Related
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
bunnsguy said:
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
Click to expand...
Click to collapse
have ODIN open, and battery removed from phone... hook up usb, hold both vol keys, while inserting battery... you should get download mode fine even with a busted power button... what you do next is up to u....
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
bunnsguy said:
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
Click to expand...
Click to collapse
Dude... recovery is useless right now, you have a busted power button... and because of 'said busted power button', none of what you're trying to do is going to work... like youve said...
You are down to trying to force download mode with USB cord, holding the vol keys, and inserting the battery... ADB cannot run commands to a phone stuck at the boot screen... Thread title says, how to reboot to download, and with the button like it is, all you can do is what i've posted...
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
B-Naughty said:
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
Click to expand...
Click to collapse
Yeah, it 'presses' and 'clicks'. I mean it worked most of the day, it got low on power and it just quit working.
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
B-Naughty said:
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
Click to expand...
Click to collapse
goes into boot-loop like if I were holding the volume up/down and the power together. That's what doesn't make sense.
j.curtis.369 said:
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
Click to expand...
Click to collapse
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
It happened to me once before after flashing a bad kernel. I just did what B-Naughty had suggested. Remove battery -> plug in USB -> hold both volume buttons --> then insert battery. Put me right in download mode and Odin it back with a working power button. Unless it's really a hardware problem, then you're out of luck...
bunnsguy said:
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
Click to expand...
Click to collapse
Oh in that case imo i would get another used captivate and wait for the sgs 3
Maybe if I went to a store and sucked up to them they'd let me upgrade a month early (especially since I was initially supposed to upgrade in October)
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
B-Naughty said:
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
Click to expand...
Click to collapse
Maybe a jig would work. But easier, funner solution is adding a line for a Moto Atrix 1 for just a penny plus the $36 fee. Problem solved. Thanks for the help for what could just be a hardware failure. I'll upgrade my other line later when the SGS 3 comes out
I'm stuck at the splash screen. I can't get it to reboot, holding down the power button does nothing. I can't get into recovery. It won't show up in adb to push anything, or fastboot. What do I do?
are you holding down the power down for a good amount of time, sometimes it can take up to 30-45 seconds to hard reset.
pwr2wh8 said:
are you holding down the power down for a good amount of time, sometimes it can take up to 30-45 seconds to hard reset.
Click to expand...
Click to collapse
I've timed it at at least a minute.
cdillio said:
I've timed it at at least a minute.
Click to expand...
Click to collapse
Just timed it at two minutes of holding power. The buttons flash and everything but nothing happens.
cdillio said:
Just timed it at two minutes of holding power. The buttons flash and everything but nothing happens.
Click to expand...
Click to collapse
I have same problem after I flashed OrDroid 3.0, now I can't even get into CWM or TWRP.
yanggame said:
I have same problem after I flashed OrDroid 3.0, now I can't even get into CWM or TWRP.
Click to expand...
Click to collapse
Me neither, please let me know if you find any fixes.
cdillio said:
Me neither, please let me know if you find any fixes.
Click to expand...
Click to collapse
A RUU might fix the problem. But I can't find a Developer version RUU so there is no way to test.
yanggame said:
A RUU might fix the problem. But I can't find a Developer version RUU so there is no way to test.
Click to expand...
Click to collapse
Even if I found one, how would I go about doing it? I can't get it to register in adb.
cdillio said:
Even if I found one, how would I go about doing it? I can't get it to register in adb.
Click to expand...
Click to collapse
I can get into the CWM now!!!
I use All-In-One Toolkit to erase cache, now it works.
---------- Post added at 01:29 AM ---------- Previous post was at 01:24 AM ----------
yanggame said:
I can get into the CWM now!!!
I use All-In-One Toolkit to erase cache, now it works.
Click to expand...
Click to collapse
cdillio, hope you can fix yours, too.
yanggame said:
I can get into the CWM now!!!
I use All-In-One Toolkit to erase cache, now it works.
Click to expand...
Click to collapse
Hmm, I have a mac. Time to figure out how to get it to work.
cdillio said:
Hmm, I have a mac. Time to figure out how to get it to work.
Click to expand...
Click to collapse
Hold down power until the phone turns off the bottom capacitive buttons will start blinking keep holding it until you have a black screen. Then press power button and volume down keep holding both until you are in HBOOT from there go to recovery and then wipe the cache or install a new ROM
nullkill said:
Hold down power until the phone turns off the bottom capacitive buttons will start blinking keep holding it until you have a black screen. Then press power button and volume down keep holding both until you are in HBOOT from there go to recovery and then wipe the cache or install a new ROM
Click to expand...
Click to collapse
Like I've said before, I've held the power button for several minutes and nothing happens.
cdillio said:
Like I've said before, I've held the power button for several minutes and nothing happens.
Click to expand...
Click to collapse
So you are saying that it's stuck at the white HTC screen and when you hold the power button down (it makes a little click and your are not letting up at all) the capacitive light don't start blinking takes about 5 seconds?
and the phone has been on for over 2 hours in this state? If it's plugged in unplug it before you hold down power.
nullkill said:
So you are saying that it's stuck at the white HTC screen and when you hold the power button down (it makes a little click and your are not letting up at all) the capacitive light don't start blinking takes about 5 seconds?
and the phone has been on for over 2 hours in this state? If it's plugged in unplug it before you hold down power.
Click to expand...
Click to collapse
They start blinking, but nothing happens. I just timed it, held the power button for two and a half minutes. And yeah I haven't had it plugged in except to try to connect to it with adb, which was unsuccessful. I'm waiting for it to die.
cdillio said:
They start blinking, but nothing happens. I just timed it, held the power button for two and a half minutes. And yeah I haven't had it plugged in except to try to connect to it with adb, which was unsuccessful. I'm waiting for it to die.
Click to expand...
Click to collapse
Only thing I can think of is if your power button is a bit recessed so when you try to hold it down it is getting released for a hair of a second the capacitive buttons should blink around 15 times and then the phone will restart. The screen is not flashing black or blank for an instant? Try having someone with long nails hold the power button for you if it's recessed or flush with the casing. Also try holding the power button and volume down so if the phone is restarting without your knowledge it would take you to bootloader
nullkill said:
Only thing I can think of is if your power button is a bit recessed so when you try to hold it down it is getting released for a hair of a second the capacitive buttons should blink around 15 times and then the phone will restart. The screen is not flashing black or blank for an instant? Try having someone with long nails hold the power button for you if it's recessed or flush with the casing. Also try holding the power button and volume down so if the phone is restarting without your knowledge it would take you to bootloader
Click to expand...
Click to collapse
It's not the power button, it was working just fine and I was able to restart my phone just fine before this happened. It's something software side. I've tried to get back to bootloader as well. Doesn't work. The capacitive buttons blink an infinite number of times.
cdillio said:
It's not the power button, it was working just fine and I was able to restart my phone just fine before this happened. It's something software side. I've tried to get back to bootloader as well. Doesn't work. The capacitive buttons blink an infinite number of times.
Click to expand...
Click to collapse
OK you are right! Just had to go through everything I could think of. Let it die. Once it does plug it into a wall not computer and let it charge for a hour. Make sure when you go to turn it on to hold volume down and it should take you to the bootloader. Or you could take it back.
nullkill said:
OK you are right! Just had to go through everything I could think of. Let it die. Once it does plug it into a wall not computer and let it charge for a hour. Make sure when you go to turn it on to hold volume down and it should take you to the bootloader. Or you could take it back.
Click to expand...
Click to collapse
Yeah, I'll just warranty it out if that doesn't work. Just frustrating. This is why I hate not having a removable battery. I don't get why the power button won't just hardware cut power from the battery like normally. Could just be my phone is actually frozen frozen.
cdillio said:
Yeah, I'll just warranty it out if that doesn't work. Just frustrating. This is why I hate not having a removable battery. I don't get why the power button won't just hardware cut power from the battery like normally. Could just be my phone is actually frozen frozen.
Click to expand...
Click to collapse
It generally does cut it. I have never ever heard of this. It very well may be a defect.
nullkill said:
It generally does cut it. I have never ever heard of this. It very well may be a defect.
Click to expand...
Click to collapse
I don't know if it is, just because it had worked before I got stuck at the splash screen.
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
I thought it could be any sort of thing so I redownloaded the NL 434 firmware and then also universal generic 434 firmware and flashed back to completely stock with flash tool, doing all wipes and excluding nothing.
Neither of those firmwares fixed the issue, the hard reset function still won't work on my device.
Additional info:
Both buttons function fine individually and can see no obvious reason to suspect it's a hardware fault (though see that it is feasible, just less likely).
I can confirm that it was working initially.
I have an unlocked boot loader.
The last time I can remember it functioning was prior to boot loader unlocking - the first thing I flashed after unlock was cm10.1 and I got stuck in sideload mode with no hard reset to get me out lol
Otherwise the device is fully functional. For the time being I am back on KA07 xperia revolution rom, with advanced stock kernel (cwm) from DooMLoRD.
If anyone has any suggestions or insight it would be greatly appreciated if you'd drop a comment :good:
EDIT:
I've restored back to 350 with EMMA, but to no avail . It did however tell me that my boot version is : 1264-2309 S1_Boot_Lagan_1.0_2
Is there anyway to change the bootloader :S
After getting home I tried re-locking the bootloader which didn't work.
really starting to wonder if I should be taking it back in as hardware fault.. wonder how that will go since I unlocked the BL
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
DreadPirateDan said:
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
Click to expand...
Click to collapse
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up and volume down as just volume down, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
danw_oz said:
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
Click to expand...
Click to collapse
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
DreadPirateDan said:
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
Click to expand...
Click to collapse
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
danw_oz said:
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
Click to expand...
Click to collapse
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
DreadPirateDan said:
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
Click to expand...
Click to collapse
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
danw_oz said:
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
Click to expand...
Click to collapse
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
DreadPirateDan said:
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
Click to expand...
Click to collapse
I would recommend re unlocking the bootloader, the problem is a kernel level driver or hardware but it is definitely around that level.
Did you have any problems, or errors when you first unlocked the bootloader? Maybe Doomlord could give you some of his incredible knowledge on the subject
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Maddhouse said:
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
No the phone is 100% operational outside of the hard reset not working. It is just when I get stuck in a app that freezes or when CWM recovery tricks out and freezes I have to leave the phone for ages till either it a)unfreezes after an hour or so somehow, or b) the battery dies and it shuts off after a couple or more hours.
When your phone is out of action every second day simply cause you can't turn it off it gets pretty annoying haha. If it had a removeable battery I could easily live with it and just rip the batt out no dice.
Power + volume up + down all together
Sent from my C6603 using xda premium
Maddhouse said:
Power + volume up + down all together
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
He has tried that if you read the OP
danw_oz said:
He has tried that if you read the OP
Click to expand...
Click to collapse
I thought i couldnt see it, what post number is it?
Maddhouse said:
I thought i couldnt see it, what post number is it?
Click to expand...
Click to collapse
The very first
danw_oz said:
The very first
Click to expand...
Click to collapse
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Can you change the bootloader? - Hard reset no longer working, Any insight?
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
Click to expand...
Click to collapse
Maddhouse said:
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Click to expand...
Click to collapse
Yeah thats the one
Maddhouse said:
Power + volume up + down all together
Click to expand...
Click to collapse
Already tried that but no luck.
Stranger still is that I've began to notice that in flash mode the LED briefly flick green once then turns off when entering flash mode. Flash mode is still active, it just appears as though the phone is off :/
My phone will no longer boot.
Pressing the power button does nothing.
When I hold down the power button for a period of time (seemingly infinite) and the home and back buttons blink. The screen itself does nothing.
When I hold the power button + up / down buttons (I've tried various combinations) then again, the home and back buttons blink and the screen itself does nothing.
Of course...I'm naturally concerned that the phone is bricked / dead.
I've done some googling and a little reading around and I think I can resolve the issue by botting into fast boot and using hasson2000's all in one toolkit.
....is it likely the phone can be put into 'fast boot' (I think this is what power + volume down does)?
I do I need to wipe "everything" including the custom recovery?
Thanks for your help.
MamaKin said:
My phone will no longer boot.
Pressing the power button does nothing.
When I hold down the power button for a period of time (seemingly infinite) and the home and back buttons blink. The screen itself does nothing.
When I hold the power button + up / down buttons (I've tried various combinations) then again, the home and back buttons blink and the screen itself does nothing.
Of course...I'm naturally concerned that the phone is bricked / dead.
I've done some googling and a little reading around and I think I can resolve the issue by botting into fast boot and using hasson2000's all in one toolkit.
....is it likely the phone can be put into 'fast boot' (I think this is what power + volume down does)?
I do I need to wipe "everything" including the custom recovery?
Thanks for your help.
Click to expand...
Click to collapse
Try holding your phone over/under a bright light while holding down the power key or power/volume key it should boot..
bigdaddy619 said:
Try holding your phone over/under a bright light while holding down the power key or power/volume key it should boot..
Click to expand...
Click to collapse
Will this trick the screen into coming on or something?
MamaKin said:
Will this trick the screen into coming on or something?
Click to expand...
Click to collapse
It has something to do with the proximity sensor I don't know why it works but I have seen many members that used it and it worked every time haha
bigdaddy619 said:
Try holding your phone over/under a bright light while holding down the power key or power/volume key it should boot..
Click to expand...
Click to collapse
bigdaddy619 said:
It has something to do with the proximity sensor I don't know why it works but I have seen many members that used it and it worked every time haha
Click to expand...
Click to collapse
Sadly...It's not worked
Yep he's right. To prevent soft reboots in your pocket, htc made it so that you need a light in the sensor. Try holding the power button under a light, and be patient. If it doesn't work after 5 sec, keep waiting until it does. I have had to wait for 30sec-1m once, but it worked eventually
EDIT: you could also try if ADB works, in that case you'd just have to use adb reboot.
It worked!
Thanks guys
Sloth said:
Try holding your phone over/under a bright light while holding down the power key or power/volume key it should boot..
Click to expand...
Click to collapse
strangely enough this has finally worked for me.
2ka said:
strangely enough this has finally worked for me.
Click to expand...
Click to collapse
any way to disable the proximity sensor?
matze19999 said:
any way to disable the proximity sensor?
Click to expand...
Click to collapse
Are you trying to disable the proximity sensor? If so follow the link below. It is done on an M8 but pretty much the same for an M7.
http://visihow.com/Turn_On_or_Off_P...lence_Speaking_in_TalkBack_Mode_on_HTC_One_M8
It works !!! u saved my phone