Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Access to the original/official firmware for SM-G900F would be extremely helpful for me as well.
I'm running LOS 16 with pico GApps very happily on my S5, however I have mobile data connectivity issues. Data connects and disconnects at random; this is device-dependent (swapping the SIM into other devices gives fully functional data connectivity).
My baseband is G900FXXU1BOA3; I believe updating the modem might fix this?
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
Fox, you may download the official firmware at https://samsung-firmware.org/model/SM-G900F/
Select your region to get the right ***.md5.tar file to flah via Odin latest.
This will reset your handheld to out of box - original recovery reinstalled - you must reflash it also via Odin if you want to go back to custom Rom..
Good luck
.
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
kwajongen said:
Thank you.
What would be my region?
I purchased it in the US unlocked, but US is not a choice when it comes to region.
Would I be able to see the region the phone is from from the baseband #?
Alex
Click to expand...
Click to collapse
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Captain Kangaroo said:
If your reference to the baseband version# is correct -> G900FXXU1ANCE, then the region is BTU -> check this address to download the original firmware:
https://samsung-firmware.org/downlo...agon-__/1806/BTU/G900FXXU1ANCE/G900FOXA1ANCE/
After flash via Odin, reboot and optional reinstall TWRP via Odin to use other custom Roms.
Are you sure you did everything before resuming to scratch. Personaly I would have done the following:
- back up in TWRP (at least data) + back up in google drive if you use google or titanium, (anyway save your picts, ...) if rooted, it is possible to save the file containing SMS, ... search in XDA,
- format (not wipe) !!!! WARNING THIS WILL ERASE ALL !!!!!
- clean install the ROM (lineageOS or else) + optional Gapps (I use Pico),
- reboot and restore data (as shown in 2 above)
(The Roms I use on my two KLTE by personal preference order are Havoc, DotOS, Bootleggers, Resurection Remix, MSM-Extended. I also use LineageOS.
Click to expand...
Click to collapse
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
kwajongen said:
That site is very buggy, if I search my model and enter all the other info I get to Lollipop 5.0, if I click your link, although I am registered, it does not allow me to the link you provided, I mean I can get to it but when I try to login, it takes me back to the home page, so there is no way to get to your same link while being logged in.
How do I get do the download page it is a mystery to me.
Also, how do you know from the base band that it is BTU region?
Thank you
Alex
PS: I managed to use your link in IE, this site is stone age! Unbelievable, never seen a website like this, there are bugs everywhere.
Click to expand...
Click to collapse
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
kwajongen said:
Hi guys,
My S5 was on 6.0 and have upgraded to 9 Pie but something went wrong (or I screwed up something) and I need to re-upload the original firmware, unless you have better suggestion.
Currently, I have TWRP installed as well as Android 9, however, when I turn my S5 on, I get: Set Warranty Bit:Kernel
It stays there for 30 secs then the phone boots up and everything looks fine, it connects to wi-fi etc.
One other strange thing is that I get a message on the home screen saying: unsupported SanDisk SD Card
I tried a new one, same message.
Before I started this process, I connected the phone to my PC and copied both the Phone and the Card folders, so I am good, data wise.
Basically I was thinking to go back to the very first OS, I think 4.4.2 and then re-load Lineage 16 using TWRP.
If I read the baseband version # is: G900FXXU1ANCE
If the procedure above is correct, would you be able to provide me a link to download the firmware?
I tried all the known sites, but their speed sucks, so I thought to ask here as somebody may have a link.
I will use Odin latest version to install it.
Thank you!
Alex
Click to expand...
Click to collapse
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
2. Basically you can search websites that had official Samsung stock firmware. Search your region of your device and (IMPORTANT!) your model, in your case, is G900F. (Wow same as mine but different region, Snapdragon rocks).
3. To your network problem, I think you need to wait. There is no other option.
Thanks!
Edit: https://forum.xda-developers.com/showthread.php?t=2715487
XDA forums has one. Tip: if your region isn't there, the replies have all the filmwares you can have.
Captain Kangaroo said:
Men, the subject of resuming to firmware has been discussed and is described in the net literature! e.g. in XDA Q&A.
This discussion is now not a thread anymore but a dialog and I’m sure it will be closed by XDA moderator for redundancy.
The warnings given when you flash a custom Rom are clear. It also implies “before all” to backup, but also keep all materials to resume to original firmware, …. Now I cannot help anymore because you have problem with downloading the firmware.
Last advice – google baseband# - there are probably other web options or torrents
!!!!Also use the thanks button!!!!
Click to expand...
Click to collapse
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
OfficialJohnGL4 said:
1. Its normal to have the "Set warranty: kernel" text. As my device does too. Just simply ignore it. It won't harm your device.
Click to expand...
Click to collapse
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
kwajongen said:
I have downloaded the firmware and this evening I will try to upload it and see what happens.
I still I have no answer to my question: how did you figure out that my firmware is BTU?
I mean, I gave you my baseband version #: G900FXXU1ANCE and when you eventually find it in any firmware sites you are given the choice to choose among many countries, expect USA and Canada.
Since I bought the phone in the US I still wouldn't know which country the firmware is from.
Would you mind to shed some light on this?
Thank you!
Alex
Click to expand...
Click to collapse
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
kwajongen said:
Thank you for your feedback John.
I am not sure that message is normal, if you google it they all say it is an issue with the firmware and that you need to go back to the stock one to fix it.
Is there anyone else with lineage having that same message?
Also, when I try to format my SD Card, it gets stuck to 40% and then it goes to the homepage.
I tried also a brand new card, same story.
It gives a message but it goes away after a few secs., I believe it is a Java message, but I can try again and take a picture of it.
Thank you,
Alex
Click to expand...
Click to collapse
When it said that you go back to stock one to fix it. Then want if it is not stock? The message is still there. Its normal if you want to install a custom ROM other than the stock one. I reinstall the stock and install custom ROM again once. It still happened.
I don't know how to remove the text but still have a custom ROM tho.
As for the SD card message, I encountered times before. Maybe you need to format using the computer.
Captain Kangaroo said:
I tell you my experience:
No matter the country you bought your device. As example, I leave in France, I bought mine in Hong-Kong, but choose an international device (G900F).
Before flashing anything, I checked all information in settings and recovery.
Pict below is original out of box G900FXXU1BOC7
Recovery information after latest update G900FXXS1CQD1
It happened recently 2 times my device was stuck because encription issues – I recover by reflashing original G900FXXU1BOC7 via Odin
I personally downloaded firmware as G900F – BTU, because I check the version at each updates and this sticked to BTU ONLY.
May be the site SamMobile will be more meaningful for you, because you see Countries/Operators and updates history.
https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900F/BTU/
For your device, you have to grab the search to find the closest original (which you have) to latest update (if you have it).
For the Kernel yellow tag at warmup, this is done when you flash TWRP. No issues since 2 years operation with that using LineageOS, Havoc, DotOS, AOSP, Bootleggers, RR, ViperOS. If you flash original firmware, it will disappear because twrp is erased and original stock recovery flashed.
Click to expand...
Click to collapse
When I reflash the stock ROM TWRP is still there. However no "Set warranty: kernel" appeared. Maybe its just when you install a custom ROM or something, I don't know.
OK guys,
Lineage 16 is installed, everything went smoothly, however when I connect the USB, the phone just shows as 'SM-G900F' on my W10 PC and cannot be expanded, basically no Phone and SD Card folders.
I can see them in the phone no problem, but once I connect it, I am not prompted with the usual message on what I want to do, like file transfer etc. and on the left menu appears only the model of the phone.
I had no issues when I flashed the original firmware, so it must be related to Lineage.
I also installed the Android USB drivers, but no go.
Changing the USB Preferences, to PTP or File Transfer only allows me to see the phone, no SD.
I also tried a new SD, no success.
I am stuck again... Jeez it takes days to get this stuff to work, you do one step ahead and another back
Ideas?
Alex
Anyone?
Shall I ask the question in the Lineage section?
'Set warranty :kernel' means you are running a custom kernel. Any modified boot.IMG can cause this message. It doesn't mean you need to use stock room. This appears even in stock rom with magisk or SuperSU.
Hello everyone, being new to xiaomi devices, i would like to ask about updating. So my mi8 is currently on miui global 11.0.2 (PEAITTI) which i suppose is an italian variant. My problem is that the updater does not find any new updates despite the fact that there are. So I searched for manual update and found this https://c.mi.com/oc/miuidownload/detail?guide=1 . My question is this is local update used for every factory rom regardless of the area and without the need to unlock the bootloader? And is fastboot update for every rom?
Extra quetion: Do i lose something by unlocking the bootloader except the warranty? (asking that coming from sony device)
Thanks in advance.
I have some experience installing MIUI and I advise you not to "mess" with the bootloader.
There is a condition that your device goes into "Brick" mode. See- https://forum.xda-developers.com/mi-8/help/undo-fastboot-oem-lock-t4126427
by unlocking the bootloader You will be exposed, to some extent, to intrusions into your device by hackers.
The safest situation is to only update the system by OTA! especially that you have an "Italian" MIUI system (which appears to be global).
On the other hand, if you have prior knowledge and experience, you can update your system independently, even though there is a risk, by flashing through software you can find on the network.
mitsosJL said:
Hello everyone, being new to xiaomi devices, i would like to ask about updating. So my mi8 is currently on miui global 11.0.2 (PEAITTI) which i suppose is an italian variant. My problem is that the updater does not find any new updates despite the fact that there are. So I searched for manual update and found...
Click to expand...
Click to collapse
Have you found a solution? I have the same problem. The latest version is 11.0.4.0QEAMIXM, but it cannot be installed by updater because "the current ROM's network carrier type is different from that in the Recovery package".
philph said:
Have you found a solution? I have the same problem. The latest version is 11.0.4.0QEAMIXM, but it cannot be installed by updater because "the current ROM's network carrier type is different from that in the Recovery package".
Click to expand...
Click to collapse
I haven't searched further into the subject due to lack of time in the current period and I'm fine not having the latest software as long as the device runs without problems (don't fix it if it ain't broken).
After reading your post again, I guess the "original" rum installed in the mitsosJL device, was installed by the seller who sold you the device.
You should first check if your bootloader is locked or open. (See https://gadgetmeetsguy.com/how-to-check-if-bootloader-is-unlocked/
If you decide to "unlock" the bootloader and install an update on your device, you will find many how-to guides.
I received an update via OTA for my Xiaomi Mi 8 device.
Update Name: 11.0.4.0 QEAMIXM Global.
There are not many changes since most of them are suitable for certain "regions", like China-India and some other countries in the world.
In any case, my recommendation of 02.07.2020 is still valid.
Good day to you.
I bought a LM-V450ebw Dual SIM with android 8x, probably HongKong distribution. I've beed trying to flash it to EU/Polish ROM (android 10) with no possitive effect (I want to have volte and wifi calling - that's the main reason to update).
I've beed trying LGUP 1.14-1.16 with different LGDLL but no way to overcome "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Finally I tried to update to android 10 Hong Hong version and I succeeded (v30b-lao-yt). But still no success in moving to EU/Polish ROM (android 10) via LGUP - "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
It looks like, there is no problem to move between HK version but no way to move from HK -> UE/Polish.
Of course LG Bridge doesn't help much.
What's wrong? Is there any way to do it without rooting?
pjgadek said:
I bought a LM-V450ebw Dual SIM with android 8x, probably HongKong distribution. I've beed trying to flash it to EU/Polish ROM (android 10) with no possitive effect (I want to have volte and wifi calling - that's the main reason to update).
I've beed trying LGUP 1.14-1.16 with different LGDLL but no way to overcome "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Finally I tried to update to android 10 Hong Hong version and I succeeded (v30b-lao-yt). But still no success in moving to EU/Polish ROM (android 10) via LGUP - "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
It looks like, there is no problem to move between HK version but no way to move from HK -> UE/Polish.
Of course LG Bridge doesn't help much.
What's wrong? Is there any way to do it without rooting?
Click to expand...
Click to collapse
For most of the variants all that's needed to crossflash is to use 1.14 and choose 'partition download'. But the HK dual sim variant is a pia. You can lose one or both sims if not done correctly.
I'd suggest, in rom forum see initial thread for lineage os and find invite to join v40 tele group. Ask there as those guys have much more international experience especially with dual sim variants.
cheers
Similar problem wit a new LM-V405EBW running Android 9 sec patch 1 June 2019
It is supposed to be an European version, came with a EU charger ...
Current software V20a-LAO-YT
Checked with a IMEI checker that said it is a DEC region phone.
It seems LG has removed V40 Thinq from the supported devices,
cannot get any OTA updates :-(
I want to install V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
latest DEC firmware I think.
When I try LGUP i get the same error mess as above
"error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Tried both "refurbish" and "update" same error.
I don't mind to wipe the phone clean,
but when i select the "Partition DL" i get more than 10 options,
which one(s) should i select ?
Hope I can get some advice.
LG_User_42 said:
Si
I don't mind to wipe the phone clean,
but when i select the "Partition DL" i get more than 10 options,
which one(s) should i select ?
Hope I can get some advice.
Click to expand...
Click to collapse
all of them except ftm. Then, when it finishes and reboots, do the refurbish (twice) with the same kdz.
cheers
Evening! I bring you a solution, it seems a strange solution, but after weeks of trying anyway, the only one that did not occur to me, is to disconnect it while I was flashing the rom that I put wrong to downgrade it, i cause a provocated brick, what is my surprise when insert the IBR rom (before it had the TIM) it started flashing without problem.
Mobile to repair: Lg K41S (LMK410EMW)
Use this version of the LGUP flash tool: LGUP_Dev-1.14 (patch)
Hello there🖐️I own an Oppo Find X3 Pro (model CPH2173), the phone was purchased from Italy in summer of 2021.Since November/December 2021 I haven't received any security update. I tried all kinds of methods, VPNs, factory reset, but nothing worked.
Currently the phone has Android 11 based on ColorOS 11.2. Btw I live in Romania (Est Europe), I use the phone with a romanian SIM card.
Any idea what I should do to get software updates?
I can install an update manually if anyone got a download link.
P.S.: I saw someone from Maroc with the exact same problem as mine, but I think that post was deleted.
ionut1708 said:
Hello there🖐️I own an Oppo Find X3 Pro (model CPH2173), the phone was purchased from Italy in summer of 2021.Since November/December 2021 I haven't received any security update. I tried all kinds of methods, VPNs, factory reset, but nothing worked.
Currently the phone has Android 11 based on ColorOS 11.2. Btw I live in Romania (Est Europe), I use the phone with a romanian SIM card.
Any idea what I should do to get software updates?
I can install an update manually if anyone got a download link.
P.S.: I saw someone from Maroc with the exact same problem as mine, but I think that post was deleted.
Click to expand...
Click to collapse
Contact assistance and probably they will unlock update for your phone like I saw for others.
VampireHeart said:
Contact assistance and probably they will unlock update for your phone like I saw for others.
Click to expand...
Click to collapse
Sadly, for me the Oppo assistance said that this OTA issue is related to my carrier and my carrier said that their customer service is only open for SIM card or line issues. So I'm following each post in this thread too.
I'm in France with a french refurbished phone and RED SFR operator.
qboot said:
Sadly, for me the Oppo assistance said that this OTA issue is related to my carrier and my carrier said that their customer service is only open for SIM card or line issues. So I'm following each post in this thread too.
I'm in France with a french refurbished phone and RED SFR operator.
Click to expand...
Click to collapse
A crazy situation
Wasn't there a thread here, where someone got a tool by Oppo support which downloads and installs the latest version ....
Jorgo-Bo said:
Wasn't there a thread here, where someone got a tool by Oppo support which downloads and installs the latest version ....
Click to expand...
Click to collapse
Yeah I tried that oficial Oppo app, but it didn't work.
Make sure all Apps are.up to date
Check for Google-Play-System Update as.well!
-> Password and Security
1. Disable WLAN
2. App-Managemt:
-> Show system files (3 dots)
-> search for update.
-> Delete data in the 3 showd files
3. Reboot
4. Wait 5 min till the phone is fully loaded.
Check WLAN is still disabled
5. Check for Update without VPN
6. If without succeed use VPN France and check for Updates
7. Still without success contact Oppo
BTW is this the tool ?
https://www.oppo.com/content/dam/oppo/event-page-asset/rom/files/en/ColorosUpgradeToolSetup-V1.0.11.exe
OPPO Firmware, ColorOS Software Update | OPPO India
Get the latest OPPO firmware updates to optimize system performance and enhance system stability. Download the latest ColorOS software version now!
support.oppo.com
Yes, it's that app. I already did what u said there and I got nothing.
I solved the same problem by taking it to the Oppo service center, the phone was updated and returned within hours
I'll try to do that