Database Develop

[Recovery][ROOT] Twrp v3 For LG K20 PLUS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Me, Teamwin
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

im happy i got to test this out thanks for allowing me to

Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Thanks for testing and confirming that it works

MESSI!!
You are a straight savage!! Everything works perfectly! Come payday I will definitely be donating. Thank you for your hard work and quick response times!

Now hopefully custom ROM development will start soon maybe not from Messi because he doesn't have the phone but maybe some one will since we finally have root and recovery i mean seriously it's a nice phone

MP260?
messi2050 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MS260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://www.mediafire.com/download/pednda2ck3mbha8
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from So Please Consider donating using the link below if you appreciate my work
https://www.paypal.me/messi2050
Click to expand...
Click to collapse
Any way to get this working on the MP260 version??

@LandonCaviness
Yes it should work with both t mobile and metro variants

messi2050 said:
@LandonCaviness
Yes it should work with both t mobile and metro variants
Click to expand...
Click to collapse
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.

LandonCaviness said:
I tried it, but after flashing the recovery, i can't get it to boot into TWRP. The bootloader is unlocked.
After holding the volume down and power keys and selecting to factory reset, it says "Your device software cannot be checked for corruption. Lock the bootloader. PRESS THE POWER KEY TO CONTINUE. Your device will boot up automatically after a while."
After this, it begins to bootloop back and forth between the Metro boot logo and the previous message screen.
Click to expand...
Click to collapse
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.

messi2050 said:
You need to follow the instructions step by step and boot directly into twrp after flashing or the system will replace it with stock recovery.
Click to expand...
Click to collapse
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.

LandonCaviness said:
I believe that I'm following the directions word for word. I've tried several times. Can only get it to bootloop after the factory reset menu.
Click to expand...
Click to collapse
You contact me at hangouts for a faster guiding.

Nathan4923 said:
im happy i got to test this out thanks for allowing me to
Click to expand...
Click to collapse
Nathan which variant you have the tp260 or the mp260 variant ?

anyone tested it on mp260 yet ?

Landon, it's almost like youre pumping the brake with power button. Hold volume down on reboot, when you see LG, do a click down on fingerprint button, let go, then hold depressed...boom.twrp.
---------- Post added at 09:06 AM ---------- Previous post was at 09:00 AM ----------
It happens within 5-7 seconds. Took me a couple tries but its $ after that.

messi2050 said:
Nathan which variant you have the tp260 or the mp260 variant ?
Click to expand...
Click to collapse
I have the mp260

Here are screenshots shots

can someone send the stock boot.img? thnks

Nathan4923 said:
I have the mp260
Click to expand...
Click to collapse
Nathan4923 said:
Here are screenshots shots
Click to expand...
Click to collapse
@LandonCaviness
Seems there is something wrong with your mp260.

bizichild said:
can someone send the stock boot.img? thnks
Click to expand...
Click to collapse
For which variant ?
This is the tp260 one
https://forum.xda-developers.com/lg-k10/help/lg-k20-plus-help-root-t3587193/post72525397

messi2050 said:
@LandonCaviness
Seems there is something wrong with your mp260.
Click to expand...
Click to collapse
That certainly appears to be the case. I don't really know what to do from here. Maybe flashing back to stock and repeating the process?

[RECOVERY] TWRP for LG G6 H870 (unofficial)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CONGRATS TO @davidporter1010 ON THE FIRST EVER ROOTED LG G6!!!
Video review by @davidporter1010 https://www.youtube.com/watch?app=desktop&persist_app=1&noapp=1&v=alH4YEiV5bc
A message to those with other variants of the G6:
The H870 International variant is the only one with an official bootloader unlock from LG.
Should there be a time where your flashing mechanisms get cracked, simply mention my name on this thread or via private message and I would be happy to create a thread with TWRP for your device.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
BUILD 4
Do the captcha and then wait 3 seconds before pressing the get link button, close any ads or poups
You can donate here to help me buy an H870 and that way I can further contribute towards development:
paypal.me/VoRt3xElarixx
You can find the recovery here:
https://drive.google.com/file/d/0B7S6ou836i7AVjhjNlpqQTdoSlk/view
FULL STEPS FOR OBTAINING ROOT
Follow LG's bootloader unlocking instructions here before you begin!
1. Download the latest TWRP .img for your device from this thread
2. Use the same fastboot tool you downloaded in the LG unlock instructions to flash TWRP using the command:
Code:
fastboot flash recovery twrp-x.x.x-x-h870.img
* Replace x.x.x-x with the actual version you are flashing!
3. Enter "fastboot reboot recovery" into the fastboot tool
4. Swipe to allow modifications, then hit wipe and tap format data, type "yes" and press enter
3. Install SuperSU, or Magisk to gain root and make system bootable, or just flash
no DMvertity opt file to make system bootable without root
8. Go to [Reboot] -> [System].
Wait 2-5 minutes for your device to finish setting itself up.
Github:
https://github.com/Nima0003/TWRP-H870
CREDITS:
@jcadduono for the template of this thread @jimbomodder for helping me pull the stock recovery @Rashed97 for the early TWRP test build he did from source

1st

So...we are on the way to have a fully functional recovery??
i see all has stopped...lineage..twrp...
Hurry up....we need to flashhhhhh
ahahaa
thanks for all....

Nice hows this build to your last one have you submited it to twrp for official status ?

can't get this one to work, I have an italian h870 i guess it's an international version
unlocked via LG developer
downloaded platform tools from android studio
flashed twrp-3.1.1-0-h870.img, done this multiple times
fastboot flash recovery twrp-3.1.1-0-h870.img
target reported max download size of 536870912 bytes
sending 'recovery' (22824 KB)...
OKAY [ 0.505s]
writing 'recovery'...
OKAY [ 0.240s]
finished. total time: 0.746s
Click to expand...
Click to collapse
in this version of platfor tools i don't have the command to reboot into recovery so i reboot into system and then adb reboot recovery
done this the phone shows the broken android image and then reboots into system after few seconds
any help about it?
thanks

You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?

kimitza said:
You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?
Click to expand...
Click to collapse
Old thread was closed because the links I used to keep statistics were also pay per click links, and no it's not a rip-off, it's a port.

strikerdj2011 said:
Nice hows this build to your last one have you submited it to twrp for official status ?
Click to expand...
Click to collapse
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.

piggarello said:
So...we are on the way to have a fully functional recovery??
i see all has stopped...lineage..twrp...
Hurry up....we need to flashhhhhh
ahahaa
thanks for all....
Click to expand...
Click to collapse
Nothing has stopped, I was very busy, and XDA locked my threads, also my PC wireless chip broke so I need a new one which I can't afford.

Cmon Devs..!!

piggarello said:
Cmon Devs..!!
Click to expand...
Click to collapse
Development hasn't stopped

Good new!

nima0003 said:
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.
Click to expand...
Click to collapse
https://help.github.com/articles/adding-an-existing-project-to-github-using-the-command-line/

kimitza said:
You're doing it wrong.
In order for TWRP to stick, you need to do this :
1. Flash the image like you did.
2. Don't reboob. Press vol down+power at the same time until the phone restarts. Keep pressing those buttons andWait for the lg logo to appear, then release power button.This way the menu for hard reset will appear. Confirm and voila, you will enter in TWRP.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
@nima0003 ,could you tell us why the old thread was closed?
I saw in recovery it shows H872, not H870. This means it's a rip off?
Click to expand...
Click to collapse
Done this, the LG logo appears before and after the unlock warning but i can't enter reset mode in this way
It's volume down button not up? should i release and then repush the power button?
it seems that android bootlock warning screen interferes with the process

scarliga said:
Done this, the LG logo appears before and after the unlock warning but i can't enter reset mode in this way
It's volume down button not up? should i release and then repush the power button?
it seems that android bootlock warning screen interferes with the process
Click to expand...
Click to collapse
Once you flashed twrp in fastboot, disconnect from pc, the hold vol down+ power, keep holding until you see LG logo and then quickly let go of power button and re-press. It will then show stock recovery, follow instructions to do factory reset and it will boot twrp after showing LG logo again

Done, thank you
now got this error while wiping data
EDIT: something gone wrong with encryption, it wiped me data and removed recovery
When connected via USB in TWRP it shows as an H872 but it's an H870
I've flashed the open eu kdz with uppercut, is it related to it?
any guess about it?

nima0003 said:
Yes but I need help uploading sources to github as I am not fimaliar with git, if anyone knows how and can help me, we will have official builds.
Click to expand...
Click to collapse
If you are not familiar with git, vive gitkraken a try.
Also you can join twrp IRC Channel, they will give all the support you need.

Will there be any root options for the dual SIM version?

unknownblkman said:
Will there be any root options for the dual SIM version?
Click to expand...
Click to collapse
No.
Enviado desde mi LG-H870 mediante Tapatalk

reformatted in download mode with uppercut
I still don't understand why twrp detects my phone as an H872.
I can't flash lineageos because it fail the initial hardware check, also I guess twrp is not fully functional as I wasn't able to flash LG-H87010f-Flashable.COMPLETE.zip in the usual way

[Recovery[[Root][32/64-bit] TWRP 3.2.1-0 For LG K20 Plus (TP260 & MP260)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS or T-Mobile splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
EDIT: So i messed up and apparently uploaded the 32bit TWRP by mistake and haven't built a bootable 64bit twrp in a while. I've been debugging building a 64bit TWRP based on an Oreo kernel.
I have uploaded RedWolf recovery which supports both 32bit and 64bit I'm sure of it this time. Sorry for the inconvenience and being a real d!^k to anyone who brought up having error 255 when flashing 64 bit builds in TWRP. This redwolf recovery will resolve such issues.

RESERVED

Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
The download link is set to private need permission to dl.

kalel420 said:
The download link is set to private need permission to dl.
Click to expand...
Click to collapse
It should be good to go now. I thought I had turned link sharing on. Apparently not.

I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does

quickslay15 said:
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
Click to expand...
Click to collapse
Do you have the lg drivers installed? It works for me on both Ubuntu and Windows 10

There is a 64bit TWRP available on the link in the OP. If your phone won't charge with 64bit TWRP, please stick with 32bit software until the issue is resolved. I have very little information on this, it happens on some TP260 and MP260 devices. Also Double tap to wake also doesn't work for some on 64 bit. There appear to have been multiple display models used in this device. It's not clear what other parts could be different and if that could be a factor. Hopefully we can resolve this issue soon. But I'm fairly clueless at this point. I tried updating my kernel to 10w and adding just dt2w and 64bit commits with no luck.

Looking to install a multiple rom manager..Spent hours going in circles. Tried Rom Manager but it doesn't seem to work right. Ideas?

64bit charging now works for all. Thank @messi2050 for the charging fix.

twrp
Travisholt92 said:
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP260 & MP260
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
Downloads :
https://drive.google.com/file/d/10GyoHq05dPhPdnwqEBY9i9ou7KEpwmMH/view?usp=drivesdk
[Please do not mirror the downloads]
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits: Myself, Messi2050, and Teamwin
If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.
A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
Click to expand...
Click to collapse
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
Click to expand...
Click to collapse
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!

Deydacar3 said:
Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.
---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------
I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
Click to expand...
Click to collapse
Good to hear that you managed to get it working

Reflashed mp26010j in lgup, flashed twrp3.2.1.0 in fastboot. Nadroid restored mp26010v. Thanks @Travisholt92
Sent from my LG K20 Plus using XDA Labs

I'll have an updated twrp up within the next day with proper sdcard functionality.

system update
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?

The newly updated TWRP is now available for download on my google drive. (link is in the OP)
Also to avoid future confusion I have removed the 32bit specific TWRP from Google Drive. Next step will be Official status.

Deydacar3 said:
Hi, guys. I have a system update, can I update it with twrp? if not, how do i remove the update notification?
Click to expand...
Click to collapse
Do not take official mp26010x, OEM unlock in Dev option is grayed out. Use the LG UP to flash kdz to mp26010j, then flash fastboot twrp3.2.1-0(64bit).
Profit!! ;]
Just ignore or disable ota notices.
Sent from my LG K20 Plus using XDA Labs

Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Sent from my LG K20 Plus using XDA Labs

thrasher194com said:
Anyone can flash in twrp official app.. don't worry about device, just find twrp.img and flash. To easy. Thanks again @Travisholt92
Click to expand...
Click to collapse
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Sent from my LG K20 Plus using XDA Labs

thrasher194com said:
@Travisholt92, I had to reflash back to 4/8 twrp64.. the update was very glitchy..
Click to expand...
Click to collapse
Lack of touch? I fixed it already and reuploaded

Travisholt92 said:
Lack of touch? I fixed it already and reuploaded
Click to expand...
Click to collapse
It seemed the twrp bootscreen had hiccups, and so did reboot system.
Sent from my LG K20 Plus using XDA Labs

[ROOT] Galaxy S9 and S9+ Official Stock 8.0 MAGISK - UNOFFICIAL

Hello everyone this a little guide for rooting your Galaxy S9 and S9+ (EXYNOS) with Magisk
The Magisk file provided here is a modified one.
Quote:
READ THIS BEFORE ROOTING DEVICE
- Any of below said method to root will trip knox and void warranty forever.
- Root process needs wipe data so make backup of important data (including Internal Device storage) before proceed.
- As of now you will lose Samsung Pay and Secure folder forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device). Also you may not able to run some banking apps, you can use Magisk Hide
- OTA likely won't work once you root device.
- To unroot device completely, simply flash Samsung stock firmware, Remember, Unrooting won't revokes warranty nor you will be able to use Secure folder/Samsung Pay. Once rooted, these feature gone for you unless some magic happen in future and may find a way to use it.
Click to expand...
Click to collapse
This Magisk file is outdated, Magisk hide is not more working SafetyNet Fail
How to Use
Before Beginning I recommend update to the latest oreo update.
1.Enable Developer Option (settings - about phone - Software information - Tap 7 times on build number to activate developer option in settings menu)
2.Enable OEM Unlock from developer option (Currently no workaround for those who doesn't have this option )
3.Download TWRP for S9 or S9+
4.Switch Off device
5.Press Vol down + Bixby + Power to reboot to download mode, press volume up when asked to continue to download mode
6.Download Odin and open it, Disable 'Auto reboot' from option menu of Odin
7.Select TWRP (tar image) with AP tab of Odin and Start
8.Once Successfully flashed, you will see 'Passed' in Odin tab
9.Disconnect device and hold Vol down + power till screen goes off, Now immediately press Vol Up + Bixby + Power to reboot to TWRP
10.Select to allow modification
11.From TWRP, Select WIPE menu - Then FORMAT DATA - You need to type 'yes' to perform wipe. WARNING : This will erase all data including Int SD storage from device
12.Once format device completes, go back and select REBOOT' Menu and then - 'RECOVERY', This will reboot to TWRP again
13.Flash no-verity-opt-encrypt-samsung-1.0 and then Magisk
14.Once flash successfully finish, Reboot to System
15.Open settings - Developer option - Look for OEM Unlock option. It will automaticaly change to unticked after some reboot don't stress it's normal.
16.MAKE A BACKUP IN CASE OF BOOTLOADER RELOCK.
Enjoy ! You have your Galaxy S9 or S9+ rooted.
Credits goes to jesec [url]https://forum.xda-developers.com/member.php?u=6371894[/URL] for the modification of Magisk.
Magisk 16.3 modified:
[url]https://mega.nz/#!ec9zkDIA!w8Q77oIZAUgKUSePDmTsVBwfTKjU8C81WGdCgIUnQvM[/URL]
no-verity-opt-encrypt-samsung-1.0:
[url]https://androidfilehost.com/?fid=962187416754474353[/URL]
Twrp S9:
[url]https://twrp.me/samsung/samsunggalaxys9.html[/URL]
Twrp S9+:
[url]https://twrp.me/samsung/samsunggalaxys9plus.html[/URL]

Does this work with SD or only Exynos?

But tabletmen! le omelette du baguette! you can not le steal le someones le elses le work!

It it you tabletmen? Lol

What about Android pay, or is it just Samsung pay which no one really cares about?
Who are the key Devs working on magisk and getting root bugs fixed on Oreo for the s9?
Sent from my [device_name] using XDA-Developers Legacy app

Unheard said:
Does this work with SD or only Exynos?
Click to expand...
Click to collapse
im guessing its mainly for Exynos, but than again he hasnt answered back so im hoping its for Snapdragon also. that would be solid. thank you.

Anyone tried this?

kijp15 said:
im guessing its mainly for Exynos, but than again he hasnt answered back so im hoping its for Snapdragon also. that would be solid. thank you.
Click to expand...
Click to collapse
If someone find a way to unlock the bootloader of the SD devices this Tutorial will work.

rxk said:
Anyone tried this?
Click to expand...
Click to collapse
Yeap I did it !

Hi guys.
After all phases of the process I go through the Developper Options menu and I have OEM Unlock setting turned off. I have turned it on again, reboot but still disabled in the Developper Options. It is safe to reboot and keep it disabled? Please see the attached image. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So, I have rebooted my phone although OEM Unlock is disabled. And everything works fine, TWRP and root by Magisk included.

TidjyK said:
Hi guys.
After all phases of the process I go through the Developper Options menu and I have OEM Unlock setting turned off. I have turned it on again, reboot but still disabled in the Developper Options. It is safe to reboot and keep it disabled? Please see the attached image. Thanks.
Click to expand...
Click to collapse
You need to install the latest update on your phone.

TidjyK said:
So, I have rebooted my phone although OEM Unlock is disabled. And everything works fine, TWRP and root by Magisk included.
Click to expand...
Click to collapse
Greats but remain attentive that could brick the telephone.
To avoid any kind of problem DON'T UPDATE MAGISK.

frauchgu10 said:
You need to install the latest update on your phone.
Click to expand...
Click to collapse
The latest TWRP you mean?

Is this magisk the official version?

frauchgu10 said:
The Magisk file provided here is a modified one.
Click to expand...
Click to collapse
So this is not the official version.

TidjyK said:
The latest TWRP you mean?
Click to expand...
Click to collapse
No, the latest oreo update.

I have 2 problems after rooting in this way
1- Titanium backup dosnt show root & when i reinstalled it Crashed every time run .
2- Bluetooth reset every time turn off .
Can i unistall Magisk & then root with Supersu RC5 or i will face OEM problems ??

Need help.
after I modify prop.build (ro.config.tima=0) to fix samsung health. After reboot I lost root. Can I re flash magisk with oem unlock option disable?
please help..
-----
I rebooted my phone again and my root is back.
Tnx

rxk said:
Need help.
after I modify prop.build (ro.config.tima=0) to fix samsung health. After reboot I lost root. Can I re flash magisk with oem unlock option disable?
please help..
Click to expand...
Click to collapse
Yes

twrp and or custom roms for x704a (moto tab) tab4 10 plus???

Hi im trying to find if there has been proper recovery made for the x704a devices and if there is actually custom roms that support the x704a . I've searched and searched and cant find much solid info. I see tons of the 704f, l, etc. but cant find anything specific or will work with the x704a for sure. I have the tablet with the stock android 71.1. rom and its a buggy mess always lagging and have to restart multiple times a day just to be able to try to use it. And its done this from day one and even after reflashing the stock rom from scratch. Trying to find options to make this thing better vs throwing it in the trash and wasting the money i paid for it. All help would be appreciated . Thanks in advance

Hi I am using a recovery that works with the x704a its hard to find I will have a look for a link or I can send you the file.
Regards Ashley

Download the onekey unlock and the twrp.
The default language is Chinese.
https://drive.google.com/open?id=1H5k46hztwj_1FeBxzfFIXqo5hy0OpJvr

So what custom roms have you guys found for these?
Sent from my HD1925 using Tapatalk

This tablet blows...x704a
I watched tons of reviews on the Lenovo tab 10. All positive reviews. So, when I found a version with 1 less gig of ram but cellular support I jumped on it as a $200 gift for my wife. Lenovo, the Amazon seller used the same exact name for the x704f and x704a.. they are not the same , this tablet blows. I ended up getting her another tablet and we are stuck with this pos. I would like to get a rooted cfw like lineage and no luck so far.

I have the same problem! My tablet is a lenovo tab x704A and only information about x704F appears, I don't know if it is the same, then try with that info, unlock the bootloader, download the twrp recovery for x704F when flashing it tells me that the procedure was a success, but the device It does not restart in twrp recovery, I did everything using the commands, I did it manually from the tab and nothing is only the original recovery (oem) as if I had not installed it, it must be because that recovery is not compatible. If you can help me!

Tegra4Me said:
This tablet blows...x704a
I watched tons of reviews on the Lenovo tab 10. All positive reviews. So, when I found a version with 1 less gig of ram but cellular support I jumped on it as a $200 gift for my wife. Lenovo, the Amazon seller used the same exact name for the x704f and x704a.. they are not the same , this tablet blows. I ended up getting her another tablet and we are stuck with this pos. I would like to get a rooted cfw like lineage and no luck so far.
Click to expand...
Click to collapse
Are you talking about Lenovo Tab4 10 x704A ? Is that the one with the ATT logo on the back, cuz I have that (one with 2gb of ram) and its rooted with magisk and has lineage OS and works great. You do need a special twrp file though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

manny71 said:
I have the same problem! My tablet is a lenovo tab x704A and only information about x704F appears, I don't know if it is the same, then try with that info, unlock the bootloader, download the twrp recovery for x704F when flashing it tells me that the procedure was a success, but the device It does not restart in twrp recovery, I did everything using the commands, I did it manually from the tab and nothing is only the original recovery (oem) as if I had not installed it, it must be because that recovery is not compatible. If you can help me!
Click to expand...
Click to collapse
I have Lenovo tab x704A its one with the ATT logo on the back right? It uses a special twrp file that only works with x704A recovery-TWRP-3.3.0-0521-LENOVO_TBX704A-CN-wzsx150.img . No other x704 variants twrps work on x704A and I have tried. Download that try to flash that to your recovery. I used this ROM https://forum.xda-developers.com/t/...neageos-16-0-for-lenovo-tab4-10-plus.3923394/
I haven't gotten to try the newer OS10 Lineage 17.

Folty57fg said:
I have Lenovo tab x704A its one with the ATT logo on the back right? It uses a special twrp file that only works with x704A recovery-TWRP-3.3.0-0521-LENOVO_TBX704A-CN-wzsx150.img . No other x704 variants twrps work on x704A and I have tried. Download that try to flash that to your recovery. I used this ROM https://forum.xda-developers.com/t/...neageos-16-0-for-lenovo-tab4-10-plus.3923394/
I haven't gotten to try the newer OS10 Lineage 17.
Click to expand...
Click to collapse
So this rom works with the x704a?

Folty57fg said:
Are you talking about Lenovo Tab4 10 x704A ? Is that the one with the ATT logo on the back, cuz I have that (one with 2gb of ram) and its rooted with magisk and has lineage OS and works great. You do need a special twrp file though.
View attachment 5187855
Click to expand...
Click to collapse
Could you help me with step by steps to install the twrp which you provided. I have the same XB704A tablet and I’m not successful in installing this twrp. I’m stuck. Kindly reply here or mail me at [email protected]

Bhaskarrv said:
Could you help me with step by steps to install the twrp which you provided. I have the same XB704A tablet and I’m not successful in installing this twrp. I’m stuck. Kindly reply here or mail me at [email protected]
Click to expand...
Click to collapse
Enable developer options and in there select to unlock your bootloader by enabling OEM unlock and enable USB debugging
Connect your PC to your tablet and run
Code:
adb reboot bootloader
using adb on command line. The tablet will reboot into bootloader mode where you will only see the Lenovo logo. Now you use
Code:
fastboot oem unlock-go
to unlock. This will factory reset your device
Don't setup, cause you will need to format your tablet later again. Shutdown tablet. Hold volume up and power button to start to bootloader
Then run
Code:
fastboot flash recovery twrp-3.2.3-0-<your-filename>.img
to flash TWRP
Select with volume buttons "Recovery Mode" and press power button
Select to write to system, otherwise you can't flash ROM
Backup at least system and boot partitions to your sdcard cause you will wipe data in next step. Choose "System Image" for the system partition backup.
Flash the recovery that I mentioned. Recovery-TWRP-3.3.0-0521-LENOVO_TBX704A-CN
The instructions I used were from this thread.
[ROM][UNOFFICIAL][9.0][TB-X704F/L] LineageOS 16.0 for Lenovo Tab4 10 Plus
/* * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). * Please do some research if you have any concerns about features included in the...
forum.xda-developers.com
Use the twrp that I link, its only compatible with our tablet model. I rename it to like twrp.img then use "fastboot flash recovery twrp.img" instead of typing the whole name of the img file.

marcmann982 said:
So this rom works with the x704a?
Click to expand...
Click to collapse
sorry for late response, yes it works with x704a that what I screenshot it, you need a specific TWRP to install ROM