Database Develop

[RECOVERY][UNOFFICIAL][OREO] TWRP 3.2.3-0

DISCLAIMER:
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
TWRP 3.2.3-0 for Huawei Nova​
Introduction
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Click to expand...
Click to collapse
Notes
Decryption doesn't work.
You can use it on Nougat too.
Click to expand...
Click to collapse
Requirements
Huawei Nova
Unlocked bootloader ( here's a guide about how to unlock it). If you don't have the unlock key, then you no longer can unlock it. You gotta thank Huawei for not allowing unlocked bootloader anymore.
Click to expand...
Click to collapse
Installation
If you already have a TWRP installed:
1) Boot in TWRP.
2) Select "Install", then "install image".
3) Select the recovery.img where you've placed it and then choose recovery from the partition list.
5) Reboot recovery if you wanna boot in TWRP or reboot system.
Click to expand...
Click to collapse
If you don't have any TWRP installed:
1) Unlock your bootloader. Here's a guide about how to do it.
2) Run the following command in terminal (linux) or command prompt (windows, e.g. minimal ADB and fastboot):
Code:
[COLOR="red"]/* If you are doing this on Linux,
then run fastboot with [B]sudo[/B]: sudo fastboot blabla */[/COLOR]
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Download
AndroidFileHost | Mediafire
Sources
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-8.1
Device tree: https://github.com/skinzor/android_device_huawei_hwcan/tree/android-8.1
Kernel: https://github.com/skinzor/android_kernel_huawei_msm8953-1/tree/lineage-15.1 (i'm sorry for that mess of commits history, but i'll clean it as soon as possible)
Click to expand...
Click to collapse
Credits
@abhishek987
@ TWRP team
@ OmniROM
@ Huawei
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][OREO] TWRP 3.2.3-0, ROM for the Huawei Nova/Nova Plus
Contributors
#Henkate
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-09-02
Last Updated 2018-09-03

Reserved
You don't have any use for this TWRP yet, but soon you will.
Everything is working on LineageOS 15, but i still have to do few changes. E.g. i've noticed that fingerprint isn't always available after a reboot, so i think the service is starting too late or something. Also, i still got to use it myself for few days and see if everything is fine (at first glance it's fine) or maybe i'll leave that to y'all.
I've chose to publish the TWRP today as LineageOS 15 will be published in the upcoming day(s).

Reserved

Wow great news ! thanks @#Henkate i cant wait for taste it !

Wow ... Good new in the morning ....
Waiting LOS 15 every hour .... Tik tok ... Tik tok

Great news! :highfive: looking forward to trying it.

Thanks for this!

can be installed TWRP in the e-recovery section, thus the recovery will remain a stock. Or so it is impossible?
P.S. In future i want to install LOS 15.1

oleh.onysko said:
can be installed TWRP in the e-recovery section, thus the recovery will remain a stock. Or so it is impossible?
P.S. In future i want to install LOS 15.1
Click to expand...
Click to collapse
You mean having stock and TWRP recovery at the same time right? Well, I've never tried this but I've read that it was done on other Huawei phones, so I guess it would work on Nova too.

#Henkate said:
You mean having stock and TWRP recovery at the same time right? Well, I've never tried this but I've read that it was done on other Huawei phones, so I guess it would work on Nova too.
Click to expand...
Click to collapse
Onother TWRP i used: stock recovery on recovery, and TWRP on e-recovery.

oleh.onysko said:
Onother TWRP i used: stock recovery on recovery, and TWRP on e-recovery.
Click to expand...
Click to collapse
Yeah. As I've said, I've never tried this, but it was done on other Huawei phones, so I guess it would work on Nova too.
If you'd like to, you can try:
Code:
fastboot flash [B]e[/B]recovery recovery.img

oleh.onysko said:
can be installed TWRP in the e-recovery section, thus the recovery will remain a stock. Or so it is impossible?
P.S. In future i want to install LOS 15.1
Click to expand...
Click to collapse
why do you want to do that? No judging here, just to know

Hi,
I've flashed your previous TWRP ver 3.1.1-0
At first, my ADB detected it. while it boots on TWRP logo. But as soon as TWRP enters the menu it went offline. I need to pull important data from internal memory before I flashed it

Thank you so, so much for keeping this device alive, #Henkate!

Is it work with nova plus

I have a problem using Oreo TWRP, commands on Data partition dont work for me. Like wiping, backing up, formating.
First i was on Emui 5. Unlock it, flash Oreo TWRP and having error for Data partition (won't mount). Then i need to install TWRP 3.1.1 (the red one) to format Data, and after that install back 3.2.3 to install Lineage 15.
Exact the same thing happened when i move from Lineage to AOSP Extended.
Where I'm wrong?

Please find a new 3.2.3-0 build here:
https://www.androidfilehost.com/?w=files&flid=298114
It contains the fix for the crypto footer error message, so now it is also possible to install nanodroid on oreo. It was not possible before, because /data could not be mounted.
This issue lead me to the commit which fixed it:
https://github.com/TeamWin/Team-Win-Recovery-Project/issues/1265
https://github.com/LineageOS/androi...ommit/f4426d93b22f9beb9d532e98186c71ad6376faf

gt_o said:
Please find a new 3.2.3-0 build here:
https://www.androidfilehost.com/?w=files&flid=298114
It contains the fix for the crypto footer error message, so now it is also possible to install nanodroid on oreo. It was not possible before, because /data could not be mounted.
This issue lead me to the commit which fixed it:
https://github.com/TeamWin/Team-Win-Recovery-Project/issues/1265
https://github.com/LineageOS/androi...ommit/f4426d93b22f9beb9d532e98186c71ad6376faf
Click to expand...
Click to collapse
期待您的lineage16，有可能启动吗？

[RECOVERY][3.4.0-10][cepheus]Official/Unofficial TWRP for Xiaomi Mi 9 (Stable)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- Android Q Supported
- F2FS support
- Fastboot boot command support
- Compatibility.zip error fixed
- Android 11 Decryption
Download:
TWRP 3.4.0-10 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
TWRP 3.3.1-62 Unofficial by mauronofrio
TWRP 3.3.1-52 Unofficial by mauronofrio
TWRP Official Builds
TWRP 3.3.1-46 Unofficial by mauronofrio
TWRP 3.3.1-42 Unofficial by mauronofrio
TWRP 3.3.1-41 Unofficial by mauronofrio
TWRP 3.3.1-39 Unofficial by mauronofrio
TWRP 3.3.1-37 Unofficial by mauronofrio
TWRP 3.3.1-35 Unofficial by mauronofrio
TWRP 3.3.1-34 Unofficial by mauronofrio
TWRP 3.3.1-30 Unofficial by mauronofrio
TWRP 3.3.1-27 Unofficial by mauronofrio
TWRP 3.3.1-24 Unofficial by mauronofrio
To Flash the TWRP:
if it's the first time you flash the TWRP or you are getting problems of TWRP lost or device doesn't boot after flashed magisk or something else you need to flash a script to patch your vbmeta:
VBMETA PATCHER
To flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
Flash the VBMETA PATCHER and reboot.
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_cepheus
https://github.com/LasagnaTeam/TWRP_Kernel_Cepheus
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
@notsyncing
@PeterCxy for the commits about wrappedkey
@siankatabg for the latest commit about vendor.gatekeeper.disable_spu
@Cozzmy13
@ingbrzy for the help with Android Q decryption problems
Thanks to all testers on the Telegram Group
Created 2019-02-28

Not working for me, stock on entry screen (teamwin)

Laserek_Poland said:
Not working for me, stock on entry screen (teamwin)
Click to expand...
Click to collapse
oh finally a tester,can you please contact me on telegram? My username is always mauronofrio
Or can you take a log?
Code:
adb shell dmesg
and
Code:
adb shell cat /tmp/recovery.log
Copy the output in a file or in a pastebin

Sent on prv
If you give me your email address I will sent you a result of dmesg but cant to it here as its to many characters (around 120k)

Laserek_Poland said:
Sent on prv
If you give me your email address I will sent you a result of dmesg but cant to it here as its to many characters (around 120k)
Click to expand...
Click to collapse
Seen, can you use https://pastebin.com/ to upload the log? is not needed registration

Sent you link
Got it?

Laserek_Poland said:
Sent you link
Got it?
Click to expand...
Click to collapse
There is a problem, it is a dmesg when you start the phone, i need the dmesg when you are stucking on teamwin logo

its from stucking T... logo taken

Laserek_Poland said:
its from stucking T... logo taken
Click to expand...
Click to collapse
Ok i need to more test, can we talk on a chat?

Sent me message please and explain what you need

mauronofrio said:
Ok i need to more test, can we talk on a chat?
Click to expand...
Click to collapse
but how do you install the twrp without an unlocked phone. I received it on March 1st and it takes 360 hours to unlock.

baggino said:
but how do you install the twrp without an unlocked phone. I received it on March 1st and it takes 360 hours to unlock.
Click to expand...
Click to collapse
some user account can unlock the phone immediately,no need to wait 360 hours.

baggino said:
but how do you install the twrp without an unlocked phone. I received it on March 1st and it takes 360 hours to unlock.
Click to expand...
Click to collapse
You need a higher grade Xiaomi account.

To work with this TWRP beside of unlockbootloader you must have deceipted phone

Laserek_Poland said:
To work with this TWRP beside of unlockbootloader you must have deceipted phone
Click to expand...
Click to collapse
What does this mean, deceipted phone?

marcel112 said:
What does this mean, deceipted phone?
Click to expand...
Click to collapse
It's a typo. She/He meant to write "decrypted". There are many guides on the internet on that.

kenny59 said:
It's a typo. She/He meant to write "decrypted". There are many guides on the internet on that.
Click to expand...
Click to collapse
I know... I only didn't knew the word Deceipted that's why is asked

Only xiaomi account that registered on 2014. Can unlock without waiting time.

kauw5164 said:
Only xiaomi account that registered on 2014. Can unlock without waiting time.
Click to expand...
Click to collapse
My account is registered on 2014 but 360 hours wait, so unfortunately it's not correct

kauw5164 said:
Only xiaomi account that registered on 2014. Can unlock without waiting time.
Click to expand...
Click to collapse
My account from 2012 and still waiting
Sent from my MI 9 using Tapatalk

[RECOVERY][3.4.0-0][I01WD]Official/Unofficial TWRP for Asus ZenFone 6 (Stable)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Actually the twrp boots;
- Stock Rom can be flashed.
- Decryption works only if you flash the installer and reboot again in twrp.
- Full Android 10 Support.
Install guide (Reccomended):
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot boot recoveryimgfilename.img" in command line (if you want to have it permanently you should flash the installer)
5. If you will flash the installer and you are stock you need also to flash magisk or your phone will not boot again
6. Enjoy it
Other Install guide (More articulated but fully functional):
Actually this function is disable
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot boot recoveryimgfilename.img" in command line
5. Copy the recoveryimgfilename.img in the phone memory
6. Go in advanced menu
7. Click on "Install Recovery Ramdisk"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Choose the recoveryimgfilename.img
9. Swipe to install
HOW TO UPDATE a ROM and KEEP TWRP and ROOT:
- Disable all magisk modules;
- Put rom.zip, twrp installer.zip and magisk.zip on your internal storage;
- Flash Rom;
- Flash TWRP Installer;
- Flash magisk;
- Reboot
- Wrappedkey support
- Android 10 Support
If you want you can also update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- Menu/modules/+ button/select the twrp installer.zip and flash it;
- Always in Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
Tips:
If you alread have a twrp flashed you can only flash the new installer zip or the new installation method to update your TWRP (remember to flash again magisk or your system will not boot).
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Download:
Official Builds
TWRP 3.4.0-0 Q Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial Installer by mauronofrio
TWRP 3.3.1-24 Pie Unofficial by mauronofrio
TWRP 3.3.1-24 Q Unofficial by mauronofrio / Another Mirror
TWRP 3.3.1-24 Unofficial Installer by mauronofrio
TWRP 3.3.1-23 Pie Unofficial by mauronofrio
TWRP 3.3.1-23 Q Unofficial by mauronofrio
TWRP 3.3.1-23 Unofficial Installer by mauronofrio
TWRP 3.3.1-22 Pie Unofficial by mauronofrio
TWRP 3.3.1-22 Q Unofficial by mauronofrio
TWRP 3.3.1-22 Unofficial Installer by mauronofrio
TWRP 3.3.1-21 Pie Unofficial by mauronofrio
TWRP 3.3.1-21 Q Unofficial by mauronofrio
TWRP 3.3.1-21 Unofficial Installer by mauronofrio
TWRP 3.3.1-19 Unofficial by mauronofrio
TWRP 3.3.1-19 Unofficial Installer by mauronofrio
TWRP 3.3.1-15 Unofficial by mauronofrio
TWRP 3.3.1-15 Unofficial Installer by mauronofrio
TWRP 3.3.1-10 Unofficial by mauronofrio
TWRP 3.3.1-10 Unofficial Installer by mauronofrio
TWRP 3.3.1-5 Unofficial by mauronofrio
TWRP 3.3.1-5 Unofficial Installer by mauronofrio
TWRP 3.3.1-1 Unofficial by mauronofrio
TWRP 3.3.1-1 Unofficial Installer by mauronofrio
TWRP 3.3.1-0 Unofficial by mauronofrio
TWRP 3.3.1-0 Unofficial Installer by mauronofrio
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/mauronofrio/android_bootable_recovery
https://github.com/mauronofrio/android_device_asus_I01WD_TWRP
Precompiled Stock kernel
Donations:
Credits:
Thanks to @micky387 and to @digitalpixel for the testing
Created 2019-06-08

Hi to all, i have not tested this twrp, be careful to use it.

Thank you very much , i flashed it and everythings works

bouyhy01 said:
Thank you very much , i flashed it and everythings works
Click to expand...
Click to collapse
How did you flash it?
Give me more informations, decryption works? (are you able to see files in internal storage?) Vibration work? Are you able to flash magisk or others zips? You see some problems in the recovery.log? Some red write?

mauronofrio said:
How did you flash it?
Give me more informations, decryption works? (are you able to see files in internal storage?) Vibration work? Are you able to flash magisk or others zips? You see some problems in the recovery.log? Some red write?
Click to expand...
Click to collapse
After flash i did a format data and then managed to flash magisk succefully

bouyhy01 said:
After flash i did a format data and then managed to flash magisk succefully
Click to expand...
Click to collapse
Why did you formatted data? Wasn't you able to see files in internal.storage?

mauronofrio said:
Why did you formatted data? Wasn't you able to see files in internal.storage?
Click to expand...
Click to collapse
Not before formatting data

bouyhy01 said:
Not before formatting data
Click to expand...
Click to collapse
confirm that twrp works? does it install the last magisk? Thanks
Inviato dal mio ASUS_I01WD utilizzando Tapatalk

montagna73 said:
confirm that twrp works? does it install the last magisk? Thanks
Inviato dal mio ASUS_I01WD utilizzando Tapatalk
Click to expand...
Click to collapse
Yep but have to format data or it will show an error coz the data isn’t mounted

is the zenfone 6 an a/b slot device like the zenfone 5z? Do you have to set the slot with fastboot before flashing?

isthisadagger said:
is the zenfone 6 an a/b slot device like the zenfone 5z? Do you have to set the slot with fastboot before flashing?
Click to expand...
Click to collapse
I don't know

isthisadagger said:
is the zenfone 6 an a/b slot device like the zenfone 5z? Do you have to set the slot with fastboot before flashing?
Click to expand...
Click to collapse
it seems to be an A/B device yes.
Fastboot reveals the following:
Code:
(bootloader) has-slot:system:yes
(bootloader) current-slot:a
(bootloader) has-slot:boot:yes

isthisadagger said:
is the zenfone 6 an a/b slot device like the zenfone 5z? Do you have to set the slot with fastboot before flashing?
Click to expand...
Click to collapse
Most if not all new high-end phones are A/B phones now. Normally you don't have to specify the slot as it will just flash to the currently used one.

tried, can't get it to work. when I do the fastboot boot .img command, the phone reboots, showing the whole "bootloader is unlocked, press power to pause" screen, and then it goes back into fastboot, except now the device is frozen (it also vibrates after a few seconds, but nothing else, buttons don't do anything), and I have to use the reboot command to get back to where I started.
I did let the phone update when I got it the other day, not sure if that affects anything.

Tannuu said:
tried, can't get it to work. when I do the fastboot boot .img command, the phone reboots, showing the whole "bootloader is unlocked, press power to pause" screen, and then it goes back into fastboot, except now the device is frozen (it also vibrates after a few seconds, but nothing else, buttons don't do anything), and I have to use the reboot command to get back to where I started.
I did let the phone update when I got it the other day, not sure if that affects anything.
Click to expand...
Click to collapse
same here. I also updated the phone today before unlocking the bootloader, so probably twrp must be updated with new firmware

regenwurm16 said:
Most if not all new high-end phones are A/B phones now. Normally you don't have to specify the slot as it will just flash to the currently used one.
Click to expand...
Click to collapse
I am asking this because on the 5z you needed to switch to the inactive one and flash or it would no longer start.

mauronofrio said:
Hi to all, i have not tested this twrp, be careful to use it.
Click to expand...
Click to collapse
hi bro, thks for your work. i tried to install it but it wont run on my phone,anything to do with my phone be updated before unlock the bootloader???you are making an update of the twrp soon??? hugs

BrauliX said:
hi bro, thks for your work. i tried to install it but it wont run on my phone,anything to do with my phone be updated before unlock the bootloader???you are making an update of the twrp soon??? hugs
Click to expand...
Click to collapse
Hi, i have not the device and Teamwin Founder User (Dees Troy and Bigbiff) got the zenfone 6 from the developer programm, i think i will not update the twrp for now

and you have some advice to me to manage to install your twrp on my zenfone 6??? even with the new system update of asus

I can confirm it does not boot after the latest firmware-updates. If I used fastboot boot "recovery", I got the same result as @Tannuu had.
Is there already a TWRP-Version from @Dees_Troy or @bigbiff ? If you are working on it, it would be very nice, to let us know about the current status.
Thanks for your work.

[RECOVERY][3.4.0-10][RMX1851]Unofficial TWRP for Realme 3 Pro (Stable)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- Sdcard works
- .ozip flash works
- compatibility error fixed
- Android 11 Decryption
Download:
TWRP 3.4.0-10 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
TWRP 3.3.1-17 Unofficial by mauronofrio / Mediafire
TWRP 3.3.1-16 Unofficial by mauronofrio
TWRP 3.3.1-15 Unofficial by mauronofrio
TWRP 3.3.1-12 Unofficial by mauronofrio
TWRP 3.3.1-3 Unofficial by mauronofrio
To Flash the TWRP:
if it's the first time you flash the TWRP or you are getting problems of TWRP lost or device doesn't boot after flashed magisk or something else you need to flash a script to patch your vbmeta:
VBMETA PATCHER
To flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually.
Flash the VBMETA PATCHER and reboot.
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_realme_RMX1851
Precompiled Stock Kernel in use
Donations:
Credits:
Thanks to @4j17h for the tests and the support
Created 2019-02-28

How to Unlock Bootloader for Realme 3 Pro
Hi,
how to unlock bootloader for Realme 3 Pro and Install TWRP thus root?
thanks,

cucurr said:
Hi,
how to unlock bootloader for Realme 3 Pro and Install TWRP thus root?
thanks,
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845

Rajeev said:
Try this
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
Click to expand...
Click to collapse
Thanks for your help, Mr Rajeev

TWRP 3.3.1-12 Realme 3 Pro (RMX1851):
- .ozip flash works
- compatibility error fixed
- added edl button in reboot menu
- added dtbo target in flash image menu
TWRP 3.3.1-12 Unofficial by mauronofrio

Cool. This saves me the trouble of flashing back original recovery for .ozip flashing.
But if i flash ozip, does the stock recovery replace TWRP again? Then i would have to reflash twrp, and vbmeta once more?

Pls tell something abt edl??
mauronofrio said:
TWRP 3.3.1-12 Realme 3 Pro (RMX1851):
- .ozip flash works
- compatibility error fixed
- added edl button in reboot menu
- added dtbo target in flash image menu
TWRP 3.3.1-12 Unofficial by mauronofrio
Click to expand...
Click to collapse
whats that emergency download mode(edl)
when i clicked on it
rm3p just got turned off

mauronofrio said:
TWRP 3.3.1-12 Realme 3 Pro (RMX1851):
- .ozip flash works
- compatibility error fixed
- added edl button in reboot menu
- added dtbo target in flash image menu
TWRP 3.3.1-12 Unofficial by mauronofrio
Click to expand...
Click to collapse
is data decryption error still there ??
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
mauronofrio said:
TWRP 3.3.1-12 Realme 3 Pro (RMX1851):
- .ozip flash works
- compatibility error fixed
- added edl button in reboot menu
- added dtbo target in flash image menu
TWRP 3.3.1-12 Unofficial by mauronofrio
Click to expand...
Click to collapse
is data decryption error still there ??

abhi.goel said:
is data decryption error still there ??
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
is data decryption error still there ??
Click to expand...
Click to collapse
There aren't data decryption problems

mauronofrio said:
There aren't data decryption problems
Click to expand...
Click to collapse
my bad im on twrp developed by someone else and there is a data decryption error

mauronofrio said:
TWRP 3.3.1-12 Unofficial by mauronofrio
Click to expand...
Click to collapse
Please make aroma gapps working in TWRP. Always it gets frozen while flashing Aroma Gapps.

akkeo said:
Please make aroma gapps working in TWRP. Always it gets frozen while flashing Aroma Gapps.
Click to expand...
Click to collapse
Unfortunately aroma is not more supported by TWRP

TWRP 3.3.1-15 RMX1851 by mauronofrio:
Fixed android 10 decryption;
Updated .ozip flash.
TWRP 3.3.1-15 Unofficial by mauronofrio

mauronofrio said:
TWRP 3.3.1-15 RMX1851 by mauronofrio:
Fixed android 10 decryption;
Updated .ozip flash.
TWRP 3.3.1-15 Unofficial by mauronofrio
Click to expand...
Click to collapse
hello,
how to flash ozip file from newest recovery? twrp not detected any ozip file
edit,
already found the answer, sorry for inconvenience

TWRP 3.3.1-16 Realme 3 Pro (RMX1851) by mauronofrio:
- Fixed decryption on Stock Android 10 ROMs.
TWRP 3.3.1-16 Unofficial by mauronofrio

mauronofrio said:
TWRP 3.3.1-16 Realme 3 Pro (RMX1851) by mauronofrio:
- Fixed decryption on Stock Android 10 ROMs.
TWRP 3.3.1-16 Unofficial by mauronofrio
Click to expand...
Click to collapse
Thanks for the new build....:good:

TWRP 3.3.1-17 Realme 3 Pro (RMX1851) by mauronofrio:
- Fixed Stock Android 10 ROM flashing in TWRP;
- FIxed error 255 during backups caused by /data/per_boot folder.
TWRP 3.3.1-17 Unofficial by mauronofrio

Download not workingfor twrp-3.3.1-17-RMX1851-mauronofrio.img. It shows no mirror found.
Does anyone have backup or any other link?

Download not working for twrp-3.3.1-17-RMX1851-mauronofrio.img
It shows no mirror found

mauronofrio said:
TWRP 3.3.1-17 Realme 3 Pro (RMX1851) by mauronofrio:
- Fixed Stock Android 10 ROM flashing in TWRP;
- FIxed error 255 during backups caused by /data/per_boot folder.
TWRP 3.3.1-17 Unofficial by mauronofrio
Click to expand...
Click to collapse
till today download link still not working, can you mirror to other link, please

[RECOVERY][3.4.0-10][tucana]Official/Unofficial TWRP Xiaomi Mi Note 10/CC9 Pro(Stable)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Flash works
- Backup works
- Touch works
- Android 10 supported
- Android 11 Decryption
Download:
TWRP 3.4.0-10 Unofficial by mauronofrio
TWRP 3.4.0-0 Unofficial by mauronofrio
TWRP 3.3.1-4 Unofficial by mauronofrio
Official Links (Remember that the unofficial builds are always more updated)
TWRP 3.3.1-3 Unofficial by mauronofrio
TWRP 3.3.1-0 Unofficial by mauronofrio
To Flash the TWRP:
if it's the first time you flash the TWRP or you are getting problems of TWRP lost or device doesn't boot after flashed magisk or something else you need to flash a script to patch your vbmeta:
VBMETA PATCHER
To flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
Flash the VBMETA PATCHER and reboot.
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_tucana
Precompiled stock kernel
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
Created 2019-12-07

Hi, thanks for sharing.
Seems adb sideload not work

jack15381 said:
Hi, thanks for sharing.
Seems adb sideload not work
Click to expand...
Click to collapse
What's the problem? Have you enabled sideloading from advanced menu?

Hi, i have two questions. I have a mi note 10 pro global.
Twrp can work on this model?
Firmware of Xiaomi eu stable can work on this 256gb model? Or its needed a specific version of this firmware?
Thx

Pampurios said:
Hi, i have two questions. I have a mi note 10 pro global.
Twrp can work on this model?
Firmware of Xiaomi eu stable can work on this 256gb model? Or its needed a specific version of this firmware?
Thx
Click to expand...
Click to collapse
This twrp should work on all mi note 10 variants, i don't think there are problems flashing xiaomi.eu roms on 256gb model

My cc9 pro 256gb is in testing rom. Can I flash this twrp?

luciferlul said:
My cc9 pro 256gb is in testing rom. Can I flash this twrp?
Click to expand...
Click to collapse
Yes

I am trying to flash it on my CC9Pro Premium, but the xiaomi recovery is still there and TWRP is simply not flashed. Everything looks fine while flashing it via fastboot, but it simply doesn't apply. Any clues?

H4N5 said:
I am trying to flash it on my CC9Pro Premium, but the xiaomi recovery is still there and TWRP is simply not flashed. Everything looks fine while flashing it via fastboot, but it simply doesn't apply. Any clues?
Click to expand...
Click to collapse
It's a vbmeta problem on stock roms, try to fastboot boot it

mauronofrio said:
It's a vbmeta problem on stock roms, try to fastboot boot it
Click to expand...
Click to collapse
I was also following this link and flashed the vbmeta first, but no success.
booting it via fastboot doesn't work either.
https://unofficialtwrp.com/twrp-3-3-1-root-xiaomi-mi-cc9-pro/#How_to_Install_twrp_Recovery_on_Xiaomi_MI_CC9_Pro

H4N5 said:
I was also following this link and flashed the vbmeta first, but no success.
booting it via fastboot doesn't work either.
https://unofficialtwrp.com/twrp-3-3-1-root-xiaomi-mi-cc9-pro/#How_to_Install_twrp_Recovery_on_Xiaomi_MI_CC9_Pro
Click to expand...
Click to collapse
Have you tried to use fastboot boot?
If yes, flash the twrp and the use this command:
fastboot oem reboot-recovery

mauronofrio said:
Have you tried to use fastboot boot?
If yes, flash the twrp and the use this command:
fastboot oem reboot-recovery
Click to expand...
Click to collapse
Thanks, that worked!
May I ask why I need to use that specific command?

H4N5 said:
Thanks, that worked!
May I ask why I need to use that specific command?
Click to expand...
Click to collapse
It's a problem of vbmeta, after you flashed the twrp the system will overwrite it with the stock one if you boot directly in the system

I just share my experience.
With ORANGE FOX Recovery, impossible to boot any xiaomi.eu rom after flashing (data wipe or not, with or without decryption, rooted or not)
this one is working... and i realise that i just lost one day of my life yesterday flashing 10 times the fastboot rom and flashing through orangefox the xiaomi.eu rom ...
thankkkkkkkkkkkks! !!!!!!!!!!!!!!!!!!

hi, i used this and managed to boot into twrp..how to flash magisk if internal do not detect magisk files in its storage?since it does not support sd card i assume you guys use usb otg? but i cannot get it selected how many times i tick the usb otg box
for some reason i format the data and reboot, and now it is at continuous loading screen..i managed to go back to twrp but not sure what to do next

pawn_broker004 said:
hi, i used this and managed to boot into twrp..how to flash magisk if internal do not detect magisk files in its storage?since it does not support sd card i assume you guys use usb otg? but i cannot get it selected how many times i tick the usb otg box
for some reason i format the data and reboot, and now it is at continuous loading screen..i managed to go back to twrp but not sure what to do next
Click to expand...
Click to collapse
Flash last 11.0.7.0 with twrp but Re download the ROM from xiaomi.eu because it's boot fixed now

nesquix said:
Flash last 11.0.7.0 with twrp . Re download the ROM from xiaomi.eu because it's not boot fixed.
Click to expand...
Click to collapse
There are some problems with my twrp?

mauronofrio said:
There are some problems with my twrp?
Click to expand...
Click to collapse
Hello dear
Maybe I have to try again, but I had a bad experience with it. I don't know why I'm not the only one, some people on xiaomi.eu can't also boot after rom flashing with this one. It's stuck on the bootlogo or sometime reboot to recovery. Also with orangefox recovery. But I noticed that the Chinese recovery work well with rom flashing (I experienced that with the xiaomi.eu 11.0.5.0), BUT can't flash magisk/edxposed etc.
So now I'm flashing rom with Chinese recovery, and use your recovery for magisk, mods, Xposed modules etc.
Strange but Working.
I have global version of mi note 10.
I will try again if you want, but last time the ROM flashed successfully but the phone was bricked.(full wipe+reflash not Working) Had to do a fastboot flash with erase all user data. And then flashed the ROM with Chinese one, and it booted..

nesquix said:
Hello dear
Maybe I have to try again, but I had a bad experience with it. I don't know why I'm not the only one, some people on xiaomi.eu can't also boot after rom flashing with this one. It's stuck on the bootlogo or sometime reboot to recovery. Also with orangefox recovery. But I noticed that the Chinese recovery work well with rom flashing (I experienced that with the xiaomi.eu 11.0.5.0), BUT can't flash magisk/edxposed etc.
So now I'm flashing rom with Chinese recovery, and use your recovery for magisk, mods, Xposed modules etc.
Strange but Working.
I have global version of mi note 10.
I will try again if you want, but last time the ROM flashed successfully but the phone was bricked.(full wipe+reflash not Working) Had to do a fastboot flash with erase all user data. And then flashed the ROM with Chinese one, and it booted..
Click to expand...
Click to collapse
I think there are some problems in the .eu, maybe they are using busybox or something similar

works well on Mi CC9 Pro! Thanks.