Related
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.
i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.
starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking
glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy
http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.
Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.
I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.
So I picked up a screen protector on Amazon by ArmorSuit... it seemed to have solid reviews and I heard reports of great customer service, so I spent the 20 bones to pick one up. I just now applied it, and it went on well without a hitch. Since it was a wet protector and majority of my screen protector experience was with dry ones, I watched the YouTube video and also thoroughly read the instructions. Last thing I wanted to do was install a wet protector incorrectly and mess up my device.
Once done I checked out the finish. Despite the fact it's been 20 minutes and not 12-24 hours like they say to let it sit, I noticed lots of tiny scratches on it, which definitely looked like it was from the applicator card. What baffles me more is I have a microfiber cloth that came with the kit that I was wiping the screen off with... I noticed even swirly scratches after I was done, yet this microfiber cloth has nothing in it whatsoever!
Er, uh. Has anybody ran into anything like this with screen protector application?
Despite this, I'm still relatively happy with the screen protector as it fits perfectly and was very quick and easy to install. That being said, I'm still a little disappointed in what I'm seeing here, but I'd still trade hairline scratches that aren't that visibleat all (and not visible whatsoever with the screen lit up) versus air bubbles and dust pockets which clearly are visible regardless... which is almost always the case with dry protectors... Don't get me wrong, it's not like it's a series of key-gouging lines here, but when video installation guide shows the tilted tablet glaring off of the ceiling light to show it is 100% smooth and flush with a perfect glass-like surface, that's where I can see these very fine marks.
Maybe, just maybe, this is some sort of epic self-healing screen protector that'll remove those blemishes over the next day as it sits. :laugh: Yes, just maybe.
EDIT, er... uh... under the bulleted list of features I found these two items that I may have overlooked when I first purchased it:
Self-healing technology , Military grade material engineered for your specific device
ArmorSuit Lifetime Replacement Warranty *Made in the USA*
lol????
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
"burn marks" sounds about right
kpjimmy said:
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
Click to expand...
Click to collapse
I'm not sure how much more wet you can get a screen protector when it's already dripping, which was the status of it when I placed it on the screen. Likewise, I did wash my hands just prior and also had my hands both completely saturated in the provided fluid.
Burn marks sounds like some food for thought, but I'm unsure how you can get a burn mark from a microfiber cloth when I'm wiping the screen off in a circular motion. I mean, I didn't attach it to a circular sander or anything...
So in the event this magical self healing thing doesn't live up, what other screen protector would you guys recommend? I definitely want to go with a wet application, as I'm already able to tell a world of difference, but I'm a little dissatisfied with how incredibly sensitive this protector is to scratches. It's great you can take a dremel to it and it still protects the actual tablet screen but when a microfiber cloth scratches it I can't say it impresses me.
EDIT - Just got an email response from them minutes ago. The bulk of the message is pasted below:
Regarding the marks on your screen protector:
Any filmy marks, air bubbles, swirl marks or haze underneath the screen protector is due to the solution, which can take up to 2 weeks to go away. It typically doesn't take this long, but it will eventually go away because the material is designed to be breathable. This will release any trapped solution.
Regarding the scratches on your screen, here is a quick and easy fix.
1. Please turn off your device.
2. With your screen protector still on your device, spray 1 pump on the screen protector and then spread the solution evenly with the included microfiber cloth.
3. The scratches should then disappear soon, within a few days at the very most because the material is self-healing.
Click to expand...
Click to collapse
I guess I'll have to be a little more patient and see what happens.
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
slack04 said:
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
Click to expand...
Click to collapse
I thought the same thing, but once I realized that the microfiber cloth was giving swirl marks, that whole premise behind that idea kind of crumbled. If a microfiber cloth will legitimently give this screen protector swirl scratches from wiping it clean, then that's pretty fail.
That being said, I'm remaining quite optimistic about this "self healing" thing. Maybe I will see them slowly disappear? Who knows. It is a little more comforting knowing they have a lifetime guarantee, but we'll tackle that conversation when/if it ever becomes necessary. At any rate, I keep reminding myself - at least the screen protector still looks 1000% better than any dry screen protector AND it's protecting the screen in the process. :good:
cfn87 said:
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
Click to expand...
Click to collapse
I ordered the exact same 3-pack and I have to say they're great. Got it perfect on the first try and it looks crystal clear. It looks a lot better than those $10-$20 dollar protectors out there.
Sent from my Nexus 7 using xda premium
Hi everyone,
I'm planning on purchasing the Nexus 5X in a few days, just need to find the right accessories for it (cables, cases, screen protectors).
I was wondering if anyone can recommend a screen protector that has a cutout for the proximity sensor.
Also, I seriously only found out today there is such a thing as tempered glass. After researching a bit, I learned of it's pros (actually protects your screen if the phone falls) and it's cons (can crack easily for no reason ,poses somewhat of a health risk if breaks).
Pros: http://temperedglassscreenprotector.org/
Cons: http://www.clear-coat.com/blog/why-we-dont-sell-tempered-glass-screen-protectors/
Strangely, all the screen protectors I find on Amazon are tempered glass.
So, which one should I buy (tempered or plastic), and can you recommend a specific screen protector?
I wouldn't say they crack easily, but that'll depend on a bunch of variables. All I can say is it looks good and feels much nicer than the PET/non tempered glass screen protectors. Spigen is a good brand to go with.
Read the thread below:
http://forum.xda-developers.com/showthread.php?t=3214188
I recommend the skinomi screen protector, it's not glass. It's the kind that feels like rubber and applied via water. I love these.
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Hi, Im very pleased with Nexus 5X Screen Protector, Spigen® [Crystal] Full HD, I used to have it on my Nexus 5 and I was so satisfied that I bought it again for my N5x. Feels like glass, perfecly cutted you have 3x screen protector included, dust removal and positionning tool to hlelp perfect use. At least two times saved my screen on my old nexus 5. And almost nobody noticed that Im using a screen protector....
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Personally, I trust Corning Gorilla Glass 3 as sufficient in this generation. You might get a scratch or two over a few year span, but, virtually everything your phone will meet won't be hard enough to damage the glass.
Pandages said:
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Click to expand...
Click to collapse
I would love to.
Pandages said:
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
Click to expand...
Click to collapse
I don't really understand, you're talking about tempered glass screen protectors?
Pandages said:
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Click to expand...
Click to collapse
Can you give me some examples? Are the products recommended to me here (like the Spigen) multicoated?
elyashiv1994 said:
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Click to expand...
Click to collapse
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
buru898 said:
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
Click to expand...
Click to collapse
There is something that I can put in the mic to seal it? I don't want to take risk(especially when you have holes in top and bottom)
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
I've been using glass screen protectors since May 2014. I swear by them. They don't crack easily like Clear Coat claims. I've only had to replace them twice. Once because an edge got pulled up months later so there was a air gap on one side. The second time, it actually did crack but that was after falls with a TPU case on. As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does. And good ones don't shatter into little pieces like Clear Coat says. On the two replacements, I broke them fully and the pieces stay together. Also I really like the glass feel. Not sure how non-glass screen protectors feel though. Back when invisibleSHIELD was popular, that tacky feel wasn't nice.
Sent from my Nexus 5X using Tapatalk
Jill McAuliffe said:
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
Click to expand...
Click to collapse
Thanks. Does it cover the proximity sensor?
Even though the image shows it is, some companies say that despite the image, their product does not cover the sensor.
EeZeEpEe said:
They don't crack easily like Clear Coat claims. ... And good ones don't shatter into little pieces like Clear Coat says.
Click to expand...
Click to collapse
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
EeZeEpEe said:
As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does.
Click to expand...
Click to collapse
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
TheeWolf said:
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
Click to expand...
Click to collapse
Exactly. I think of it similar to a crumple zone in a car. It will absorb some of the force before the phone's glass does. Now of course, with a great amount of force like dropping it from 10 feet or throwing it, I'm sure both the screen protector and the phone's glass would break. Regular accidental drops should work out the way I described.
As for outdoor visibility, there's no noticeable decrease in brightness or increase in glare. All of the manufactures usually advertise something like 99.9% transparency.
Here's an interesting tempered glass screen protector review. Cued up exactly on the drop test to rocks and removal:
https://youtu.be/UnvC6EERMyI?t=2m21s
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
bblzd said:
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
Click to expand...
Click to collapse
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
EeZeEpEe said:
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
Click to expand...
Click to collapse
I have no background on the subject but just thinking about it logically, I don't think glass can be as protective as plastic.
For instance RhinoShield only offers plastic screen protectors. Their test videos show how easily GG would break from certain impacts and how much plastic protects it. Even the best tempered glass can only hope to be as strong as GG.
My basic understanding of the situation is glass protectors work because it breaks and saves the screen underneath, where as plastic works by actually strengthening the glass itself.
However for each time the glass protector breaks and needs to be replaced, the plastic would keep on trucking.
I think the misunderstanding arises when a user drops their phone with a glass protector and it breaks thus "saving" their screen. But what if they had plastic? Would the screen of broken then? What if they had no protector? We can't say for sure what the results would have been. However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
bblzd said:
However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
Click to expand...
Click to collapse
Right. That's how I see it as a user. Also, the clarity, feel, and scratch resistance can't be matched by plastic.
Sent from my Nexus 5X using Tapatalk
I've actually dropped my 5x naked just once so far and got lucky without any cracks, but I do believe if I had a glass SP it would've broken. In the end I think it's luck and a good case that will protect from a bad drop as the screen protector is mainly for scratch protection. I've kept my glass SP as a backup in case the factory oleophobic coating stops working as effectively.
Here.
IQ Shield LiQuidSkin - Huawei Nexus 6P Screen Protector (2015) & Warranty Replacements - HD Ultra Clear Film - Protective Guard - Extremely Smooth / Self-Healing / Bubble-Free Shield
They also have glass. Check em both.
http://www.amazon.com/B016CKR3QA/dp...055&sr=8-2&keywords=nexus+6p+screen+protector
So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Thorgoth said:
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Click to expand...
Click to collapse
I removed it because i really felt the rims when using the gestures from the sides and bottom.
Didn't notice more brightness.
I haven't removed the screen protector yet, the screen must be really hard I damaged the screen protector the first day.
I put my phone in my pocket whilst removing an ATM (legally) and it's just wrinkled the edge , with no damage to the screen at all!
The only screen protectors I've been tempted to get are on eBay and they are tempered glass privacy ones from China to the UK.
I'll update what they are like.
I removed it because i really felt the rims when using the gestures from the sides and bottom.
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
I never managed to have a perfect screen protector. You ALWAYS feel the sides of the screen protector when you slide your finger over it (for example to slide from the curved side or from the top to open the notifications). Apparently I'm overly sensitive for that
lorenzo.pierini said:
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
Click to expand...
Click to collapse
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
khoaitaychienvn said:
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
Click to expand...
Click to collapse
Why are u afraid of? Its like a screen protector but more flexible/gummy. Water is used to apply it on the screen.
don't use screen protectors at all they make you screen get worse but IF YOU NEED ONE hydro gel are weak af and don't do jack **** to protect you phone but make the screen look less worse than temped tempered are the opposite more strong but less visability
The case is the display's primary protection*.
It should be slightly raised on the edge above the display and more so on the top/bottom.
I prefer using a wet apply urethane screen protector as the are easy to place, long lasting and inexpensive.
In 2 years of using the Zizo Bolt case and Gorilla IQ Sheild on my Note 10+ there's been zero damage to the phone in spite of a lot of drop onto concrete. Try as you may, eventually they take the plunge... a good case will save them almost everytime at heights of 2-5 feet onto concrete.
*the screen protector's primary role is protection from sand scratches and then marring protection when dropped. A tempered screen may seem strong but it can directly transfer the force of an impact to the display and break it.
Glass is a witchy substance that sometimes seems to defy the laws of physics. Ask any glazier.
Some of the laws of hydraulics apply to glass. Stress on one point may be transposed to another portion of the panel. If a spot is already under stress or has been stressed, it can fracture with only a small insult.
clockwork.satan said:
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
Click to expand...
Click to collapse
I found some decent ones on MediaDevil here in the UK much better than the standard one!
maxellxl said:
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Click to expand...
Click to collapse
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
The easiest way to avoid dust ("ivisible" one as well) on screen is to go to the bathrom and turn on warm water under the shower/in the bathtub and leave it for 15 min with closed door and window (if you have it). Then go to the bathroom with your phone and apply the screen protector. I can guarantee there will be no dust under.
Well if you need a clear screen protector then you can try gadgetshieldz screen protector. I'm using it on my Find X3 Pro for 3 months now and there are no bubble issues and this goes well with a curved screen.