Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
I had this same problem of giving an error in the installation of TWRP, in fact, before installing TWRP, you have to install vbmeta, it is what blocks the installation of TWRP, install it and then install TWRP that will work, download vbmeta disabled, install in AP, then install TWRP and be happy
Thank you man! Going to, one last question, is it going to be flash-able with ODIN or do i need to use another installation method?
Thanks again for your quick response!
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
alb.boy said:
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
Click to expand...
Click to collapse
Show log...
And you write your message not there, there is a separate topic for questions
use twrp 3.4
alb.boy said:
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
Click to expand...
Click to collapse
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
alb.boy said:
@Deivid Soltoski recebi a mesma mensagem de falha mesmo quando tentei fazer o flash do vbmeta desabilitado...acho que é outra maneira de instalar não através do ODIN...
Click to expand...
Click to collapse
Oh no, but if you're having more problems, try downgrading to Android 10, which has fewer problems
tutibreaker said:
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
Click to expand...
Click to collapse
I have done that through development mode. But still not working
alb.boy said:
I have done that through development mode. But still not working
Click to expand...
Click to collapse
No you dont, dude search for a guide here and read it
tutibreaker said:
No you dont, dude search for a guide here and read it
Click to expand...
Click to collapse
Will try, thanks though!
Related
Hello
J'ai donc installe une Rom sur mon Incredible S mais au moment de reboot il laisse la page Htc j'ai donc fait un backup, ca fait pareil, j'ai fait un restore, ca fait pareil
Je stress
Pourquoi ca fait ca ?
Thank you
est-que tu peux parler anglais s'il te plait? English website - pls speak the language
Sorry
Hello
So I installed a ROM on my Incredible S but when reboot it leaves Htc page so I made a backup, it's been like that, I did a restore, it makes such
I stress
Why is that do that?
Thank you
Are you using google translate?
that screws things up mate..
are you trying to say that you flashed a rom & its getting stuck on the htc boot animation page?
and what happens if u restore???
and not even sure if you'll understand what i've written!
WIILI120, since you responded in something similar to him may be u can help translate ?
world94 said:
Sorry
Hello
So I installed a ROM on my Incredible S but when reboot it leaves Htc page so I made a backup, it's been like that, I did a restore, it makes such
I stress
Why is that do that?
Thank you
Click to expand...
Click to collapse
Do you have an unlocked bootloader? If so, you need to extract the boot.img file from the ROM's zip file and flash it manually in FASTBOOT USB mode using the command:
fastboot flash boot [path to boot.img]
Yes do I use google translate
I flashed my ROM and I get stuck on the HTC page, if I did the same when i restore
:crying::crying::crying:
letmedanz said:
Are you using google translate?
that screws things up mate..
are you trying to say that you flashed a rom & its getting stuck on the htc boot animation page?
and what happens if u restore???
and not even sure if you'll understand what i've written!
WIILI120, since you responded in something similar to him may be u can help translate ?
Click to expand...
Click to collapse
Actually it's French but I really suck at it But if I'm getting it right, you quite understood his problem.
@world94: Dude we really need some more information on that Nous avons besoin plus d'information
What informations ?
tpbklake said:
Do you have an unlocked bootloader? If so, you need to extract the boot.img file from the ROM's zip file and flash it manually in FASTBOOT USB mode using the command:
fastboot flash boot [path to boot.img]
Click to expand...
Click to collapse
world94 said:
What informations ?
Click to expand...
Click to collapse
Tell us about your phone. How did you root? Which custom recovery are you using?
Also please read the above reply to your initial question!
I root from HtcDev and i install CWM
I test the fastboot tomorrow
Thank you
world94 said:
I root from HtcDev and i install CWM
I test the fastboot tomorrow
Thank you
Click to expand...
Click to collapse
OK then that is definitely your problem.
Flashing the boot.img file in FASTBOOT USB mode will fix you up.
You will also need to do this when you restore a backup in CWM. You will manually have to flash the boot.img in the backup directory on your SD card.
Now when I want to turn it on (normal or recovery) it will not turn on but when I want to charge the orange light flashes
Thank you
I don't understand what i have to do :crying:
world94 said:
Now when I want to turn it on (normal or recovery) it will not turn on but when I want to charge the orange light flashes
Thank you
Click to expand...
Click to collapse
world94 said:
I don't understand what i have to do :crying:
Click to expand...
Click to collapse
So did you pull the battery when you kept getting stuck on the HTC splash screen?
How many times did you try that and have to pull the battery?
Yes, yesterday ans today I had to remove a tens of times and tried to install the ROM about a stock tens of times as
world94 said:
Yes, yesterday ans today I had to remove a tens of times and tried to install the ROM about a stock tens of times as
Click to expand...
Click to collapse
So have you been able to try flashing the boot.img file in FASTBOOT USB mode yet? Or is that what you are trying to do now?
If you have indeed pulled the battery several times yesterday as you stated, then it could be possible that you now have a damaged emmc chip in the phone and that is why it will not boot.
I made the fastboot but he said he can not find the boot
And how can I do to boot it on something?
thank you
world94 said:
I made the fastboot but he said he can not find the boot
And how can I do to boot it on something?
thank you
Click to expand...
Click to collapse
You need to extract the boot.img from the ROM's zip file and then copy it to the same directory where you have installed the fastboot.exe
Instead of cwm is that?
world94 said:
Instead of cwm is that?
Click to expand...
Click to collapse
When you unlocked your IncS using the HTCDEV.com site, it had instructions on setting up the Android SDK tools adb.exe and fastboot.exe on your PC. That is the directory you should copy the boot.img file to.
Then you would use the same instructions to put the phone in FASTBOOT USB mode like you did when you generated the unlock token, but you would enter the command:
fastboot flash boot boot.img
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
There is a Mi5 flashing tool, but I've never used it.
sent from my Mi5
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
otonieru said:
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
Click to expand...
Click to collapse
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Citroon said:
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Click to expand...
Click to collapse
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
otonieru said:
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
Click to expand...
Click to collapse
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Citroon said:
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Click to expand...
Click to collapse
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
otonieru said:
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
Click to expand...
Click to collapse
my miflash wont detect my phone :/
Citroon said:
my miflash wont detect my phone :/
Click to expand...
Click to collapse
let me correct that, it wont detect the file
Citroon said:
let me correct that, it wont detect the file
Click to expand...
Click to collapse
What do you mean by that?
marcoly said:
What do you mean by that?
Click to expand...
Click to collapse
in the flash tool it simply says "error could not find the package"
Citroon said:
in the flash tool it simply says "error could not find the package"
Click to expand...
Click to collapse
Could you post screenshot of MiFlash showing path too?
marcoly said:
Could you post screenshot of MiFlash showing path too?
Click to expand...
Click to collapse
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Citroon said:
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Click to expand...
Click to collapse
this is another problem, when i want to flash TWRP it cant find my device
https://gyazo.com/9ef62b14719dcc9049b7103167921853
Your thread is getting slightly confusing so let's do it step by step.
Is your phone currently unlocked?
To check, put it into fastboot mode manually without adb:
Turn off your device. Then turn on your device again while holding volume down button.
Plug in your device. Use fastboot:
Code:
fastboot oem device-info
Post screenshots.
Reboot your phone. Post a screenshot of your "About phone" settings menu.
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
I also tried this way.But not miflash tool. I use twrp to flash global stable rom,boot up the rom and flash twrp through fastboot.And then you can flash your favourite rom.
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Svashtar said:
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Click to expand...
Click to collapse
I got mine sorted out, what you are missing is when you are done flashinh you have to type "Fastboot reboot" and then set TWRP to default recovery
hope that helps you out
Same problem for me, when i type "Fastboot reboot", my Mi5 reboot quickly and after when i go to recovery i see also Mi PC Suite....
Do you have a workaround ?
Second question, is it normal that time to send TWRP.img to phone in ADB is only 0,9s ?
http://forum.xda-developers.com/showthread.php?p=69249337
sent from my MI5
I Have a MI A2 and tried to make root to install the gcam, after that i tried to unroot my phone and re started to bootloop, i tried to fix it with mi flash but just show a devcfg error, after that i found a stock rom that can be installed with TWRP and worked, but now my phone doesn't update anymore, anyone knows what that can be????
Leodsantos said:
I Have a MI A2 and tried to make root to install the gcam, after that i tried to unroot my phone and re started to bootloop, i tried to fix it with mi flash but just show a devcfg error, after that i found a stock rom that can be installed with TWRP and worked, but now my phone doesn't update anymore, anyone knows what that can be????
Click to expand...
Click to collapse
with cmd flash stock boot img.
mariosenta said:
with cmd flash stock boot img.
Click to expand...
Click to collapse
its already flashed and today i have noticed that the model number of my phone its showing "Unknown"
Leodsantos said:
its already flashed and today i have noticed that the model number of my phone its showing "Unknown"
Click to expand...
Click to collapse
Unlocked bootloader? Well, you could try again to reflash whole system via miflash
Don't forget to enable oem unlock and debuging in developer options.
mariosenta said:
Unlocked bootloader? Well, you could try again to reflash whole system via miflash
Don't forget to enable oem unlock and debuging in developer options.
Click to expand...
Click to collapse
It's still giving a error, but thanks a lot
Leodsantos said:
It's still giving a error, but thanks a lot
Click to expand...
Click to collapse
Try to flash some custom rom, like pe or havoc, then try to reflash with mi tools
mariosenta said:
Try to flash some custom rom, like pe or havoc, then try to reflash with mi tools
Click to expand...
Click to collapse
I Have found this tutorial that install the room with ADB Fastboot and worked well the updates have worked well
link for the tutorial: https://www.techdroider.com/2018/08/install-official-firmware-mi-a2-fastboot.html
I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
zahidhasanzahid said:
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
thank you, you save my life!
miflash is suck, always failed to flash with it...
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
Thanks a lot for the clue. Never tried it before although saw it earlier.
It's really great tool. Much better than miFlash Tool and also the progress is visible in the log.
Cheers.
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
I didn't know that this tool used flash stock. I always use it for debloat.
Thanks for sharing.
zahidhasanzahid said:
I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Click to expand...
Click to collapse
Same thing is happening to me. I was trying to shift from Chinese ROM to Global in my Redmi Note AI. My phone turned on, already converted to Global, done Initial MIUI setup steps on the phone(selecting language, region, google account login...etc) but, in my PC MIFlashTool, it's still flashing, progress bar is green, no error is shown! should I unplug the USB and start using the phone as it is or re-flash using your Java tool?
why is my bootloader showing as locked even though i am on lineage. unable to use the jar for that reason.
alguém pode me ajudar? Eu coloquei meu celular pra instalar a rom, mas ele fica com o status em $pause. Gostaria de saber o que isso significa e se eu deveria esperar até algum resultado aparecer na tela.
Forum rules say posts must be in English.
This forum is for Mi 9T Pro / K20 Pro. Your screenshot shows you are flashing a Mi A3 ROM.
You are either posting in the wrong forum, or flashing the wrong ROM.
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
forget this..i've got ROOT check the other thread !
How do you fix it?
simika said:
forget this..i've got ROOT check the other thread !
Click to expand...
Click to collapse
How did you managed to fix this?
by reading lol.. check the other thread all written
For reference to whoever that are confused about where to look for the solution.
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
Download the vbmeta and flash it via fastboot to get rid of the dm-verify.
simika said:
by reading lol.. check the other thread all written
Click to expand...
Click to collapse
Could you reference a link or give me a little how to?
I tried a lot now:
- Installed a new Firmware trough Fastboot
- Using MsmDownload Tool
nothing helped so far.
So it would be great if you could assist in any way.
simika said:
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
Click to expand...
Click to collapse
I done everything but my phone doesn't unlock so now I have the dm-verity warning and I can't do a clean flash with Miflash. Also Miflash Unlock doesn't work. What I can do now?
if you can enter in fastboot mode, reflash stock boot and vbmeta
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
How can I do? Miflash says:
error:Writing 'crclist' FAILED (remote: 'not allowed in locked state')
bro you have relock bootloader, this is a fatal error. the only way is try to unlock with an mtk tool that do this via pc. you can find on internet. search unlock all mtk devices. i think there a link also on xda
Just realized that the M3 thread, my phone is a M4.
.
@simika how are you sending this question?
1. Hello friends, there are two ways to fix this problem, first you need Root, I read your Root tutorial, your tutorial is very good, and after using Root, you need to download any file manager, give Root Permissions, you need to backup your baseband, nvram nvdata nvcfg backup and save, you also need an MTK Bypass, you can search for MTK Auth Bypass Tool through Google, you also need to use SP Flash to flash the machine, you need to download the official firmware package, which can be downloaded from xiaomirom.com , download the corresponding version, use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, But you have backed up. Boot through fastboot to unlock the BL lock, perform fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. Congratulations The baseband is back, I'm a novice, my instructions are not comprehensive, such as where is the baseband location, but I have too many characters, I will list the baseband location. 2. Replace a new motherboard, all mobile phone problems are all solve.
Hope to help you.
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
Thanks. This worked on my Umidigi A11 phone.
xdadev_user11 said:
Thanks. This worked on my Umidigi A11 phone.
Click to expand...
Click to collapse
nice!
hello i got the same problem today, my phone is redmi9a can some help me regarding to this error ?
i had this problem even though i never unlocked my bootloader so i couldnt flash anything to fix it. but when i got the miui 13 update it fixed it for me
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
What if you cant enter fastboot?