Database Develop

Safestrap Flashable HDX Stock Images

*************************************************************
INCORRECT USE OF THESE FILES WILL BRICK YOUR DEVICE
PLEASE ENSURE YOU KNOW WHAT YOU ARE DOING AND
I AM NOT RESPONSIBLE IF ANYTHING GOES WRONG
*************************************************************
Here you can find stock firmware for both thor and apollo devices which are safestrap flashable.
Please note the following:
- These updates do NOT flash a new kernel or recovery - only a new /system image
- Before flashing ensure you know which stock base/kernel/safestrap you have installed and choose the appropriate version for that stock base/kernel.
- Do NOT use these images to downgrade or upgrade your base firmware.
I will be uploading them as and when I have time.
Thor Images:
- 13.3.1.0 <- Flashable on Safestrap 3.7.2
- 13.3.2.6 <- Flashable on Safestrap 3.7.5
*** THESE ONES DO NOT HAVE ROOT OR BLOCK UPDATES ***
- 13.4.5.2 <- Flashable on Safestrap v4.0.1
Apollo Images:
- 14.3.1.0 <- Flashable on Safestrap 3.7.2
- 14.3.2.6 <- Flashable on Safestrap 3.7.5
*** THESE ONES DO NOT HAVE ROOT OR BLOCK UPDATES ***
- 14.3.2.8 <- Flashable on Safestrap v3.7.5
- 14.4.5.2 <- Flashable on Safestrap v4.0.1
If you want to re-enable over the air updates then do the following:
- Skip this if you are using the 4.5.2 files - As stated above this does not apply so be careful.
- rename /system/etc/security/otacert.old to otacert.zip
- rename /system/app/com.amazon.dcp.old to com.amazon.dcp.apk

ggow said:
Hi All,
Here you can find stock firmware for both thor and apollo devices which are safestrap flashable.
Please note the following:
- These updates do NOT flash a new kernel or recovery - only a new /system image
- Before flashing ensure you know which stock base/kernel/safestrap you have installed and choose the appropriate version for that stock base/kernel.
I will be uploading them as and when I have time.
Thor Images:
- 13.3.1.0
Apollo Images:
- 14.3.1.0
If you want to re-enable over the air updates then do the following:
- rename /system/etc/security/otacert.old to otacert.zip
- rename /system/app/com.amazon.dcp.old to com.amazon.dcp.apk
Click to expand...
Click to collapse
Excellent! I am able to revert back to this stock firmware after nearly bricking my device. Thank you!!

Since I"m heavily tied into the Amazon ecosystem and have other Kindle devices, installing HDX Nexus 2.01 didn't work for me.
However, thanks to @ggow, using the same upgrade guide, Iwas able to get my 3.1.0 to 3.2.6, allowing my fire hdx devices to finally be able to do screen sharing with my fire TVs! I did have to restore /data, enable xposed + hdxposed, re-install kindlefree + Google play store APKs & stucks wallpaper fix to be back at 100%...

Will you make a pre rooted 4.5.1 image for the HDX 7.0 Thor?
Can I flash this over a Stock 4.5.1 device?

D0ubl3_X said:
Will you make a pre rooted 4.5.1 image for the HDX 7.0 Thor?
Can I flash this over a Stock 4.5.1 device?
Click to expand...
Click to collapse
As of right now, it's impossible to root 4.5.1.
No, you can't flash them over a newer version just like that. If you want to downgrade, check this thread.

Hey @ggow, would it be possible for you to release a rooted 14.3.2.6?

_Alex_ said:
Hey @ggow, would it be possible for you to release a rooted 14.3.2.6?
Click to expand...
Click to collapse
Hi _Alex_, yes I'll sort one out for you.
ggow

I goofed - flashed the apollo zip over my already properly up(down)graded stock. Now of course I get a blank screen when trying to boot the stock - not that I do it that often of course. I can still get into safestrap and boot the nexus 2.01 rom with no issues so am okay for now. Would I need something like a rooted 14.3.2.6 to fix this?

aren't these roms very old? Is there any way to get the latest AMAZON STOCK apps AND keep root? I really like the FIRE OS (way more than stock Android) but I also want all apps etc.

_Alex_ said:
Since I"m heavily tied into the Amazon ecosystem and have other Kindle devices, installing HDX Nexus 2.01 didn't work for me.
However, thanks to @ggow, using the same upgrade guide, Iwas able to get my 3.1.0 to 3.2.6, allowing my fire hdx devices to finally be able to do screen sharing with my fire TVs! I did have to restore /data, enable xposed + hdxposed, re-install kindlefree + Google play store APKs & stucks wallpaper fix to be back at 100%...
Click to expand...
Click to collapse
Was screen sharing to Fire TV not available on 13.3.2.3.2? Furthermore, what exactly does 13.3.2.6 offer that's new/improved? Does anyone have the changelog for this?

OK, so the LATEST FIRE OS Version that is rootable is "13.3.2.6" for the THOR device, is that correct? Or is there any other way to root a newer OS Version?´
Oh, and how can I flash this update? My device is rooted, but I have a very old OS Version on my kindle hdx.

Hey guys.. I screwed up.
I have a fire hdx Apollo that had been properly up(down)graded and running fine with 2.01. For some reason (and my lack of understanding the correct versions of things) I thought it would be a good idea to install the Apollo update on my stock rom. This of course has now caused boot loops on my stock boot but not my 2.01 boot.
Would love to be able to restore the stock as I do use some of the fire's capabilities from time to time. Sadly I did not do a backup before the update (kicks self furiously).
I DO have a backup from before the upgrade/downgrade so maybe I could restore that then push through the upgrade steps again or something. I'm worried that I will bork my safestrap or do something worse based on my proclivity for damage and chaos.
E.

_Alex_ said:
Hey @ggow, would it be possible for you to release a rooted 14.3.2.6?
Click to expand...
Click to collapse
Hi _Alex_,
Sorry about the long wait, I have posted a zip for 14.3.2.6. See OP.

Hey @ggow,
Thanks for your hard work. Could you possibly make an image for 13.3.2.4 (Thor)? It would be nice to have along with Nexus HDX 2.0.2.

NextDroid said:
Hey @ggow,
Thanks for your hard work. Could you possibly make an image for 13.3.2.4 (Thor)? It would be nice to have along with Nexus HDX 2.0.2.
Click to expand...
Click to collapse
Yes, I'll sort one out for you. Let you know when its up.
Sent from my Nexus 6 using Tapatalk

Looks like we're going to need it with the new bootloader bypass!
Just to clarify because someone asked, users of the HDX Nexus ROM would need it to downgrade to a firmware that the unlock works on.

ggow said:
Yes, I'll sort one out for you. Let you know when its up.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you!
Sent from my device

recreated the error with the Symlink. Crossposting from the TWRP Thor thread
Wiped system manually
The error log is:
Code:
Wiping system...
Symlinking...
symlink: some symlinks failed
[COLOR="Red"]E: Error executing updater binary in zip '/sdcard/TWRP13.3.1.0.zip'[/COLOR]
Error flashing zip '/sdcard/TWRP13.3.1.0.zip'
Updating partition details
Interesting... Getting the same error when I try to flash the original HDX 13.3.2.3 firmware, after I renamed it from .bin to .zip

Hi @ggow !
I made a flashable zip of the 4.5.2 update for Thor which is compatible with the signing exploit (bootloader/fw flashing removed and modified bootimage with happened dt) as there was some demand.
I'm not sure i should again create a thread for this rom(s) as we may be easily lost. Maybe all our "stock/modified stocks" roms should be in the same thread. What do you think about this ? Here is the link in case : http://android.mydedibox.fr/hdx/update-kindle-13.4.5.2_user_452004120-twrp.zip
Note that i only renamed "otacert.zip" to "otacert.old" on this rom as the "dcp" apk name has changed and i don't remember how i fixed that ... so ota updates may still be enabled isnt it ?
---------- Post added at 03:21 PM ---------- Previous post was at 03:16 PM ----------
aquaphun said:
recreated the error with the Symlink. Crossposting from the TWRP Thor thread
Wiped system manually
The error log is:
Code:
Wiping system...
Symlinking...
symlink: some symlinks failed
[COLOR="Red"]E: Error executing updater binary in zip '/sdcard/TWRP13.3.1.0.zip'[/COLOR]
Error flashing zip '/sdcard/TWRP13.3.1.0.zip'
Updating partition details
Interesting... Getting the same error when I try to flash the original HDX 13.3.2.3 firmware, after I renamed it from .bin to .zip
Click to expand...
Click to collapse
I don't know if it's the problem but the appolo recovery is based on an older kernel (3.1.0?) which doesn't have full selinux support. This prevented some zip to be properly flashed (at least on thor) until i use the 4.5.2 kernel sources. Unfortunately we will have to wait for @ggow to receive his new device, in the hope of an exploitable one (but this may be a different problem)
Edit : oups, you are on thor so it's not the problem !

Cpasjuste said:
Hi @ggow !
I made a flashable zip of the 4.5.2 update for Thor which is compatible with the signing exploit (bootloader/fw flashing removed and modified bootimage with happened dt) as there was some demand.
I'm not sure i should again create a thread for this rom(s) as we may be easily lost. Maybe all our "stock/modified stocks" roms should be in the same thread. What do you think about this ? Here is the link in case : http://android.mydedibox.fr/hdx/update-kindle-13.4.5.2_user_452004120-twrp.zip
Note that i only renamed "otacert.zip" to "otacert.old" on this rom as the "dcp" apk name has changed and i don't remember how i fixed that ... so ota updates may still be enabled isnt it ?
---------- Post added at 03:21 PM ---------- Previous post was at 03:16 PM ----------
I don't know if it's the problem but the appolo recovery is based on an older kernel (3.1.0?) which doesn't have full selinux support. This prevented some zip to be properly flashed (at least on thor) until i use the 4.5.2 kernel sources. Unfortunately we will have to wait for @ggow to receive his new device, in the hope of an exploitable one (but this may be a different problem)
Edit : oups, you are on thor so it's not the problem !
Click to expand...
Click to collapse
Hi @Cpasjuste,
Yes that's fine, I'll put your 4.5.2 image up on the same thread - no point replicating things
On 4.5.2 I wasn't sure which services needed to be disabled to prevent OTA. I'll add a note for this file to warn people to be careful when using it.

[Stock][Lollipop 5.0.2][Root & Recovery][LB/UB] D6502/03 23.1.A.1.28 | Complete Guide

[Stock][Lollipop 5.0.2][Root & Recovery][LB/UB] D6502/03 23.1.A.1.28 | Complete Guide
Dear friends,
As​I have already given the complete guide and necessary files to install the pre rooted Lollipop 5.0.2 with the build number 23.1.A.0.726 for both the D6502/6503 variants, now I'm here with the pre rooted latest release of 5.0.2 Lollipop with build number, 23.1.A.1.28
For those who who don't know about the previous post with the pre rooted lollipop of 23.1.A.0.726 for D6502/6503 variants installation guide, can go through this link.
This method is for both Locked and Unlocked Bootloaders . It includes root and XZDual recovery 2.8.15
Requirements
Download the proper flashable zip from below links.
1. Flashable zip of 23.1.A.1.28 for D6502 variant
2. Flashable zip of 23.1.A.1.28 for D6503 variant
Steps to install pre rooted 23.1.A.1.28 firmware.
1. Download the proper D6502/6503 flashable zip from the link given above.
2. Copy the flashable zip into external sd card.
3. Boot your phone into recovery (TWRP is recommended)
4. Flash the zip.
5. Clear Cache/Dalvik and reboot!
6. The first boot may take some time. (No need to flash ftf for kernel. This time I have included the kernel with the zip itself)
That's all!! check your root with this application from playstore. Its a free application only. (Credits to the developers)
Steps for those Non rooted users
It doesn't matter, whether you are in .726 or .28 firmware. All you need is just follow all the steps given below.
1. First goto this thread.
2. Download the first five files from that thread.
3. Follow upto the 19th step.
3.1 Among that 19 steps, the 5th step needs a modification.​
5. Copy the flashable.zip to your external sd card and remember the location, where its been copied. And, Switch off your phone​
Here you have to copy the above given 23.1.A.1.28 flashable zip.​4. After the 19th step, just flash the flashable_65XX_23.1.A.1.28.zip file. (XX refers your variant i.e. 6502/6503)
5. Clear Cache/Dalvik.
6. Reboot the phone.
Congrats!! you have installed the pre rooted Lollipop 5.0.2 with the build number 23.1.A.1.28 for your Xperia Z2, D6502/6503.

The complete guide for root your Xperia Z2 with the newest firmware lollipop 5.1.1 (23.4.A.0.546) is available in this thread.
--->http://forum.xda-developers.com/xperia-z2.......................post62160595#post62160595<---

[Reserved again]

Hi,
Think your work is great. Could you make a download link that is not google drive as the downloads seem to be problematic.
Thanks

Thanks for this rooted zip!
I was lazy to make one

I'm on . 690. With root and not recovery. Can i install recovery via installer and flash this rom?

Hey which region is this rom? I'm looking for the US Version do you know where I can find it or if you have it, I don't like the 4G icon and it is not merged with the bars
---------- Post added at 07:49 PM ---------- Previous post was at 07:45 PM ----------
Jordamo said:
I'm on . 690. With root and not recovery. Can i install recovery via installer and flash this rom?
Click to expand...
Click to collapse
Yep, if you are already rooted you just need to install custom recovery and then flashed this one that is already pre rooted and that has recovery already. To install recovery in an easy way you just need to download XZ Recovery apk you just need to tap intall recovery and if everything goes right it will reboot into recovery, remember that after you flash the rom you need to wipe dalvik and cache.

Thanks
Flashable zip of 23.1.A.1.28 for D6502 variant which region. Another question, if I flashed the zip, would my data and config and all stuff remain untouched?

very good
thanx it works :fingers-crossed: also make sure to check the APPSLOG, CACHE and DATA under wipe section on step 8 or bootloop will happen (it did for me)

waiting for this version everyday. Thanks

xposed
xposed working ?? no bootloop ??

It actually works on unlocked BL's

FERAS ALHALLAK said:
xposed working ?? no bootloop ??
Click to expand...
Click to collapse
after update to .28 xposed doesnt work anymore, b4 the update my eposed version is alpha4

@arul20be
What is the source country region of zip files?
tnx..

mic747eal said:
after update to .28 xposed doesnt work anymore, b4 the update my eposed version is alpha4
Click to expand...
Click to collapse
@mic747eal and @FERAS ALHALLAK, I'm using .28 and xposed is working normal as before. No issues, all my previous modules are all also still working.
On UB.

Jordamo said:
I'm on . 690. With root and not recovery. Can i install recovery via installer and flash this rom?
Click to expand...
Click to collapse
As far as I know, the .690 doesn't have a recovery.

jakir7 said:
Hi,
Think your work is great. Could you make a download link that is not google drive as the downloads seem to be problematic.
Thanks
Click to expand...
Click to collapse
Anyone with mirrors are welcome!!

sublinker said:
@mic747eal and @FERAS ALHALLAK, I'm using .28 and xposed is working normal as before. No issues, all my previous modules are all also still working.
On UB.
Click to expand...
Click to collapse
hi, after u update to .28 u reinstall the xposed ? mine was after the update, when i open the xposed app. there is the red word saying not active

tatomolina11 said:
Hey which region is this rom? I'm looking for the US Version do you know where I can find it or if you have it, I don't like the 4G icon and it is not merged with the bars
This one is based on Australia.
Click to expand...
Click to collapse

karim-ps said:
Thanks
Flashable zip of 23.1.A.1.28 for D6502 variant which region. Another question, if I flashed the zip, would my data and config and all stuff remain untouched?
Click to expand...
Click to collapse
The D6502 is based on Indian customization. And don't worry. Nothing will be changed. Everything remains solid.

Anyone know what's in the Verizon Update pushed on 4/12? OTA XT1096

I'm wondering if it's worth it. Version 23.201.2.en.us

I'm not sure, but here it is:
https://dl.dropboxusercontent.com/u/12873062/Blur_Version.23.201.2.victara_verizon.verizon.en.US.zip
Is there a way to flash this onto a rooted phone? I unlocked my XT1096 a couple of months ago and installed Teamwin then flashed SuperSU.

I need some help on this too. I heard it's just a security update but it fails for me because I'm rooted and deleted a bunch of apps. Is there any way to take the OTA update?

dunderball said:
I need some help on this too. I heard it's just a security update but it fails for me because I'm rooted and deleted a bunch of apps. Is there any way to take the OTA update?
Click to expand...
Click to collapse
To take the ota you have to reflash the full 5.1 firmware for verizon.
You can't have root nor a modified sytem for OTAs to work. So you need back all those apps you removed and get rid of root.
Sent from my XT1095 using Tapatalk

jonnythan said:
I'm not sure, but here it is:
https://dl.dropboxusercontent.com/u/12873062/Blur_Version.23.201.2.victara_verizon.verizon.en.US.zip
Is there a way to flash this onto a rooted phone? I unlocked my XT1096 a couple of months ago and installed Teamwin then flashed SuperSU.
Click to expand...
Click to collapse
dunderball said:
I need some help on this too. I heard it's just a security update but it fails for me because I'm rooted and deleted a bunch of apps. Is there any way to take the OTA update?
Click to expand...
Click to collapse
I've put together a debloated TWRP flashable version. It's here: http://forum.xda-developers.com/showpost.php?p=66354183&postcount=1057
Please review the first post in that thread as the ROM is partially debloated and has SuperSU and Xposed pre-installed. GApps have been removed and you need to install your own. It is possible with the files posted to have a full stock install but you'll need the instructions from that thread to accomplish that.

mikeoswego said:
I've put together a debloated TWRP flashable version. It's here: http://forum.xda-developers.com/showpost.php?p=66354183&postcount=1057
Click to expand...
Click to collapse
Which of these files would I want to flash, if I'm running stock firmware (rooted with SuperSU flashed)? The update from Verizon is ~20 MB, but you have a 30MB modem firmware and 398K bootloader.

jonnythan said:
Which of these files would I want to flash, if I'm running stock firmware (rooted with SuperSU flashed)? The update from Verizon is ~20 MB, but you have a 30MB modem firmware and 398K bootloader.
Click to expand...
Click to collapse
Ok, those files are for the stock based rom that I maintain. You need to read the first post in that thread to understand what it is. SuperSU and Xposed are preinstalled, GApps are removed and you have to install your own. If you want a full stock install, that is also possible with the files posted, it's all explained there.
The file sizes are different because the Verizon patch has some full files like gpt.bin and fsg.mbm but the rest is just small patches to apply to the exisiting files. The first thing the Verizon patch does is check that you have the correct original files and if not, it aborts; you can't apply the patch if you've modified system by installing SuperSU, etc. My patches have the gpt.bin update seperate for ease of putting the files together, the firmware has the fsg.mbm file from the Verizon patch and then the full modem partition from my phone after applying the patch instead of just the patch files. That way the patches can be applied no matter what is on your phone now but they are much larger files.

mikeoswego said:
Ok, those files are for the stock based rom that I maintain. You need to read the first post in that thread to understand what it is. SuperSU and Xposed are preinstalled, GApps are removed and you have to install your own. If you want a full stock install, that is also possible with the files posted, it's all explained there.
The file sizes are different because the Verizon patch has some full files like gpt.bin and fsg.mbm but the rest is just small patches to apply to the exisiting files. The first thing the Verizon patch does is check that you have the correct original files and if not, it aborts; you can't apply the patch if you've modified system by installing SuperSU, etc. My patches have the gpt.bin update seperate for ease of putting the files together, the firmware has the fsg.mbm file from the Verizon patch and then the full modem partition from my phone after applying the patch instead of just the patch files. That way the patches can be applied no matter what is on your phone now but they are much larger files.
Click to expand...
Click to collapse
Thanks mikeoswego. I flashed the two smaller files you provided using TWRP. Are those the only 2 zip files I need? I didn't see anything specific to a kernel or anything.
I am on rooted stock rom where I deleted a bunch of apps I didn't want.
---------- Post added at 04:09 PM ---------- Previous post was at 03:58 PM ----------
dunderball said:
Thanks mikeoswego. I flashed the two smaller files you provided using TWRP. Are those the only 2 zip files I need? I didn't see anything specific to a kernel or anything.
I am on rooted stock rom where I deleted a bunch of apps I didn't want.
Click to expand...
Click to collapse
It turns out that when I flash the two .zip files, my Moto X still thinks there is a system update available. Is there something else I'm supposed to flash?

mikeoswego said:
Ok, those files are for the stock based rom that I maintain. You need to read the first post in that thread to understand what it is. SuperSU and Xposed are preinstalled, GApps are removed and you have to install your own. If you want a full stock install, that is also possible with the files posted, it's all explained there.
The file sizes are different because the Verizon patch has some full files like gpt.bin and fsg.mbm but the rest is just small patches to apply to the exisiting files. The first thing the Verizon patch does is check that you have the correct original files and if not, it aborts; you can't apply the patch if you've modified system by installing SuperSU, etc. My patches have the gpt.bin update seperate for ease of putting the files together, the firmware has the fsg.mbm file from the Verizon patch and then the full modem partition from my phone after applying the patch instead of just the patch files. That way the patches can be applied no matter what is on your phone now but they are much larger files.
Click to expand...
Click to collapse
Thanks.. it doesn't seem like I can install just the update. I'd need to flash the whole ROM. Correct?

dunderball said:
Thanks mikeoswego. I flashed the two smaller files you provided using TWRP. Are those the only 2 zip files I need? I didn't see anything specific to a kernel or anything.
I am on rooted stock rom where I deleted a bunch of apps I didn't want.
---------- Post added at 04:09 PM ---------- Previous post was at 03:58 PM ----------
It turns out that when I flash the two .zip files, my Moto X still thinks there is a system update available. Is there something else I'm supposed to flash?
Click to expand...
Click to collapse
jonnythan said:
Thanks.. it doesn't seem like I can install just the update. I'd need to flash the whole ROM. Correct?
Click to expand...
Click to collapse
The two smaller zips are the bootloader and modem firmware, the rom and kernel are in the xt1096-5.1-23.32-25-5-2_1.zip file. You could extract the boot.img file from the zip and flash it with fastboot. If you want the full ROM and want to flash SuperSU yourself and remove whatever bloat yourself, then use xt1096-full-stock-23.32-25-5-2.img.7z file; you can flash the image file within that archive with current versions of fastboot. (Or, using 7zip, you could delete the system.img file from xt1096-5.1-23.32-25-5-2_1.zip then rename the .img file in xt1096-full-stock-23.32-25-5-2.img.7z to system.img and place it in xt1096-5.1-23.32-25-5-2_1.zip. Then you would TWRP flash that, it would update your kernel (boot.img) and install the system partition just as if you took the OTA on the stock system.) Like AGISCI said above, the only way to use the OTA directly is on an unmodified stock system.

Forgive me, I'm not really following you. I don't know what's in the OTA exactly. Is there anything in your post that I can flash that will update my system to the latest version without wiping everything and starting from scratch?

jonnythan said:
Forgive me, I'm not really following you. I don't know what's in the OTA exactly. Is there anything in your post that I can flash that will update my system to the latest version without wiping everything and starting from scratch?
Click to expand...
Click to collapse
You must flash the full firmware like was mentioned earlier. It is impossible to do the update with a modified system.
Sent from my XT1095 using Tapatalk

I'm wondering if there is a way to not take the update. I keep getting a nag message about installing the update and I keep pushing reminder out to a new time.
A little background. I have a XT1096 (Verizon version) and unlocked the bootloader and rooted. I also nuked a bunch of bloatware so there is no way that a OTA update will install. I'm not sure that I really want to go back to stock and start over.

I flashed the system .img file and it just updated my system without wiping anything. Seems to be working fine, but I had to reflash SuperSU.

desertcat said:
I'm wondering if there is a way to not take the update. I keep getting a nag message about installing the update and I keep pushing reminder out to a new time.
A little background. I have a XT1096 (Verizon version) and unlocked the bootloader and rooted. I also nuked a bunch of bloatware so there is no way that a OTA update will install. I'm not sure that I really want to go back to stock and start over.
Click to expand...
Click to collapse
I found a way to not take the update. Use your favorite applications manager for root to freeze MotorolaOTA and the update won't be downloaded and you won't get messages about installing the update.

desertcat said:
I found a way to not take the update. Use your favorite applications manager for root to freeze MotorolaOTA and the update won't be downloaded and you won't get messages about installing the update.
Click to expand...
Click to collapse
THANK YOU!!! After being stuck on vacation for a week with this !#@[email protected]#$ update bugging me to install it every couple of minutes this fix stopped the problem.

[Z2Pro] Zui 2.5.462 OTA (Nougat) full rom+firmware update (Magisk+Xposed work !)

Hi !
This is a backup of the latest OTA of ZUI by Zuk/Lenovo, already configured in english, chineses apps uninstalled, and playstore/google services installed.
Magisk root and unofficial Xposed-Magisk for Nougat work on this rom !
(I've tested Youtube Adaway, Youtube background, Lucky Patcher, Adblocker reborn, it's working well)
Your not need to do a wipe, and you can keep your data if you come to 2.5.435 ZUI rom ! But you have obligation to install boot & firmware, because latest OTA by zuk upgrade both !
[Quick Charge is disabled by default when the screen is on, look the screen capture, it's normal, this is a new setting come with this latest OTA, you can change that on developper settings ! ]
Link to download (hosted on my own webserver) : http://osremix.com/share/ZUI_2.5.462_ST_Clean_Android_7.0-TWRP_3.1.0.0_z2pro_2121.7z
MD5sum : dc9865f17bcfcdb141e0bf34f9612d0a
Magisk 13.3 (update to the latest APK when the apps purpose it to you) : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Latest Xposed for Magisk (SDK24/Android 7.0) : http://main.purifyos.it/xposed/magisk/SDK24/
Xposed manager APK : https://forum.xda-developers.com/devdb/project/?id=13191#downloads
​

The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?

Is there any chance of multilanguage for this rom?

Bryandu13 said:
The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?
Click to expand...
Click to collapse
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
Billkaza said:
Is there any chance of multilanguage for this rom?
Click to expand...
Click to collapse
I don't know how to merge XML translation into rom, sorry.

After receiving OTA update to 462 ST, SOT is reduced to 4 hours of moderate usage (usually 5-6 hours).. Phone temperature is a bit warmer, standby temp usally 27 C, now is 32 C, charging temp is around 37 C.. It's a thin phone, you can feel when the temperature is going up..

Is the OTA update works in this rom? In System Update app I have info: "Your system has been root, we are unable to provide the latest version of the system"

ZUI OTA doesn't support unlocked bootloader, rooted or not the phone just shows this message when the bootloader is unlocked...

Hello, someone has already gained some experience about this Rom, is there anything you should know? Thank you

Anyone can help making this rom multilanguage?

Is francko76 the only one who can help us, or can anyone ask the creator of AEX?

how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?

xxjahasotoxx said:
how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?
Click to expand...
Click to collapse
how to install?

Giovanni Bruno said:
how to install?
Click to expand...
Click to collapse
If you're asking his to install this I made a backup of my current stock rom, and then looked in my files for the name of the backup that I made and put the twrp files folder in the same folder that the backup was in, after that just go to twrp and select restore and select twrp files as your restore
Edit 1: so apperantly I can make calls and receive them but I can't hear anyone and they can't hear me
Any ideas as to what I should try?

we can add any languag by morelocal2 app
in play store

would somene post the u-health app in this rom, thanks
camera apk as well plz...
thanks

Now I'd really would try your rom, bitte wherever and wherever I try to download, IT proceeds to 70%,and thats it, nö further progress...

tikilou said:
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
I don't know how to merge XML translation into rom, sorry.
Click to expand...
Click to collapse
How do you install this backup? with TWRP?
We have to put the file in specific directory?

I used your backup to switch successfully from aex 4.5 to stock. Thank you very much.
@tikilou i would like to know how you backed up stock recovery since we restore it with TWRP

jppsousa said:
How do you install this backup? with TWRP?
We have to put the file in specific directory?
Click to expand...
Click to collapse
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp

chtsarts said:
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp
Click to expand...
Click to collapse
I think someone should finaly mention which Partitions should only be restored from a Backup of another user. Keep Radio & imeis in mind guys

[ROM] TWRP Flashable Stock Builds

*FILES REMOVED UNTIL FURTHER NOTICE, AS USERS ARE HAVING CONNECTION ISSUES AFTER FLASHING*
Here are the latest stock retail builds packaged into TWRP flashable format.
You can use these files to upgrade and downgrade stock builds safely, as they do not include gpt (partition table) or bootloader.
Usage is simple:
Copy file to device storage
Reboot into TWRP
Flash zip
Profit!
Please remember to hit the "THANKS" button if these files help you!
NOTES:
Dm-verity and force encryption have been disabled in the boot images, and unlocked device/dm-verity warnings have been disabled in the logo images.
Do NOT attempt to apply standard OTAs over these builds; they will fail.
If you get an OTA for a build that's not yet available, please share it!
How To Pull An OTA update:
Download the update
Power off and boot into TWRP
Go to Advanced > File Manager
Navigate to /cache
There will be a Blur_Version_blah.zip file
Copy to internal storage or sdcard
Copy from internal storage or sdcard to PC (optional, recommended)
Upload to Drive, Mega, or whichever file sharing service you choose
Share the link!
If you're rooted/modded and want to prevent potential auto updating, you can wipe /cache to remove the file.
DOWNLOADS:
CREDITS:
Android
Lenovorola
@tal.aloni for SparseConverter posted here:
https://forum.xda-developers.com/showthread.php?t=2749797
@erfanoabdi for imgpatchtools posted here:
https://forum.xda-developers.com/an...ev-img-patch-tools-sdat2img-ota-zips-t3640308
@A.S._id for img repack tools posted here:
https://forum.xda-developers.com/showthread.php?t=2600364
@xpirt for sdat tools posted here:
https://forum.xda-developers.com/an.../how-to-conver-lollipop-dat-files-to-t2978952

Please tell me these actually work. I am desperate for any ROM for the XT1710-01 variant. I will go as far as paying.

Thank you so much,it works on xt1710-08 well,just backup EFS in trwp just in case of no signal,after flash this rom in twrp,restore EFS and enjoy it.Also,you can root it with flashing magisk

So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Are these 7.1.2 yet?
THANKS

KeepingItCuttingEdge said:
Are these 7.1.2 yet?
Click to expand...
Click to collapse
It's still 7.1.1. See the attached screenshot.

KeepingItCuttingEdge said:
So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Click to expand...
Click to collapse
Any response to these questions, OP?
I am in the same boat.

New builds are up
KeepingItCuttingEdge said:
So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Are these 7.1.2 yet?
THANKS
Click to expand...
Click to collapse
There is no 118-9 version.
pizza_pablo said:
Any response to these questions, OP?
I am in the same boat.
Click to expand...
Click to collapse
There is no 118-9 version.
If I knew, I would answer.
These files are are made from official fastboot files shared by @Junior Passos.
Check out his afh page for albus here: https://androidfilehost.com/?a=show&w=files&flid=195559

Q9Nap said:
New builds are up
There is no 118-9 version.
There is no 118-9 version.
If I knew, I would answer.
These files are are made from official fastboot files shared by @Junior Passos.
Check out his afh page for albus here: https://androidfilehost.com/?a=show&w=files&flid=195559
Click to expand...
Click to collapse
This is from a US unlocked Z2 Play.
The model number is XT1710-01.
Are the listed firmware versions proper for my model?

pizza_pablo said:
This is from a US unlocked Z2 Play.
The model number is XT1710-01.
Are the listed firmware versions proper for my model?
Click to expand...
Click to collapse
Dude, what did I just say? I DON'T KNOW.
I'm sure it will work, but it may take you off your official upgrade path.
And with no fastboot file available for your current software version, I would take a full TWRP backup and copy to pc for safekeeping before trying anything.
Welcome to Flashing 101

Q9Nap said:
*removed*
Due to lack of interest.
Click to expand...
Click to collapse
Noooo, please restore! I've been using the steps and files provided to get rid of the annoying "an update is available" notifications on my rooted XT1710-09!
And yesterday a new one has appeared...

Indeed please restore it can't hurt having it up here

We don't even have custom roms, this is the closest we can get for now. Please post more builds!

Q9Nap said:
*removed*
Due to lack of interest.
Click to expand...
Click to collapse
I'm going to buy my z2 play bike at the end of the year and it's a shame not to have an updated lite rom. Probably you should be doing a good job.
It would be nice to have a rom lite for ALL MODEL with deodex, delete more apps OTA / CCC / CCE, OTA process is deleted, remove a lot of the background services collect and send data on the type of phone (DropBox, MotoCare , MotoConntect, Drive and etc).

ilgrosso said:
Noooo, please restore! I've been using the steps and files provided to get rid of the annoying "an update is available" notifications on my rooted XT1710-09!
And yesterday a new one has appeared...
Click to expand...
Click to collapse
Lars1703 said:
Indeed please restore it can't hurt having it up here
Click to expand...
Click to collapse
f.baio said:
We don't even have custom roms, this is the closest we can get for now. Please post more builds!
Click to expand...
Click to collapse
Guth13 said:
I'm going to buy my z2 play bike at the end of the year and it's a shame not to have an updated lite rom. Probably you should be doing a good job.
It would be nice to have a rom lite for ALL MODEL with deodex, delete more apps OTA / CCC / CCE, OTA process is deleted, remove a lot of the background services collect and send data on the type of phone (DropBox, MotoCare , MotoConntect, Drive and etc).
Click to expand...
Click to collapse
Updated the OP with the latest retail build NPSS26.118-19-11.
Unlike most carrier unlocked moto devices, which tend to have multiple upgrade paths for different regions, the albus seems to have only one upgrade path for the retail variant so far.
Someone correct me if I'm wrong, and please post the OTA files for alternate upgrade paths if you have them; directions are in the OP.
I have linked the tools I use to create these at the bottom of the OP.
You can use these tools and info in their threads to reverse engineer the stock build and modify it to your liking.

Thank you so much now i can have the latest update for my rooted moto thanks a lot

I have an unlocked Moto Z2 Play XT1710-01 and this is the latest update I am seeing:
NPSS26.118-24-6
https://drive.google.com/file/d/1IUG-o0HWCgFGyNwX3aWzd4oqhHAzK25T/view?usp=sharing
EDIT:
I think i now understand the file name structure and that it includes the date. My updated was from 6/26 and your updated was from 11/19. I just updated to the newest. Thank you for doing this!

sirkuttin said:
I have an unlocked Moto Z2 Play XT1710-01 and this is the latest update I am seeing:
NPSS26.118-24-6
https://drive.google.com/file/d/1IUG-o0HWCgFGyNwX3aWzd4oqhHAzK25T/view?usp=sharing
EDIT:
I think i now understand the file name structure and that it includes the date. My updated was from 6/26 and your updated was from 11/19. I just updated to the newest. Thank you for doing this!
Click to expand...
Click to collapse
The file name structure doesn't have anything to do with the date it was made afaik.
That update is for "albus_c" and not "albus". I'm not sure what the difference is.
Apparently, there are multiple upgrade paths after all.
Flashing this will likely take you off your current upgrade path, but it is safe, so you can always go back to your previous stock build if you want.

Q9Nap said:
Updated the OP with the latest retail build NPSS26.118-19-11.
Unlike most carrier unlocked moto devices, which tend to have multiple upgrade paths for different regions, the albus seems to have only one upgrade path for the retail variant so far.
Someone correct me if I'm wrong, and please post the OTA files for alternate upgrade paths if you have them; directions are in the OP.
I have linked the tools I use to create these at the bottom of the OP.
You can use these tools and info in their threads to reverse engineer the stock build and modify it to your liking.
Click to expand...
Click to collapse
Thanks @Q9Nap!
I've attempted to follow your instructions about applying OTA via TWRP, but that fails because of mismatching thumbprint - which sounds odd since I've downloaded and attempted to flash on exactly the same device...
Anyway, I'll try soon to flash the full stock ROM, after download from the link you've re-posted.

New update NOT PATCHED YET NPSS26.118-19-14
https://drive.google.com/file/d/1df6c3cWDU0mxt__mFhL-GiqzQzLWdKrD/view?usp=drivesdk
Contains November security updates
This has not yet been patched please wait for OP to do So

@Q9Nap can you put a tutorial on here telling us how to make a update flashable