Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01
This kernel is only for AOSP base ROMs: AOSPExtended, LineageOS etc
How to install:
Download the flashable zip
Download (Oreo) the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
ZRAM support with LZ4 compression
XZ and LZO kernel compression support
XBOX joypad support(untested)
MSDOS fylesystem support
NTFS filesystem support
NTFS writing support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
maple I/O scheduler
Option to disable fsync
Various optimizations
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
V3: Download
V4: Download
V5: Download
XDA:DevDB Information
WhitePugKernel for the Galaxy Tab S2 WIFI 2016, Kernel for the Samsung Galaxy Tab S2
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-samsung_msm8976
Kernel Special Features:
Version Information
Status: Stable
Created 2017-06-20
Last Updated 2017-11-13
thanks!! I´ll try it today
Is this for the 713 or 813?
Edit: I dug into the code... For the 813.
New build is up :fingers-crossed:
Changelog:
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
Option to disable fsync
Fixing credits in repo, will fix OP later
joe2k01 said:
Fixing credits in repo, will fix OP later
Click to expand...
Click to collapse
What kernel manager do you suggest?
preference said:
What kernel manager do you suggest?
Click to expand...
Click to collapse
Kernel adiutor and LSpeed
When I try to flash both versions, I get error code 1 (something about a failure to repack the zip), Any idea what I'm doing wrong? I'm running the latest build of AOSP Extended.
Sraichvold said:
When I try to flash both versions, I get error code 1 (something about a failure to repack the zip), Any idea what I'm doing wrong? I'm running the latest build of AOSP Extended.
Click to expand...
Click to collapse
Can you send a screenshot of TWRP flash log?
Why do you have reverted this ?
https://github.com/joe2k01/WhitePug...mmit/0b880e9d5aecc5d3d56dc7d2599ebe89856d640b
It's an important change, please correct your merge conflict instead revert all
scafroglia93 said:
Why do you have reverted this ?
https://github.com/joe2k01/WhitePug...mmit/0b880e9d5aecc5d3d56dc7d2599ebe89856d640b
It's an important change, please correct your merge conflict instead revert all
Click to expand...
Click to collapse
This change hasn't been published in a build, so it's a WIP. Be sure that you are in the right before posting please
joe2k01 said:
This change hasn't been published in a build, so it's a WIP. Be sure that you are in the right before posting please
Click to expand...
Click to collapse
Please correct autorship of this kernel
scafroglia93 said:
Please correct autorship of this kernel
Click to expand...
Click to collapse
Almost everything correct, just need to adjust last 2 or 3 commits
joe2k01 said:
Can you send a screenshot of TWRP flash log?
Click to expand...
Click to collapse
Is this what you need? (and thanks for replying)
Sraichvold said:
Is this what you need? (and thanks for replying)
Click to expand...
Click to collapse
Will try to fix this ASAP
joe2k01 said:
Will try to fix this ASAP
Click to expand...
Click to collapse
Thank you! I'm looking forward to using your kernel!
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
Sraichvold said:
Thank you! I'm looking forward to using your kernel!
Click to expand...
Click to collapse
Did you retry to flash after a reboot? If yes and no success can you try this:
Boot in recovery
Flash zip
Open a shell and type: cd /tmp/anykernel && ./anykernel.sh
Post output here
joe2k01 said:
Did you retry to flash after a reboot? If yes and no success can you try this:
Boot in recovery
Flash zip
Open a shell and type: cd /tmp/anykernel && ./anykernel.sh
Post output here
Click to expand...
Click to collapse
Here's what I get.
Sraichvold said:
Here's what I get.
Click to expand...
Click to collapse
Thank you. Did you flash any mod to the boot image. You are on AEX right? Are you sure you are flashing only V2?
Related
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like bloated and fancy OP's. So I kept the thread simple and clean. Changelogs are not posted here. Check the link in the description.
All the best!
Click to expand...
Click to collapse
Features :-
Code:
* Based on official 4.1.B.1.13 sources
* Compiled using LINARO 4.7.3 Toolchain
* Added smart overclocking support upto 1.7 GHz
* Init.d support
* O2 optimizations
* CAF backport fixes
* Updated crc32 lib and jhash
* VDD sysfs level interface
* ARM_THUMBEE Support
* Removed debugging s**ts
* Optimized Low Memory Killer
* Swap and zram support
* ext 2/3/4 support
* Salvaged RAM
* Integrated CWM recovery
* SLUB Memory allocator
* LZO compression
* 2 way call recording
* CIFS, NTFS, FUSE and TUN as external modules
* Memcopy and compaction
* Added Cleancache
* Added frandom
* Optimized ARM RWSEM algorithm and ashmem
* /rootfs and /system mounted as rw
* Persistent adb
* Google Snappy Drivers
* Added other miscellaneous optmizations
* Governors : + Interactive
+ Ondemand
+ Performance
+ Userspace
+ Powersave
+ Conservative
+ InteractiveX
+ OndemandX
+ Smoothass
+ Brazilianwax
+ Smartass2 with boost pulse
+ SmartassH3
+ Intellidemand2
+ Virtuous
* IO Schedulers : + Noop
+ SIO - default
+ CFQ
+ VR
+ ROW
+ ZEN
+ Anticipatory
+ deadline
* [COLOR="Red"]See changelog or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"][U]Instructions[/U][/COLOR] :
* To flash : fastboot flash boot boot.img
* To hotboot : fastboot boot boot.img
* Via FlashTool
Credits : Wedgess for recovery
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> In case of bootloop, check for conflicting scripts in init.d. If problem persists, get me the logcat or last kmsg.
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. WiFi won't work?
> Flash attached WLAN modules.
6. Is autoroot included in ramdisk ?
> No. Autoroot isn't included. Just download flash-able root binary zip from site.
7. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
8. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
9. Which governors/IO-schedulers to use?
> Depends on your usage. See here for more info.
10.. Version X scored higher than version Y in benchmarks. OP, you screwed your kernel!
> Deal with it.
11. I need more info on something?
> You can find all answers here
Code:
[CENTER]CODENAME OF ARC : [COLOR="Red"]ANZU[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF ARC S : [COLOR="Red"]AYAME[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF PRO : [COLOR="Red"]IYOKAN[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF NEO : [COLOR="Red"]HALLON[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF NEO V : [COLOR="Red"]HAIDA[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF NEO L : [COLOR="Red"]PHOENIX[/COLOR][/CENTER]
Code:
[center][U]
[URL="http://www.mediafire.com/?kb784mb7ai4o8"][COLOR="BROWN"] Download Kernel [/COLOR][/URL][/center][/U]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-MSM7x30/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
Sorry got it! It's a folder with all of them! Ok I'll try on my Ayame Arc S!
EDIT: Where's the wifi modules?
FAdrums said:
I want to try but it's for all devices? Howcome?
Click to expand...
Click to collapse
Compiled for all 2011 MSM7x30 devices.
rachit.rc96 said:
I compiled for all devices from their source code [ anzu, hallon, iyokan etc ] Used wedgess ramdisk. Should work on all. However it has been tested by ARC/S users succesfully. Don't worry. The worst that can happen is that your device won't boot.
Click to expand...
Click to collapse
Yeah I know! But I need wifi modules!
FAdrums said:
Yeah I know! But I need wifi modules!
Click to expand...
Click to collapse
Added
Thanks! Gonna try it! Any sugestions for power saving?
SmartassV2/SIO?
FAdrums said:
Thanks! Gonna try it! Any sugestions for power saving?
SmartassV2/SIO?
Click to expand...
Click to collapse
First tell me if the device boots up successfully or not. i didn't test it.
rachit.rc96 said:
First tell me if the device boots up successfully or not. i didn't test it.
Click to expand...
Click to collapse
It boots!
All seem fine for now! Just thought It had more governors! Let me test a bit more!
FAdrums said:
It boots!
All seem fine for now! Just thought It had more governors! Let me test a bit more!
Click to expand...
Click to collapse
Phew! It's the first release. Expect more governors in next update bro. Here, take my thanks.
rachit.rc96 said:
Phew! It's the first release. Expect more governors in next update bro. Here, take my thanks.
Click to expand...
Click to collapse
A few things:
Flashed modules and it said it was the Lupus modules for mdpi so my wifi is not working! -.-
FAdrums said:
A few things:
Flashed modules and it said it was the Lupus modules for mdpi so my wifi is not working! -.-
Click to expand...
Click to collapse
same here!
FAdrums said:
A few things:
Flashed modules and it said it was the Lupus modules for mdpi so my wifi is not working! -.-
Click to expand...
Click to collapse
It's just his updater script i used for ease. ( May be i am too lazy ). Modules are 4.1.B.1.13 source based. They are not working?. Make sure you have stock wifi modules. Flash my kernel modules over them. report then
rachit.rc96 said:
It's just his updater script i used for ease. ( May be i am too lazy ). Modules are 4.1.B.1.13 source based. They are not working?. Make sure you have stock wifi modules. Flash my kernel modules over them. report then
Click to expand...
Click to collapse
Going to try it! Another thing...you said double recovery...wheres the TWR?
It Boots! But the red led is always ON !
FAdrums said:
Going to try it! Another thing...you said double recovery...wheres the TWR?
Click to expand...
Click to collapse
Sorry, I copied the code from my other kernel thread which has dual recovery. Almost forgot. As I said, it's CWM by wedgess. Will add dual recovery in next releases.
Sorin90 said:
It Boots! But the red led is always ON !
Click to expand...
Click to collapse
Yes. It's 1.20 bug. Testers reported that. Are you using latest 1.21? becasue i fixed it in that.
rachit.rc96 said:
Sorry, I copied the code from my other kernel thread which has dual recovery. Almost forgot. As I said, it's CWM by wedgess. Will add dual recovery in next releases.
Click to expand...
Click to collapse
Hey man, if you find a fix for dual recovery, do let me know I have my own cm10 kernel, but it only boots TWRP properly not CWM.
Thankyou.
emwno said:
Hey man, if you find a fix for dual recovery, do let me know I have my own cm10 kernel, but it only boots TWRP properly not CWM.
Thankyou.
Click to expand...
Click to collapse
Sure.
Modules will work if you flash stock .587 ones first!
Will test during the day! Thanks for your work!
Sent from my LT18i using Tapatalk 2
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now (even more) void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if you get screwed up because of that, it's entirely your fault.
*/
Hiya fellas.
I suppose yall know that there's a ported rom from titan/thea (IDCrisis) for our Moto G. And I've ported a rom myself (but I don't plan on releasing it >.<). And this kernel is designed to work with any stock-based (read: ported from titan) rom for our device (especially IDCrisis).
But fair warning: don't even think about flashing it on Lollipop.
Features:
Sources & Optimizations
- Based on CM13's shared falcon/peregrine/titan/thea sources
- Compiled with Uber Toolchain 4.9.4
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove No more!!!
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w Nicht mehr!
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz) No more!!!
Click to expand...
Click to collapse
Extra Sh*t
- Simplified msm-thermal driver by @kwoktopus Was causing trouble
- Disabled gentle fair sleepers
- USB Fast Charge
- Extra TCP Congestion Controllers
- Compass & Accelerometer drivers now use State Notifier Was causing trouble too
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
For Falcon:
Standard Version
Permissive Version (Flash this only if you're having major SELinux-related issues)
Click to expand...
Click to collapse
For Peregrine:
Standard Version
Permissive Version (Flash this only if you're having major SELinux-related issues)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Looking for previous releases?
Pre-reset builds:
Falcon releases
Peregrine releases
Click to expand...
Click to collapse
Post-reset builds:
Falcon releases
Peregrine releases
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Ran into issues? Go back to the stock kernel - just download one of these!
New Stock IDCrisis Kernel (Adapted from CM13) - Falcon
New Stock IDCrisis Kernel (Adapted from CM13) - Peregrine
Click to expand...
Click to collapse
Flashing Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage, i.e. /sdcard (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!! This is a bug on the install script's side. I'll be looking into it.)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @lost101, for creating IDCrisis
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @kwoktopus, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (IDCrisis), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/idcrisis
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R7
Stable Release Date: 2017-01-02
Current Beta Version: R6 Beta 2
Beta Release Date: 2016-11-01
Created 2016-03-26
Last Updated 2017-01-02
Reserved
Reserved
Reserved
Reserved!
Reserved
Reserved!
For those of you running IDCrisis, no matter which version.
Flash the stock kernel before flashing my kernel. I'll upload a stock titan/thea boot image for you guys to use.
Edit: Here's the image. It doesn't include any modules.
https://www.androidfilehost.com/?fid=24459283995306368
kingkaminari said:
For those of you running IDCrisis, no matter which version.
Flash the stock kernel before flashing my kernel. I'll upload a stock titan/thea boot image for you guys to use.
Edit: Here's the image. It doesn't include any modules.
https://www.androidfilehost.com/?fid=24459283995306368
Click to expand...
Click to collapse
do i need to flash it even if i have the previous version of your idcrisis 2.0?
if yes do i need stock modules also?
Using the latest (1.2) Identity Crisis, single SIM, normal (non-GNL) version. Using the IDCrisis version of the kernel recommended by lost. Falcon 2013 xt1032.
Want to try this kernel. Flashed the stock Titan/Thea image as instructed. Everything fine. Proceed to try to flash the Kernel. Error message. Something like "this kernel is for Lollipop 6.0.x (SDK 23). Your version is Marshmallow 6.0 (SDK 23)". Can't flash. Odd.
I reflashed the older IDCrisis kernel, and it's fine (hello from my Moto G) so at least it didn't go horribly wrong.
same here, couldn't flash it
+1
Enviado desde mi XT1072 mediante Tapatalk
Lolz. Looks like i did **** with the install script. Please open meta-inf/com/google/android/update-binary and remove the compatibility check part (do NOT remove anything else).
I'll upload a fixed flashable zip soon.
Here are the fixed flashable zips. Sorry for the derp, guys.
I lost my root permissions. Of SuperSU when I installed this kernel.
mahadev111 said:
I lost my root permissions. Of SuperSU when I installed this kernel.
Click to expand...
Click to collapse
Was your root systemless? Just reflash SuperSU.
kingkaminari said:
Here are the fixed flashable zips. Sorry for the derp, guys.
Click to expand...
Click to collapse
no worries mate. anyway, i'm able to flash the zip now but it gets stuck on M logo, what's wrong?
lucastracq said:
no worries mate. anyway, i'm able to flash the zip now but it gets stuck on M logo, what's wrong?
Click to expand...
Click to collapse
Funny, mine gets stuck at the WARNING BOOTLOADER UNLOCKED screen (I never got rid of that).
....But hey, it flashed.
Damn. I forgot to say, thats an experimental build using a new codebase. I'll have to switch to the old codebase...
Here's a build based on the old codebase. It has selinux force-set to permissive. Hopefully it boots.
Edit: There's a peregrine version as well.
And here are builds based on the new codebase, also with selinux force-set to permissive.
Selinux on marshmallow is a *****.
Choochter said:
Was your root systemless? Just reflash SuperSU.
Click to expand...
Click to collapse
Yes,root was systemless,I was on identity crysis 1.1d.when I reflashed SuperSU.stucked at boot logo.then I have to reflash rom.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08
ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script
Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.
It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.
Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?
Thanks, waiting for N7502 custom ROM
Good job @FireLord
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk
FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH
FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk
FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot
JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk
Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk
biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong