Database Develop

IMAK Clear LG G2 Case - My Review

Purchased this case, just got it today (2 weeks shipping to me).
I am not affiliated with the seller in any way, this is simply me documenting my experience with the case so far.
http://www.ebay.com/itm/IMAK-D802-2...DA_Cases&var=570205273984&hash=item3f2b1f8de1
I was looking for something light, cheap, snug fitting, and stylish, this case definitely fits the bill.
Lets start with the Negatives:
- the case is clear polycarbonate and is VERY prone to scratching in its current state (in my case I plan on giving it a frosted finish anyway so this doesn't really apply to my case)
- the corners of the phone are still partially exposed with this style of case in the event of drops (again I don't plan on dropping the phone )
Now The Pluses:
- Sturdy, the polycarbonate does not feel fragile or brittle at all and has some flex
- It feels a bit grippier in the hand than the stock back does
- the case edges are raised by 0.5 mm when you lay your phone face down so the screen doesn't touch the surface.
- Cheap under $6 gets the job done for me
- Light, feels alot lighter/more agile in the hand compared to the rubber case I had on it before (doesn't feel like I actually have a case on the phone now).
- Very snug fit; there is no way it is coming off the phone, you have to pry it off.
- See pics below (excuse the iphone pics..):
View attachment 2388849 View attachment 2388850 View attachment 2388851 View attachment 2388852 View attachment 2388865 View attachment 2388866 View attachment 2388867 View attachment 2388868

How do you feel this would compare to some of the more expensive cases in the market (incipio dual pro, spigen) in terms of actual drop protection?
Also, what screen protector are you using? Is that one of those tempered glass screens?

Edited. In terms of drop protection vs. incipio dual pro and spigen, the latters would be better protection, but they will also be bulkier, that is the trade off.
I have a rubber case that is more drop resistant than the IMAK case, but the IMAK is is much lighter/less bulky by comparison.
Also, what screen protector are you using? Is that one of those tempered glass screens?
Click to expand...
Click to collapse
That is the stock screen protector that ships with the phone.

sil0 said:
In terms of drop protection vs. incipio dual pro, incipio would be better protection, but it will also be bulkier than this one for sure, that is the trade off, i have a rubber case that is more drop resistant but this one is much lighter/less bulky by comparison.
That is the stock screen protector that ships with the phone.
Please edit your post and delete the quotes please, since you are first poster in the thread, thanks!
Click to expand...
Click to collapse
Edited. I had the quotes in there so you get a notification that you've received a reply.
I wanted to confirm that you really meant to say that the Incipio would have better drop protection than the Spigen and not the other way around (since you later went on to say "but" re bulk), thanks!
Are the exposed rubber portions of the Dual Pro susceptible to major lint/dust attraction? If so, is it easy to clean (I was thinking of getting the white Dual Pro to match a white G2).
Do you think there's enough room on the sides of the case to have a tempered screen protector?
Didn't realize the phone came with a well-fitting screen protector from day 1. That's pretty cool!

I have never used the Spigen or Incipio but I think its fairly safe to say all 3 cases will have enough room for current slim tempered glass screen protectors once companies figure out the curved glass edges which are currently giving screen protector manufacturers a headache.
The stock screen protector is definitely a nice touch in the interim.

rebelx said:
Edited. I had the quotes in there so you get a notification that you've received a reply.
I wanted to confirm that you really meant to say that the Incipio would have better drop protection than the Spigen and not the other way around (since you later went on to say "but" re bulk), thanks!
Are the exposed rubber portions of the Dual Pro susceptible to major lint/dust attraction? If so, is it easy to clean (I was thinking of getting the white Dual Pro to match a white G2).
Do you think there's enough room on the sides of the case to have a tempered screen protector?
Didn't realize the phone came with a well-fitting screen protector from day 1. That's pretty cool!
Click to expand...
Click to collapse
No experience with the DualPro, but they list the material as silicone.
My experience with silicone is it's a grippy material and does a good job attracting dust and having it stick to the surface. Cleaning is generally impossible unless you rinse it through some warm tap water.
I left the stock screen protector on my phone as well.

sil0 said:
I have never used the Spigen or Incipio but I think its fairly safe to say all 3 cases will have enough room for current slim tempered glass screen protectors once companies figure out the curved glass edges which are currently giving screen protector manufacturers a headache.
The stock screen protector is definitely a nice touch in the interim.
Click to expand...
Click to collapse
Definitely. My G2 is going to be coming in after black friday (at this point, there's no point in ordering now at full price) so hopefully the extra few weeks gives manufacturers some extra time to get the fit right.
yyz123 said:
No experience with the DualPro, but they list the material as silicone.
My experience with silicone is it's a grippy material and does a good job attracting dust and having it stick to the surface. Cleaning is generally impossible unless you rinse it through some warm tap water.
I left the stock screen protector on my phone as well.
Click to expand...
Click to collapse
Darn, I literally *just* placed an order for the white case. There was another poster in the forum that said that their DualPro was easy to clean by just wiping the dust/lint away. Now you're making me worry!

Looking for full body case S7 EDGE

Hello. I am looking for full body case for S7 EDGE. On my iphone 6 I'm using this case:
http://www.ebay.co.uk/itm/iPhone-6-...215370?hash=item1ead0b434a:g:LeIAAOSwu1VW5rU1
Which gives me dust and shock protection. Also is cheap. Do You know similar case for s7 edge?

Since your link was for the UK eBay, I'm linking an Amazon UK
Supcase S7 Edge Full Case
Enjoy!

I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark

jester350 said:
I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark
Click to expand...
Click to collapse
Is there screen shield on the front panel?

How about Otterbox Defender?

I am looking for case with front panel shield, not back only.

https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.

S3MyLove said:
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.
Click to expand...
Click to collapse
Woow looks very good, but a bit expensive

troxter said:
Woow looks very good, but a bit expensive
Click to expand...
Click to collapse
Looks good?
I'm sure it's very effective though.

troxter said:
Is there screen shield on the front panel?
Click to expand...
Click to collapse
nope you'll need to buy that separately if you want one

Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.

Don't buy tempered glass protection for 1+5!!

It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection

As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.

I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse

After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs

Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk

Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)

Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.

Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?

on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.

graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.

I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.

I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk

The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet

akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.

TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.

akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.

You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.

I just applied mine, best screen protector I ever had, pure quality. Quote me on that

I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?

I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?

TGSP (Tempered Glass Screen Protectors) Ideal for LOCA Installation

I contacted many AliExpress sellers and bought many TGSP's to find ones that fit the following criteria:
No ugly dot-matrix grid on the glass
No paint (black, white, gold, silver, etc) around the edges
Large cut out around the camera and sensor array at the top
Case Friendly
These are the products that I can confirm fit the criteria above:
WEIYU 3D Curved Edge Not Full Cover Tempered Glass Screen Protector For Samsung Galaxy Note 8 Protective Film Case friendly
MKSUP 3D Curved Case Friendly Full Cover Tempered Glass Screen Protector For Samsung Galaxy Note 8 Note8 Protective Glass film
IMIDO Case Friendly Tempered Glass For Samsung Galaxy Note8 3D Curved Screen Protector Protective Film For Samsung Galaxy Note 8
All three of these "different" sellers are selling THE EXACT SAME PRODUCT. All three products came in the exact same shipping styrofoam brick, exact same wipes and exact same dust/mounting stickers. All three TGSP's are identical in every way. So, just buy the cheapest one.
Click the link, then RIGHT-CLICK and OPEN IMAGE IN A NEW TAB to see the full high-res image:
Naked Phone: https://i.imgur.com/GJZjgcv.jpg
With Case: https://i.imgur.com/Ljhd8l7.jpg
Shipping time was 2-3 weeks.

All 3 has black paint at top and bottom.

lennie said:
All 3 has black paint at top and bottom.
Click to expand...
Click to collapse
There are colour options for each one right under the price - each is available in clear, as well as other colours.

Thanks for this, but the weiyu looks like it has a dot matrix . the other 2 look ok, but i bet they have the dots too. great find for the clear top and bottom though.
Ive just started a dedicated DIY thread for the LOCA install is it OK I share your links there Neo?

SquidgyB said:
There are colour options for each one right under the price - each is available in clear, as well as other colours.
Click to expand...
Click to collapse
Viewed from my phone, the color option was definitely not apparent at a glance. The "select" button seemed to be for shipping options and not for color choice.
Anyway, those are not full coverage, they leave a gap on the sides which is one thing I absolutely hate on my current install. I don't mind the gap on the top and bottom but jeez at least cover the sides....plus those rounded corners like the Whitestone domes.
But all in all good find for people who don't really mind those short comings and great price too even though it's a month long ship date. I would have probably ended up buying 1 of each to test it wasn't for the expected ship dates.

lennie said:
Viewed from my phone, the color option was definitely not apparent at a glance. The "select" button seemed to be for shipping options and not for color choice.
Anyway, those are not full coverage, they leave a gap on the sides which is one thing I absolutely hate on my current install. I don't mind the gap on the top and bottom but jeez at least cover the sides....plus those rounded corners like the Whitestone domes.
But all in all good find for people who don't really mind those short comings and great price too even though it's a month long ship date. I would have probably ended up buying 1 of each to test it wasn't for the expected ship dates.
Click to expand...
Click to collapse
Fair play - yeah, if you clicked on the lower bar, where it says "Color/Shipping cost:free shipping ... Select" I think you'd get the colour options.
I agree with the edge coverage - I prefer a "de-domed" whitestone for exactly that reason - it covers ever so slightly more on the edges than a "standard" sized TG protector. The top section is also good as it doesn't cover any of the sensors.
If anyone does find a protector that covers the edges further than a whitestone, by all means tell xda about it!

Awesome! exactly what i was looking for.
Thanks OP

SquidgyB said:
Fair play - yeah, if you clicked on the lower bar, where it says "Color/Shipping cost:free shipping ... Select" I think you'd get the colour options.
I agree with the edge coverage - I prefer a "de-domed" whitestone for exactly that reason - it covers ever so slightly more on the edges than a "standard" sized TG protector. The top section is also good as it doesn't cover any of the sensors.
If anyone does find a protector that covers the edges further than a whitestone, by all means tell xda about it!
Click to expand...
Click to collapse
I don';t believe you will ever find a glass screen protector that covers edges further than the Whitestone - and most are going to be partial coverage on the sides that you mentioned. The reason is the difficulty of getting the glass to hold firmly to the screen and not lift off when you attach a case. Cases are going to push up on the screen - if it isn't glued down with super glue it will push u p - pure physics - so you have to find a middle ground that gives you the best coverage you can find - while still holding firmly to the screen without lifting off when you put on a case....The whitestone uses the liquid adhesive to hold firmer to the screen - and thus can be used with a wider variety of cases without the lift off happening...but even with whitestone you get some lift off with some cases.... I found a great screen protector on Amazon - by "AMFILM" that holds very well - gives partial coverage on the sides and works well with a number of different cases....
I think we are have abouot the best we can get right now - Whitestone for those that want the most - and others like the AMFILM I mentioned (Or the ones in the OP) for those that don't like doing the Whitestone install....

lennie said:
All 3 has black paint at top and bottom.
Click to expand...
Click to collapse
Instructions:
Select the transparent color option.

osrix said:
Thanks for this, but the weiyu looks like it has a dot matrix . the other 2 look ok, but i bet they have the dots too. great find for the clear top and bottom though.
Ive just started a dedicated DIY thread for the LOCA install is it OK I share your links there Neo?
Click to expand...
Click to collapse
I own all of them and none of them have the dot-matrix grid. That's why I bought like 6-7 of these, just to find out myself even though I contacted each seller. However, these sellers are like "online swap meet" sellers, so I didn't trust their word.

Neo3D said:
I own all of them and none of them have the dot-matrix grid. That's why I bought like 6-7 of these, just to find out myself even though I contacted each seller. However, these sellers are like "online swap meet" sellers, so I didn't trust their word.
Click to expand...
Click to collapse
Thanks NEO are they all the same or is one better than another?

Geekser said:
I don';t believe you will ever find a glass screen protector that covers edges further than the Whitestone - and most are going to be partial coverage on the sides that you mentioned. The reason is the difficulty of getting the glass to hold firmly to the screen and not lift off when you attach a case. Cases are going to push up on the screen - if it isn't glued down with super glue it will push u p - pure physics - so you have to find a middle ground that gives you the best coverage you can find - while still holding firmly to the screen without lifting off when you put on a case....The whitestone uses the liquid adhesive to hold firmer to the screen - and thus can be used with a wider variety of cases without the lift off happening...but even with whitestone you get some lift off with some cases.... I found a great screen protector on Amazon - by "AMFILM" that holds very well - gives partial coverage on the sides and works well with a number of different cases....
I think we are have abouot the best we can get right now - Whitestone for those that want the most - and others like the AMFILM I mentioned (Or the ones in the OP) for those that don't like doing the Whitestone install....
Click to expand...
Click to collapse
i wouldn't pay $50 for Whitestone dome when I've done it my self for a fraction of the cost.
I guess the type of protector i am willing to use depends on the type of cases I use.
and I believe I've found a protector that covers the top, bottom and sides the way I would like it to....haven't installed it yet though but it's looking promising.
i'm currently using a magglass which actually covers more than the Whitestone dome but less than I wanted and it doesn't have that ugly round cut at the bottom and top like the Whitestone. i'm not the type to use bigassss ridiculous cases unless i expect my phone to fall 20ft. a moderate case will protect your phone from a 4 foot fall.
Honestly i don't really care about "wide variety" of cases, i use only a few types of cases so i could careless about the rest......just my preference.
so i absolutely refuse to find a "middle ground". I currently use the spigen neo hybrid and this new glass I have seems to fit perfectly almost no gap at bottom or sides judging from what i see (I guess I'll really know once I remove the current one and install it), i would guess the rhinoshield would also work.
As soon as they ship the glue cleaner i'll be doing the new install, probably do a video of it or something.

lennie said:
i wouldn't pay $50 for Whitestone dome when I've done it my self for a fraction of the cost.
I guess the type of protector i am willing to use depends on the type of cases I use.
and I believe I've found a protector that covers the top, bottom and sides the way I would like it to....haven't installed it yet though but it's looking promising.
i'm currently using a magglass which actually covers more than the Whitestone dome but less than I wanted and it doesn't have that ugly round cut at the bottom and top like the Whitestone. i'm not the type to use bigassss ridiculous cases unless i expect my phone to fall 20ft. a moderate case will protect your phone from a 4 foot fall.
Honestly i don't really care about "wide variety" of cases, i use only a few types of cases so i could careless about the rest......just my preference.
so i absolutely refuse to find a "middle ground". I currently use the spigen neo hybrid and this new glass I have seems to fit perfectly almost no gap at bottom or sides judging from what i see (I guess I'll really know once I remove the current one and install it), i would guess the rhinoshield would also work.
As soon as they ship the glue cleaner i'll be doing the new install, probably do a video of it or something.
Click to expand...
Click to collapse
Its awesome you found what you wanted - can you share a link?

Geekser said:
Its awesome you found what you wanted - can you share a link?
Click to expand...
Click to collapse
Yeah, this is the one I bought recently but haven't installed yet.
https://www.amazon.com/gp/product/B075CZV6YQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&th=1
Note, if you use big cases or cases with weird lips I highly doubt this protector will fit unless the case's lip goes over the protector (my idea is that if the case fits over the protector then it won't push it up). I don't use bulky cases so that's not really a concern to me....... here wondering if the rhinoshield case would really fit even though it has a deep lip but so far I think it would as i assume the protector would go under the lip.
as soon as amazon ships a couple things to me I'll be doing the install and some tests and to see how it fits with this waterproof case i'm buying.

I got this one Check this out at Amazon.com
Galaxy Note 8 Tempered Glass Screen, 0.33mm 9H 3D Full Coverage edge to edge fingerprint screen protector for Samsung Galaxy Note 8 https://www.amazon.com/dp/B0759V5CVS/ref=cm_sw_r_other_apa_JUWVzb0E5WFFQ
For one it went as close to edge to edge as I could find. It does have the dot matrix but it's not noticeable. It also covers most of the top and I'll post pics here
Sorry ignore these pics wrong ones

Here are the correct pics

osrix said:
Thanks NEO are they all the same or is one better than another?
Click to expand...
Click to collapse
They're all the same. My friend and I had a geek out party on Saturday and did DIY LOCA install on our phones. These feel as good as the OEM. S Pen works as good as OEM.

Neo3D said:
They're all the same. My friend and I had a geek out party on Saturday and did DIY LOCA install on our phones. These feel as good as the OEM. S Pen works as good as OEM.
Click to expand...
Click to collapse
What LOCA did you buy? I am sure the coverage capability depends on the viscosity and set capability.

hx4700 Killer said:
What LOCA did you buy? I am sure the coverage capability depends on the viscosity and set capability.
Click to expand...
Click to collapse
We ordered this: http://www.ebay.com/itm/50ml-Super-...-adhesive-for-Cell-Phone-Screen-/311578428856
We took the screen dimensions of the display and multiplied it by the thickness of the TGSP, so we got cubic millimeters. Then, converted that to milliliters and used an old teeth whitening syringe I had lying around to use the correct amount of LOCA. We used thin, clear packaging tape to seal the buttons and holes.

Neo3D said:
We ordered this: http://www.ebay.com/itm/50ml-Super-...-adhesive-for-Cell-Phone-Screen-/311578428856
We took the screen dimensions of the display and multiplied it by the thickness of the TGSP, so we got cubic millimeters. Then, converted that to milliliters and used an old teeth whitening syringe I had lying around to use the correct amount of LOCA. We used thin, clear packaging tape to seal the buttons and holes.
Click to expand...
Click to collapse
Did it make a big difference compared to a non-LOCA install of the TGSP's you listed?

Minimalist case that provides good corner drop protection

I owned a Nokia 8 a couple of years back and one of my favourite things about it was the CC-801 case - a bit like the OnePlus Sandstone case but even more minimalist with exposed sides and just a back and corner protection.
Was never able to find anything similar for my OnePlus 6 so settled on the Sandstone and was generally pretty happy with it.
However, I purchased an OP7T a few days ago and was pleasantly surprised when I came across the following on Amazon UK
OnePlus 7T Case, Ultra Slim Frosted Transparent
It arrived this afternoon and whilst it may not be quite as slim as the CC-801 or the Sandstone, I think I am going to like it a lot.
The sides are not covered but the top and the corners get decent chunky protection - much more than a Sandstone.
The black disc on the back is my own magnetic one...

Got a similar case with black edges. Feels like holding the phone naked. Btw - Where did you get your tempered glass from?

The SP is Omoton glass from Amazon UK. It is 1-2mm too wide. I complained to them and they promised to offer a smaller version in the next few days on Amazon UK.
Where did you get your case - does the back offer great grip?

mayankkhajnchi said:
Got a similar case with black edges. Feels like holding the phone naked. Btw - Where did you get your tempered glass from?
Click to expand...
Click to collapse
Update: they have now added a newer slightly narrower version which should no longer have the halo effect.
I have ordered the newer one - and will let you know if they fixed the size issue once I receive it.

I have GESMA from amazon and it looks and feels so good. The buttons also feels nice and are well marked. The corners look like they can survive drops, but will see about that. The rear camera is also nicely protruded by a milimeter

how is the case holding up?

I recommend Caseology Vault. Perfect minimalist case that provides very good protection both front and camera cutout, looks so elegant as well

worm_guard said:
how is the case holding up?
Click to expand...
Click to collapse
Hi, I am guessing the question was directed at me.
I did use the case for a few weeks - but I missed the OnePlus Sandstone case that I had used with my previous OP6.
So, when I managed to get hold of a Sandstone case cheap I switched to that.
Still happy with the case and it does provide more protection than the Sandstone - but I had used the Sandstone for so long I just ended up switching back.

Rhinoshield CrashGuard
Wysłane z mojego HD1903 przy użyciu Tapatalka

aleck0112 said:
I recommend Caseology Vault. Perfect minimalist case that provides very good protection both front and camera cutout, looks so elegant as well
Click to expand...
Click to collapse
I agree. Excellent balance of form and function and very good camera protection, yet not at all bulky. Overall, I think it's the best of the three cases I've tried.

GeekOnTheHill said:
I agree. Excellent balance of form and function and very good camera protection, yet not at all bulky. Overall, I think it's the best of the three cases I've tried.
Click to expand...
Click to collapse
Looks Good Will Give it A Try :good:

GeekOnTheHill said:
I agree. Excellent balance of form and function and very good camera protection, yet not at all bulky. Overall, I think it's the best of the three cases I've tried.
Click to expand...
Click to collapse
Could you please share a photo to show how much does it protect the front side? Like you did with the card on camera lens?
Sent from my OnePlus7T using XDA Labs

niyonsv said:
Could you please share a photo to show how much does it protect the front side? Like you did with the card on camera lens?
Sent from my OnePlus7T using XDA Labs
Click to expand...
Click to collapse
Sure thing.
These are with the Supershieldz tempered glass screen protector (0.32mm).

I have the Nilkin Frosted Shield in black and love it .
#Aliexpress US $7.99 20%OFF | OnePlus 7 case cover NILLKIN Frosted PC Matte hard back cover Gift Phone Holder one plus For Oneplus 7 pro case oneplus 7t case
https://a.aliexpress.com/_d6tO47J

This guy does a lot of case reviews for OnePlus phones, here is the one on the Caseology Vault
https://www.youtube.com/watch?v=IvjCN8rWN1M

I know this thread is dead but for future people looking for a super solid and sexy option for a minimalist 7T case that also is built from some of the strongest material on Earth we have this:
It's a full Kevlar minimalist case. Comes in two color patterns, black and gray twill and this red and black twill. I think the red and black looks amazing. It's obviously not the most protective case but when paired with a shatterproof screen protector such as the rhino shield impact skin, your phone is in good hands. Since it's kevlar, it can take some pretty devastating hits and keep your phone safe. I highly recommend, I have two of them for a backup when my first one gets too ugly from abuse.

This one:
Amazon.com: ZIZO Bolt Series OnePlus 7 Pro Case | Military-Grade Drop Protection w/Kickstand Bundle Includes Belt Clip Holster + Lanyard Blue Black : Cell Phones & Accessories
Amazon.com: ZIZO Bolt Series OnePlus 7 Pro Case | Military-Grade Drop Protection w/Kickstand Bundle Includes Belt Clip Holster + Lanyard Blue Black : Cell Phones & Accessories
www.amazon.com
May not be compatible with the 7t variant. I don't know this phone's product line specs. One may be released for your phone in the future if this one doesn't work for your model.
The Bolt is the only case I use on my Note 10+.
Thin, easy to hold and it has soaked up repeated falls onto concrete with zero damage.
I use Gorilla IQ Sheild for a screen protector; easy to apply, inexpensive and long lived.
Both have done well keeping my 10+ from harm without spending more than $30*.
*on my 2nd Bolt case because of repeated hard drops. No visible damage to the case but out of an abundance of caution about possible corner fatigue retired the first one. Better safe than sorry.
At $20 a pop it's a no brainer.

1dopewrx05 said:
I know this thread is dead but for future people looking for a super solid and sexy option for a minimalist 7T case that also is built from some of the strongest material on Earth we have this:
It's a full Kevlar minimalist case. Comes in two color patterns, black and gray twill and this red and black twill. I think the red and black looks amazing. It's obviously not the most protective case but when paired with a shatterproof screen protector such as the rhino shield impact skin, your phone is in good hands. Since it's kevlar, it can take some pretty devastating hits and keep your phone safe. I highly recommend, I have two of them for a backup when my first one gets too ugly from abuse.
Click to expand...
Click to collapse
Where did you get it!?

de4th8rinGer said:
Where did you get it!?
Click to expand...
Click to collapse
You can grab it right here:
Amazon.com: kalibri Aramid Fiber Case Compatible with OnePlus 7T - Case Super Slim Strong Protective Phone Cover - Red Matte/Black
Amazon.com: kalibri Aramid Fiber Case Compatible with OnePlus 7T - Case Super Slim Strong Protective Phone Cover - Red Matte/Black
www.amazon.com
Case is still holding up great, very resistant to daily use. Not a flawed resin on the aramid fiber like there is on some brands of carbon/aramid fiber cases