Huawei 20 mate lite soft bricked - Huawei Mate 20 Lite Questions & Answers

Hi , soft bricked my Huawei Mate 20 lite. Model is SNE-LX1 HW/EU. Did a firmware upgrade to frp unlock Since then get black screen with yellow text saying a new OS has been installed and device reboots in recovery. Reinstalled already different firmware versions via sload SD card upgrade + use fastboot to unlock FRP code. Fastboot unlock command completes successfully and device does automatically a low level format to then come back to "different os installed message. Anyone advice ?

Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.

djlman said:
Hi phitilip, I can't help you on the bricked part (yet). I assume you tried to use Huawei Hisuite software to restore the original firmware so you could possible start over?
I recently got my Mate 20 Lite and haven't messed with it too much (yet!). I do have a question for you though. How did you get the bootloader unlocked? The only way I have found is to pay some random person/company for an unlock code. Trying to avoid that. By the way, I'm in the USA and also on SNE-LX1 with a 'global' designation.
Click to expand...
Click to collapse
Hi , the unlock code I purchased was for the FRP unlock because I was told would solve my problem and although the code is correct and allows to do a factory reset it will not solve the "you installed a new software ..." message. When looking online I found that I probably installed the wrong region code firmware but tried everything and cannot get the phone to boot normally. Any advise would be very appreciated.

Can you get to recovery or download?

I'm much more familiar with Samsung devices so my frame of reference is there. How did you flash the new rom? What tool? Where did you get the rom from?
Since you can reset to factory, but that still gives you the error, the only way I can think of so far, with the very little experience I have with Huawei devices, is to find two things if you can. First try to find a 3rd party recovery like TWRP or CWM or possibly use the tool you used to flash the ROM. Flash that if possible to the recovery partition. Then find the original factory firmware for your device and region, even if you have to go beck to Android 9. Then from recovery, or the tool you used to flash new rom, flash that. I'll do some research and see if I can find anything you haven't. From my limited searching for my own Mate 20 Lite, there doesn't seem to be much out there. What's your objective in all of this? Are you just looking to root? Did Hisuite play any role in this? The good news is I have the exact same device as you so I can try some things while it's not bricked

https://forum.xda-developers.com/t/...p30-pro-updated-on-03-12-2020.4032143/page-24 (this work is good.)

Related

Huawei Honor Note 8 root

I get asked a lot how I rooted my Huawei Honor Note 8 so I thought I'd do a basic how to from memory on how I did it. It's relatively easy to do.
You'll need your phone's bootloader unlocked.
The files from Huawei's forums http://club.huawei.com/thread-10828573-1-1.html or https://drive.google.com/file/d/0BwyaxIga7s0qc0ZKRGtsdndwV3M/view?usp=sharing
The app is in chinese but has some english on the buttons.
To unlock bootloader:
Got bootloader unlock code with the app on the playstore "DC Huawei Bootloader Codes" (took about 8 hours to get)
Enable USB debugging on the phone & connect it to the computer.
Unlock the bootloader with the program downloaded. Use the first button on the first tab labeled bootloader. Put in unlock code in the pop up box & click ok.
To root:
Enable USB debugging on the phone & connect it to the computer.
Flash the recovery_twrp.img file with the program downloaded. Use the 2nd button on the first tab labeled recovery.
To change twrp into english, click on the 3rd down 2nd row button & then click on the globe button. The globe is really hard to hit! Keep trying till you get it Then select English.
Install SuperSU with TWRP
Should now be rooted!
Question. Is there anything I should do like backup my bootloader or something before starting this process?
benmeroff said:
Unlocking your bootloader will wipe the device; factory reset for sure, and I believe it also erases your internal storage (don't quote me on that though, not sure for this phone), but your OS will remain whatever stock version you had installed until you flash something else.
Click to expand...
Click to collapse
I did not backup anything.
Ok thanks.. I appreciate it
I have a question, or making a root and unlock the bootloader is associated with a full reset your data and settings that can be done root without losing data?
Nope
Sent from my EDI-AL10 using Tapatalk
Hi guys
I unlocked my note 8 successfully . In startup screen show your devives is unlocked and can not be trusted every time i restar the phone is it normal?
Second thing i flashed twrp by clicking on recovery button then after restarted i clicked on 3rd button of second row to change to english but it didnt say click on english
How to enter twrp recovey i tried pressing power button and volume up nothing happened
Plz help
Yuppers.. not trusted cuz ya unlocked it.
Should be volume up & power. You can also do it with the app. The 2nd tab... recovery. Will boot it into recovery too.
You have to click the globe button on the far right to get to the language. It's a ***** to hit! BTW... TWRP has reverted back to chinese a few time now for some reason on mine. It's kind of annoying considering how hard it is to hit that one button.
Questions about the root process
1) why do you need the unlock code?
2) Where can I find SuperSU for honor note 8? Can someone please provide a link?
3) Has anyone succeeded rooting?
Thanks in advance for the answers.
Please Help!
Everything was find, I unlocked the bootloader, installed TWRP, when I flashed SuperSU it bootloops!
Can someone please help.....
I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk
problem solved
riffy504 said:
I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk
Click to expand...
Click to collapse
The problem solved. I downloaded the latest version of SuperSU (2.78) , flashed it again with TWRP and everything loaded find.
I have a rooted device too.
Thanks for your answers!:good::fingers-crossed:
Glad to hear it worked out!
i downloaded "DC Huawei Bootloader Codes" then i entered my Note 8 IMEI and waited for 8 hrs and got an email telling me it is failed and i tries the other IMEI "since it's dual sim card phone" but no luck, same message.
Please help
The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days. Huawei site error
DC Huawei Bootloader Codes not working
please help
Hi,
I read of the possibility of the root of honor note 8 through oneclickroot, kingroot, etc.
It must first be unlocked bootloader or the software will to unlock?
For unlocking the bootloader you must use to force pay program dc-unlocker?
Thank you
DC Huawei Bootloader Code get but not unlock
Bootloader unlock codes
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!
2Duky said:
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!
Click to expand...
Click to collapse
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.
arielisrl said:
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.
Click to expand...
Click to collapse
Great! Many thanks for your quick reply! I contacted dc-unlocker support and thats what they replied..
Hello, this codes is from factory DB. Sorry, but there not all phones present in this db.
This happens frequently if phone has MEID .
But you can read code by cable, we support almost all huawei.
If reading by cable not acceptable we can do refund.
Im waiting for their next answers at my qustions, what exactly have i do..
I have to download their soft probably and make everything there..
I had no time to check their forum yet, im sure there will be instructions..
EDIT:
Oki so i used DC-unlocker software, received these codes and unlocked Bootloader successfully!
I have rooted both phones already!
I had an issues with ADB drivers on Win10 and on Win7 as well, could not find my devices in devices manager but i have solved it!
TWRP 3.02 with preinstalled SuperSU works fine on B027.. In one of my phones i had B029 so i had to downgrade to B027..
On B029 doesnt work flash command in cmd.. Stuck on "waiting for device"..

I bricked my Huawei P10 Lite

Hey!
So I bricked my Huawei P10 Lite.
Modell number is WAS-LX1, the 3GB/32GB version
And it ran WAS-LX1C432B127
So I tried to flash the stock rom, but I couldn't find the exact same rom, only WAS-LX1AC432
I downloaded different versions from it from different sites, and flashed them with huawei multi tool, but none of them worked, I have no sound and NFC keeps turning on-and of.
I couldn't even find the same version with Firmware Finder.
Please help me guys I have read the whole internet
Hi buddy !
With some guys we have the same problem so join us, the name's topic is: Huawei P10 Lite Bricked?
I have already done some things so maybe it will help you too ! Sorry for my bad english i'm french ^^
Radnaksi98 said:
Hi buddy !
With some guys we have the same problem so join us, the name's topic is: Huawei P10 Lite Bricked?
I have already done some things so maybe it will help you too ! Sorry for my bad english i'm french ^^
Click to expand...
Click to collapse
Hey! Thanks for ur reply! Since that, while I was flashing different firmwares, somehow I relocked my bootloader, and ended up in eRecovery bootloop, and because my bootloader was locked, I couldn't flash firmwares anymore. But, to reunlock the bootloader, I needed the unlock code, which I lost, and to obtain a new one I eneded the product ID which is only accessible by the dialer. So, I decided to use funkyhuawei. As I Said, I had a WAS-LX1 with WAS-LX1C432B127. So, on funkyhuawei I chose WAS-LX1C432, but it couldn't find the update with eRecovery. I tried WAS-LX1AC432 too, but without success. So, I satrted to try all WAS-LX1 adn LX1A firmwares. I was able to install a WAS-LX1AC02 firmware. Now my phone think it's a LX1A and has no software upgrade option, but other than that it 100% works. As I see u are in serious trouble, I can feel ur pain. I have 3 credits left on my funkyhuawei account. It was pretty expensive, but I want to give u 1 free flash. I would give all of u in trouble, but maybe I will need it later So PM me if u want a flash and I can help u
Armin.K said:
Hey! Thanks for ur reply! Since that, while I was flashing different firmwares, somehow I relocked my bootloader, and ended up in eRecovery bootloop, and because my bootloader was locked, I couldn't flash firmwares anymore. But, to reunlock the bootloader, I needed the unlock code, which I lost, and to obtain a new one I eneded the product ID which is only accessible by the dialer. So, I decided to use funkyhuawei. As I Said, I had a WAS-LX1 with WAS-LX1C432B127. So, on funkyhuawei I chose WAS-LX1C432, but it couldn't find the update with eRecovery. I tried WAS-LX1AC432 too, but without success. So, I satrted to try all WAS-LX1 adn LX1A firmwares. I was able to install a WAS-LX1AC02 firmware. Now my phone think it's a LX1A and has no software upgrade option, but other than that it 100% works. As I see u are in serious trouble, I can feel ur pain. I have 3 credits left on my funkyhuawei account. It was pretty expensive, but I want to give u 1 free flash. I would give all of u in trouble, but maybe I will need it later So PM me if u want a flash and I can help u
Click to expand...
Click to collapse
I also bricked my p10 lite...
So if you're possible please give me a credit?
Sorry for my english.
Hi people, i bricked my huawei p10 lite was-lx2. Unlock and twrp. anyone have the firmware? I google it already but does not found any. WAS-LX2C636B130 dual-sim malaysia. Or if there is the way i can debrand it with "dual-sim and support my telco" firmware. tell me if its possible.
I have the same problem. After spending some time I found the problem.
For me it looks like one of the product or vendor partition is ****ed up, so it cant load the drivers from there. Since the files are OK it could be a signature problem. I started copying the smaller part ion in the bigger ones, because it fits in there... And the sound and bootlogo are working fine. BUT no camera. Later I saw some hard-coded paths so the problem was not really fix yet.
When you disable se-linux in the boot partition (Kerner parameter) all working fine. Bootlogo, sound, camera, nfc... I don't know why this happened. I used my own backup partition and the stock you can download.. Nothing works. If anyone has an idea how to get back to real stock that would be great because I want to have ota updates back working

Stuck on honor logo

Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
iantechie1979 said:
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
iantechie1979 said:
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Flash these files and it should, most probably, be fine.
use dload method as given here- https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
as there are many different opinions on this method of using only update.app file but thats not true and it should be all the files.
Main file - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...1812/f1/full/hw/eu/update_data_full_hw_eu.zip
Flash both the files in order. 1st file will restore your system but then you need to have 2nd file so that apps are installed and all working fine.
After 1st file, it may reboot on its own and stuck on honor logo, reboot to recovery and then do factory reset, it will be fine.
Then let it boot to set up. Dont set your phone. Shutdown and flash the 2nd file.
boot and set up.
Good luck. Please provide feedback once done. In case of further issue, let me know and will dig more into this.
Oh this is hard.
chrisleLP said:
Oh this is hard.
Click to expand...
Click to collapse
What is hard?
shashank1320 said:
What is hard?
Click to expand...
Click to collapse
This problem.
chrisleLP said:
This problem.
Click to expand...
Click to collapse
you cant follow simple instructions? you shouldnt be on this forum if youre not ready to lose data or brick your device.
Thanks for your input so far people. Much appreciated. @shashank1320 I am downloading the files you suggested and will flash them exactly according to your instructions. I will get back to you in a couple of days with the result. Fingers crossed.
gopinaidu77 said:
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
Click to expand...
Click to collapse
Unfortunately my warranty has expired. The annoying thing is that if i had sent my device off six months ago when this first happened it would still be under warranty but in the UK there is only 1 service center, yes 1, and its hundreds of miles away! So i figured i could solve it myself. You live and learn.
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
iantechie1979 said:
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
Click to expand...
Click to collapse
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
shashank1320 said:
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
Click to expand...
Click to collapse
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
iantechie1979 said:
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
Click to expand...
Click to collapse
Did you flash those files i given? If not can try. Else i will have to look for other alternative
yeah i downloaded those files you had mentioned in your post and followed the instructions to the letter.
I've got a suggestion if you have tried all these above.
Can you try the following on ADB and then try to unlock OEM again.
fastboot oem relock YourUnlockCode
I've done the same and it helped, even when bootloader displayed UNLOCKED. Please try it. :good::good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
NameNotFound74 said:
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
Click to expand...
Click to collapse
Try unlocking the bootloader again even if it is unlocked. It will factory reset the device and it should boot fine. Have stuck on this many a time and this was the method i followed.

Soft Bricked P9 L09 C150

UPDATE 2: Some things can not be fixed without proper tool. All i am left is to send it to service.
Which i did. Talked with a guy, explained and he told me he need to see it and test it with some tools. If can be fixed COOL if not i will sell it for parts and **** myself. Apperently some things need to be left to proffesionals.
PS. Will never get Huawei again
UPDATE: After trial and error i have TWRP instaled. Problem is i can't flash any rom because i got failed to mount /cust ,/vendor/ product (invalind argument) error. Also can't find stock flash rom for L09C150
Hello, i have problem with my phone, and this is 2nd night i spend working on it. Would appreciate any help!
Phone before trying to do anything: L09C150B367, Phone is from Hungary on Telekom (Pink T logo).
Tried to follow debranding guide (https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523) because i am sick of not having updated and unlocked global version. It's been long since i did anything with android and root so i tried and found guides on XDA.
Steps i did: found code for bootloaded, unlocked bootloader with SRK tool and instaled TWRP. Downloaded C432 and placed to SD. Trying to force update with Vol+,-, and power combo but update stop after 5% and say invalid software version. Somewhere i read that root is needed. Tried to root with SRK (Couple of times and different guides), not working for some reason. Phone is still unlocked with TWRP. Read somewhere (it was 3/4 am this night) that full wipe might solve it (note, i could boot into old OS). Did full wipe on TWRP and voila, not working. Can't even log on because no OS detected. Tried to find stock firmware to flash from SD card, no luck. All links i found either don't work or my recovery have ,,not correct version" error.
Now i have unlocked bootloader, custom TWRP recovery and no OS..essencially highteck-flashy brick.
What i want: Stock unbranded EU firmware.
Ps. Only phone, i refuse to burn 250e
If you are kind and free and KNOW how to do this, you can contact me via Discord and talk me trought this!
Cinnamon#9296

Question Need help Mi11 "your System has been Destroyed" Messeage

Hello everyone, im new to this Forum.
I need to ask if someone can help me. I remember using the cleaning Tool on my Mi11 on the Bus and seconds after closing the App the Phone suddenly Turned off & after Turning it back on it just displayed the Message
"your System has been destroyed" and constantly bootlooping.
Recovery Mode was not working, i can only get into fastboot Mode.
I tried flashing new Firmware with the tools provided by Xiaomi but they always tell me to unlock the bootloader wich i havent done and now i cant cause i cant get into the Phone.
I also tried unlocking the Bootloader with MiFlash Unlock but it tells me to add my account in the MIUI Developer Options..
I then contacted some Xiaomi unlocking Service and pay him 30€ to unlock my Phone in a teamviewer Session via AvatarAuthTool and some other stuff but even he was not able to do it.
I removed the backplate from the Phone and shortened the testpoint pins and he tried again with no luck..
i have no Idea how to get this Phone usable again and im desperatly looking for any help or advice bcuz im currently rocking my old Sony Erricson Walkman Phone..
thanks in advance for anyone who is taking the time to read all this and trying to help
You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?
Unknown.Guy said:
You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?
Click to expand...
Click to collapse
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.
Coolpenisbro said:
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.
Click to expand...
Click to collapse
No worries. You will have to try a couple of fastboot firmwares.
For each of them, you need to use the latest MiFlash Tool and make sure that CLEAN ALL only option is selected.
One thing to note here is that once you select the firmware folder in MiFlash, it automatically switches to Clean All and Lock
So you better make sure to look well and switch to CLEAN ALL only again before you hit the Flash button.
Latest Global:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Latest Global EEA:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Not so latest China Stable:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
I couldn't find the latest fastboot version for China. Make sure you download fastboot versions for all of these and try one by one. At least one of these have to work for your bootloader.
If these don't work then we could try Indonesia, Turkey, Taiwan and Russia firmwares. No way none of them works.
Edit: Idk how it selected Bold but nvm. Also, these steps will wipe all data on phone. Will be like a factory reset.
Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com
Unknown.Guy said:
Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com
Click to expand...
Click to collapse
Dude thanks for your efforts in trying to Help. In the end i refunded my Money wich i paid to the first unlocking guy and looked on Telegram, where i found a 100% legit dude. he flashed it on first try. also he was ok with an afterwards payment + he was only 25€. I can link his page if someone is interested.

Categories

Resources