (rename it to bootloader.img) and "radio-hammerhead-XXXXXX.img" (rename it to radio.img)
★Power off your phone.
★Boot it in fastboot by pressing and holding Power Button + Volume Down at the same time.
★Connect your phone to your PC through your USB cable.
★Open a CMD window.
★Type the following commands, in this order (If you have a different folder, change the path)
Code:
fastboot flash bootloader C:\image-hammerhead-krt16m\bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:\image-hammerhead-krt16m\radio.img
fastboot reboot-bootloader
fastboot flash system C:\image-hammerhead-krt16m\system.img
fastboot flash userdata C:\image-hammerhead-krt16m\userdata.img
[B](Note: this command will wipe your device (including \sdcard), EVEN if your bootloader is already unlocked.)[/B]
fastboot flash boot C:\image-hammerhead-krt16m\boot.img
fastboot flash recovery C:\image-hammerhead-krt16m\recovery.img
fastboot erase cache
fastboot flash cache C:\androidimage\cache.img
★After everything finished, select "Recovery" using the volume buttons.
★When a small Android appears, press Power Button + Volume UP.
★Select "Wipe data/factory data reset"
★Reboot. Your phone should be stock. :good:
For both methods:
Optional, but necessary for warranty purposes - Locking your bootloader+ Resetting the tamper flag
The Nexus 5 has a thing implemented in the bootloader called a tamper flag. This shows if the bootloader was ever unlocked, kind of like the flash counter with Samsung devices. You can check it out by using this command
Code:
fastboot oem device-info
. If the tamper flag value is "true", then you'll have to reset it. The following steps will reset this flag, and lock your bootloader.
•So, first, go here: http://forum.xda-developers.com/showthread.php?t=2239421 (Thanks @osm0sis for the wonderful script)
Under "Flashable Zips", you will find the Nexus BootUnlocker script. Download it.
•Put the zip on your internal storage.
•Download the latest TWRP recovery image for the Nexus 5 from here: http://techerrata.com/browse/twrp2/hammerhead. Rename it to TWRP.img.
Now boot it. You do this by booting your phone in fastboot, and typing the following command:
Code:
fastboot boot path\to\TWRP.img
*Replace path\to\TWRP.img with the path to where you placed the TWRP.img. For example: C:\Users\X\Desktop\TWRP.img
TWRP recovery should boot.
•When TWRP finished booting, select "Install", then navigate to the Nexus Bootunlocker zip, select and install it. After it finished, use the back arrow at the bottom of the screen to go back, and reboot.
Now your bootloader should be locked, and your tamper flag should show "false".
And now you have a brand new Nexus 5 (software wise, at least)
Video Guides
Thanks @techfanatic9.
For Windows:
For Mac:
Another easy and fast tutorial made by @iTzGavin96
These don't contain the tamper flag reset step. Follow the steps above to reset your tamper flag value to "False" for warranty purposes.
If you now have 12 GB of storage instead of 28 GB, go to post #2
32 GB phone now shows 16GB?
This is a common problem with Nexus devices. Minor error, don't panic. Here is how to fix it
★Boot into STOCK RECOVERY (If you are running a custom recovery you must flash to stock)
★Clear cache
★Factory reset
If that didn't work, proceed with doing this:
Open a CMD window, boot your phone is fastboot, and write the following commands, in this order (Considering that you have extracted the images in C:\image-hammerhead-krt16m\)
Code:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash bootloader C:\image-hammerhead-krt16m\bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:\image-hammerhead-krt16m\radio.img
fastboot reboot-bootloader
fastboot flash system C:\image-hammerhead-krt16m\system.img
fastboot flash userdata C:\image-hammerhead-krt16m\userdata.img
(Note: this command will wipe your device (including \sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:\image-hammerhead-krt16m\boot.img
fastboot flash recovery C:\image-hammerhead-krt16m\recovery.img
Credits and Thanks:
@efrant
For his thread in the N4 section (http://forum.xda-developers.com/showthread.php?t=2010312)
@osm0sis
For contributing a lot with the tamper flag part
@dombera
For inspiring me to make this guide
@Chromium_
For not replying to my Hangouts messages
@jd1639
For helping me out with this thread.
@Prodeje79
For pointing problems out.
abaaaabbbb63 said:
Chromium_
For not replying to my Hangouts messages
Click to expand...
Click to collapse
I do my best
Jk, my school has WiFi jammers in some of the classes.
Sent using xda-developers app
Chromium_ said:
I do my best
Jk, my school has WiFi jammers in some of the classes.
Sent using xda-developers app
Click to expand...
Click to collapse
Really? That's..... evil!!
abaaaabbbb63 said:
Really? That's..... evil!!
Click to expand...
Click to collapse
Evil...more like illegal.
Bleah.. The Dotted divider looks horrible on Tapatalk....
Meh
Because I don't know better, why do you consider method 2 safer?
Is there an easier "hide root" or any way to unroot where AirwatchMDM or other MDM corporate software control crap is hidden?
I'm wanting to try register on airwatch then lock down airwatch and see if I could still use touchdown.
jd1639 said:
Because I don't know better, why do you consider method 2 safer?
Click to expand...
Click to collapse
Well, safer in the sense that you are more in control, and can only flash certain images, not all. I'll delete de safe part.
fintheman said:
Is there an easier "hide root" or any way to unroot where AirwatchMDM or other MDM corporate software control crap is hidden?
I'm wanting to try register on airwatch then lock down airwatch and see if I could still use touchdown.
Click to expand...
Click to collapse
If you have root through the "SuperSU" app, it has an unroot option.
My keeps boot looping
sergiox209 said:
My keeps boot looping
Click to expand...
Click to collapse
Did you factory reset from the Stock Recovery?
abaaaabbbb63 said:
Did you factory reset from the Stock Recovery?
Click to expand...
Click to collapse
not the stock one a Rom
sergiox209 said:
not the stock one a Rom
Click to expand...
Click to collapse
Wait, what exactly did you do?
abaaaabbbb63 said:
Wait, what exactly did you do?
Click to expand...
Click to collapse
honestly i forgot but it keeps telling me in CMW error mounting /data if i try to wipe data
sergiox209 said:
honestly i forgot but it keeps telling me in CMW error mounting /data if i try to wipe data
Click to expand...
Click to collapse
You flashed CWM without booting in the stock ROM?
Please, follow the guide accordingly.
Try keeping it stock for the first boot. Then, you may install a custom recovery.
abaaaabbbb63 said:
You flashed CWM without booting in the stock ROM?
Please, follow the guide accordingly.
Try keeping it stock for the first boot. Then, you may install a custom recovery.
Click to expand...
Click to collapse
yes thats what im trying to do but it keeps boot looping. if there a way i can fix?
sergiox209 said:
yes thats what im trying to do but it keeps boot looping. if there a way i can fix?
Click to expand...
Click to collapse
The bootloop is most probably caused by you not factory resetting. Do you have the stock recovery right now?
abaaaabbbb63 said:
The bootloop is most probably caused by you not factory resetting. Do you have the stock recovery right now?
Click to expand...
Click to collapse
the file that you provide i have that download.
sergiox209 said:
the file that you provide i have that download.
Click to expand...
Click to collapse
Ok, so you installed using the flash-all.bat? Then you have stock recovery.
In bootloader, select "Recovery". When the small Android comes up, press Power Button + Volume UP. From the menu, select "wipe data/factory reset"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this RECOVERY
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with volume up
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the tar.md5 recovery file
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume down + home + power as soon as it goes off restart it on recovery by keeping it up volume up + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Known issues
None.
Download
Recovery
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Stable
Created 2017-06-27
Last Updated 2017-11-29
Working fine so far. I flashed it with flashfire. Didn't have a computer near at the time. Up to now everything good. When i rebooted into recovery the first time i was asked if i wanted to install the official twrp app... So far recovery working fine flasged a few zip that worked later ill fo a backup and restour see if thats fine to
hi can you post valid download link
miki72mk said:
hi can you post valid download link
Click to expand...
Click to collapse
Link shows good for me, straight to zippyshare.
---------- Post added at 10:03 PM ---------- Previous post was at 10:02 PM ----------
http://www86.zippyshare.com/v/Yt25x1FJ/file.html is the direct link
Yes take you to straight to zippyshare is ok but how to download ,where ever klik there open spam pages more and more
miki72mk said:
Yes take you to straight to zippyshare is ok but how to download ,where ever klik there open spam pages more and more
Click to expand...
Click to collapse
Ah, click the big orange one to the right of the file information. It will open a spam link but also the download.
I try it but still just spam pages no download
miki72mk said:
I try it but still just spam pages no download
Click to expand...
Click to collapse
I uploaded it to my google drive for you https://drive.google.com/file/d/0Bz99NuhE3XwmcWJQdW9mN0hoTVk/view?usp=drivesdk
Thanks
faltisal said:
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with the Volume up button
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the file "sm-j320fn_twrp_recovery_3.1.1.tar.md5"
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume + home + power as soon as it goes off restart it on recovery by keeping it up Volume + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Know bugs
ADB don't work in recovery.
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
Sorry for my bad English, I learned English while watching movies and series in VO.
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Testing
Created 2017-06-27
Last Updated 2017-06-27
Click to expand...
Click to collapse
U go in to hidden menu to turn on adb mode forgot which one it is but u can use master short cut or Samsung info app to get into once rooted
when you plug to usb you can accesto your storage?
will this ork on J320F???
faltisal said:
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with the Volume up button
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the file "sm-j320fn_twrp_recovery_3.1.1.tar.md5"
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume + home + power as soon as it goes off restart it on recovery by keeping it up Volume + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Know bugs
ADB don't work in recovery.
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
Sorry for my bad English, I learned English while watching movies and series in VO.
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Testing
Created 2017-06-27
Last Updated 2017-06-27
Click to expand...
Click to collapse
Working for j320f
faltisal said:
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Click to expand...
Click to collapse
Will it work on SM-J320F
I have the same question, but I would try to flash this recovery on J320F. I'll give you results
EDIT: It's working, you can flash this TWRP on J320F, also i don't know Samsung removed warning infromation about phone modifications installed in phone, but in my case I have not seen any message on screen corner that my phone has been modified while turning in TWRP
Tomekpedal666 said:
I have the same question, but I would try to flash this recovery on J320F. I'll give you results
EDIT: It's working, you can flash this TWRP on J320F, also i don't know Samsung removed warning infromation about phone modifications installed in phone, but in my case I have not seen any message on screen corner that my phone has been modified while turning in TWRP
Click to expand...
Click to collapse
U still working on j320f version......Or when u flash rom to duel sim supported.....???
Yes, it works on J320F and J320F DUOS (Dual Sim).
NOTE:
LineageOS 13 & 14 / Marshmallow 6.0.1
If you experience lag in TWRP and touch display lag or touch display is not very responsive.
THIS IS KERNEL issue. updating the firmware will fix it.
Fix:
1. Flash stock rom 5.1.1 / use backup of 5.1.1 via twrp
2. dial *#2663#
3. Click TSP firmware update (general)
4. Wait until it says "pass"
5. Reboot to recovery and follow the steps to flash new rom.
Credits: @markus_ll
How do i root samsung j3 lollipop without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap
Cian909 said:
How do i root samsung j3 lollipop without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap
Click to expand...
Click to collapse
Which model of j3 do you have?
If flashing TWRP and SuperSU (or whatever super user manager you are using) didn't work then you've probably mistook some of the steps.
If you are following the instructions in the topic and it didn't worked, you should check oem unlock in your developer settings FIRST.
Go to settings, about, software information, then click on build number 5 times,
Your phone will show a message that developer options are enabled. (WARNING: i think that voids the warranty of your phone as soon as you enter in fast boot for flashing)
Then follow the steps at the beginning of the topic.
Also do not forget to install the proper version for your model.
Faltisal thanks for updating our device twrp mate! Will you let us know if you are planning to fix the adb in recovery mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS or T-Mobile splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
EDIT: So i messed up and apparently uploaded the 32bit TWRP by mistake and haven't built a bootable 64bit twrp in a while. I've been debugging building a 64bit TWRP based on an Oreo kernel.
I have uploaded RedWolf recovery which supports both 32bit and 64bit I'm sure of it this time. Sorry for the inconvenience and being a real d!^k to anyone who brought up having error 255 when flashing 64 bit builds in TWRP. This redwolf recovery will resolve such issues.
RESERVED
Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
The download link is set to private need permission to dl.
kalel420 said:
The download link is set to private need permission to dl.
Click to expand...
Click to collapse
It should be good to go now. I thought I had turned link sharing on. Apparently not.
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
quickslay15 said:
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
Click to expand...
Click to collapse
Do you have the lg drivers installed? It works for me on both Ubuntu and Windows 10
There is a 64bit TWRP available on the link in the OP. If your phone won't charge with 64bit TWRP, please stick with 32bit software until the issue is resolved. I have very little information on this, it happens on some TP260 and MP260 devices. Also Double tap to wake also doesn't work for some on 64 bit. There appear to have been multiple display models used in this device. It's not clear what other parts could be different and if that could be a factor. Hopefully we can resolve this issue soon. But I'm fairly clueless at this point. I tried updating my kernel to 10w and adding just dt2w and 64bit commits with no luck.
Looking to install a multiple rom manager..Spent hours going in circles. Tried Rom Manager but it doesn't seem to work right. Ideas?
64bit charging now works for all. Thank @messi2050 for the charging fix.
twrp
Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
Click to expand...
Click to collapse
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
Click to expand...
Click to collapse
Good to hear that you managed to get it working
Reflashed mp26010j in lgup, flashed twrp3.2.1.0 in fastboot. Nadroid restored mp26010v. Thanks @Travisholt92
Sent from my LG K20 Plus using XDA Labs
I'll have an updated twrp up within the next day with proper sdcard functionality.
system update
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?
The newly updated TWRP is now available for download on my google drive. (link is in the OP)
Also to avoid future confusion I have removed the 32bit specific TWRP from Google Drive. Next step will be Official status.
Deydacar3 said:
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?
Click to expand...
Click to collapse
Do not take official mp26010x, OEM unlock in Dev option is grayed out. Use the LG UP to flash kdz to mp26010j, then flash fastboot twrp3.2.1-0(64bit).
Profit!! ;]
Just ignore or disable ota notices.
Sent from my LG K20 Plus using XDA Labs
Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Sent from my LG K20 Plus using XDA Labs
thrasher194com said:
Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Click to expand...
Click to collapse
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Sent from my LG K20 Plus using XDA Labs
thrasher194com said:
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Click to expand...
Click to collapse
Lack of touch? I fixed it already and reuploaded
Travisholt92 said:
Lack of touch? I fixed it already and reuploaded
Click to expand...
Click to collapse
It seemed the twrp bootscreen had hiccups, and so did reboot system.
Sent from my LG K20 Plus using XDA Labs
Assalamu alaikum people,
Those on the telegram group know that I bugged you a lot about needing data partition. Because of my experience with unbricking and recovering the device, I can tell you a sureshot method that works to restore the device. Do not use this method if your device already works. There seems to be a lot of files inside the data partition which are necessary for the stock ROM to work. This method asks you to wipe data partition and so system update will not work. This should be a last resort. .
Many people seem to have come to the situation where they are in fastboot, and it says frp locked, so they cannot flash new twrp. And the system seems to be in bootloop and it does not work. What to do from there?
1. Download this file ->https://www.androidfilehost.com/?fid=673956719939832337.
2. In your SDCard, create a folder called TWRP and inside it, create a folder called BACKUPS (all in capitals). Inside this, create a folder called 7xtwrpbackup (small letters) and paste the contents of the zip that you have downloaded into this.
3. Boot to twrp in your device and go to restore. There you should see a folder 7xtwrpbackup. If you select it, you will get a checkbox below with recovery_ramdisk like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select Yes and after restore complete, go back and select reboot and reboot to recovery.
5. Now, the new twrp will boot. In the new twrp, I want you to first go to wipe -> advanced wipe -> select dalvik/art cache, cache, data, internal storage and system.
6. Come back once again and select wipe, and this time, select format data. It will ask you to type yes. After that is done, come back once again.
7. Now select install and in that, install the openkirin RR image from telegram group or here -> https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 (This step is optional because openkirin RR has a greater chance of booting than stock ROM. You can skip this step and directly boot stock)
8. Your system must boot now. If it boots, then all partitions are good. You can boot stock.
9. You can now can download stock from my post here and repeat from step 5-> https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569
If this does not work, then look at the second method in the next post
Second method
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.
Bricked my device Twrp doesn't work
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:
Oushal kDee said:
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:
Click to expand...
Click to collapse
Download vendor partition from here https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569
Hello i am siddharth, i have relocked my oem by fastboot oem relock -------- after that yes/no option came i click on yes. It starts factory formatting after completion of formatting when the phone starts its showing your device has failed verification and got stuck in it. When i press reboot option it will directly comes to erecovery mode wher the option came to download new recovery when i connect my phone with wifi it starts searching for some time after that system update failed.
When i starts mobile directly to fastboot mode by pressing volume down button and power button the white screen with android comes appear i.e fastboot mode screen. In that screen in green colour i found that
Phone Relock
FRP lock
When ever i m trying to find the device in fastboot mode by typing fastboot devices my device showing there but no other command is working such as fastboot oem unlock -------, fastboot flash system system.img, all the time it comes Failed.
I have downloaded many UPDATE.APP and tried to load that by dload method but every time after 5% it come Failed to install.
I have downloaded UPDATE.APP form ur given link also. This is only the image in which my phone comes upto 23% install after dat failed.
Nothing working for me. Kindly help me.
Mail me if there is any solution @
[email protected]
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
None of the method worked for me my device still bootloops no matter what system.img or rom zip file i flash. The emui recovery method didn't work for me as it loaded up to 5% and then failed instantly. Please help me unbrick my 9 lite bro. Could you provide me the boot.img? i think my phone got bricked because i tried to i install magisk on treble rom (i guess?). But anyway PLEASE HELP ME (
Try extracting kernel.img from an update and flash that. It fixed it for me.
hi twrp is bootlooping as well
cant access
---------- Post added at 07:15 PM ---------- Previous post was at 06:52 PM ----------
hey i used the twrp from the link made a backup restored it now a get bootloop cant get into twrp it goes in ti it then it fcs then am back to bootloader unlocked warning
hi anyone got custom.img and userdata.img from this LLDL31C432B130 800130 a need to restore my device
Same Problem
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem, if anyone has solution plz help.
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem.
mine goes to 5% doesnt do anything and then it fails
aveemashfaq said:
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.
Click to expand...
Click to collapse
But this is for L31
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
My phone's frp and bootloader locked,and phone is booting to erecovery,what to do
need help with LLD-AL10C675 indian version
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you
sunny_deed said:
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you
Click to expand...
Click to collapse
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.
BS4388 said:
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.
Click to expand...
Click to collapse
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released
sunny_deed said:
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released
Click to expand...
Click to collapse
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/
Sparkrite said:
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/
Click to expand...
Click to collapse
there is no Fullota version in there
sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
Go:
https://forum.xda-developers.com/9-lite/development/stock-rom-indian-firmware-c675-t3813875
sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
My bad, I was only trying to help.............
Anyway you have it now (post above) thanks to @BS4388 and @VigneshS007 .
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.
This is f*cking awesome. Thank you for your efforts. Will install asap and bring some feedback.
Is it working ? Any custom roms then ?
Please provide custom ROM the official ROM is no less than terrible and bad.
Finally compiled TWRP with decryption support, added in first post
hammad5507 said:
Please provide custom ROM the official ROM is no less than terrible and bad.
Click to expand...
Click to collapse
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.
descarao81 said:
I recommend the one made by Francko76.
Click to expand...
Click to collapse
Can you share a link to the Roms you mentioned ?
thanks
descarao81 said:
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.
Click to expand...
Click to collapse
benjieb said:
Can you share a link to the Roms you mentioned ?
thanks
Click to expand...
Click to collapse
what rom is Francko´s build? if you have a link, can you share it please?
Sorry to ask, is this vbmeta patched only for this device or can i installed in others device ?
Please share the links
Please share links for the Franko's build.
and also is there any custom pie rom available??
Pls share if any.. I am very unsatisfied with the global rom. Pls help.
@alexei sir, can you make custom kernel or give way to our devices gets exfat support ?
this is twrp for Lenovo Z6 (not pro) ?
geepnozeex said:
this is twrp for Lenovo Z6 (not pro) ?
Click to expand...
Click to collapse
No this is Twrp for Z6 Pro ( L78051 )
Very tempted to get this phone... has anyone try with phh’s GSI? Does under screen scanner works?
alexeei said:
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.
Click to expand...
Click to collapse
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks
threeeye said:
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks
Click to expand...
Click to collapse
NVM, just updated the adb tools and now everything is good
Restore stock bootloader?
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.
benjieb said:
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.
Click to expand...
Click to collapse
Here is the "The boot loader is unlocked..." screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's the boot loader:
kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Do you try flash qfil rom after lock bootloader?