Database Develop

Cannot mount /vendor

Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027

Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.

HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.

Hi, I want to

Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido

@Sajag I flashed recovery with twrp with treble support.

Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??

Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.

Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F

I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????

Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp

Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.

Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating

Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom

Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987

Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher

Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue

Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me

Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?

HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!

Decrypt.zip for Asus Stock Pie ROMs.

Decrypt.zip for Asus Stock Pie ROMs.
Thanks to @SagarMakhar
Download:
https://drive.google.com/file/d/1RUXe6g_gqG_LRM8qi-g9gqjqhm7BA0bO/view?usp=drivesdk
****Procedure: (Different from Oreo).****
1.Flash Rom
2.Reboot to Recovery (TWRP)
3.Mount /Vendor
4.Flash Decrypt.zip
-------------------------------------
#Flash order we used for Oreo wont work.
Hit Thanks if i helped.
Edit[ 30 May 2018] : A new TWRP is been published that doesn't require this zip while flashing stock roms.

Decrypt for Pie stock rom - Asus Max Pro M1
Hi,
Thank to your post, however, when I tried to download the file, it say that I must obtain your approval. Can you give approval to the request or change the publish mode of the file on drive?
Thank you
akhil850 said:
Decrypt.zip for Asus Stock Pie ROMs.
Thanks to @SagarMakhar
Download:
****Procedure: (Different from Oreo).****
1.Flash Rom
2.Reboot to Recovery (TWRP)
3.Mount /Vendor
4.Flash Decrypt.zip
-------------------------------------
#Flash order we used for Oreo wont work.
Hit Thanks if i helped.
Click to expand...
Click to collapse

nemo1810 said:
Hi,
Thank to your post, however, when I tried to download the file, it say that I must obtain your approval. Can you give approval to the request or change the publish mode of the file on drive?
Thank you
Click to expand...
Click to collapse
LINK NOW UPDATED
Thanks You

I can download it now, thank sir .
akhil850 said:
LINK NOW UPDATED
Thanks You
Click to expand...
Click to collapse
:good:

nemo1810 said:
I can download it now, thank sir .
:good:
Click to expand...
Click to collapse
NP, Hit thanks if i helped

didn't worked for me i m on latest pie 053 i updated to latest firware and the i falshed this zip while mounting vendor
Update - It worked after i updated to the latest magisk 19.4 Thanks mate

akhil850 said:
Edit[ 30 May 2018] : A new TWRP is been published that doesn't require this zip while flashing stock roms.
Click to expand...
Click to collapse
@akhil850
The official TWRP????
If not, please provide us the link of that TWRP which doesn't require this zip to be flashed after flashing stock ROM. I am planning to upgrade my device from Oreo to Pie, but I read somewhere that flashing decrypt.zip of Pie is erasing MAC IDs of wifi adapter. Can you please confirm that this zip is not erasing MAC ID of wifi adapter?

dang it, I got system corrupt notice after unlocked bootloader notice. Then it goes turn off.
After that I got that notice again while using pie firmware, any suggestions?

[RECOVERY][UNOFFICIAL][ONCLITE] TWRP 3.3.1-x

HTML:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Introduction
This is an unofficial build of TWRP for Redmi 7 (onclite).
Based on TWRP version: 3.3.1
For device: onclite
Maintainer/Authors build: Galitsky Dmitry([email protected]/ [email protected])
Device tree: https://github.com/krot-melles/device_xiaomi_onclite-TWRP
In development plans
Supports CAF-based wrappedkey encryption (decryption) properly
Implemented
Mounts the system partition at /system_root as per AOSP standards.
Support install custom ROM (PE,RR and other)
Installation Instructions
Fastboot
Grab the recovery.img from extracted folder
Reboot device in fastboot
Run "fastboot flash recovery recovery.img" from fastboot
Boot into recovery
Downloads
IMG:Release list
Created 2019-05-10
Last update 2019-08-15

Thanks. I will try when I will arrived to home.
Is it control vendor partition too...?

I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0

Somehow it wont flash the recovery on the 16/2gb version, yes phone is unlocked.
after abd flash recovery recovery.img it says ok, but after reboot no twrp but the original redmi bootloader v3.0.

TWRP is not flashable to Locked bootloader!
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM

please read, phone aka bootloader is unlocked.

Sorry. I ve read wrong.
So. On new phones need different install method
1.fastboot flash recovery recoveryname.img
2.fastboot boot recoveryname.img
(if img booted, you need reflash third recoveryname.img in TWRP, and you need install Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip then reboot if you want to use stock system)
or
1.fastboot flash recovery recoveryname.img
2.press an hold volume up
3.fastboot reboot command (on pc, press enter...but hold volume up constantly)
4.maybe then after mi logo, TWRP will launching
5.make format data with TWRP
6.install custom ROM
Day by day Xiaomi system is more closed.
朱利安死了.請不要再打電話給他.红米7标准版3GB32GB稳定MIUIv10.3.6.0PFLINXM

Ok got it working now thanks.
indeed little bit different than other phones i have used.

Update TWRP
15082019
BoardConfig: fixed PARTITION_SIZE values ​​equated to partition.xml values
fstab: some fix
Click to expand...
Click to collapse
TWRP download

Do this recovery support decryption in stock ROM?

sherindroid said:
Do this recovery support decryption in stock ROM?
Click to expand...
Click to collapse
No((( maybe fix it in next build

Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?

AdamWilling said:
Can I install ROM Builder from mi-globe.com? Can I take an error "Updater process ended with: Error 7"?
Click to expand...
Click to collapse
Do you have the opportunity to take a screenshot or error log???

can you flash apps with this version of twrp?

melles.android said:
Do you have the opportunity to take a screenshot or error log???
Click to expand...
Click to collapse
I already didn't tested...but maybe I know the problem, in redmi 7 is wrote onclite on every rom, but getvar of device is onc

Good work but encryption problem i hope get fixed

does this handle decryption and can disable dm-verify?

need help
JulianJenner said:
I've installed your TWRP.
Unfortunately it is cannot bypass the encryption-decryption problem. Unfortunately, "format data" is required...
I need TWRP for Global Stable...but if I format data, after no SIM-card, and other problems (not suitable for MIUI incremental OTA)...this is good for custom roms only.
But very-very thanks your work.
Maybe next build will be better.
小米8青春版4/64国际版MIUI10.3.2.0
Click to expand...
Click to collapse
hey julian i am replying you on this thread as the https://forum.xda-developers.com/redmi-7/how-to/redmi7-lr-team-twrp-3-3-0-redmi7-cn-t3924278 (this) is closed.
i am searching for a working recovery but available twrp are not getting the job done. i am looking for the recovery you talked about can u please refresh the download link or share the recovery with me as the given given in the orignal post dosent work anymore. Thanks in advance

I have no Redmi7 anymore.
Sent from my MI CC9 Pro using Tapatalk

Lineage OS 14.1 XT926_JBBL

Unofficial Lineages OS for Razr HD (xt926_jbbl)
This is only for JBBL do NOT try on KKBL
I am not responsible for bricked devices, loss of data, dead SD cards,
* loss of hair, thermonuclear war, or you getting fired because the alarm app
* failed. Please do some research if you have any concerns about features included
* in this ROM before flashing it! YOU are choosing to make these modifications, and
* if you point the finger at us for messing up your device, everyone will laugh at
* you and I will deny any wrong doing or responsibility.
Procedure
NB: You must format your Data and Cache partitions as F2FS
Download the latest PICO or NANO GApps from OpenGapps
Backup your internal SD Card, off of the device eg USD or Hard Disk
Boot to TWRP
Make a nandroid backup, and ensure this backup is not on the device itself
Format your data partition and cache partition to F2FS (do NOT post for instructions on how
to do this on this thread!)
Wipe Cache , System & Dalvik-Cache
Flash the ROM Zip
Flash Gapps ARM -> 7.1
Wipe cache and dalvic
Done - Reboot to [System]
Wait...
lineage-14.1-20200214-UNOFFICIAL-xt926_jbbl
Security patch level Feb 05, 2020
Changelog https://www.lineageoslog.com/14.1
Download rom and recovery here: https://www.androidfilehost.com/?w=files&flid=304892
Known issues:
You tell me
XDA:DevDB Information
Unofficial Lineage 14.1 XT926_JBBL, ROM for the Motorola Droid RAZR HD
Contributors
Wheels564
Source Code: https://github.com/wheels564
Thanks go out to the Lineage team for maintaining Nougat roms
Also thanks to Metalor for his source work which this rom is based on
And DiamondJohn for his tutorial on building TWRP from source
ROM OS Version: 7.x Nougat
ROM Firmware Required: JBBL
Based On: Lineage
Version Information
Status: Nightly
Created 2020-02-18
Last Updated 2020-02-18

Reserved

Reserved again

Wow, twrp 3.1.1, impressive. I really didn't think that we could get it up that high. Good work! And feel free to try a higher twrp version (minimal manifest 8.1 does give you twrp 3.3.1 )
Btw, decompiled your recovery. Not sure where you have your twrp flags, but whatever board config file they are in, add in TW_EXCLUDE_SUPERSU := true , as magisk is the replacement to supersu

palmbeach05 said:
Wow, twrp 3.1.1, impressive. I really didn't think that we could get it up that high. Good work! And feel free to try a higher twrp version (minimal manifest 8.1 does give you twrp 3.3.1 )
Btw, decompiled your recovery. Not sure where you have your twrp flags, but whatever board config file they are in, add in TW_EXCLUDE_SUPERSU := true , as magisk is the replacement to supersu
Click to expand...
Click to collapse
Minimal manifest from Lineage only goes to nougat. The rest of twrp is on Omni. I have to rebrand everything to Omni and there are other changes that need to be made for it to build. It's gonna take some time and I don't have a lot of it right now. BTW I have twrp working on mb886 but you have to use a mouse. I got lineage 13 to install on it but am having trouble with 14.1.

palmbeach05 said:
Wow, twrp 3.1.1, impressive. I really didn't think that we could get it up that high. Good work! And feel free to try a higher twrp version (minimal manifest 8.1 does give you twrp 3.3.1 )
Btw, decompiled your recovery. Not sure where you have your twrp flags, but whatever board config file they are in, add in TW_EXCLUDE_SUPERSU := true , as magisk is the replacement to supersu
Click to expand...
Click to collapse
Just compiled a new recovery. Check and see if thats what you want. My main computer is compiling a rom right now.

Sorry for a novice question. Can I install the TWRP image in my xt907 TWRP on my xt926.

yoshkapundrick said:
Sorry for a novice question. Can I install the TWRP image in my xt907 TWRP on my xt926.
Click to expand...
Click to collapse
If you have JBBL you can use the TWRP from the link to androidfilehost. It's specifically made for the xt926 but only if you have jelly bean boot loader and not Kit Kat boot loader.

Wheels564 said:
If you have JBBL you can use the TWRP from the link to androidfilehost. It's specifically made for the xt926 but only if you have jelly bean boot loader and not Kit Kat boot loader.
Click to expand...
Click to collapse
I have a jbbl. But can I directly install the image file while in the TWRP that I currently have which is the jbbl for the 907 version 3.1.1 or do I have to side load it again. Sorry for the basic questions i am a novice.

Wheels564 said:
Just compiled a new recovery. Check and see if thats what you want. My main computer is compiling a rom right now.
Click to expand...
Click to collapse
I don't have the ahd available right now, its in a box somewhere, but i will test as soon as i can. I can still look at it by decompiling the img though.
If you grab up omni's android_bootable_recovery and replace it with what you have in your local directory, it should work. For fun, i've taken out my old droid x and did a swap like that and it worked. Like i said, just passing along some ideas/advice.

yoshkapundrick said:
I have a jbbl. But can I directly install the image file while in the TWRP that I currently have which is the jbbl for the 907 version 3.1.1 or do I have to side load it again. Sorry for the basic questions i am a novice.
Click to expand...
Click to collapse
Unless you change recovery to the xt926_jbbl version you will get error 7. Recovery is looking for the assert line in the rom zip file which prevents people from flashing the wrong rom. There's plenty of threads here that guide you how to flash recovery. Once you flash recovery and rom your phone will show as Razr HD and screen resolution will be correct. Also HDMI out will work.
Using minimal ADB and Fastboot
Make sure recovery image is in adb and fastboot folder
1. Rename twrp image to recovery.img
2. "Adb reboot bootloader"
3. "fastboot flash recovery recovery.img
4. "fastboot reboot"
Leave out quotes

yoshkapundrick said:
I have a jbbl. But can I directly install the image file while in the TWRP that I currently have which is the jbbl for the 907 version 3.1.1 or do I have to side load it again. Sorry for the basic questions i am a novice.
Click to expand...
Click to collapse
OMG OMG can you say TWRP 3.3.1-0 for the xt926_jbbl and xt907_jbbl? You were right!! New life for these old devices? I made one to test on the xt907. I did a backup and all seems well. I'll try the version for the xt926 when i get off work and post it on androidfilehost. Kudos

Wheels564 said:
OMG OMG can you say TWRP 3.3.1-0 for the xt926_jbbl and xt907_jbbl? You were right!! New life for these old devices? I made one to test on the xt907. I did a backup and all seems well. I'll try the version for the xt926 when i get off work and post it on androidfilehost. Kudos
Click to expand...
Click to collapse
Would a comparison to Lazarus be inappropriate on XDA LOL ?

twrp3.3.1.0 xt926_jbbl
Recovery "twrp3.3.1.0 xt926_jbbl wheels564" is up on androidfilehost.
Recovery here: https://www.androidfilehost.com/?fid=4349826312261727895

Flashed the TWRP image directly over my JBBL for xt907 version 3.1.1 with no problems. Then flashed rom and similarly no problems.
---------- Post added at 11:37 PM ---------- Previous post was at 10:38 PM ----------
Minor point, camera a no go using open camera and other camera apps.

yoshkapundrick said:
Flashed the TWRP image directly over my JBBL for xt907 version 3.1.1 with no problems. Then flashed rom and similarly no problems.
---------- Post added at 11:37 PM ---------- Previous post was at 10:38 PM ----------
Minor point, camera a no go using open camera and other camera apps.
Click to expand...
Click to collapse
Your right, I'll have to find out where it went. It's still on the Feb 06 version (Jan 5 security patch date)

I must say that your rom is very nimble like DiamondJohn's roms. It is a very big deal when you are dealing with 1GB of ram.
I have other old devices (like a Motorola Xoom) with custom roms that are problematic with 1GB of ram.
Thank you very much

New build up
lineage-14.1-20200222-UNOFFICIAL-xt926_jbbl
Link: https://www.androidfilehost.com/?fid=4349826312261729680
Changelog:
Added missing camera wrapper
Clean flash only, dirty flash will not restore missing camera app.

If you use Open Camera a dirty flash does restore it's functionality.

New build up
lineage-14.1-20200226-UNOFFICIAL-xt926_jbbl
Changelog:
NFC fixes
Link: https://www.androidfilehost.com/?fid=4349826312261732779

[Unofficial] [SODP] Lineage 15.1 for Xperia XZ [EOL]

Lineage 15.1 for Xperia XZ
Based on SODP
By Sjll
This is a stable and performance version​
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Gcam recommend: MGC_6.1.009_MI8_A8.1+_V0_2.apk
For dual model
Add this in build.prop
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,1
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26

2. Flash oem in SW
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T

toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-kagura-oem-to-vendor.img---------> https://sx.ix5.org/files/builds/kagura/misc/twrp-kagura-oem-to-vendor.img ....Use this TWRP , it will solve your " Failed to mount ´/oem´ " problem!
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .img
5. In TWRP --> flash --->zip rom.
6. reboot.
7. Optional (you can install Magisk https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip) to uninstall Magisk --> https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
İf you have never done such thing before! Research for more info.
Thanks to Sjll.

toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
elm_bacchus said:
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-3.3.1-0-kagura.img
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
5. In TWRP --> flash --->zip rom.
6. reboot.
7. İf you have never done such thing before! Research for more info.
Click to expand...
Click to collapse
Unzip it，you need to flash IMG in this zip file.

Sjll said:
Lineage 15.1 for Xperia XZ
Based on SODP​By Sjll
This is a stable and performance version
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26
Click to expand...
Click to collapse
Good project can you up until lineages 16.0 for XZ?

Do I have to first install Oreo base firmware ROM. Latest .192?

Working on it
Sjll said:
Unzip it，you need to flash IMG in this zip file.
Click to expand...
Click to collapse
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it，you need to flash IMG in this zip file
Thanks
T

delete

wich gapps is recomended? or there is a specific one that works?

caqo71 said:
Do I have to first install Oreo base firmware ROM. Latest .192?
Click to expand...
Click to collapse
Yup.
seyrarms said:
Good project can you up until lineages 16.0 for XZ?
Click to expand...
Click to collapse
Need time.
toxypoxy said:
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it，you need to flash IMG in this zip file
Thanks
T
Click to expand...
Click to collapse
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.

Sjll said:
Yup.
Need time.
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.
Click to expand...
Click to collapse
Thanks you my hope

SONY Xperia XZ
Quote:
Originally Posted by Sjll
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.[/QUOTE]
Thank you and elm_bacchus again for the help
Well well this all went well, most of my time went in to trying to flash the wrong TWRP for XZ but after that, it worked in my second attempt :good:
After flashing the SW binaries and format data I got this message again in TWRP : Failed to mount ´/oem in red letters. But I just continued flashing the ROM in TWRP and it worked like a charm.
Kind regards
T

@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...

Thanks for this. I followed the instructions and it worked.
I forgot that my SDcard was encrypted and lost my photos but hey ho.
@Sjll is there a git repository for this ROM ?

2faraway2 said:
@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...
Click to expand...
Click to collapse
Hello
I used twrp-3.3.1-0-kagura and it worked for me.
Regards
T

How about front camera? Does it work properly?

dawidcx3 said:
How about front camera? Does it work properly?
Click to expand...
Click to collapse
It works for me on the F8331 device.

XZs build (keyaki)?
By chance is there a choice for 15.1 for Keyaki? It is stated to choose Kagura, are there other choices for the XZ variants? Would like to update to 8.1, 9, or 10 binaries and read the build instructions from source for Lineage but am wondering if all I need are the kernel binaries to complie Lineage (15.1, 16, 17, 17.1) for the XZS. There is practically nothing for the XZS and it would be helpful to know how to provide other roms for it as well. Any assistance will be greatly appreciated.

Does anyone know what the latest Android security update supported is on this ROM?

Some bugs
Hello, I've been using as my daily for a week now and I've noticed some bugs
1) the camera works but it's bad not even close to stock. The picture is dark and dim.
2) sometimes the wifi doesn't open or close no matter how much you try only restarting the phone helps.
3)sometimes the phone doesn't charge even when it's showing charging.
I hope these bugs can be solved asap because I love this rom its stable, smooth and fast with good battery life. Thanks.