Hello everyone so I have a Samsung galaxy M21 with One UI 3.1 core. Are there any lineage OS official or unofficial builds for Android 11? If you know please reply to this, thank you in advance!!!
Join telegram
they have CrDroid android 11
sinkoo1979 said:
Join telegram
they have CrDroid android 11
Click to expand...
Click to collapse
Thanks so much I'll join the telegram channel.
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
GuruPrasadAH said:
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
Click to expand...
Click to collapse
Any GSI you will recommend? (for M215G)
OldNoobOne said:
Any GSI you will recommend? (for M215G)
Click to expand...
Click to collapse
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
GuruPrasadAH said:
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
Click to expand...
Click to collapse
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
OldNoobOne said:
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
Click to expand...
Click to collapse
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Bro thanks so much, I will try your steps and tell you what happens ok
GuruPrasadAH said:
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Click to expand...
Click to collapse
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
OldNoobOne said:
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
Click to expand...
Click to collapse
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
GuruPrasadAH said:
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
Click to expand...
Click to collapse
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
OldNoobOne said:
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
Click to expand...
Click to collapse
Just a few clarifications:
1. I only made the flasher zip for the vbmeta. The image itself - was provided by google.
2. This zip should and will probably work on all phones, except maybe a few with weird vbmeta partition name( samsung vbmeta partition name is actually vbmeta_samsung instead of vbmeta only, and I think LG does the same too).
If it does not work( shows failed msg ) then send me the link of that device's twrp. I will maybe make an update if i find time.
Chill
GuruPrasadAH
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
GuruPrasadAH said:
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
Click to expand...
Click to collapse
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
OldNoobOne said:
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
Click to expand...
Click to collapse
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
GuruPrasadAH said:
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
Click to expand...
Click to collapse
Thanks bro, t.me is crazy with bots monitoring everything. Its not very secure as per me coz it downloads unwanted things to our device. It feels like as if soviet kgb is watching every group we join LOL.
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Fredin_ said:
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Click to expand...
Click to collapse
Hi Fredin bro, long time ..how you been? Youre the most helpful nice guy in t.me
My Redmi Note 10 came with MiUi 12.5.1 Android 11 out of the box, in these two months that ive been using Nebrassy2-Twrp and its different than Soulr344-Twrp, (Soulr344-Twrp 'super ' command = Nebrassy2-Twrp '#su' command), I couldnt flash GSIs using ( TWRP-3.5.2-mojito-Nebrassy-2.img ) so far.
Ive requested Soulr344 dev to make Soulr344-Twrp for RN10 Mojito/Sunny. If he ever drops by XDA perhaps he might notice.
Related
Android Version : 9/10 Modified Flashable Boot & Vender.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following three files to Test GSI s on Mi Max 2 (Oxygen). This is ported/Made with many patches and customized from various sources. Most GSI maybe Stable enough for your daily use on Mi Max 2.
1a. Treble Mi Max 2 Recovery 3.2.1 https://drive.google.com/file/d/171xg-c57grzI_eaguBRd5BBMMRfDEb18/view?usp=drivesdk
1b. OrangeFox Recover 10
I do not recommend as it likes to mess with the already modified boot & vendor.
2. GSI-Vendor-Boot-Oxygen-Hillbilly-Patched-For-MM2-Oxygen-By-liammc.zip
https://drive.google.com/file/d/1716FYaRjtrg2mQoOuFAZbjI7weFcGTHi/view?usp=drivesdk
3. Any ARM 64 General System Image A ONLY.
https://mirrors.lolinet.com/firmware/gsi/
Or
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
I have test over 90% of available GSI and all are booting.
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Cache, and Dalvick cache.
Second Step:
Selecting Wipe > Format data and then typing yes.
Third step:
Flash GSI-Vendor-Boot-Oxygen-Hillbilly-Patched-For-MM2-Oxygen-By-liammc.zip
Fourth step:
Using the GSI of your choice,
Tap on “Install
Change the type from “zip” to “image.”
Find and select the GSI you downloaded.
Choose to flash to the system partition.
Once that is done, reboot your device directly back into recovery.
Fifth Step:
Tap wipe > Advanced Wipe > Click the box next to system> tap "Repair or change file system" > Tap resize file system.
Sometimes it doesn't work and throws and error. The first time, Just reboot back into recovery and do it again and it will.
Depending on which GSI you may want to flash gapps, which can be flashed anytime.
Then reboot into system.
No need to flash root as all is included, Just connect to the internet and load up magisk.
In most cases
please allow 1-5 Minutes for first boot.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max HDD at any one given time, And working on many projects. If you can afford it, Im trying to save for a used computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits.
Best of Luck and Happy Flashing )
Has this rom microg support? Thank you.
Great work Buddy. Hopefully someone will fix camera
RayfG said:
Has this rom microg support? Thank you.
Click to expand...
Click to collapse
Dependson which GSI you chose, But most will, as long as the GSI doesn't have gapps incorporated.
liammc83 said:
Dependson which GSI you chose, But most will, as long as the GSI doesn't have gapps incorporated.
Click to expand...
Click to collapse
Thank u, i'll try this.
RayfG said:
Thank u, i'll try this.
Click to expand...
Click to collapse
Many options to try. Most gsi, depending on there sources will boot, but most importantly most features will work.
Highly appreciate your hard work mate cheers
reversegear said:
Great work Buddy. Hopefully someone will fix camera
Click to expand...
Click to collapse
Is there any problem with camera?
nikhil34a said:
Is there any problem with camera?
Click to expand...
Click to collapse
Absolutely, 100%, yes.
liammc83 said:
Absolutely, 100%, yes.
Click to expand...
Click to collapse
I will still flash it. Appreciate your hard work. ?
liammc83 said:
Many options to try. Most gsi, depending on there sources will boot, but most importantly most features will work.
Click to expand...
Click to collapse
Thank u for your outstanding performance here.?
Big thanks for creating
So all of those option (except for amr32) will boot on a healty installation? I havent Heard of GSI ever thx for sharing liammc83
slash1432422 said:
So all of those option (except for amr32) will boot on a healty installation? I havent Heard of GSI ever thx for sharing liammc83
Click to expand...
Click to collapse
Gsi or general system images are the future. No more waiting for custom ROMs, or ports, IF the source and gsi is created properly.
As long as it's arm 64 a only, most will work depending on the source created.
So far oxygenos is having great reviews including supporting jio volte, ect.
Can you explain step by step instructions for how to do MIUI 11 EU port?
I join u
zavorotnii said:
Can you explain step by step instructions for how to do MIUI 11 EU port?
Click to expand...
Click to collapse
I also wish to learn it ,but got only an old PC with windows with zero knowledge on making roms...,but good at using and changing them:laugh:
---------- Post added at 09:18 AM ---------- Previous post was at 08:55 AM ----------
So its a android 10 rom right?? With vendor and booting
It's a base to create or port the other roms for our mi max 2...? Am i making any sense with this??
.can someone share me a little basic knowledge of this to me ,so that I might be knowing what iam doing and whats the use of doing this
Bro Tried many times Oxygen OS A GSI. Always gets struck at boot logo. AM i doing something wrong? I have tried your guide multiple times. But not booting.
What the difference between Aonly and AB GSI images?
---------- Post added at 12:24 PM ---------- Previous post was at 12:14 PM ----------
As I understand For Xiaomi Mi Max 2 we need to use Aonly GSI images
chandruilkal said:
Bro Tried many times Oxygen OS A GSI. Always gets struck at boot logo. AM i doing something wrong? I have tried your guide multiple times. But not booting.
Click to expand...
Click to collapse
Same here. I tried OOS 9 A only image.
I think it has something to do with permissiver.zip file. I'll try again with it and update you.
chandruilkal said:
Bro Tried many times Oxygen OS A GSI. Always gets struck at boot logo. AM i doing something wrong? I have tried your guide multiple times. But not booting.
Click to expand...
Click to collapse
Well it defiantly works.
You flash the hillbilly vender & boot zip ?
You format data, not wipe, but format ?
You resize system partition ?
You don't flash magisk, a modified version is included.
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the ArrowOS for OnePlus 6t
Click to expand...
Click to collapse
Installation instructions
1. Install R Stock Rom onto your phone , follow some tutorial you can find in this forum
2. Flash boot.img and dtbo.img by typing fastboot flash boot boot.img and fastboot flash dtbo_a dtbo.img and fastboot flash dtbo_b dtbo.img
3. Wipe your userdata by typing fastboot erase userdata
4. Reboot the phone and immeditly do the recovery key combination
5. In Lineageos recovery select install and then sideload from adb
6. On your computer type adb sideload pathtotheromzip and press enter
7. The rom should now be flashed , flash gapps and other mods like magisk the same way
Click to expand...
Click to collapse
Download
ROM
RECOVERY
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:08.11.2021
[note] 2nd Release of ArrowOS 12.0
[new] Audio works now , wifi works now , userdebug build
[changed] userdebug build now
[fixed] audio wifi
Older changelogs:
Click to expand...
Click to collapse
Code:
Current changelog:05.11.2021
[note] 1st Release of ArrowOS 12.0
[new] Android 12 R
[changed]
[fixed] Rom boots into OS
FAQ
What doesnt work ?
fingerprint,,and maybe others
This rom is for fajita only
VOLTE DONT WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@LuK1337
Sources
Code:
[URL="https://github.com/J0SH1X/android_kernel_oneplus_sdm845"]Kernel[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_sdm845-common"]Common[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_fajita"]Device[/URL]
[URL="https://github.com/J0SH1X/proprietary_vendor_oneplus"]Vendor[/URL]
Wow first 12 build. But will be wait till fixing things by dev as described. Best of luck.
omg this is a good start
Thanks waiting
I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.
That's a good start.
digidude512 said:
I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.
Click to expand...
Click to collapse
you dont , the rootfs.tar.gz is for running full desktop ubuntu on oneplus 6t
small update audio is fixed wait for next build maybe even more till then
J0SH1X said:
small update audio is fixed wait for next build maybe even more till then
Click to expand...
Click to collapse
wifi fixed fp kinda works but not quite yet
Don't understand this thing
The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.
koobie777 said:
The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.
Click to expand...
Click to collapse
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?
New Release with fixed audio and wifi bt audio may or may not work , also fingerprint sensor will be detected now but it fails to illuminate the sensor so systemui will crash
Release fajita-20211108 · J0SH1X/Lineage-OTA
host for json response file for supporting ota updates on unoffcial lineageos || EOL FIND ANOTHER IDIOT TO DO YOUR **** - Release fajita-20211108 · J0SH1X/Lineage-OTA
github.com
J0SH1X said:
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?
Click to expand...
Click to collapse
Yeah it booted to OnePlus recovery, your instructions though mention using the recovery buttons command I tried vol. Down + power but I also tried just booting to recovery from bootloader, both booted to OnePlus recovery. I'll try to flash boot to both slots tonight. Testing out PE A12 GSI today while I'm at work. I'll have to MSM back to stock first to try your build out. I'll also test out bugs if I get it to boot and throw a logcat up.
Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there
Tushi001 said:
Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there
Click to expand...
Click to collapse
LineageOS 19 - OnePlus 6T
Group to discuss about the Alpha Builds of LineageOS 19 based on Android 12 for the OnePlus 6T.
t.me
Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.
Happy to see arrow OS on fajita! thank you
MrUrgit said:
Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.
Click to expand...
Click to collapse
okay can you maybe provide logs or so , i dont see any iusse with wifi anymore
Did Google open source wallpaper based color themeing? I didn't keep a track recently and wanted to know id its included in custom roms like this one.
Please note that it is not mine if you are here, it means you know what you are doing and are solely responsible for what you are doing.
I see some users can't find twrp for this device and some links are broken. So I share here the last unofficial twrp developed by skkk. All credits and thanks goes to him.
If you have no recovery yet and you are not rooted, you need to use the usual adb commands: fastboot boot <twrp.img>
If you're rooted, you can use the official twrp app[https://play.google.com/store/apps/details?id=me.twrp.twrpapp ] Grant him root rights and flash the twrp image or flash directly from recovery for an update...
Download link
128 MB file on MEGA
mega.nz
or unzip this file to have twrp.img
*update January 15, 2023 (twrp.V-6.8)
*update January 17, 2023 (twrp.V-6.9)
*update January 18, 2023 (twrp.V-7.0)
*update January 30, 2023 (twrp.V-7.1)
*update February 2, 2023 (twrp.V-7.2)
*update april 25 , 2023 (twrp.V-7.7)
Thanks ............
thanks for sharing and caring for us user of mi 10t/pro
If you have problem with data decryption please use this version twrp (credit to lilydess) and Flash DFE after your ROM.
Although it's version 3.6.2 seems to work better especially on A13 which has even more restrictions than A12.
Note : Unzip this file you will have Twrp.img+DFE.zip
• EROFS Support
• September 8th 2022
• Source Code
Commits · lolipuru/twrp_device_xiaomi_apollo
Contribute to lolipuru/twrp_device_xiaomi_apollo development by creating an account on GitHub.
github.com
Full House said:
If you have problem with data decryption please use this version twrp (credit to lilydess) and Flash DFE after your ROM.
Although it's version 3.6.2 seems to work better especially on A13 which has even more restrictions than A12.
Note : Unzip this file you will have Twrp.img+DFE.zip
Click to expand...
Click to collapse
thanks a lot for this, more powerrr to you sir
abrakadabraham said:
thanks a lot for this, more powerrr to you sir
Click to expand...
Click to collapse
Thank you for being grateful, many here are not grateful more than 100 people have downloaded not even 10 people thanked that's how human ingratitude.
nice work bro keep it up
Full House said:
Please note that it is not mine if you are here, it means you know what you are doing and are solely responsible for what you are doing.
I see some users can't find twrp for this device and some links are broken. So I share here the last unofficial twrp developed by skk. All credits and thanks goes to him.
If you have no recovery yet and you are not rooted, you need to use the usual adb commands: fastboot boot <twrp.img>
If you're rooted, you can use the official twrp app[https://play.google.com/store/apps/details?id=me.twrp.twrpapp ] Grant him root rights and flash the twrp image or flash directly from recovery for an update...
Download link
128 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
Thanks a lot!!
Thank you so much, thanks for sharing useful TWRP.
Thanks for this amazing recovery
Can it decrypt data on android 12? or even android 13? D:
Yes
plakonn said:
Can it decrypt data on android 12? or even android 13? D:
Click to expand...
Click to collapse
I recommend skk twrp for A12 roms and miui based roms it can decrypt but for A13 lilydess twrp is recommended.
big thanks to you, other recovery thit not stick got twrp bootloop this recovery works super europe xiaomi MI 10 t pro 5G thanks very happy
Full House said:
I recommend skk twrp for A12 roms and miui based roms it can decrypt but for A13 lilydess twrp is recommended.
Click to expand...
Click to collapse
where i can get lilydess twrp? (edit: i mean, from where did you get it?) i cant find it
edit2: it can rly decrypt storage, right? so i can use it without dfe and just write pin into twrp (or remove pin before rebooting to twrp)
plakonn said:
where i can get lilydess twrp? (edit: i mean, from where did you get it?) i cant find it
edit2: it can rly decrypt storage, right? so i can use it without dfe and just write pin into twrp (or remove pin before rebooting to twrp)
Click to expand...
Click to collapse
on telegram.
It depends on the ROM so yes in some cases no need for DFE flash if the ROM does not force encryption.
Yes you can boot to twrp with lock enabled.
Full House said:
on telegram.
It depends on the ROM so yes in some cases no need for DFE flash if the ROM does not force encryption.
Yes you can boot to twrp with lock enabled.
Click to expand...
Click to collapse
so there is no way i can have force encryption and twrp at the same time? (i need encrypted storage but i would like too keep ability to flash zips, ota updates etc. Can pixel experience recovery do it? (with lockscreen pin removed) i mean using pc "adb sideload" command...
plakonn said:
so there is no way i can have force encryption and twrp at the same time? (i need encrypted storage but i would like too keep ability to flash zips, ota updates etc. Can pixel experience recovery do it? (with lockscreen pin removed) i mean using pc "adb sideload" command...
Click to expand...
Click to collapse
I only use twrp ask pixel dev experience.
Anyway some recommend the use of their recovery even if it works with twrp this is due to the fact that there is no official twrp for Apollo.
indeed even if twrp cannot access internal data we can always use adb sideload or usb otg to flash what you want, the only problem in this case will be to access to data/adb/modules in case of bootloop and no twrp backup.
So bootloops caused by magisk module are solved how? By formatting everything?
Full House said:
I only use twrp ask pixel dev experience.
Anyway some recommend the use of their recovery even if it works with twrp this is due to the fact that there is no official twrp for Apollo.
indeed even if twrp cannot access internal data we can always use adb sideload or usb otg to flash what you want, the only problem in this case will be to access to data/adb/modules in case of bootloop and no twrp backup.
Click to expand...
Click to collapse
I dont want to annoy you any more... Is there any guide for this? (how to work with this kind of twrp?). I'm lowkey confused by the fact i can flash from otg but at the same time i can not view storage. ( i managed to destroy system once i tried to flash somethin so i started using DFE.zip but now i need encryption for work app...)
i used to know how it works but i forgot. Thanks for help 🫡
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Please note that: this will void your warranty.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUGS
-Finger Print sensor NOT working
-Sim 2 Slot NOT working
-Notifications may be delayed
That's all i know, let me know if you find any more bugs.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What do you need to flash?
1. Must have an unlocked bootloader and have some custom romming knowledge.
2. Download the TWRP, VBMETA and boot.img, should be down in the thread.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How do I flash?
Put your phone in download mode and open odin, there you will click on AP and put your TWRP, after that put your VBMETA Disabler in the USERDATA slot.
After your done flashing the TWRP, shut off your device and hold POWER and VOLUME UP untill you boot into the TWRP.
Once you're in, go to wipe-format data-type yes.
Flash the boot.img ( IMPORTANT )
Flash the MultiDisabler
And now flash the GSI, I will be using the Pixel Experience 13.0 GSI https://github.com/ponces/treble_build_pe/releases ( BIG THANKS TO PONCES ON GITHUB FOR MAKING IT <3 )
After you're done flashing the GSI, reboot and you should be done.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CREDITS!
https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539 ( from here i got the twrp, multidisabler and boot.img )
https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a71-snapdragon.4350893/ ( from here i got the VBMETA Disabler )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIRST TIME MAKING A POST! SO PLEASE TELL ME WHAT I CAN DO TO IMPROVE! <33
IF YOU BRICK YOUR DEVICE I WILL ACTUALLY TRY TO HELP YOU UNBRICK IT NO MATTER WHAT!
honestly, I'm not flashing Android 13 on my device so does it work on android 12 or 11 vendors?
No android 13 GSI boots on this a71 for me.
Also FOD will most likely NOT work since PHH had backed away from gsi development, so it's trebledroid based most likely, which will have more bugs and less stable overall.
Also I can't flash Faizauthar's kernel on A13 anymore.
S8hype said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Please note that: this will void your warranty.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUGS
-Finger Print sensor NOT working
That's all i know, let me know if you find any more bugs.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What do you need to flash?
1. Must have an unlocked bootloader and have some custom romming knowledge.
2. Download the TWRP, VBMETA and boot.img, should be down in the thread.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How do I flash?
Put your phone in download mode and open odin, there you will click on AP and put your TWRP, after that put your VBMETA Disabler in the USERDATA slot.
After your done flashing the TWRP, shut off your device and hold POWER and VOLUME UP untill you boot into the TWRP.
Once you're in, go to wipe-format data-type yes.
Flash the boot.img ( IMPORTANT )
Flash the MultiDisabler
And now flash the GSI, I will be using the Pixel Experience 13.0 GSI https://github.com/ponces/treble_build_pe/releases ( BIG THANKS TO PONCES ON GITHUB FOR MAKING IT <3 )
After you're done flashing the GSI, reboot and you should be done.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CREDITS!
https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539 ( from here i got the twrp, multidisabler and boot.img )
https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a71-snapdragon.4350893/ ( from here i got the VBMETA Disabler )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIRST TIME MAKING A POST! SO PLEASE TELL ME WHAT I CAN DO TO IMPROVE! <33
Click to expand...
Click to collapse
Also, what is the source of your boot.img file?
TigerLake said:
honestly, I'm not flashing Android 13 on my device so does it work on android 12 or 11 vendors?
No android 13 GSI boots on this a71 for me.
Also FOD will most likely NOT work since PHH had backed away from gsi development, so it's trebledroid based most likely, which will have more bugs and less stable overall.
Also I can't flash Faizauthar's kernel on A13 anymore.
Click to expand...
Click to collapse
Actually, I tried PE 13 on Android 12 vendor and it worked fine except for :- sim2 and fingerprint.
Which is quite common in GSI...
Edit :- also faced delayed notifications, which I still face even in samsung android 13 original firmware
S8hype said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Please note that: this will void your warranty.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUGS
-Finger Print sensor NOT working
That's all i know, let me know if you find any more bugs.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What do you need to flash?
1. Must have an unlocked bootloader and have some custom romming knowledge.
2. Download the TWRP, VBMETA and boot.img, should be down in the thread.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How do I flash?
Put your phone in download mode and open odin, there you will click on AP and put your TWRP, after that put your VBMETA Disabler in the USERDATA slot.
After your done flashing the TWRP, shut off your device and hold POWER and VOLUME UP untill you boot into the TWRP.
Once you're in, go to wipe-format data-type yes.
Flash the boot.img ( IMPORTANT )
Flash the MultiDisabler
And now flash the GSI, I will be using the Pixel Experience 13.0 GSI https://github.com/ponces/treble_build_pe/releases ( BIG THANKS TO PONCES ON GITHUB FOR MAKING IT <3 )
After you're done flashing the GSI, reboot and you should be done.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CREDITS!
https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539 ( from here i got the twrp, multidisabler and boot.img )
https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a71-snapdragon.4350893/ ( from here i got the VBMETA Disabler )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIRST TIME MAKING A POST! SO PLEASE TELL ME WHAT I CAN DO TO IMPROVE! <33
Click to expand...
Click to collapse
TigerLake said:
honestly, I'm not flashing Android 13 on my device so does it work on android 12 or 11 vendors?
No android 13 GSI boots on this a71 for me.
Also FOD will most likely NOT work since PHH had backed away from gsi development, so it's trebledroid based most likely, which will have more bugs and less stable overall.
Also I can't flash Faizauthar's kernel on A13
TigerLake said:
honestly, I'm not flashing Android 13 on my device so does it work on android 12 or 11 vendors?
No android 13 GSI boots on this a71 for me.
Also FOD will most likely NOT work since PHH had backed away from gsi development, so it's trebledroid based most likely, which will have more bugs and less stable overall.
Also I can't flash Faizauthar's kernel on A13 anymore.
Click to expand...
Click to collapse
i think it will work!
Click to expand...
Click to collapse
TigerLake said:
Also, what is the source of your boot.img file?
Click to expand...
Click to collapse
i got the boot.img from this thread https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539
SolitaryRockzy said:
Actually, I tried PE 13 on Android 12 vendor and it worked fine except for :- sim2 and fingerprint.
Which is quite common in GSI...
Edit :- also faced delayed notifications, which I still face even in samsung android 13 original firmware
Click to expand...
Click to collapse
thanks for telling me! i will add these bugs to the bug section
S8hype said:
i got the boot.img from this thread https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539
Click to expand...
Click to collapse
oh lol, thats the stock boot.img, the only boot.img with at least some compatibility with gsis. Others just boot to fastboot....
SolitaryRockzy said:
Actually, I tried PE 13 on Android 12 vendor and it worked fine except for :- sim2 and fingerprint.
Which is quite common in GSI...
Edit :- also faced delayed notifications, which I still face even in samsung android 13 original firmware
Click to expand...
Click to collapse
early adopter tax.
A13 is still very buggy on this phone, so I don't really recommend it. Will port A13 roms when things get a little more stable....
SIM2 works on A12
Plus the brightness bug on gsis with Android 12 vendor, this is why I am still clinging to A11 vendor (bit sv rev 8, downgraded from Android 13 vendor). Samsung just makes things worse and worse...
TigerLake said:
early adopter tax.
A13 is still very buggy on this phone, so I don't really recommend it. Will port A13 roms when things get a little more stable....
SIM2 works on A12
Plus the brightness bug on gsis with Android 12 vendor, this is why I am still clinging to A11 vendor (bit sv rev 8, downgraded from Android 13 vendor). Samsung just makes things worse and worse...
Click to expand...
Click to collapse
Does Sim 2 work on GSIs for you? I was unable to hear or speak on calls using Sim 2 when I was using PE12
found some bugs a71
So i cant find a signal neither on sim 1 nor sim 2 and the top speaker doesnt work thats it for now but other than that it does work... thanks for this tutorial
Edit: I can call and receive calls but it still doesnt show a signal
The latest build of PE 13 has plus version in it. And the FOD is working now.
I'll try the latest one
S8hype said:
IF YOU BRICK YOUR DEVICE I WILL ACTUALLY TRY TO HELP YOU UNBRICK IT NO MATTER WHAT!
Click to expand...
Click to collapse
Can I flash it over One UI 5.0? Or do I need to downgrade stock firmware first?
Bro need some help
I installed it on my a71 but seems that the brightness of the device is broken, how can I fix it?
Also as I tested the Bluetooth isn't working, even I try to enable it in Phh Treble Settings, btw the brightness is fixed by opening Phh Treble Settings, but the Bluetooth problem have been make me a tons of problems, like I can't really use my Bluetooth headphones, please some expert can help me
S8hype said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Please note that: this will void your warranty.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUGS
-Finger Print sensor NOT working
-Sim 2 Slot NOT working
-Notifications may be delayed
That's all i know, let me know if you find any more bugs.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What do you need to flash?
1. Must have an unlocked bootloader and have some custom romming knowledge.
2. Download the TWRP, VBMETA and boot.img, should be down in the thread.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How do I flash?
Put your phone in download mode and open odin, there you will click on AP and put your TWRP, after that put your VBMETA Disabler in the USERDATA slot.
After your done flashing the TWRP, shut off your device and hold POWER and VOLUME UP untill you boot into the TWRP.
Once you're in, go to wipe-format data-type yes.
Flash the boot.img ( IMPORTANT )
Flash the MultiDisabler
And now flash the GSI, I will be using the Pixel Experience 13.0 GSI https://github.com/ponces/treble_build_pe/releases ( BIG THANKS TO PONCES ON GITHUB FOR MAKING IT <3 )
After you're done flashing the GSI, reboot and you should be done.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CREDITS!
https://forum.xda-developers.com/t/...-android-12-gaming-rom.4515187/#post-87812539 ( from here i got the twrp, multidisabler and boot.img )
https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a71-snapdragon.4350893/ ( from here i got the VBMETA Disabler )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIRST TIME MAKING A POST! SO PLEASE TELL ME WHAT I CAN DO TO IMPROVE! <33
Click to expand...
Click to collapse
In all GSI if you go in phh treble setting - misc - under display fp color and select white the fingerprint work
Vastiano2 said:
In all GSI if you go in phh treble setting - misc - under display fp color and select white the fingerprint work
Click to expand...
Click to collapse
Thank you so much now it works, thanks for helping me but I got another question is how about Bluetooth?
Hello S8Hype! Well I Installed The Rom on my A71 but there are no display drivers (it always less bright on the screen) The AP On The Phone Is A715FXXU8DVK3. If There's A way to fix this reply!