Related
DISCLAIMER: DO ON YOUR OWN RISK. Flashing can potentially bricked or bootloop your device
For those who wants AOSP VANILLA NEXUS EXPIRIENCE
This ROM is DEVELOPED by QUALCOM for xiaomi note 3 PRO
for both LOCKED and UNLOCKED bootloader
Info and Download :
Everything is working fine exept FINGERPRINT option not found in SETTINGs
FINGERPRINT SENSOR is detected but no option to manage it
everything else is fine ROOT,exposed,adaway.......
download
FLASHING ROM GUIDE :
Unzip system.zip in the same folder
reboot DEVICE in fastboot mode (Power + volume down)
Open "PROMPT COMMANDS" on the folder (shift + right mouse click)
slide "8976_fastboot_all_images.bat" to the opened "PROMPT COMMANDS"
plug in the DEVICE
press enter
WAIT and DONE
reserved
Perfectdevil said:
how to flash:
1 UNZIP SYSTEM.ZIP
2 MOVE ALL ON THE SAME FOLDER
3 PUT THE PHONE IN FASTBOOT MODE (or EDL mode)
4 OPEN "PROMPT COMMANDS" ON THE FOLDER
5 MOVE "8976_fastboot_all_images.bat" ON PROMPT
4 PLUG IN THE PHONE
5 PUSH ENTER
6 WAIT...
7 ENJOY!!
Click to expand...
Click to collapse
Add credits come on tag me is an clone of my thread (searching and uploading by me....)
http://forum.xda-developers.com/showthread.php?t=3346350
Inviato dal mio kenzo utilizzando Tapatalk
How to flash at locked bootloader, this way does't worked or I'm doing something wrong.
Recovery version here. https://744c9d.lt.yunpan.cn/lk/cqKfQ258rvd8Z
Perfectdevil said:
DISCLAIMER: DO ON YOUR OWN RISK. Flashing can potentially bricked or bootloop your device
For those who wants AOSP VANILLA NEXUS EXPIRIENCE
This ROM is DEVELOPED by QUALCOM for xiaomi note 3 PRO
for both LOCKED and UNLOCKED bootloader
Info and Download :
Everything is working fine exept FINGERPRINT option not found in SETTINGs
FINGERPRINT SENSOR is detected but no option to manage it
everything else is fine ROOT,exposed,adaway.......
download
FLASHING ROM GUIDE :
Unzip system.zip in the same folder
reboot DEVICE in fastboot mode (Power + volume down)
Open "PROMPT COMMANDS" on the folder (shift + right mouse click)
slide "8976_fastboot_all_images.bat" to the opened "PROMPT COMMANDS"
plug in the DEVICE
press enter
WAIT and DONE
Click to expand...
Click to collapse
rom you done this you? Are the source to compile for this phone? because there is no catch rom?
Hi,
This thread is a duplicate of:
> Xiaomi Redmi Note > Redmi Note General > [ROM] Qualcomm Factory ROM - Redmi Note 3 Pro - AOSP
Thread closed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Latest update MIUI-11 here https://forum.xda-developers.com/mi-pad-4-plus/how-to/miui-11-global-china-t3994147/page4 +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++================
Warning:
Backup persist partition
(There are some project that changes your WIFI MAC Address. if it happened you will lost it forever.)
It shows wifi but after entering pwd it shows only saved. Can't connect at all.
-Boot TWRP
-connect your PC with USB
-your computer -Open CMD
cmd>adb shell
cmd>cd /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>ls -l /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>dd if=/dev/block/platform/soc/c0c4000.sdhci/by-name/persist of=/sdcard/persist.img
(keep your persist.img in the safe place)
--------------------------
How to restore it if you have a problem.
(load your persist.img into sdcard.)
cmd>dd if=/sdcard/persist.img of=/dev/block/mmcblk0p48
================================================================
+Update the best MIUI-11 Android 10/Q For MiPad4 Plus
------------------------------------------------------------------------------
++++++++++ A10 MIUI-11 China Beta ++++++++
------------------------------------------------------------------------------
+- Ported from Redmi Note 5 Pro (Redmi Note 5) using Erfan Tool by O Canal High Tech do VegaDados Bobo...
- MIUI 11 CN Beta 9.10.17
- Updated Security Patch: 2019-10-01
- More Debloated
+-install GApps ( ExliteGapps )
+-a little fix error
------------------------------------
Begin
1. Flash Vendor_for_CN_MIU-I11.zip https://mega.nz/#!9OZDFYxT!ZvU3Qlaw4E8oJFaItyi_IdsNRXCvPg7bksQSvtVpLWM
2. Flash System.img [MIUI11-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img]
Download here hurry up https://drive.google.com/file/d/1eqFbi4mou3UxcQkH86y2mcsis2qqdj9h/view
3. Flash "allzygotefix2.zip" https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
4. Flash Magisk latest stable version.
5. Reboot (the fist time boot --hello MIUI 11 CN
Not set wifi --No online during setup android.
6. Enable Developer mode set DPI ( Smallest width about 600 or any ...up to you )
-setup Fingerprint
-make Lock screen shot-cut on home-screen
-setting-->Home Screen Menu
set Swip up on the Home screen to = None
set App vault = Disable
-open wifi
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfEFceOahuBjr4Wcz1S6espGsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-gPqxBn5OQhFY-KdzIxa7L7Hd2S5niK2N8BE
------------
Make CN to EN
7. Install EdXposed
Magisk Manager install below mods
-Riru-Core (Magisk Mod)
-Riru-EdXposed YAHFA (Magisk Mod)
-EdXposedManager.apk
Edxposed Manager -- install below mod
-HiddenCore (com.cofface.ivader) ---xposed mod
-MIUI Anesthetist
More Debloated by yourself
8.Install Root Explorer (Root) or any you like
-Delete System Apps ( forbidden to delete such as..)
/System/app/MiuiSuperMarket
/System/app/Updater
Etc.
-----------------
Optional step for MicroG /NanoDroid User ( Later )
-----------------
9.Next step install Gapps
"ExLiteGApps-10.0_arm64-20191101_v2.3.zip"
https://sourceforge.net/projects/exlitegapps/files/Android 10/Plus-edition/
Note I use 2.3 version for now
Download and flash with TWRP
Reboot you will founded there are Gboard and Play store app already installed.
House keeping
---Fix sound bug .( by install Viper4A)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
-If your launcher starts to flick on startup, flash that: Google Drive
(https://drive.google.com/file/d/1bWCEX4ri5LK1UwMHVxu6t9AJyLlTQ3wB/view?usp=sharing)
Just flash if launcher flicks on first boot
Fix error " Android System: your vendor image does not match the system......."
-edit (system/vendor----> bulid prop)
change line " ro.vendor.build.fingerprint = xxx to ro.build.fingerprint=xxx
and/or
-edit (system ---> bulid prop)
change " ro.treble.enabled=true" to " ro.treble.enabled=false"
- reboot
END
========================================
++++++++++ A9 MIUI-11 Stable +++++++++
========================================
All files
https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
Info.:
Android Version: 9
- Ported from
Brand: xiaomi
Model: Redmi 7
MIUI 11 Global Stable V11.0.3.0
Security Patch: 2019-10-01
Fingerprint: xiaomi/onc_eea/onc:9/PKQ1.181021.001/V11.0.3.0.PFLEUXM:user/release-keys
-Note
- To login into your Google Account, you need to install Google Play Services, after do that, reboot.
Download: Hurry up it will delete soon
https://drive.google.com/file/d/18O4k8RWAcp_NX1HhUnGl1hvalzrtsMYg/view?usp=sharing
TWRP : TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!NTYgnYpR!SghroCrXa9BhT89P3SzOefdBjnSmW2EZ2-gBSTaikqo
Step
1. Flash vendor (_vendor_miui11.zip)
2. Flash System Img (MIUI11-Aonly-VegaDataTests-9-20191025-ErfanGSI.img)
3. Flash permissiver _v4
4. Flash Disable Force Encryption Treble + Magisk
5. Reboot ( Take more times to boot )
6. install google services apk
7. Fix All Sound------------
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfE...GsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-g...7Hd2S5niK2N8BE
[Xiaomi.EU's MIUI 11 (Android Q/10) GSI]
--------------------------------------------------
- Ported from Redmi K20
- MIUI 11 BETA ver. 9.10.17
- Android 10
-- Updated Security Patch: 2019-10-01
- Xiaomi.EU include GAPPS, so, to use Google Play and these things, you need to install Google Play Services
-Download -ARM64 Aonly https://drive.google.com/file/d/19q6lPqGbyDaRdtzhN_dHsDdOkWcXiST8/view?usp=sharing
Step https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
1. Flash vendor ( _vendor-MIUI.EU.zip )
2. Flash System.img ( MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img )
3. Flash allzygotefix2.zip
-flash magisk
4. Reboot --(Take more time to boot at redmi logo)
5. install google services (gms)
6.reboot
7.login google account
8.Fix sound error ( install Viper4A)
9.Enable Developer mode adjust DPI go back to setting set ICon size
===============
----Supported GCam 7
----Tips:
- If you get some visual bugs, try to enable "Disable HW overlays" in Developer Mode
----Work function
DT2C/W
Face unlock
Fingerprint unlock
Full screen display
power boot menu
etc... you will test it
===================================
Very important
You will founded error sound, please install viper4A. ( howto down below)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
5.Fix Sound bug
-Flash Fix Treble Sound https://mega.nz/#!5DoHQIoA!vQStmoPfE...GsDA1NZFRQhLCQ
-New Fix System sound cracked " fixaudiogsi.zip"
https://mega.nz/#!cOZXGarJ!nneoUuB-g...7Hd2S5niK2N8BE
https://sourceforge.net/projects/zjrdroid/files/GSIs/
Remark
ZJRDroid GSIs Updates, [31.10.19 22:51]
Hello everyone, it is with great sadness that I inform you that I am pausing all my work with GSIs, because currently I have no time to GSIs. We will continue to have GSIs, but infrequently.
Thank you for understand. @ZJRDroid
tom.android said:
[Xiaomi.EU's MIUI 11 (Android Q/10) GSI] *****recommend
- Ported from Redmi K20
- MIUI 11 BETA ver. 9.10.17
- Android 10
-- Updated Security Patch: 2019-10-01
- Xiaomi.EU include GAPPS, so, to use Google Play and these things, you need to install Google Play Services
-Download -ARM64 Aonly https://drive.google.com/file/d/19q6lPqGbyDaRdtzhN_dHsDdOkWcXiST8/view?usp=sharing
Step https://mega.nz/#F!AGAkXQYY!LPtbReZSBnZBneCMV8dp8Q
1. Flash vendor ( _vendor-MIUI.EU.zip )
2. Flash System.img ( MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img )
3. Flash allzygotefix2.zip
4. Reboot
5. install google services (gms)
===============
Very important
You will founded error sound, please install viper4A. ( from Magisk' repo --ViPER4Android_FX_Legacy-v4.4.zip) only its driver that we want cause v4a not support Android 10
----Supported GCam 7
----Tips:
- If you get some visual bugs, try to enable "Disable HW overlays" in Developer Mode
----Work function
DT2C/W
Face unlock
Fingerprint unlock
Click to expand...
Click to collapse
Tablet ended in Bootloop with this
Everlite92 said:
Tablet ended in Bootloop with this
Click to expand...
Click to collapse
1.First thing first please install TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!sHoXlaDK!ZIfuRrtl7...diEd-6iQS2YFNg
2.Clean Flash Wipe Advanced ( Davik + cache + data + system + vendor) and Format Data
( Not forgotten to backup your data before )
3.Reboot back to recovery do step to install gsi
Note --- Test with my Mi pad 4 Plus only
tom.android said:
1.First thing first please install TWRP-20191001-3.3.1.0-clover.img = https://mega.nz/#!sHoXlaDK!ZIfuRrtl7...diEd-6iQS2YFNg
2.Clean Flash Wipe Advanced ( Davik + cache + data + system + vendor) and Format Data
( Not forgotten to backup your data before )
3.Reboot back to recovery do step to install gsi
Note --- Test with my Mi pad 4 Plus only
Click to expand...
Click to collapse
Did everything, still bootloops =(
Everlite92 said:
Did everything, still bootloops =(
Click to expand...
Click to collapse
ok please wait I will extract current boot.img,vendor.img from my pad4plus. use twrp flash my boot.img and vendor.img then flash system MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img don't forget to flash allzygotefix2.zip
https://mega.nz/#F!oTZzBKTB!sugkCk_ov7gcfdOuJeGV6g
Android 9 GSI boots up fine, only 10 doesnt want to
---------- Post added at 06:37 AM ---------- Previous post was at 06:15 AM ----------
tom.android said:
ok please wait I will extract current boot.img,vendor.img from my pad4plus. use twrp flash my boot.img and vendor.img then flash system MIUI11-EU-Q-Aonly-VegaDataTests-10-20191017-ErfanGSI.img don't forget to flash allzygotefix2.zip
https://mega.nz/#F!oTZzBKTB!sugkCk_ov7gcfdOuJeGV6g
Click to expand...
Click to collapse
Bootscreen is completly black. normal?
Everlite92 said:
Android 9 GSI boots up fine, only 10 doesnt want to
---------- Post added at 06:37 AM ---------- Previous post was at 06:15 AM ----------
Bootscreen is completly black. normal?
Click to expand...
Click to collapse
no firstboot mi logo then Redmi logo wait (take more time)
tom.android said:
no firstboot mi logo then Redmi logo wait (take more time)
Click to expand...
Click to collapse
Mi Logo appears, but no redmi logo. stays black. will wait longer but for now nothing happens
i hear the windows sound that a device is plugged in but no redmi logo.
Boot in mi pad 4 8"
Brightness no work and imei error id
Great work
Enviado desde mi ZTE A2017X mediante Tapatalk
davidroid1 said:
Boot in mi pad 4 8"
Brightness no work and imei error id
Great work
Enviado desde mi ZTE A2017X mediante Tapatalk
Click to expand...
Click to collapse
try Brightness Fix (mount vendor befor flash)
https://mega.nz/#F!5fBlFYxD!830A7OTeXkVX0jSZ-TfRXw
the twrp mega link is broken... (wrong c/p) "..." in link
here a working link:
TWRP-20191001-3.3.1.0-clover_mokee.img
Everlite92 said:
Mi Logo appears, but no redmi logo. stays black. will wait longer but for now nothing happens
i hear the windows sound that a device is plugged in but no redmi logo.
Click to expand...
Click to collapse
for me too. just a black screen and the windows sounds comes...
(with boot.img and vendor.img)
Mi Logo appears, then black screen, after some time windows sound, that a device was pluggin in
Windows Device Manager Shows: Qualcomm HS-USB Diagnostics 900E
deepblue2000 said:
for me too. just a black screen and the windows sounds comes...
(with boot.img and vendor.img)
Mi Logo appears, then black screen, after some time windows sound, that a device was pluggin in
Windows Device Manager Shows: Qualcomm HS-USB Diagnostics 900E
Click to expand...
Click to collapse
The new GSI's here with Android 10 are ending in blackscreen too. Only Android 9 Miui GSI Seems to work. LOS 17 GSI runs great. Don't get it....
I got it working now... but I have to think about it how I did it...
- first do not install the vendor.img which has @tom.android posted seperated
- I just installed the boot.img
So that the RedMi Logo shows up... there was a reboot loop... I let it as it is.. it rebooted many many times
In the meantime, I built a bathroom cabinet ... then I took a look at the MiPad4Plus, and there was no
reboot loop anymore, but it stuck at the Redmi Logo...
Then I rebooted twrp again, flashed again the rom.img and let it boot... and boot does work now..
but I cant activated cause, the wifi menu was missing, the back to twrp and installed allzygotefix2.zip again.
now wifi works and I could activate it...
deepblue2000 said:
I got it working now... but I have to think about it how I did it...
- first do not install the vendor.img which has @tom.android posted seperated
- I just installed the boot.img
So that the RedMi Logo shows up... there was a reboot loop... I let it as it is.. it rebooted many many times
In the meantime, I built a bathroom cabinet ... then I took a look at the MiPad4Plus, and there was no
reboot loop anymore, but it stuck at the Redmi Logo...
Then I rebooted twrp again, flashed again the rom.img and let it boot... and boot does work now..
but I cant activated cause, the wifi menu was missing, the back to twrp and installed allzygotefix2.zip again.
now wifi works and I could activate it...
Click to expand...
Click to collapse
So you wiped everything (vendor cache etc.) and then only flashed the boot img without vendor? could you describe every step you did?
yes I did wipe everything,
but I think you can follow the first steps how to install it from tom.android.
keep it in bootloop with the redme logo and go something to drink for 30-50minutes...
I think there are no other steps needed (seperated boot and vendor image from tom.android)
I will try it tomorrow again, to get a proof that it is working as tom.android wrote it.
but Chrome is freezing/lagging alot... and the homescreen does not rotate anymore.
deepblue2000 said:
yes I did wipe everything,
but I think you can follow the first steps how to install it from tom.android.
keep it in bootloop with the redme logo and go something to drink for 30-50minutes...
I think there are no other steps needed (seperated boot and vendor image from tom.android)
I will try it tomorrow again, to get a proof that it is working as tom.android wrote it.
but Chrome is freezing/lagging alot... and the homescreen does not rotate anymore.
Click to expand...
Click to collapse
i didnt mange to get to the redmi Logo. Mi Logo, blackscreen Reboot, Mi Logo Blackscreen. stays black.
the Redmi Logo shows up, if you follow the steps from Page 1 ..
but do not flash the vendor.img
edit:
I wanted to do it again, to understand what I did, so I wiped everything and formated data again
but now it works from the beginning.
Edit: chrome still freezes/crashes, but Edge works perfect
Edit: Bluetooth does not work, always crashing and brightness does not work
First of all, the download link of all the files required for this "ROM" is taken from the "xda developers forum" posts.
I was constantly experimenting with GSI roms for Redmi 8. I was able to install the Pixel ROM on Redmi 8. I don't think you will have a problem if you follow the steps I shared with you one by one.
I do not take responsibility for the ROM. RESPONSIBILITY IS ENTIRELY YOURS.
Not working
-Face unlock
-Radio
-VoLTE
(You need to make a setting for the camera, notch, LTE Mobile Network and auto-brightness. I told you how to make the settings.)
NOTE: A computer is required to make this ROM setup. It must also be installed in ADB on your computer.
Note: You can install this ROM Google Camera as apk. Unfortunately, there are no features such as Portrait, night mode in the original camera application of the device. However, you can use it if you install it as an apk.
Please download that files:
Download - Pixel Experience ROM GSI file
Download --- Sky Hawk Recovery file
Download - Permissiver V5
Download -Certification Patch for Redmi 8
Download -Treble overlay for Redmi 8
Download --- Lastest Magisk-v20.4
Here -Get the TWRP Official for Redmi 8
Download - vbmeta.img
Note: Please charge your phone at least 60%
First, take the necessary backups as your phone will be completely reset.
1- Unlock your bootloader. For unlocking follow this: http://en.miui.com/unlock/
2- Copy all the files to your SD Card (PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img, SHRP_v2.2.zip, Permissiver_v5.zip, Certification_Patch.zip, Magisk-v20.4.zip, treble-overlay-xiaomi-redmi8.apk)
3-Enable USB debugging. Connect the phone your computer Then copy the twrp.img and vbmeta.img files to the adb folder.
Note: If the name of your twrp file is not twrp.img, please set its name to twrp.img.
4- Go to your computer, open adb folder in cmd, write that:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
5- Now we will go to the restart phone command. At that moment, you should quickly hold down the volume up key and power button of your phone. Enter this command:
fastboot reboot
Then, hold down the power button with quick boost and turn on twrp.
6- Install Magisk-v20.4.zip in twrp.
Then restart the phone. After the phone reboots, check if Magisk is installed. Once you see it installed, reboot the phone in recovery mode.
7- Install SHRP_v2.2_olive.zip then reboot recovery.
8- Now find the wipe button and tap it. Then press the format data and confirm by typing yes.
9- Then tap wipe again and click on the wipe button at the bottom right.
10- Tap the wipe again and tap on advanced wipe. Select the Dalvik, data, cache, system partitions and reset them.
11- Now return to the main menu screen and tap flash. Select your SD card in the lower right section and tap the PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img file. Then select it as system image and install it.
12- Return to the main menu and come to the flash section and install the file Permissiver_v5.zip.
13- Then go back to the flash section and install the Certification_Patch.zip file.
14- Return to the main menu, tap wipe and complete the wipe from the button on the bottom right.
15- Reboot the system. Your device will either boot in fastboot mode or be bootloop. (If you see it open normally and no problems occur, you can skip step 18.)
16- Go to fastboot mode.
17- Connect the phone to the computer and open the adb folder on cmd. Type:
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
The phone will reboot and turn on. Please set up the phone and turn USB debugging back on.
18- After doing setup and enabling usb debugging, reboot to recovery mode and install magisk.zip. Then reboot the phone.
19- Install build prop editor(https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor&hl=en&pli=1) and root browser(https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en) from the Play Store.
20- Open root browser and allow root access then go to your SD card and find treble-overlay-xiaomi-redmi8.apk
21- Copy to treble-overlay-xiaomi-redmi8.apk on Root Directory/system/overlay/ folder.
22- Select treble-overlay-xiaomi-redmi8.apk file on overlay folder and tap the three dots in the top right and tap the properties.
23- Click on the Permissions at the top bar.
24- Select like this photo (link: https://lh3.googleusercontent.com/p...VrSOGT_V9Q2bzgy5IuE9nIfPslILJ1Vz=w429-h904-no ) and click apply then reboot system.
25- Open the build prop editor and allow root access. then tap the 3 dots in the upper right and tap new.
name= persist.camera.HAL3.enabled
value= 1
Set it to and save it. Restart the system.
26- Go to the dialer and dial *#*#4636#*#*. Tap Phone information and set "set preffered network type: LTE only." Then reboot system.
27- Finally, if you want to fix the appearance of the screen notch go to
developer settings >> display cutout and select corner cutout.
That was it. Please note that I am not a developer, so I cannot resolve any errors. I believe that if you apply them like me, you won't have a problem. I will be waiting for your comments. Have a nice day.
I´ll give it a try in my wife´s redmi 8, cus I had tried to flash a bunch of roms in that device and I had not success. Thanks
dngr.fun said:
I´ll give it a try in my wife´s redmi 8, cus I had tried to flash a bunch of roms in that device and I had not success. Thanks
Click to expand...
Click to collapse
You're welcome. If you encounter any problems, please let me know. If you follow what I wrote under normal conditions step by step, you won't have a problem.
Query before flashing
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.
hrwt20 said:
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.
Click to expand...
Click to collapse
At first I tried installing A-only on my device but it didn't work. It worked when I installed A / B. So please try A / B GSI. Because the device you have is probably A / B, not A-Only.
Finger print is working and face unlock is not have in Pixel Experience ROM.
VOLTE and Radio is not working bro.
I will list all the features that work by edit the post today or tommorrow bro
Certification_patch.zip
Whats the use for certification_patch.zip file?
Does it fixes the certification status in google play store?
Also, Can this file be used in any othe gsi too?
coolboyforeva said:
Whats the use for certification_patch.zip file?
Does it fixes the certification status in google play store?
Also, Can this file be used in any othe gsi too?
Click to expand...
Click to collapse
This file exists to integrate the model of the device into rom. I don't know much about google play and you can also install this and permissiver_v5 with other gsi roms. These only for Redmi 8.
hrwt20 said:
Hello Boss,
on checking the system by "Treble Check" app, it is showing that it is A-type System partition. And the ROM you suggested is AB type. Is there any thing i should worry about before flashing.
I am currently using Lineage OS (unofficial), and following functions doesn't work on it.
Finger print
VOLTE
Radio
face unlock
What about this ROM functionality.
Click to expand...
Click to collapse
Before system-as-root was used only on A/B devices but now all devices that ship with Android 9 must use system-as-root. Because of this reason you need to flash A/B roms on A-Only on these devices. As you can see from this page's device list, Redmi 8's image type is A/B so you need to flash an A/B image: https://github.com/phhusson/treble_experimentations/wiki
Does the sensor work? I tried other gsi and custom roms and sensors like accelerometer doesnt work..
Abdul Aziz Shakib said:
Does the sensor work? I tried other gsi and custom roms and sensors like accelerometer doesnt work..
Click to expand...
Click to collapse
All sensors working
i tried it and the sensors didn't work. i needed to flash stock rom and then pixel rom over the stock rom to get it work. seems logical, had no issue so far except the camcorder. when i record a video, lets say i recorded a video for 10 second. but when i play the video, it becomes 1hour video and the sound doesn't sync with the video. video stays frozen the whole time and plays normally at the last few seconds. i tried other gsi and had the same issue. is something wrong? any known solution? are you facing the same problem? if not, then which camera app you are using? thanks in advance because pixel experience is working now after following ur steps
Yes, there is a problem in this regard. Unfortunately, I could not solve this problem. I usually use Instagram cam for video. You can try bro
Abdul Aziz Shakib said:
i tried it and the sensors didn't work. i needed to flash stock rom and then pixel rom over the stock rom to get it work. seems logical, had no issue so far except the camcorder. when i record a video, lets say i recorded a video for 10 second. but when i play the video, it becomes 1hour video and the sound doesn't sync with the video. video stays frozen the whole time and plays normally at the last few seconds. i tried other gsi and had the same issue. is something wrong? any known solution? are you facing the same problem? if not, then which camera app you are using? thanks in advance because pixel experience is working now after following ur steps
Click to expand...
Click to collapse
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.
kouseralamin said:
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.
Click to expand...
Click to collapse
it works sometimes but not always.. Currently I am using Havoc OS and it doesn't have a gallery app. So I downloaded "Gallery Go" from playstore and when I try to open the video from the camera app, it opens with gallery go app.
to be noted, i have added some commands in build.prop..
media.camera.ts.monotonic=0
debug.stagefright.ccodec=0
persist.camera.HAL3.enabled=1
i don't know what these do but these commands were mentioned somewhere to enable camera2api..
am i missing something?
kouseralamin said:
I use havocOs gsi. It has same problem. Solution:
1. record a video.
2. do not close camera app.
3. open video from the camera app not from gallery.
4. play the video once.
if that plays then you can open that same video from any app.
try that, might work.
Click to expand...
Click to collapse
try this for video recording , go to phh treble settings, go to Misc, go to camera force timestamp, clock boottime
Redmi 4A abdal said:
try this for video recording , go to phh treble settings, go to Misc, go to camera force timestamp, clock boottime
Click to expand...
Click to collapse
Thanks, I tried it in the havocOs and it is fully ok now.
Hello, is Bluetooth audio working?
Is there an option for internet speed indicator on this rom?
IS TBH
sessionid0 said:
First of all, the download link of all the files required for this "ROM" is taken from the "xda developers forum" posts.
I was constantly experimenting with GSI roms for Redmi 8. I was able to install the Pixel ROM on Redmi 8. I don't think you will have a problem if you follow the steps I shared with you one by one.
I do not take responsibility for the ROM. RESPONSIBILITY IS ENTIRELY YOURS.
Not working
-Face unlock
-Radio
-VoLTE
(You need to make a setting for the camera, notch, LTE Mobile Network and auto-brightness. I told you how to make the settings.)
NOTE: A computer is required to make this ROM setup. It must also be installed in ADB on your computer.
Note: You can install this ROM Google Camera as apk. Unfortunately, there are no features such as Portrait, night mode in the original camera application of the device. However, you can use it if you install it as an apk.
Please download that files:
Download - Pixel Experience ROM GSI file
Download --- Sky Hawk Recovery file
Download - Permissiver V5
Download -Certification Patch for Redmi 8
Download -Treble overlay for Redmi 8
Download --- Lastest Magisk-v20.4
Here -Get the TWRP Official for Redmi 8
Download - vbmeta.img
Note: Please charge your phone at least 60%
First, take the necessary backups as your phone will be completely reset.
1- Unlock your bootloader. For unlocking follow this: http://en.miui.com/unlock/
2- Copy all the files to your SD Card (PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img, SHRP_v2.2.zip, Permissiver_v5.zip, Certification_Patch.zip, Magisk-v20.4.zip, treble-overlay-xiaomi-redmi8.apk)
3-Enable USB debugging. Connect the phone your computer Then copy the twrp.img and vbmeta.img files to the adb folder.
Note: If the name of your twrp file is not twrp.img, please set its name to twrp.img.
4- Go to your computer, open adb folder in cmd, write that:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
5- Now we will go to the restart phone command. At that moment, you should quickly hold down the volume up key and power button of your phone. Enter this command:
fastboot reboot
Then, hold down the power button with quick boost and turn on twrp.
6- Install Magisk-v20.4.zip in twrp.
Then restart the phone. After the phone reboots, check if Magisk is installed. Once you see it installed, reboot the phone in recovery mode.
7- Install SHRP_v2.2_olive.zip then reboot recovery.
8- Now find the wipe button and tap it. Then press the format data and confirm by typing yes.
9- Then tap wipe again and click on the wipe button at the bottom right.
10- Tap the wipe again and tap on advanced wipe. Select the Dalvik, data, cache, system partitions and reset them.
11- Now return to the main menu screen and tap flash. Select your SD card in the lower right section and tap the PixelExperience_ARM64AB-10.0-20200118-2138-GSI.img file. Then select it as system image and install it.
12- Return to the main menu and come to the flash section and install the file Permissiver_v5.zip.
13- Then go back to the flash section and install the Certification_Patch.zip file.
14- Return to the main menu, tap wipe and complete the wipe from the button on the bottom right.
15- Reboot the system. Your device will either boot in fastboot mode or be bootloop. (If you see it open normally and no problems occur, you can skip step 18.)
16- Go to fastboot mode.
17- Connect the phone to the computer and open the adb folder on cmd. Type:
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
The phone will reboot and turn on. Please set up the phone and turn USB debugging back on.
18- After doing setup and enabling usb debugging, reboot to recovery mode and install magisk.zip. Then reboot the phone.
19- Install build prop editor(https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor&hl=en&pli=1) and root browser(https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en) from the Play Store.
20- Open root browser and allow root access then go to your SD card and find treble-overlay-xiaomi-redmi8.apk
21- Copy to treble-overlay-xiaomi-redmi8.apk on Root Directory/system/overlay/ folder.
22- Select treble-overlay-xiaomi-redmi8.apk file on overlay folder and tap the three dots in the top right and tap the properties.
23- Click on the Permissions at the top bar.
24- Select like this photo (link: https://lh3.googleusercontent.com/p...VrSOGT_V9Q2bzgy5IuE9nIfPslILJ1Vz=w429-h904-no ) and click apply then reboot system.
25- Open the build prop editor and allow root access. then tap the 3 dots in the upper right and tap new.
name= persist.camera.HAL3.enabled
value= 1
Set it to and save it. Restart the system.
26- Go to the dialer and dial *#*#4636#*#*. Tap Phone information and set "set preffered network type: LTE only." Then reboot system.
27- Finally, if you want to fix the appearance of the screen notch go to
developer settings >> display cutout and select corner cutout.
That was it. Please note that I am not a developer, so I cannot resolve any errors. I believe that if you apply them like me, you won't have a problem. I will be waiting for your comments. Have a nice day.
Click to expand...
Click to collapse
Is there a way to flash it without SD card???my adb sideloader also doesnt open
I will try it tank you
I have tested several custom ROM's for Redmi 6a (cactus) but after all I Can say that this ROM is the best one.
Links:
Havoc Os 3.4 download link:
https://drive.google.com/uc?id=1orN9YiOTHgduKp0PgpGUq55KRNCt6UR0&export=download
boot-patch MIUI pie:
https://drive.google.com/file/d/109O1ptY9aapz_SVaysFyQmjmlD3ZPPMT/view
Bugs:
VoLTE
Volume up/down bug during phone calls
Installation:
Bootloader unlock
Install TWRP Pie
Download bootpatch pie 10.4.4 or 11.x
Magisk 19.3
Gapps arm-10-pico
1. Go to your twrp
2. Now click wipe then right bottom side click Format data and type yes
3. Wipe>advanced wipe>
Dalvik/Art Cache
Data
Internal Storage (optional)
Cache
System
Then Swipe to wipe
4. Copy GSI, Magisk, GAPPS in your SD-Card
5. Now click install button and select SD-Card
6. Then right bottom side select intall Image Option
7. Select your GSI
8. Select System Image> then swipe to confirm Flash
9. After Flash complete then go back and
10. Select bootpatch
11. Select boot> Then swipe to confirm Flash
12. Now go back and click install zip Option
13. select magisk 19.3> then swipe to confirm Flash
14. Now go back to home page and click wipe>advanced wipe
15. Select System
16. click Repair or Change File System
17.Click resize File System> swipe to resize
18. Again back to home page then click install Option
19. select SD-Card
20. select GAPPS> swipe to confirm Flash
reboot system
I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?
@kharuba YouTube video link has been removed from your post. Kindly post the complete steps in your post. Linking to a YouTube video without any more information or detailing steps in the post is against the guidelines. Also, the thread has been moved to the Guides, News, & Discussion sub-forum since it is not a development thread and you're just sharing the ROM.
M_hack! said:
I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?
Click to expand...
Click to collapse
follow my step-by-step Installation guide, it works 100%. If it doesn't boot flash the official MIUI ROM again and try it from this.
Thanks kharuba, Room very good..
how to enable volte ?? other thinks are work fine thanks for sharing.
KarthikEmperor said:
how to enable volte ?? other thinks are work fine thanks for sharing.
Click to expand...
Click to collapse
You will not find a custom ROM with Volte working. Also FM radio is not working.
What about performance ? How big is score in antutu ?
****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash
trash999 said:
****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash
Click to expand...
Click to collapse
Don't try to install face unlock. Then it works. Always deny.
Hi, here's a guide on how install crDroid 7.5 (A11) on Redmi 8
UPDATE: THERE'S 7.5 VERSION AVAIABLE, IF YOU ARE USING 7.4 FOLLOW THIS STEPS TO UPDATE WITHOUT LOSING DATA (NEW ROM IS IN MEGA FOLDER, ):
1- Reboot in recovery
2- Go to Wipe -> Avanced wipe -> wipe dalvik, cache and system
3- Go to Reboot -> Recovery
4- Now follow the normal guide from the flashing of the .img file as system image
VERY IMPORTANT: DON'T FORMAT DATA AFTER FLASHING GSI FIXER OR YOU WILL LOST ALL YOUR DATA
Features:
- All functions of the phone work (face unlock, fingerprint, voLTE, voWIFI, hotspot, bluetooth, fast charge, DT2W, ...)
- Magisk safetynet passed without flash nothing (screenshot at the bottom)
- Permissive Selinux by default (in settings is writing disabled, it's wrong) but you can switch to enforcing with
SelinuxModeChanger app, apk at the bottom
What doesn't work
- Nothing if you use fixes below
Note 1: You may have problems with the brightness or sim calls/sms, there are solutions:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For sim calls: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "GSM/WCDMA/LTE" or "Global" (try which is better for you) and then reboot
Note 2: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, YOU NEED THIS ROM IF YOU WON'T PROBLEMS
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "crdrom-v302-210315-arm64-bvZ.img" from "crdrom-v302-210315-arm64-bvZ.img.xz" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "crdrom-v306-210425-arm64-bvZ.img" (Extracted from the .xz file) -> select "system image" and flash
12- Wait and then go to Reboot -> Recovery
13- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
14- Wait and then go to Reboot -> Recovery
15- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
16- Wipe -> Format data -> type "yes"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "BiTGApps-arm64-11.0.0-R19_signed.zip"
19- Wait and then go to Reboot -> System
20- Configure phone and enjoy your new rom
Note 4: I reccomend you to flash magisk after you have configured the rom to avoid problems, I leave you the zip to flash in recovery below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
Happy that many GSI roms are under develment. I hope this phone will die due to hardware, as there are lots of options in future to keep the software updated.
Anyway, if someone intends to try, following is the link of all GSI Roms.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Can i flash vbmeta through recovery
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
Hey
I'm not using crDroid yet, but I've already installed TWRP.
It is advertised that you should flash vbmeta when you're installing TWRP.
I hope I can help you
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
No, you have to flash it with ADB like twrp
letouvetpierre said:
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Click to expand...
Click to collapse
I recommend you to remove it from the magisk app to avoid problems but I think that would be the same
Naulels said:
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Click to expand...
Click to collapse
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
letouvetpierre said:
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
Click to expand...
Click to collapse
Yes, all work fine becouse you flash the gsi fixer for gsi roms on redmi 8
Estatè Mosconi said:
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Click to expand...
Click to collapse
I have reinstalled and fixed it, thanks
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
letouvetpierre said:
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
Click to expand...
Click to collapse
Hi, I'm happy for you, for safetynet try the magisk module, I didn't have this problem, anyway, try the rom and than leave a feedback, it could be useful for other people who want to try this rom
I can't get this rom to work correctly. Did the steps as described, but it has SELinux not enforced and Google play isn't certified. Tried multiple times.
EDIT: seems my phone is soft bricked now (Can't install any rom). Going back to xaomi stock to try again.
I tried again and got it to work. The certificate patch throws an error but Google apps are working.
I get an SE Linux not enforcing error. though.
Is there anything I can do about that?
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
ndduc said:
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
Click to expand...
Click to collapse
There is the solution for brightness in the guide, you don't need that file
Estatè Mosconi said:
There is the solution for brightness in the guide, you don't need that file
Click to expand...
Click to collapse
thanks you, i fixed
ndduc said:
thanks you, i fixed
Click to expand...
Click to collapse
Ok good