{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS or T-Mobile splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
EDIT: So i messed up and apparently uploaded the 32bit TWRP by mistake and haven't built a bootable 64bit twrp in a while. I've been debugging building a 64bit TWRP based on an Oreo kernel.
I have uploaded RedWolf recovery which supports both 32bit and 64bit I'm sure of it this time. Sorry for the inconvenience and being a real d!^k to anyone who brought up having error 255 when flashing 64 bit builds in TWRP. This redwolf recovery will resolve such issues.
RESERVED
Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
The download link is set to private need permission to dl.
kalel420 said:
The download link is set to private need permission to dl.
Click to expand...
Click to collapse
It should be good to go now. I thought I had turned link sharing on. Apparently not.
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
quickslay15 said:
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
Click to expand...
Click to collapse
Do you have the lg drivers installed? It works for me on both Ubuntu and Windows 10
There is a 64bit TWRP available on the link in the OP. If your phone won't charge with 64bit TWRP, please stick with 32bit software until the issue is resolved. I have very little information on this, it happens on some TP260 and MP260 devices. Also Double tap to wake also doesn't work for some on 64 bit. There appear to have been multiple display models used in this device. It's not clear what other parts could be different and if that could be a factor. Hopefully we can resolve this issue soon. But I'm fairly clueless at this point. I tried updating my kernel to 10w and adding just dt2w and 64bit commits with no luck.
Looking to install a multiple rom manager..Spent hours going in circles. Tried Rom Manager but it doesn't seem to work right. Ideas?
64bit charging now works for all. Thank @messi2050 for the charging fix.
twrp
Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
Click to expand...
Click to collapse
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
Click to expand...
Click to collapse
Good to hear that you managed to get it working
Reflashed mp26010j in lgup, flashed twrp3.2.1.0 in fastboot. Nadroid restored mp26010v. Thanks @Travisholt92
Sent from my LG K20 Plus using XDA Labs
I'll have an updated twrp up within the next day with proper sdcard functionality.
system update
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?
The newly updated TWRP is now available for download on my google drive. (link is in the OP)
Also to avoid future confusion I have removed the 32bit specific TWRP from Google Drive. Next step will be Official status.
Deydacar3 said:
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?
Click to expand...
Click to collapse
Do not take official mp26010x, OEM unlock in Dev option is grayed out. Use the LG UP to flash kdz to mp26010j, then flash fastboot twrp3.2.1-0(64bit).
Profit!! ;]
Just ignore or disable ota notices.
Sent from my LG K20 Plus using XDA Labs
Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Sent from my LG K20 Plus using XDA Labs
thrasher194com said:
Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Click to expand...
Click to collapse
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Sent from my LG K20 Plus using XDA Labs
thrasher194com said:
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Click to expand...
Click to collapse
Lack of touch? I fixed it already and reuploaded
Travisholt92 said:
Lack of touch? I fixed it already and reuploaded
Click to expand...
Click to collapse
It seemed the twrp bootscreen had hiccups, and so did reboot system.
Sent from my LG K20 Plus using XDA Labs
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Me, Teamwin
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
im happy i got to test this out thanks for allowing me to
Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Thanks for testing and confirming that it works
MESSI!!
You are a straight savage!! Everything works perfectly! Come payday I will definitely be donating. Thank you for your hard work and quick response times!
Now hopefully custom ROM development will start soon maybe not from Messi because he doesn't have the phone but maybe some one will since we finally have root and recovery i mean seriously it's a nice phone
MP260?
messi2050 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MS260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from So Please Consider donating using the link below if you appreciate my work
https://www.paypal.me/messi2050
Click to expand...
Click to collapse
Any way to get this working on the MP260 version??
@LandonCaviness
Yes it should work with both t mobile and metro variants
messi2050 said:
@LandonCaviness
Yes it should work with both t mobile and metro variants
Click to expand...
Click to collapse
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.
LandonCaviness said:
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.
Click to expand...
Click to collapse
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.
messi2050 said:
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.
Click to expand...
Click to collapse
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.
LandonCaviness said:
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.
Click to expand...
Click to collapse
You contact me at hangouts for a faster guiding.
Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Nathan which variant you have the tp260 or the mp260 variant ?
anyone tested it on mp260 yet ?
Landon, it's almost like youre pumping the brake with power button. Hold volume down on reboot, when you see LG, do a click down on fingerprint button, let go, then hold depressed...boom.twrp.
---------- Post added at 09:06 AM ---------- Previous post was at 09:00 AM ----------
It happens within 5-7 seconds. Took me a couple tries but its $ after that.
messi2050 said:
Nathan which variant you have the tp260 or the mp260 variant ?
Click to expand...
Click to collapse
I have the mp260
Here are screenshots shots
can someone send the stock boot.img? thnks
Nathan4923 said:
I have the mp260
Click to expand...
Click to collapse
Nathan4923 said:
Here are screenshots shots
Click to expand...
Click to collapse
@LandonCaviness
Seems there is something wrong with your mp260.
bizichild said:
can someone send the stock boot.img? thnks
Click to expand...
Click to collapse
For which variant ?
This is the tp260 one
https://forum.xda-developers.com/lg-k10/help/lg-k20-plus-help-root-t3587193/post72525397
messi2050 said:
@LandonCaviness
Seems there is something wrong with your mp260.
Click to expand...
Click to collapse
That certainly appears to be the case. I don't really know what to do from here. Maybe flashing back to stock and repeating the process?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this RECOVERY
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with volume up
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the tar.md5 recovery file
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume down + home + power as soon as it goes off restart it on recovery by keeping it up volume up + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Known issues
None.
Download
Recovery
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Stable
Created 2017-06-27
Last Updated 2017-11-29
Working fine so far. I flashed it with flashfire. Didn't have a computer near at the time. Up to now everything good. When i rebooted into recovery the first time i was asked if i wanted to install the official twrp app... So far recovery working fine flasged a few zip that worked later ill fo a backup and restour see if thats fine to
hi can you post valid download link
miki72mk said:
hi can you post valid download link
Click to expand...
Click to collapse
Link shows good for me, straight to zippyshare.
---------- Post added at 10:03 PM ---------- Previous post was at 10:02 PM ----------
http://www86.zippyshare.com/v/Yt25x1FJ/file.html is the direct link
Yes take you to straight to zippyshare is ok but how to download ,where ever klik there open spam pages more and more
miki72mk said:
Yes take you to straight to zippyshare is ok but how to download ,where ever klik there open spam pages more and more
Click to expand...
Click to collapse
Ah, click the big orange one to the right of the file information. It will open a spam link but also the download.
I try it but still just spam pages no download
miki72mk said:
I try it but still just spam pages no download
Click to expand...
Click to collapse
I uploaded it to my google drive for you https://drive.google.com/file/d/0Bz99NuhE3XwmcWJQdW9mN0hoTVk/view?usp=drivesdk
Thanks
faltisal said:
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with the Volume up button
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the file "sm-j320fn_twrp_recovery_3.1.1.tar.md5"
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume + home + power as soon as it goes off restart it on recovery by keeping it up Volume + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Know bugs
ADB don't work in recovery.
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
Sorry for my bad English, I learned English while watching movies and series in VO.
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Testing
Created 2017-06-27
Last Updated 2017-06-27
Click to expand...
Click to collapse
U go in to hidden menu to turn on adb mode forgot which one it is but u can use master short cut or Samsung info app to get into once rooted
when you plug to usb you can accesto your storage?
will this ork on J320F???
faltisal said:
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Installation instructions
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with the Volume up button
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the file "sm-j320fn_twrp_recovery_3.1.1.tar.md5"
Click on options and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume + home + power as soon as it goes off restart it on recovery by keeping it up Volume + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encouter "BLOCKED BY FRP LOCK" on boot.
Know bugs
ADB don't work in recovery.
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Sources
Device Tree
Thanks To/Credits
@djeman (for device tree)
Sorry for my bad English, I learned English while watching movies and series in VO.
XDA:DevDB Information
[RECOVERY] TWRP 3.1.1-0 for Samsung Galaxy J3 (2016) [SM-J320FN] [UNOFFICIAL], Tool/Utility for the Samsung Galaxy J3 (2016)
Contributors
faltisal, djeman
Version Information
Status: Testing
Created 2017-06-27
Last Updated 2017-06-27
Click to expand...
Click to collapse
Working for j320f
faltisal said:
Download
sm-j320fn_twrp_recovery_3.1.1.tar.md5
Click to expand...
Click to collapse
Will it work on SM-J320F
I have the same question, but I would try to flash this recovery on J320F. I'll give you results
EDIT: It's working, you can flash this TWRP on J320F, also i don't know Samsung removed warning infromation about phone modifications installed in phone, but in my case I have not seen any message on screen corner that my phone has been modified while turning in TWRP
Tomekpedal666 said:
I have the same question, but I would try to flash this recovery on J320F. I'll give you results
EDIT: It's working, you can flash this TWRP on J320F, also i don't know Samsung removed warning infromation about phone modifications installed in phone, but in my case I have not seen any message on screen corner that my phone has been modified while turning in TWRP
Click to expand...
Click to collapse
U still working on j320f version......Or when u flash rom to duel sim supported.....???
Yes, it works on J320F and J320F DUOS (Dual Sim).
NOTE:
LineageOS 13 & 14 / Marshmallow 6.0.1
If you experience lag in TWRP and touch display lag or touch display is not very responsive.
THIS IS KERNEL issue. updating the firmware will fix it.
Fix:
1. Flash stock rom 5.1.1 / use backup of 5.1.1 via twrp
2. dial *#2663#
3. Click TSP firmware update (general)
4. Wait until it says "pass"
5. Reboot to recovery and follow the steps to flash new rom.
Credits: @markus_ll
How do i root samsung j3 lollipop without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap
Cian909 said:
How do i root samsung j3 lollipop without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap
Click to expand...
Click to collapse
Which model of j3 do you have?
If flashing TWRP and SuperSU (or whatever super user manager you are using) didn't work then you've probably mistook some of the steps.
If you are following the instructions in the topic and it didn't worked, you should check oem unlock in your developer settings FIRST.
Go to settings, about, software information, then click on build number 5 times,
Your phone will show a message that developer options are enabled. (WARNING: i think that voids the warranty of your phone as soon as you enter in fast boot for flashing)
Then follow the steps at the beginning of the topic.
Also do not forget to install the proper version for your model.
Faltisal thanks for updating our device twrp mate! Will you let us know if you are planning to fix the adb in recovery mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: Decrypting data is not currently supported. MTP also does not work, but you can use adb to push and pull files.
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
/*
* [B]Your warranty is now void.[/B]
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Sources: https://github.com/TeamWin
Device tree: https://github.com/TeamWin/android_device_huawei_charlotte
Download
Flashing:
Code:
fastboot flash recovery_ramdisk twrp-3.2.1-0-charlotte.img
Special thanks to @Dees_Troy for the Huawei Blanc device tree, which this is based on.
Thank you so much Is there any chance of you uploading a twrp flashable image of the newest p20 pro update?
Will try this when I get home. It doesn't replace eRecovery, right? So I can still recover if anything goes wrong? Also, best way to boot into TWRP once flashed?
danifilth4king said:
Will try this when I get home. It doesn't replace eRecovery, right? So I can still recover if anything goes wrong? Also, best way to boot into TWRP once flashed?
Click to expand...
Click to collapse
As long as you flash the image to recovery_ramdisk it does not replace eRecovery, no. I actually used eRecovery to restore while testing my build.
Once flashed you can boot into TWRP via "adb reboot recovery" out of a running system with enabled ADB or via pressing VolUp+Power on a powered off device.
Many thanks a1Pha, just installed on a CLT-L29 8.1.0.106(C432), works flawless. Great job !
Once flashed you can boot into TWRP via "adb reboot recovery" out of a running system with enabled ADB or via pressing VolUp+Power on a powered off device.[/QUOTE]
You can also reboot to recovery if your phone is up and running opening Magisk Manager -> Modules, three points on the upper right corner will give you the choice recovery, bootloader or download...
Cheers.
buenso80 said:
Thank you so much Is there any chance of you uploading a twrp flashable image of the newest p20 pro update?
Click to expand...
Click to collapse
To be honest: This is my first Huawei and I am still figuring out how they manage their region-specific customization. Also it seems not so easy to get the UPDATE.APP for current builds. So no promises here - but I'll try to figure out and create a new thread if I'm able to build something.
Thanks given! I'll try this when I get a chance! This is a good start for this new device
a1Pha said:
To be honest: This is my first Huawei and I am still figuring out how they manage their region-specific customization. Also it seems not so easy to get the UPDATE.APP for current builds. So no promises here - but I'll try to figure out and create a new thread if I'm able to build something.
Click to expand...
Click to collapse
Maybe this could be usefull?
https://forum.xda-developers.com/hu...rmware-release-clt-l29-8-1-0-107c432-t3779167
buenso80 said:
Maybe this could be usefull?
https://forum.xda-developers.com/hu...rmware-release-clt-l29-8-1-0-107c432-t3779167
Click to expand...
Click to collapse
Thanks. As soon as I've got a fully working system.img which doesn't break different country models you'll hear from me.
Does it work for the CLT-L09 as well?
llvllorpheus said:
Does it work for the CLT-L09 as well?
Click to expand...
Click to collapse
Yes, I'm actually on CLT-L09!
llvllorpheus said:
Does it work for the CLT-L09 as well?
Click to expand...
Click to collapse
Works perfect
a1Pha said:
As long as you flash the image to recovery_ramdisk it does not replace eRecovery, no. I actually used eRecovery to restore while testing my build.
Once flashed you can boot into TWRP via "adb reboot recovery" out of a running system with enabled ADB or via pressing VolUp+Power on a powered off device.
Click to expand...
Click to collapse
How do you get back into eRecovery once you have flashed twrp?
Volume up gets you to twrp - is there a special key combo/sequence to get to eRecovery? I as as I have access to funkyhuawei. Also - how would one go back to stock with this installed? Sorry first time doing this for years
Cheers
Andy
---------- Post added at 06:52 PM ---------- Previous post was at 06:30 PM ----------
Ok so I managed to get into eRecovery by powering off and holding vol up and pwr until the phone vibrated, then release power and continued holding vol up until eRecovery appeared. If I wanted to completely remove TWRP and root etc once in eRecovery would it simply be a case of clicking download latest version and recovery? Then once recovered I could relock the bootloader? Or are there some other steps to do?
If anyone could help so I know for future reference that would be amazing. Thank you in advance
andrewglass3 said:
How do you get back into eRecovery once you have flashed twrp?
Another way to enter eRecovery: Shut down phone, press VOL+ and connect to USB... and wait
Click to expand...
Click to collapse
andrewglass3 said:
If I wanted to completely remove TWRP and root etc once in eRecovery would it simply be a case of clicking download latest version and recovery? Then once recovered I could relock the bootloader? Or are there some other steps to do?
If anyone could help so I know for future reference that would be amazing. Thank you in advance
Click to expand...
Click to collapse
Glad you made it
I used eRecovery after I bricked my recovery partition and ended up with a working stock recovery, so yes, that should be the way. I did not try to relock the bootloader though.
Official builds from twrp.me are now available, OP updated.
a1Pha said:
Official builds from twrp.me are now available, OP updated.
Click to expand...
Click to collapse
i see pretorians TWRP has MTP working fine
but the official TWRP has not
if we decide to flash pretorians twrp and then yours, is that fine? or do we have to flash stock in-between?
virtyx said:
i see pretorians TWRP has MTP working fine
but the official TWRP has not
if we decide to flash pretorians twrp and then yours, is that fine? or do we have to flash stock in-between?
Click to expand...
Click to collapse
You should be fine switching between the builds as long as you don't touch other partitions.
a1Pha said:
You should be fine switching between the builds as long as you don't touch other partitions.
Click to expand...
Click to collapse
ty!
hopefully official can get MTP working fine fingers crossed.
Good day.
Can this use for rebrand from OCT652 to C636?
Thanks.
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.
This is f*cking awesome. Thank you for your efforts. Will install asap and bring some feedback.
Is it working ? Any custom roms then ?
Please provide custom ROM the official ROM is no less than terrible and bad.
Finally compiled TWRP with decryption support, added in first post
hammad5507 said:
Please provide custom ROM the official ROM is no less than terrible and bad.
Click to expand...
Click to collapse
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.
descarao81 said:
I recommend the one made by Francko76.
Click to expand...
Click to collapse
Can you share a link to the Roms you mentioned ?
thanks
descarao81 said:
There are some "globalised" china roms which are doing a decent job (with notifications sound fixed, chinese bloatware removed and google services installed), I recommend the one made by Francko76.
Also you can try all the treble stuff out there. I only tried two GSIs so far and I went back to Francko´s build.
Anyway I´m like you looking forward z6 pro dedicated custom roms.
Click to expand...
Click to collapse
benjieb said:
Can you share a link to the Roms you mentioned ?
thanks
Click to expand...
Click to collapse
what rom is Francko´s build? if you have a link, can you share it please?
Sorry to ask, is this vbmeta patched only for this device or can i installed in others device ?
Please share the links
Please share links for the Franko's build.
and also is there any custom pie rom available??
Pls share if any.. I am very unsatisfied with the global rom. Pls help.
@alexei sir, can you make custom kernel or give way to our devices gets exfat support ?
this is twrp for Lenovo Z6 (not pro) ?
geepnozeex said:
this is twrp for Lenovo Z6 (not pro) ?
Click to expand...
Click to collapse
No this is Twrp for Z6 Pro ( L78051 )
Very tempted to get this phone... has anyone try with phh’s GSI? Does under screen scanner works?
alexeei said:
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
INSTALLATION:
Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here
Pre-Requisite 3
Your device needs this with unlocked bootloader
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
And now, how to install:
1.Reboot phone to Fastboot mode (via adb -type adb reboot bootloader)
2.Download patched vbmeta and TWRP recovery
3.Extract it to folder with minimal adb and fastboot
4.Open cmd in this folder and type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5.Then type fastboot reboot bootloader
6.Type fastboot flash recovery twrp_3.3.1_decrypt_works_by_alexeei.img
7.Press volume - and select Reboot recovery, then press power button
8.Enjoy
What worked:
All functions (may be if not, please say). Also TWRP now see exFAT microsd.
Thanks wzsx150 for it's TWRP for Lenovo Z5 Pro GT, some decrypt stuff taken from it.
Click to expand...
Click to collapse
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks
threeeye said:
At step 4 I'm getting "fastboot: unknown option -- disable-verity"
Any idea?
Thanks
Click to expand...
Click to collapse
NVM, just updated the adb tools and now everything is good
Restore stock bootloader?
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.
benjieb said:
Share screenshot, I think this normal boot step when BL is unlocked on lenovo / Zuk phones.
Click to expand...
Click to collapse
Here is the "The boot loader is unlocked..." screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here's the boot loader:
kagoromo said:
Hello, I recently went through the whole process of unlocking bootloader, installing TWRP recovery and flashing ROM, and I am at version 11.0.350 ST ROW currently.
The ROM works fine, but now at every boot I am greeted by the "The boot loader is unlocked and software integrity cannot be guaranteed. <snip> Press power button to pause boot/continue" notice.
According to google, it's apparently a result of the bootloader unlocking process.
I tried to lock the bootloader again using "fastboot flashing lock", but then the phone stopped booting normally. It got stuck at the boot logo (which I believe means bricked?).
It wouldn't work until I unlocked bootloader and reflash the ROM.
So what I want to ask is, is it possible at this time to restore the bootloader to stock to avoid that "boot loader unlocked" notice and possibly become eligible for warranty again?
Click to expand...
Click to collapse
Do you try flash qfil rom after lock bootloader?
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the LineageOS 18.1 for LG G8s ThinQ
Click to expand...
Click to collapse
Installation instructions
1. Install Q Stock Rom onto your phone , follow some tutorial you can find in this forum
2. Flash boot.img and dtbo.img by typing fastboot flash boot boot.img and fastboot flash dtbo_a dtbo.img and fastboot flash dtbo_b dtbo.img
3. Wipe your userdata by typing fastboot erase userdata
4. Reboot the phone and immeditly do the recovery key combination
5. In Lineageos recovery select install and then sideload from adb
6. On your computer type adb sideload pathtotheromzip and press enter
7. The rom should now be flashed , flash gapps and other mods like magisk the same way
Click to expand...
Click to collapse
Download
ROM
RECOVERY
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:16.01.2021
[note] 1st Release of Lineage 18.1
[new] Android 11 R
[changed]
[fixed] Rom boots into OS
Older changelogs:
Click to expand...
Click to collapse
FAQ
What doesnt work ?
You tell me
This is only for G8s not for G8 also not for G8X
VOLTE DONT WORK AND IT WONT EVER WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
Sources
Code:
[URL="https://github.com/J0SH1X/android_kernel_lge_sm8150]Kernel[/URL]
[URL="https://github.com/J0SH1X/android_device_lge_sm8150-common"]Common[/URL]
[URL="https://github.com/J0SH1X/android_device_lge_betalm"]Device[/URL]
[URL="https://github.com/J0SH1X/android_device_lge_beta-common"]Device-Common[/URL]
Great work. Do you plan to do official LineageOs version?
Any chance for g8?
We wait for the next releases, finally something new. Already installed but hopefully soon a fix for the headphone jack
Great Work!!
Hello! Excuse me, is there a chance to install TWRP on the LG G8s?
thanks for your work that exactly what im looking for
lg makes some good hardware but the worst software support, im corrently waiting for january security patch but not yet
i want to ask if you will keep supporting LG G8S ?
OzAcid22 said:
We wait for the next releases, finally something new. Already installed but hopefully soon a fix for the headphone jack
Click to expand...
Click to collapse
Hello, did you test the variant of the 19 or 23?
Any1 that tried it can tell pros and cons vs LG stock Android 10 rom ?.
I'd like to try it but that means loosing DTS: X codec, equalizer or whatever it is that makes sound much better, and as long as I know Android 11 is worse than 10 for gaming, isn't it?
Does this rom has newer & better drivers for Adreno GPU?
BlackSunCL said:
Hello, did you test the variant of the 19 or 23?
Click to expand...
Click to collapse
19 but in 23 it has not been fixed yet I think, just read the change log of 23
Eduxki said:
Any1 that tried it can tell pros and cons vs LG stock Android 10 rom ?.
I'd like to try it but that means loosing DTS: X codec, equalizer or whatever it is that makes sound much better, and as long as I know Android 11 is worse than 10 for gaming, isn't it?
Does this rom has newer & better drivers for Adreno GPU?
Click to expand...
Click to collapse
I change everything a bit, the rom is obviously more stock and faster, especially if you use the gestures for navigation, it is true you lose the audio features, On the gaming side, I think it doesn't change much and I think it has the same drivers as the stock rom. The sure thing is that if you love android "stock" it is much better, unfortunately it is still very unripe for certain aesthetic things(For example the "notification panel" top bar turns out to be lower than the height of the notch, but you can fix it through some mods and magisk) but maybe soon it will be fixed.
I need help, I flash both the boot.img and the dtbo.img like said in the instructions and when I try to reboot into said Lineageos recovery it never works and I tried ever feasible key combination and it never goes into a lineageos recovery to continue the flashing, Any help or feed back would be appreciated.
sockopucko said:
I need help, I flash both the boot.img and the dtbo.img like said in the instructions and when I try to reboot into said Lineageos recovery it never works and I tried ever feasible key combination and it never goes into a lineageos recovery to continue the flashing, Any help or feed back would be appreciated.
Click to expand...
Click to collapse
I would recommend a flash of the stock system and then repeat the steps, if the volume keys and the Power on / off work you should go to the lineage recovery. Have you checked if there is any error during the terminal flash? Or check the files by re-downloading them, let me know if it works, to enter recovery mode you have to keep the volume key down and the power key, at the first writing you have to leave the power key and then press it again
OzAcid22 said:
I would recommend a flash of the stock system and then repeat the steps, if the volume keys and the Power on / off work you should go to the lineage recovery. Have you checked if there is any error during the terminal flash? Or check the files by re-downloading them, let me know if it works, to enter recovery mode you have to keep the volume key down and the power key, at the first writing you have to leave the power key and then press it again
Click to expand...
Click to collapse
Ok well I managed to get the recovery working by tapping the volume down key while the lg logo was up but now every time I try to adb sideload the Lineageos file it get's stuck at 47% on computer and then spits out an error saying failed to read command no error I've tried a number of "fixes" to no avail.
sockopucko said:
Ok well I managed to get the recovery working by tapping the volume down key while the lg logo was up but now every time I try to adb sideload the Lineageos file it get's stuck at 47% on computer and then spits out an error saying failed to read command no error I've tried a number of "fixes" to no avail.
Click to expand...
Click to collapse
I initially had the same problem apparently maybe you have multiple versions of adb installed, try to delete and uninstall everything and then install only one, check that the zip file is not damaged by simply opening it from the PC, if it gives you an error that will be the problem , if you had to try several times to transport the file through adb sidelaod just go to advanced and restart the recovery and then try the step again
OzAcid22 said:
I initially had the same problem apparently maybe you have multiple versions of adb installed, try to delete and uninstall everything and then install only one, check that the zip file is not damaged by simply opening it from the PC, if it gives you an error that will be the problem , if you had to try several times to transport the file through adb sidelaod just go to advanced and restart the recovery and then try the step again
Click to expand...
Click to collapse
I've uninstalled and reinstalled adb drivers on my computer but I'm still getting the same problem I think I'll just wait until there's a twrp recovery for the device being that it makes processes like this a whole lot easy, Thank you for the help anyway I appreciate it.
You can only install 19 the others don't work .. even if you install 19 and try to update to the latest version after the update it doesn't work anymore.
sockopucko said:
Ok well I managed to get the recovery working by tapping the volume down key while the lg logo was up but now every time I try to adb sideload the Lineageos file it get's stuck at 47% on computer and then spits out an error saying failed to read command no error I've tried a number of "fixes" to no avail.
Click to expand...
Click to collapse
Its normal for it to get "stuck" at 47%, because at that point its sideloaded to device already and should already be showing its installing on the device, it does give a wierd error but installs anyway, allow it to install and make sure you erased userdata in fastboot before trying to flash
Btw - you can install from ext SD as well not just sideload
If all fails, restore with LGup and make sure you first boot into lg rom and pass setup and FRP, device gives a wierd formatting bootloop if you dont.
Boot into fastboot
Erase userdata
Flash boot and dtbo
Boot into los recovery
Sideload /install zip from SD
After installing step 2 passes, reboot, give it a minute, rom should be booted
HI guys! i have any hard problem, i've delete all partition with "QFIL" and i've not files backup.qcn or rawprogram.xml or patch.Please if is possible load here your files for help me- ty much guys
Qualcuno può aiutarmi?