I was researching a bit on the internet since I was bored and I had installed android 12 on my FIG-LX3 the problem is that my storage did not work with the recovery of havy 86 I was researching a lot and trying a lot and I asked myself if the ( P20 lite ), it is the counterpart of the P smart 2018 because I did not test the TWRP of said cell phone I did not think it would work for me since they were 2 different models but take into account that they are the same cell phone only different, until fastboot gave me positive and I I passed the test in TWRP
I do not own this custom recovery, I am simply sharing my information so as not to let this cell phone die, since I have been with it for a long time and I see a lot of potential in it, I even ran android 12 LOS.
Download twrp-3.6.2_9-0-anne.img
Download page for twrp-3.6.2_9-0-anne.img
dl.twrp.me
Download twrp-3.6.2_9-0-anne.img
Download page for twrp-3.6.2_9-0-anne.img
dl.twrp.me
Download twrp-3.6.2_9-0-anne.img
Download page for twrp-3.6.2_9-0-anne.img
dl.twrp.me
Keep in mind that you must have knowledge of flashing, to have a correct installation remember to install your respective ADB and your respective Driver.
Related
I've used the region code I've installed 3 days ago and I've used the device 1 day. Then I get my idiot head c185 device I said I am installing C432 Emui 9 u and there the device could not install the software with Hwota anymore. Continuous E enters Recovery Mode. I am trying to do the installation with FAstboot on the computer.
yunusdemir said:
I've used the region code I've installed 3 days ago and I've used the device 1 day. Then I get my idiot head c185 device I said I am installing C432 Emui 9 u and there the device could not install the software with Hwota anymore. Continuous E enters Recovery Mode. I am trying to do the installation with FAstboot on the computer.
Click to expand...
Click to collapse
Try to avoid cross posting issues, it makes it confusing for people trying to answer you and I'd imagine for you to follow potential solutions.
Hi every one. I can't find solution to my problem so I decided to ask your help.
Few days ago I read that I can update my Huawei p10 to android pie officialy through Hisuite. Scanned for update and it said that I'm on the latest android which was emiui 5.1 so I started to look for a way to force it and found solution (will be posted bellow).
After it Hisuite found pie 9.0.1 update and after downloading the files it started installing it. After that it loaded 100% and rebooted, then rebooted again and again and again... shortly realised that it's bootlooping. Tried to turn it off and yet it kept bootlooping, took it apart disconected battery and hopped to enter recovery mode or fastboot, boot as soon as i plug the battery in and put usb or power on button same thing continued and i can't enter those modes whatever i do. Can anyone help me with this?
Oh yeah, I've tryied this methode on mate 9 pro from 5.1 to 9.1 and it worked flawlessly, then right next after that I attempted p10. Also i think i didn't do anything with firmware finder couse i saw update anyway.
Also on backup photo Details it shows build VTR-L09C432B171 ithat was before me trying to update it
Update methode
"Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy."
IIm still lost. Is there anything i can do?
Hello, I'm new to "MI" or "MIUI" world in general.
Ok, I'm an advanced user, but not a dev. And I bought this phone for my Sister (61 year old).
I don't want to unlock it and oblige her to make manual updates just for the sake of TWRP full back-ups.
I just wish to provide my sister a hassle free smartphone and provide her some help.
And the first is getting original USB and adb drivers for use on her PC.
Unfortunately, I cannot find any "official" redmi or xiaomi site where to download these !
In a frenzy I don't get, there seems to be a lot of sites and pages where one can download "so-called official things" ...
Please help me enter this Chinese World of thinking AND find a trustable site for downloading trustable drivers, stock apps, such as MiFlash, etc. !
;-)
For drivers I personally would recommend this post.Post by fawazahmed0
Driver
The miui software isn't very difficult to understand.
Mi by itself doesn't provide loots off software basically the community provides since the start of xiaomi the goodies.The rest it's android 10
The red mi isn't the big flagship of xiaomi/red mi.So updates and roll out of android 11 will take time.
Mi pcsuite you can try it but most have connection problems.
Mi flash is a stable and nice software especially when things go wrong.make sure windows recognise your phone in fastboot mode.
There are plenty off software back up around on the web.
Roms you can find on mi.com
Something to look in to search for how to remove bloatware on xiaomi phones.
Bloatware removal tool.
Forums: this one offcourse
Mi community xiaomi forum(APK also available)
xiaomi.eu/communityy.
I been a mi fan from the start .The last year's what is holding me back is the miui software with bloatware ware .So yes I run on root and removed a lot off apps.but that's just my thoughts.
My thoughts read post off driver install with working flashboot to.
Download recovery rom and miflash.
Back up with a Google account.
And remove ads
Try this:
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
Mi Flash Pro
Mi Flash Pro helps you to Manage your Xiaomi Smartphone. It helps you to Download Firmware, Flash Firmware, Flash Recovery.
miflashpro.com
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Hi all , i made mistake when i wanted to downgrade my P40 pro , in installed ANA version of software instead of ELS, don't know how that install even managed to go thorough ,
Now when i try to install ELS version no mater how i try, i cant i tried DLOAD from OTG/CARD ( get wrong version of software error) and fast boot via hisuite prxoy and HiSuite i get error on verify part.
Anyone have some advice that does not include me going to Huawei since that would cost me here same as new phone.
PS any ANA version install manages to finish, but i have problem with not having imei, keyboard, cant use SIM card and it keeps restarting every couple mins.
Post screenshots of:
Firmware details in ProjectMenu: dial *#*#2846579#*#* \2.Veneer Information\1. Version Info
badmania98 said:
Post screenshots of:
Firmware details in ProjectMenu: dial *#*#2846579#*#* \2.Veneer Information\1. Version Info
Click to expand...
Click to collapse
that is the problem i cant, since i dont have keyboard i cant go past welcome screen , apparently emui 12 wants you to log in to huawei first
i do remeber that it was c432 r4 - that stayed in my head.
now i am trying difrent versions on recovery via hisuite proxy
So far only ANA versions wants to go through.....
and i am sure it was ELS even google has it remembered in firm finder v2 , not sure how did i end up on ANA
i could try to downgrade to ANA emui 11 to still have USB options but i think i could pass welcome screen and hope that phone does not restart until i take picture of project menu.
Do you have a NM card?
yeap i tried with DLOAD method that i got from couple of posts ( some of them yours ) , difrent versions of system ( almost got my SSD full....) always get error that it is wrong version when i try to do update via SD/OTA from recovery. So far ANA is first one that actually completed....
i even tried to change names of files to match ANA but nothing ( that was long shot to be fair )
i tried to mix files to, but update_sd_base must be from ANA version anything else fails right away.
Seems now problem is downgrading ANA EMUI 12 to 11 - no mater what system i try it wont whether is ANA or ELS - Any ideas?
Okay no mater what i try to install i get software install failed wrong version.... Same with Hisuite proxy and dload method. Anyone have any ideas?
I sent it to phone service center please close this thread.
I already sent a private message to a Recognized Contributor on XDA.I think that If post here I could help also other members.
I have problem with my new huawei p30 pro.It was stuck on android 9 and emui 9 ,I tried every official modes to force the update.But I couldn't achieve that.
So I tried with hisuite proxy .I finded my Device model(VOG-L29) region: C431-HW-EEA , then clicked on add rom on firm Finder v2 .The version was the lastest 102.0.0.134
The procedure was smooth and I choosed the right ROM (100% sure!I already have that webpage open)Once finished the smartphone installed the EMUI 12 but once restarted the massage: Your device has loaded a different operating system! scared me .
Do I broke the phone? Is there a way to fix it without changing the motherboard?
Thanks a lot every help will be appreciated so much
Little Update.
I tried several methods trying solving this big issue.
1.Update from Erecovery trying to download and recover the package via WIFI
RESULT:the phone updated from 12.0.0.134 to 12.0.0.149 but once rebooted the
same result with black screen and the massage: Your device has loaded a different operating system
2.I done the same procedure of this guy
I also saved the log file of hisuite and here are the version before I made that mess:
* FirmWare_Base:VOG-LGRP2-OVS 9.1.0.240
* FirmWare_Cust:VOG-L29-CUST 9.1.0.4(C431)
* FirmWare_Preload:VOG-L29-PRELOAD 9.1.0.2(C431R2)
So The ROM I selected on huawei firm finder v2 was good(VOG-l29 102.0.0.134)
I succeeded to Recover and install the previous ROM,the 9.1.240,with hisuite and hisuite proxy
but once finished an error on the p30pro appear: Software install failed.
tried also the 10.0.0.195
I'm thinking about dload with otg or nm card but I don't know the procedure.
Could you guys help me?
Thanks
As the title changed I solved the problem of soft brick.
I write here the tutorial to help those who might have the same problem.
Requirement :OTG cable ,exFat formatted pen drive and the right Firmware to flash.
Create a dload called folder inside the pen drive and put in it the 3 Firmware's .zip file(base,cust and preload)
I specify that my p30 was bricked on version 12, so my first attempt was to load the version
VOG-L29 hw eea VOGUE-L29C 9.1.0.115(C431E4R2P2).
To flash the firmaware from usb pen take the phone off and hold the volume up button for several seconds while we connect to charge the phone .Connect the usb pen and from erecovery choose OTG update mode.
The result was an unbricked p30 pro but no fast charge and usb data tranfer and I can't get any type of update from OTA.
So I downloaded this version:
https://huaweidownload.com/download/p30-pro/vog-l29-2/10-1-0-123/
I flashed my P30 Pro once again, and of course no USB connection and fast charging. But system afetr few minutes started finding upgrades via OTA. Passed from 10.1.0.179 to 10.1.0.201. Of course I let it upgrade.
It was 11.0.0.138 first, then 11.0.0.174(last EMUI version before version 12 ) came and USB connection was restored.
you can also find other firmware here:
https://androidhost.ru/search.html
https://www.hardreset.info/it/devices/huawei/huawei-p30-pro/faq/firmware/huawei-firmware/
Even if I am a programmer I am new in the world of android bricks and I spent 2 afternoons and many attempts to solve the problem.
The last problem concerns the creation of a backup point. I have tried different version of HiSuite and both windows 10 and 8.1.But I couldn't get data from phone
The solution is to install the Androis ADB inteface Drivers while the phone is connected to the PC. I believe that this way data information is injected to the phone as well as installed on the PC.
take the drivers from here: https://oemdrivers.com/usb-adb-interface
or here: https://www.drivermarket.net/adb-fastboot-drivers-v1-4-3-download-for-windows-latest/
once you carry out this procedure you fixed everything