[ROM][BETA][11] LineageOS 18.1 for Xperia SP - Xperia SP Original Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android,​which is designed to increase performance and reliability over stock Android for your device.​​All the source code for LineageOS is available in the LineageOS GitHub repo.​And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.​​Official LineageOS website : http://lineageos.org​​
Downloads Links
LineageOS 18.1 (Unlocked Bootloader) :​Xperia SP (Huashan) - Development : https://mega.nz/folder/bgVwHBha#dgbTpERhUxprd4OmVHz6Zw​​Google Applications (optional) :​OpenGApps : https://mega.nz/folder/e9NhVARL#N-csHttthHy0wUJjMI_Ekw​Information : Flash the GApps before the first boot. If not, a clean flash is recommended.​​Recommended Recovery (optional) :​TWRP 3.5.x : http://forum.xda-developers.com/xperia-sp/orig-development/-t3309938​​Disable the default Low-RAM features (optional) :​Low-RAM Property Patcher : http://forum.xda-developers.com/-/-t3737373​​Tools required for bootimage patches such as root :​Boot Bridge for Sony ELF : https://forum.xda-developers.com/-/-/-t3506883​​Informations and references :​About LineageOS updates : ChangeLog available on https://download.lineageos.org/huashan/changes/​About LineageOS device side : See my GitHub trees linked below​​
Flashing and updating
LineageOS clean install :​- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool​- (Optional) Install TWRP Recovery to the FOTA partition (Read the TWRP thread)​- (Optional) Wipe the data & cache (Backup to make sure not to lose data)​- Flash the LineageOS ROM zip from recovery​- (Optional) Flash a GApps package to have the Google Applications​- (Optional) Every additional zip you want to flash​- Reboot the device​- Wait a few minutes for optimizations to finish and the SIM to load before the setup​​LineageOS update / upgrade :​- (Warning) Do not update / upgrade between OFFICIAL and UNOFFICIAL builds​- (Information) Do not wipe anything unless you want to​- Flash the latest LineageOS ROM zip from recovery​- (Optional) Flash a GApps package on first install / upgrade. Not required later, but do update sometimes​- (Optional) Every additional zip you want to flash​- Reboot​​
About the builds
Device tree : https://github.com/LineageOS/android_device_sony_huashan​Kernel sources : https://github.com/LineageOS/android_kernel_sony_msm8960t​Device tree (Development) : https://github.com/AdrianDC/android_device_sony_huashan​Kernel sources (Development) : https://github.com/AdrianDC/android_kernel_sony_msm8960t​Vendor blobs : https://github.com/TheMuppets/proprietary_vendor_sony​​
Issues and reports
- Report issues only if you use the ROM original kernel​- If an additional mod is installed, make sure it is unrelated, and mention it​- Make sure the issue was not discussed earlier in the thread​- Acquire ADB logcat logs to a file : how-to-take-logs-in-android​- If the device crashed and rebooted, retrieve this file from the device : /proc/last_kmsg​- Use Permissive Kernel Patcher and share logcat logs if it solves issues​​
Legal
About LineageOS Legal : http://lineageos.org/legal/​​The LineageOS team would like to thank everyone involved​in helping with testing, coding, debugging & documenting! Enjoy!​​
LineageOS available for Xperia SP also thanks to :
- Google AOSP​- The LineageOS Team​- Arne (arco68)​- Everyone involved in working and testing​
XDA:DevDB Information
LineageOS 18.1, ROM for the Sony Xperia SP
Contributors
AdrianDC
Version Information
ROM OS Version: Android 11
ROM Kernel: Linux 3.4.x
Status: Beta

ALSO WORKING ON SONY HUASHAN
Music Lights Effects implementation fully working
Presentation of the features : https://forum.xda-developers.com/showpost.php?p=73049970&postcount=399
YouTube Presentation :
IMPORTANT FEATURES TO KNOW
Boot sequence : Once the LEDs light up :
- Press Volume - to open LineageOS Recovery,
- Press Volume + to open the FOTA recovery (TWRP usually) if available
Powered-off alarm : When you have set an alarm
- If you power down the device, it will wake automatically 5 minutes before
- If you let the device charge offline, it will automatically reboot 5 minutes before
Gestures : Events like hand-wave and pocket removal can be enabled in the Settings
Force reboot : You can reset the device by holding Power and Volume+ 5 seconds

FEATURES AND ISSUES
Code:
Boot : Ok
GApps : Ok
Partitions (Data, Cache) : Ok
Bluetooth : Ok
WiFi : Ok
WiFi Hotspot : Ok
USB Tethering : Ok
RIL - Phone - Data : Ok
GPS : Ok
Camera : Ok
Camcorder : Ok
Lights : Ok
MicroSD : Ok
Accelerometer : Ok
Compass : Ok
Gyroscope : Ok
AOSP sensors : Ok
Touchscreen : Ok
Gestures : Ok
FM Radio : Ok
Vibrator : Ok
Microphone : Ok
Audio & music : Ok
Bluetooth audio : Ok
Video playback : Ok
NFC : Ok
Kernel : Ok
Graphics : Ok
3D Rendering : Ok
Clock : Ok
DRM : Ok
Offline Charging : Ok
USB : Ok
USB OTG : Ok
Encryption : ? (May fail to encrypt, TODO)
SEPolicies : ? (Permissive, TODO)
Kernel CVE : Partially outdated
Root : Ok (with ADB)
TWRP : Ok (TWRP 3.5.0 recommended, system restore may need a ROM reflash due to a TWRP internal issue)
CHANGELOG
Code:
Future release:
- Work in progress
25/01/2021:
- Upgrade release on Android 11.0.0_r27 January
03/01/2021:
- Update release on Android 11.0.0_r19 December
- Calendar fixes to support Android Go builds without widgets
- CPU deep sleep repaired, improving the battery life
- GPS functionalities restored
02/01/2021:
- Initial public release on Android 11.0.0_r19 December
28/12/2020:
- Initial beta testers release on Android 11.0.0_r19 December

Hell yeah! Starting off 2021 with a bang! Thank you Adrian

amazing adrianDC i dont get out of amazement android 11 on my old device

I have the twrp-3.3.0-0-huashan.img version installed, can I upgrade to 18.1 or is it necessary to have the twrp 3.5 version?

Thumbs up for the new rom in 2021. Thank you Adrian .

marce74 said:
I have the twrp-3.3.0-0-huashan.img version installed, can I upgrade to 18.1 or is it necessary to have the twrp 3.5 version?
Click to expand...
Click to collapse
As stated twice in this thread, TWRP 3.5.0 is the recommended version.
If anything goes wrong on an older version of TWRP, the issues can't be analyzed.
Also, updating the TWRP version is a 60 seconds job at most,
I hardly see any reason to wonder about keeping an older one if everything still works.
PS: Please don't PM directly after a public post asking for the same thing, I answer only when available.

Thanks AdrianDC for your answer, I already updated twrp 3.5.0 and installed rom 18.1 and encountered crashing issues of play store, launcher and system UI, I also constantly lose wifi signal, screen stutters due to to the high consumption of RAM and finally the device gets too hot this did not happen to me in the previous versions
I have tried to use another launcher, it stops and won't start

Due to the fact that my original battery had widened a bit and damaged the case's mounting screws, I was already thinking about a funeral for the Xperia SP. You've piqued my curiosity again! You don't leave much choice - you are crazy

Outstanding work, the ROM is working fine, but after flashing Magisk with BootBridge, it doesn't boot, no Sony logo or anything. I had to use FlashTool in fastboot mode, flash TWRP and reinstall the ROM again.

Wyjek said:
Outstanding work, the ROM is working fine, but after flashing Magisk with BootBridge, it doesn't boot, no Sony logo or anything. I had to use FlashTool in fastboot mode, flash TWRP and reinstall the ROM again.
Click to expand...
Click to collapse
Same for me, Magisk seems to be bricking the device. GApss work fine though.

Thanks for the 01/25 update, it works just fine!
WPA2 with PMF or WPA3 are not able to connect. This is nothing new, though. I never managed to connect the XSP to such wireless networks

[QUOTE = "Ungewiss, publicación: 84392055, miembro: 5546831"]
Gracias por la actualización del 25/01, ¡funciona bien!
WPA2 con PMF o WPA3 no se pueden conectar. Sin embargo, esto no es nada nuevo. Nunca logré conectar el XSP a tales redes inalámbricas.
[/CITAR]
tienes problemas con el lanzador con mi dispositivo tengo problemas de estabilidad

This rom is very nice. Thank you.
But I cannot use magisk with BootBridge for Sony ELF.
I use gapps that make for Android Go edition,because opengapps use a lot of memory. It can download from here.

[QUOTE = "Unagi Dojyou, publicación: 84416357, miembro: 10232449"]
Esta rom es muy bonita. Gracias.
Pero no puedo usar magisk con BootBridge para Sony ELF.
Utilizo gapps que hacen para la edición Android Go, porque los opengapps usan mucha memoria. Se puede descargar desde aquí . View attachment 5208065View attachment 5208059
[/CITAR]
Unagi Doj, ¿podría especificar cuál debo descargar si mi dispositivo es ARM? Me gustaría probar cómo funciona, por favor envíeme una captura.

marce74 said:
Unagi Doj, ¿podría especificar cuál debo descargar si mi dispositivo es ARM? Me gustaría probar cómo funciona, por favor envíeme una captura.
Click to expand...
Click to collapse
I use RoarTheGapps_GO_20201214.zip.
When I tried it first,TWRP said there aren't enough space. So, I placed "tgi-mini"file in tgi_config_files_v3.zip in the same path of that gapps zip. It installed only play store and work like nomal gapps.
But Goggle Drive cannot use with error. Chrome,Youtube,Gmail GO is OK.

Unagi Dojyou said:
I use RoarTheGapps_GO_20201214.zip.
When I tried it first,TWRP said there aren't enough space. So, I placed "tgi-mini"file in tgi_config_files_v3.zip in the same path of that gapps zip. It installed only play store and work like nomal gapps.
But Goggle Drive cannot use with error. Chrome,Youtube,Gmail GO is OK.
Click to expand...
Click to collapse
thanks for helping me but should I flash both files?

@AdrianDC Is there any progress with getting Magisk to work on this ROM? Thanks in advance for the reply.

marce74 said:
should I flash both files?
Click to expand...
Click to collapse
No. Only RoarTheGapps_GO_20201214.zip.
You should read readme.txt.

Related

[DISCONTINUED][ROM][10.0][Q] AOSP 10.0 [SM-A500X][stable]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plain AOSP 10.0
for the Samsung Galaxy A5 2015 Series (SM-A500X)
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's AOSP?
AOSP (Android Open Source Project) is Android just as Google publishes, without any other modifications or additions. More or less AOSP is the Pixel devices stock ROM without gapps. I have added some LineageOS apps. AOSP is "100% pure vanilla android". For more info check here
What's working:
Boots
RIL (Calls, SMS, Mobile data)
Wi-Fi and hotspot
Bluetooth
Camera
Camcorder
Audio
Media playback
GPS
Sensors
FM Radio
Known issues:
Button Lights
Others u tell me
Flashing instructions:
Download ROM, Gapps (optional) and magisk (for root)
Reboot to TWRP
Flash ROM -> Gapps -> Magisk
Reboot
Enjoy Android Q.
Downloads:
ROM: aosp-10-20191015-1628-a5ultexx.zip
Gapps: Use arm bitgapps
Magisk: Use v20.0 or above
Credits:
Adithya R
Google
LineageOS
Testers for their continued support
Other msm8916 devs for Q bringup
NOTE: For reporting any issues, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
ROM sources available at: https://github.com/AOSP-LEGACY
Don't forget to hit the thanks button to show love and support my work.​
XDA:DevDB Information
AOSP 10.0, ROM for the Samsung Galaxy A5
Contributors
Soft-Bullet
Source Code: https://github.com/AOSP-LEGACY
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2019-10-15
Last Updated 2019-10-15
Reserved
TIPS AND TRICKS
- There is an inbuilt theming engine, just enable dev settings and scroll to the bottom, you can set accent colour and launcher icons shape
- Enable battery saver as it does not compromise on performance
thanks to the developers for doing this great job .. gratitude
Is it compatible with A500M? NFC and Dual SIM?
Thanks.
GPS does not work
GPS does not work on my A500M device And not Link Google account . Anyway, thank you very much soft-bullet ... Great job ...
Can flash on A500F?
herbertsilver said:
Is it compatible with A500M? NFC and Dual SIM?
Thanks.
Click to expand...
Click to collapse
sim, flashei no meu e deu tudo certo!
Soft-Bullet said:
Plain AOSP 10.0
for the Samsung Galaxy A5 2015 Series (SM-A500X)
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's AOSP?
AOSP (Android Open Source Project) is Android just as Google publishes, without any other modifications or additions. More or less AOSP is the Pixel devices stock ROM without gapps. I have added some LineageOS apps. AOSP is "100% pure vanilla android". For more info check here
What's working:
Boots
RIL (Calls, SMS, Mobile data)
Wi-Fi and hotspot
Bluetooth
Camera
Camcorder
Audio
Media playback
GPS
Sensors
FM Radio
Known issues:
Button Lights
Others u tell me
Flashing instructions:
Download ROM, Gapps (optional) and magisk (for root)
Reboot to TWRP
Flash ROM -> Gapps -> Magisk
Reboot
Enjoy Android Q.
Downloads:
ROM: aosp-10-20191015-1628-a5ultexx.zip
Gapps: Use arm bitgapps
Magisk: Use v20.0 or above
Credits:
Adithya R
Google
LineageOS
Testers for their continued support
Other msm8916 devs for Q bringup
NOTE: For reporting any issues, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
ROM sources available at: https://github.com/AOSP-LEGACY
Don't forget to hit the thanks button to show love and support my work.​
XDA:DevDB Information
AOSP 10.0, ROM for the Samsung Galaxy A5
Contributors
Soft-Bullet
Source Code: https://github.com/AOSP-LEGACY
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2019-10-15
Last Updated 2019-10-15
Click to expand...
Click to collapse
Não estou conseguindo conectar o bluetooth no fone de ouvido
Os dados móveis está funcionando no seu? O meu só fica com o x na rede do celular
alex junior said:
Plain AOSP 10.0
for the Samsung Galaxy A5 2015 Series (SM-A500X)
Não estou conseguindo conectar o bluetooth no fone de ouvido
Click to expand...
Click to collapse
Just English please
mourarthur said:
Os dados móveis está funcionando no seu? O meu só fica com o x na rede do celular
Click to expand...
Click to collapse
amirizad_7436 said:
Just English please
Click to expand...
Click to collapse
excuse me I can't connect bluetooth to headset.
Hello, is it possible to upload some screenshots please?
Data Sim
Sorry about not speak in english. I told my sim data doesnt work, they only show me the LTE but if stay with the "x" in sim signal.
I flash the RILL Fix for my device (a500m), but continue dont work.
Bug
Theres a huge bug that i can't turn me screen in sleep mode it will vibrate and instantly turn on my screen
alex junior said:
Não estou conseguindo conectar o bluetooth no fone de ouvido
Click to expand...
Click to collapse
Como tu fez funcionar ? o meu carrega e fica tela preta e depois volta pra logo da google e fica carregando dnv.
My a500m when in twrp in pc is recognized by "A500FU" this is correct or it's bug ? when i install i get black screen on select language Anyone can help me ?
any working twrp with this rom ? using now a500fq device with android 9 rr_a5ltexx rom
and any screenshots available ?
Can this be flashed on a SM-A510F (a5xelte)?
afatsumlug97 said:
any working twrp with this rom ? using now a500fq device with android 9 rr_a5ltexx rom
and any screenshots available ?
Click to expand...
Click to collapse
Try this:
https://github.com/DeadSquirrel01/lineage-17_a5_releases/releases/download/20191005/twrp_20191005_a5ultexx.tar

[10.0][OFFICIAL]Resurrection Remix v8.6.5 for Samsung Galaxy J6+

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
​Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome ​
combination of performance, customization, power and the most new features, brought directly to your Device.​
​
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!​
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.​
​
​
Atention: Make sure you have the latest Q bootloader installed (OneUI 2.0), it's necessary for fingerprint!
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Device Tree Common
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
​
XDA:DevDB Information
Ressurection Remix for Samsung Galaxy J6+, ROM for the Samsung Galaxy J6+
Contributors
BarryBlackCat, GeorgeV22, ataberkozen
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Oneui 2.0
Version Information
Status: Stable
Current Stable Version: v8.6.5
Stable Release Date: 2020-12-15
Created 2020-10-05
Last Updated 2020-12-15
8.6.5 Update is here!
Changelog:
Updated all blobs from oneui 2.0 (Android 10 - J610GUBU4CTI1);
Fixed FM Radio;
Fixed a problem with two SIM Cards;
RR version is 8.6.5
Merged Dezember Security Patch
Complete changelog of RR can be found here.
Download: click here.
New Update - 12/25/2020
Changelog:
Updated FP to coral dezember (to pass cts);
Fixed a problem with audio recording in camera.
FingerPrint não funciona.
i updated to android 10, but twrp 3.3 doesn't work with android 10, orange fox doesn't work ne android 10.
you have information to download functional twrp with android q
altemonmoura said:
FingerPrint não funciona.
Click to expand...
Click to collapse
As I said, you need to update to latest Q bootloader, using odin.
Jimmy.camacho said:
i updated to android 10, but twrp 3.3 doesn't work with android 10, orange fox doesn't work ne android 10.
you have information to download functional twrp with android q
Click to expand...
Click to collapse
Use shrp. https://sourceforge.net/projects/sh...P_v2.3.2_j6primelte-144621072020.zip/download
Use shrp.
I can't flash SHRP with twrp.
flash with odin?
Jimmy.camacho said:
Use shrp.
I can't flash SHRP with twrp.
flash with odin?
Click to expand...
Click to collapse
That's weird. Try to flash shrp using odin. Extract recovery.img and compress to .tar
If you don't know how to do that, check pm.
altemonmoura said:
FingerPrint não funciona.
Click to expand...
Click to collapse
Show - Funfou.
BarryBlackCat said:
Reserved
Click to expand...
Click to collapse
It worked, it really is an excellent job
everything works perfectly and is very fluid
great job
So far everything working fine.
Pretty ROM.
I was wondering if it is possible to synchronize the screen with ScreenMirror.
Whenever I try to do the cell phone reboots.
This occurs in all ROMS
Queria saber se é possivel fazer sincronismo de tela com o ScreenMirror.
Sempre quando tento fazer o celular reinicia.
Isso ocorre em todas as ROMS
altemonmoura said:
Show - Funfou.
Click to expand...
Click to collapse
Me ajuda na biometria, o meu não funcionou.
---------- Post added at 02:08 PM ---------- Previous post was at 01:53 PM ----------
fingerprint did not work, please help me.
A biometria não funciona,mais a ROM esta eselente
Can u guys please read the entirely post before reporting anything related to fingerprint?
Please, use english. Any report in others languages will be ignored.
Worked for me so fine
No bugs
Very beautiful , every thing so fine.
Thanks
Please share screenshots
Great job. I am not fluent in English and my translation technique is really bad. That is why I will explain myself in short sentences.
I installed your ROM on my SM-J610G device.
I have only found two flaws:
The first is simpler to explain, it consumes a lot of the battery.
The second is more complex. I have two SIM CARDs but even though I wanted to deactivate one, they both remain active.
The prediction I make is the following: Configuration >> Networks and Internet >> SIM2 (or SIM1) >> Use SIM
At that moment the screen freezes. And I have to cancel the process.
Sorry I can't show the log, but MatLog asks for ROOT privileges and I don't like to root a phone until strictly necessary. For now, if I am not going to use SIM2 I simply remove it from the device.
If possible I appreciate solving a problem that is rather uncomfortable rather than strictly necessary.
leaderhawk0 said:
Worked for me so fine
No bugs
Very beautiful , every thing so fine.
Thanks
Click to expand...
Click to collapse
Only. Bug is fm radio does not work
Edwindrake said:
Great job. I am not fluent in English and my translation technique is really bad. That is why I will explain myself in short sentences.
I installed your ROM on my SM-J610G device.
I have only found two flaws:
The first is simpler to explain, it consumes a lot of the battery.
The second is more complex. I have two SIM CARDs but even though I wanted to deactivate one, they both remain active.
The prediction I make is the following: Configuration >> Networks and Internet >> SIM2 (or SIM1) >> Use SIM
At that moment the screen freezes. And I have to cancel the process.
Sorry I can't show the log, but MatLog asks for ROOT privileges and I don't like to root a phone until strictly necessary. For now, if I am not going to use SIM2 I simply remove it from the device.
If possible I appreciate solving a problem that is rather uncomfortable rather than strictly necessary.
Click to expand...
Click to collapse
That's weird. I have the same variant but I didn't test with two sims, I'll take a look.
leaderhawk0 said:
Only. Bug is fm radio does not work
Click to expand...
Click to collapse
Yeah, sorry about that. I think I know what's wrong with fm radio and I'll release a new update tomorrow or Sunday with a probably fix for that and a fix for an old bug with wifi + bluetooth
hi, i don't have experience at install recovery and rom.
please give odin and custom recovery with tar extension link.
and gapps i want only google play service and store, whitch pack i must download?
nimakheradmand said:
hi, i don't have experience at install recovery and rom.
please give odin and custom recovery with tar extension link.
and gapps i want only google play service and store, whitch pack i must download?
Click to expand...
Click to collapse
If you have read the instructions correctly, you should know that you have to have Android 10 with the OneUI 2.0 on your device, personally, Android 10 for my SM-J610G has not arrived in my country so I installed a ROM from another country, Chile (CHO) that does.
I let it reboot until the beginning and then I turned it off and installed the TWRP (below I will leave you the link where the installation procedure appears, which is very simple) please do not forget to do the patching before installing the RRQ. The rest is very easy.
As for the OPENGAPPS, you should use those that say ARM, Android 10 and the variant I use is the NANO (my reasons) but the minimum is the one that says PICO. In any case, you can press any variant and download the text file "VERSION INFORMATION" that tells you which applications each one brings before downloading the package.
To install TWRP, click here

[ROM][11.0][MiMix2s] ExtendedUI OFFICIAL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ExtendedUI is custom-rom that aims to provide different UI than any other rom on the market.
Also, we got our Telegram channel you can find here updates about the rom, screenshots and more.
- Refined UI by cfdddd (00day/00day0)
- GAPPS included
- Ambient edge lighting
- FOD icon picker
- Double-tap to sleep on statusbar / lockscreeen
- Smart replies toggle
- Battery charging light customizations
- Notification snooze function
- Navigation bar customizations
- Lockscreen shortcuts customizations
- Configurable amount of screen height used for gestures
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache/System
4 Flash firmware for your device
5. Flash the ROM
6. Flash Magisk (Optional)
7. Reboot to System
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System
SOURCEFORGE
ExtendedUI source code
ExtendedUI devices source code
- PixelExperience
- LineageOS
- OmniROM
- POSP
- Havoc-OS
​
XDA:DevDB Information
[ROM][11.0][MiMix2s][OTA] ExtendedUI OFFICIAL, ROM for the Xiaomi Mi Mix 2s
Contributors
xK4m3l
Source Code: https://github.com/StaticDesignStudio/android_kernel_xiaomi_sdm845
ROM OS Version: Android 11
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Created 2020-10-13
Last Updated 2020-10-13
XDA:DevDB Information
[ROM][11.0][MiMix2s] ExtendedUI OFFICIAL, ROM for the Xiaomi Mi Mix 2S
Contributors
xK4m3l
ROM OS Version: 11
ROM Kernel: Linux 4.x
ROM Firmware Required: included
Based On: aosp
Version Information
Status: Stable
Stable Release Date: 2020-10-13
Created 2020-10-13
Last Updated 2020-10-22
==================================
ExtendedUI 2.1 update!
==================================
Changelog:
- December security patch
- Optional FOD icon animation
- Settings homepage redesign
- Oxygenos 11 volume dialog
- Oxygenos 11 quick settings
- Statusbar clock customizations
- Configurable 0, 90, 180, 270 rotation
- Allow to set back swipe deadzone
- Live volume steps
- Allow hiding gesture navbar
- Omnijaws weather
- Add sync tile
- Battery light customization
- Traffic indicator
- Sound tile
- Quick pin unlock
- Updated powermenu
- Set oneplus sans as default
- Updated FOD icon
- Per app data restrictions
- Alert slider support
Notes:
- gapps aren't included
Reserved #2
- GAPPS included?!?!?!
hellonasty said:
- GAPPS included?!?!?!
Click to expand...
Click to collapse
Yes, it says so above.
Just in case someone reads this thread. As of the 22-10-2020 gapps are not included, but afaik they will be in the next update.
Also it's android 11 based, in case that wasn't clear from the thread title XD
What's up with the download link? It only shows android 10 builds
My favorite ROM now updated to Android 11.... downloading right away!
Can I just dirty Install from ExtendedUi v1.2.1 without format data?
touch screen is not working at all for me after clean install :/ it can be related to ebbg screen type - can you provide some fix?
a4t said:
My favorite ROM now updated to Android 11.... downloading right away!
Can I just dirty Install from ExtendedUi v1.2.1 without format data?
Click to expand...
Click to collapse
you need clear install with format data
Is it possible to implement this feature? I like it when the icons are shifted more towards the middle in the status bar.
Just a short question....what about the battery life for normal use? last but not least does this rom implements the aptx+hd+tws audio through bluetooth? thanks a lot
update !! #2
i'm trying now new version 2.1...it seems very good rom...but i have one little question: is possible to implemet system lock apps feature? so i can lock apps access with fingerprint or pin....it's a very important feature for own security...thanks a lot!
EDIT: i downloaded Google Camera from Playstore (v8.1) but it doesn't works, it crashes when i try to open it.
EDIT 2: WARNING!! Google Photo can't access to internal memory, so i can't upload photos on my account.
Mix 2s is now available in both variants vanilla and gapps
fefuzzo said:
i'm trying now new version 2.1...it seems very good rom...but i have one little question: is possible to implemet system lock apps feature? so i can lock apps access with fingerprint or pin....it's a very important feature for own security...thanks a lot!
EDIT: i downloaded Google Camera from Playstore (v8.1) but it doesn't works, it crashes when i try to open it.
EDIT 2: WARNING!! Google Photo can't access to internal memory, so i can't upload photos on my account.
Click to expand...
Click to collapse
Parrot043: MGC_7.6.008_Parrot043_V7.apk
Download MGC_7.6.008_Parrot043_V7.apk by Parrot043.
www.celsoazevedo.com
use this gcam
xK4m3l said:
Parrot043: MGC_7.6.008_Parrot043_V7.apk
Download MGC_7.6.008_Parrot043_V7.apk by Parrot043.
www.celsoazevedo.com
use this gcam
Click to expand...
Click to collapse
hey man so i installed the rom, even this gcam, looks great
just one problem, i am missing about 220GB of space...
My phone is showing up as only 16GB when the phone is 256GB Variant.
Any help on how to fix that? Perferably without losing my settings.
thanks the developer built this amazing rom 4 us(better than the **** **** miui12).
ok i fixed the follow question via extra magisk module.
##solved##
i want to ask why the font cover via magisk module is not applied fully?
magisk ver 21.4, maybe just happened in system apps.
i have found where didn't applied: system ui, settings.
xK4m3l said:
ExtendedUI is custom-rom that aims to provide different UI than any other rom on the market.
Also, we got our Telegram channel you can find here updates about the rom, screenshots and more.
- Refined UI by cfdddd (00day/00day0)
- GAPPS included
- Ambient edge lighting
- FOD icon picker
- Double-tap to sleep on statusbar / lockscreeen
- Smart replies toggle
- Battery charging light customizations
- Notification snooze function
- Navigation bar customizations
- Lockscreen shortcuts customizations
- Configurable amount of screen height used for gestures
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache/System
4 Flash firmware for your device
5. Flash the ROM
6. Flash Magisk (Optional)
7. Reboot to System
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System
SOURCEFORGE
ExtendedUI source code
ExtendedUI devices source code
- PixelExperience
- LineageOS
- OmniROM
- POSP
- Havoc-OS
​
XDA:DevDB Information
[ROM][11.0][MiMix2s][OTA] ExtendedUI OFFICIAL, ROM for the Xiaomi Mi Mix 2s
Contributors
xK4m3l
Source Code: https://github.com/StaticDesignStudio/android_kernel_xiaomi_sdm845
ROM OS Version: Android 11
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Created 2020-10-13
Last Updated 2020-10-13
XDA:DevDB Information
[ROM][11.0][MiMix2s] ExtendedUI OFFICIAL, ROM for the Xiaomi Mi Mix 2S
Contributors
xK4m3l
ROM OS Version: 11
ROM Kernel: Linux 4.x
ROM Firmware Required: included
Based On: aosp
Version Information
Status: Stable
Stable Release Date: 2020-10-13
Created 2020-10-13
Last Updated 2020-10-22
Click to expand...
Click to collapse
This ROM has many many problems, the screen in lock mode remains on, which is why it consumes a lot of battery. The screen lock after a few minutes almost always hangs and cannot be unlocked, only reboot. The same happens when an alarm sounds, you must dazzle to be able to turn off the alarm, but the mobile hangs, until you can only restart it. It is also silly for a smart phone to make it work like the OS of an IPHONE in terms of screen functions (return, close or change APP), which is going backwards ...
*******************************************************
esta ROM tiene muchos muchos problemas, la pantalla en modo bloqueo permanece encendida, por lo cual consumo mucha bateria. El bloqueo de pantalla luego de unos minutos casi siempre se queda colgada y no se puede desbloquear, solo reiniciar. Lo mismo pasa al sonar una alarma, debes desbluoquear para poder apagar la alarma, pero se queda colgado el movil, hasta solo poder reiniciarle. Tambien es tonto que un movil inteligente le hagan funcionar como el SO de un IPHONE en cuando a funciones de pantalla (regresar, cerrar ocambiar de APP), lo cual es ir atras...
LO UNICO QUE SI FNCIONA ES PONER LA SD como memoria interna

[ROM][COMMUNITY] ArrowOS [Android 11][cepheus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS​
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
SELinux is enforcing
WiFi
Audio
RIL
GPS
Camera
Flashlight
NFC
Fingerprint on display
Vibration
Bluetooth
FM Radio
Cast
Any other thing that is not listed in the "What doesn't work" list
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
Support group
ArrowOS channel for cepheus
Changeloge
-2021/04/10
Synced with last sources
April security patch
Add Smart charge
Use pixel fingerprint
Some other improvements from ROM
HOW TO INSTALL
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
HOW TO UPDATE
update via OTA is not available yet, but will be as mush as possible
Reboot to recovery
Flash the new ROM
Flash any addons that you were using previously (GApps, Magisk...)
Reboot
DOWNLOADS
Click here to Download
Tip: choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/EcrosoftXiao/kernel_xiaomi_cepheus (big thanks to EvasiOn, without him won't be this work)
XDA:evDB Information
ArrowOS 11 for cepheus, ROM for the Xiaomi Mi 9
Contributors
lamjiidii1
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 21.3.10
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-02
Last Updated 2021-04-10
Thanks for the build. Everything I need is working except for ctsProfile is not passing. No modules installed or root apps.
iOrpheus06 said:
Thanks for the build. Everything I need is working except for ctsProfile is not passing. No modules installed or root apps.
Click to expand...
Click to collapse
Hi, I'm glad that you like it.
CTS I know about it and I'm working on it, will be fixed as soon as possible
Hey, I am running this and it seems to be an overall great rom! Thank you for your work!
Do you plan on supporting the additional AI button? Currently I cannot seem to be able to map it when trying to use the old magisk AI button remapper.
I am using the latest china beta firmware for that matter, could it be related to that?
I have installed the Vanilla rom and I have to say that it is a very good rom, everything seems to be going very well. What I don't see to be able to update via OTA in future updates, don't you have it? And what is the difference between Rom Vanilla and Gapps? Greetings and thank you very much for your effort in making this great rom very functional
Thanks for the build
A really great ROM! I will stay with that for now!
I took the variant with GAPPS, then rooted it with Magisk.
- the installation process went completely smoothly
- Fingerprint works really well (both the setup and in previous use)...Faceunlock as well
- Android Auto works fine
- ANX camera works (at least the video mode; i used the version "ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip" and "48MPFixR_201.DullAggressiveHylaeosaurus.zip")
- 1% battery drain in 7h in flight mode
... and now an update with a working CTS profile! That would be great!
But as I said, great ROM! Thanks a lot for this!
Dariusdd said:
Hey, I am running this and it seems to be an overall great rom! Thank you for your work!
Do you plan on supporting the additional AI button? Currently I cannot seem to be able to map it when trying to use the old magisk AI button remapper.
I am using the latest china beta firmware for that matter, could it be related to that?
Click to expand...
Click to collapse
Hi, I'm happy that you like it
Well, I find the Al button is a little annoying, especially when it comes to accidentally touching. I think most users with the same note, I'll think about it again.
juansan10 said:
I have installed the Vanilla rom and I have to say that it is a very good rom, everything seems to be going very well. What I don't see to be able to update via OTA in future updates, don't you have it? And what is the difference between Rom Vanilla and Gapps? Greetings and thank you very much for your effort in making this great rom very functional
Click to expand...
Click to collapse
Hello, I'm planning to make it official, so OTA updates are coming soon.
The difference between gapps version and vanilla is: vanilla it's coming without google services/apps and that gapped version come with google apps included, I hope you got it
RealNBB said:
A really great ROM! I will stay with that for now!
I took the variant with GAPPS, then rooted it with Magisk.
- the installation process went completely smoothly
- Fingerprint works really well (both the setup and in previous use)...Faceunlock as well
- Android Auto works fine
- ANX camera works (at least the video mode; i used the version "ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip" and "48MPFixR_201.DullAggressiveHylaeosaurus.zip")
- 1% battery drain in 7h in flight mode
... and now an update with a working CTS profile! That would be great!
But as I said, great ROM! Thanks a lot for this!
Click to expand...
Click to collapse
Hi, thanks for your feedbacks
Well, the new release is coming, I will push it with April security patch, and also CTS I will work on it, so probably will be fixed next update
can you remove the battery icon and leave only the percentage?
if I go to "status bar items" it deletes everything and not just the icon
Hi to all, the new update has been released
It's come with April security patch and other improvement, Enjoy
lamjiidii1 said:
Hola a todos, la nueva actualización ha sido lanzada
Ha llegado con el sediento de seguridad de abril y otras mejoras, Disfrutarlo
Click to expand...
Click to collapse
Thank you very much
lamjiidii1 said:
Hi to all, the new update has been released
It's come with April security patch and other improvement, Enjoy
Click to expand...
Click to collapse
Hi. I would like to know if the ROM has a fingerprint animation
Thanks for your time and you ROM.
It's not official yet?
austick said:
Hi. Thanks this is my first asop on mi9 I use arrow on pocophone and mipad4.
I would like to know if the ROM has a fingerprint animation and don't have the mic and screenshot bug (3 fingers) like other aosp ROMs on mi9. The last question is if necessary flash fw or is include.
Thanks for your time and you ROM.
Click to expand...
Click to collapse
Hello, That's problem with weak microphone sound caused by "Google recorder" which is not included, meaning that problem is not present. Even with the "swipe with three fingers to screenshot" feature, multi-touch works, in some other ROMs this isn't there, but here everything looks fine. And also FW is included, don't need to flash anything,
There will be official support soon
lamjiidii1 said:
Hi, I'm happy that you like it
Well, I find the Al button is a little annoying, especially when it comes to accidentally touching. I think most users with the same note, I'll think about it again.
Click to expand...
Click to collapse
Hi, save me installing to find out. As a left handed user I need the back button on the right like Stock on Mi or Paranoid Android Rom.. Which way round is this one? Thanks.
lamjiidii1 said:
ArrowOS​
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
SELinux is enforcing
WiFi
Audio
RIL
GPS
Camera
Flashlight
NFC
Fingerprint on display
Vibration
Bluetooth
FM Radio
Cast
Any other thing that is not listed in the "What doesn't work" list
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
Support group
ArrowOS channel for cepheus
Changeloge
-2021/04/10
Synced with last sources
April security patch
Add Smart charge
Use pixel fingerprint
Some other improvements from ROM
HOW TO INSTALL
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
HOW TO UPDATE
update via OTA is not available yet, but will be as mush as possible
Reboot to recovery
Flash the new ROM
Flash any addons that you were using previously (GApps, Magisk...)
Reboot
DOWNLOADS
Click here to Download
Tip: choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/EcrosoftXiao/kernel_xiaomi_cepheus (big thanks to EvasiOn, without him won't be this work)
XDA:evDB Information
ArrowOS 11 for cepheus, ROM for the Xiaomi Mi 9
Contributors
lamjiidii1
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 21.3.10
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-02
Last Updated 2021-04-10
Click to expand...
Click to collapse
How do I get ArrowOS and Magisk to boot to get root?
Help... thanks
Hola, instalé la última versión de la rom tanto Vanilla como Gapps y encuentro el problema de que la aplicación Chrome se cuelga mientras navego, mi pantalla se congela y al cabo de un rato me sale un mensaje si quiero cerrar la aplicación, espérame o enviar un mensaje de error, ¿le pasa eso a otra persona?
Alguien tendría o sabría dónde descargar la versión anterior, eso estuvo muy bien para mí
De lo contrario, una muy buena rom.
----------
MOD EDIT: English Translation Below
Hello, I installed the latest version of the rom both Vanilla and Gapps and I find the problem that the Chrome application hangs while browsing, my screen freezes and after a while I get a message if I want to close the application, wait for me or send an error message, does that happen to someone else?
Someone would have or know where to download the older version, that was great for me
Otherwise a very good rom.

[discontinued] [ROM] [11] [UNOFFICIAL] Lineage-OS 18.1 [MOTO Z2 PLAY] [ALBUS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​About:
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
DISCLAIMER!
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Bugs:
I haven't noticed any.
ROM Firmware Required: ALBUS_PPS29.133-30_cid50 (Last version by Motorola, Pie 9.0)
TWRP Last Version
Download:
Lineage [Click here to download] always download the last version, latest date.
Flashing Steps:
First Time Install / Clean Flash
- Boot into recovery
- Format data and cache
- Flash Rom
- Flash Gapps if you want
- Reboot to system and enjoy
Update / Dirty Flash
- Boot into recovery
- Wipe Dalvik Cache and Cache
- Flash Rom
- Flash Gapps if you already use
- Reboot to system and enjoy
Credits:
LIneage
Pixel Experience, JeanGraff30 - For Tree
--------------------------------------------------------------------------------------------------------------------------------------
Android OS version: 11
Based on LIneage
Rom source code: https://github.com/LineageOS
Device source code: github.com/deivesj
Obrigado por disponibilizar este quarto. Estou usando normalmente e sem bugs. É um ótimo trabalho e obrigado. Sou do Rio de Janeiro, BR
Thanks for making this room available. I am using normally and without bugs. It's a great job and thank you. I'm from Rio de Janeiro, BR
So originally I was getting the following after I flashed:
“Startup Failed…device didn’t startup successfully” - something about missing firmware.
But I did not understand how strict that Android 9 ROM requirement was and wasn't actually sure I could flash that ROM first but once I did and installed the latest rom "lineage-18.1-20210714-UNOFFICIAL-albus" with "MindTheGapps-11.0.0-arm-20210412_124103" everything is working perfectly on my Moto Z2 Play, I am impressed.
This ROM deserves more attention. Rock solid, bug free, battery efficient, working encryption. Even has install script for those who prefer on screen buttons instead of fingerprint gestures. Good job.
Hi, iI have succesfully unlocked bootloader, used TWRP 3.2.3-0 to install installed Magisk 17.3, then installed the Magisk app 23.0 which updated Magisk to 23.0. Then I booted again in TWRP 3.2.3-0 (though fastboot) and try to install the July 14th version of LineageOS 18.1 for Albus. I get the Aroma installer screen, answer the question and then it says (after very short time) succesfully installed LineageOS, but after reboot It is still the Android 9.0 Motorola . In the log file I see
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : lineage-UNOFFICIAL-albus
ROM Version : 18.1
ROM Author : DeiveSJ
Device : Z2 Play
Start at : Mon Aug 16 14:39:25 2021
Installer Error (Status 255)
End at : Mon Aug 16 14:39:25 2021
Click to expand...
Click to collapse
Any suggestion? Would be really nice to run Android 11 on my device!!
EDIT: Nevermind, I noticed the TWRP 3.5.2_9-0. That solved the problem......
EDIT2: Now I end up in a bootloop.... Any suggestions?
EDIT3: Fixed bootloop by resetting to factory defaults from recovery. Nice ROM!!!
I actually found a bug with the Moto Mods projector. When battery hits 0% on the projector and starts using the battery on the phone, the projector will sporadically crash.
Is there any way to provide a fix for this? The rom is flawless except for this bug that really kills using the rom for me since I primarily use the phone for the projector.
great job perfect all function
Very nice rom! Elegant, minimalistic, fast and stable - great job, thank you!
I'm missing one function though: Moto Actions -> Fingerprint pad gestures.
@davidsonsjesus : do you think it is even possible to include this functionality in your next build?
BR!
kontemp said:
Very nice rom! Elegant, minimalistic, fast and stable - great job, thank you!
I'm missing one function though: Moto Actions -> Fingerprint pad gestures.
@davidsonsjesus : do you think it is even possible to include this functionality in your next build?
BR!
Click to expand...
Click to collapse
Fingerprint gestures worked fine for me. Maybe you chose navbar during install and that disabled them?
I've tried both configurations - fingerprint pad works just fine, it unlocks properly. What I mean is functionality included in for example Havos or AOSPext - pad can be used both with screen on and off, several actions can be defined (for swipe left or right, od longpress and so on), and it has nothing to do with my fingerprints - the pad works something like touchpad in laptop.
Moto mods 360 does not work.
Is there any way?
Hi, i've Lineage 16 on my Moto Z2, can I install this ROM or I need to install stock Pie?
Great rom, thank you so much!
I follow all steps and got stock on the lineage logo initialization, can someone please let me know how I can pass this?

Categories

Resources