Database Develop

bootloop or idk

So I was trying some things and i flashed a boot.img that wasn't on my phone, it was on PC.Is it possible to have caused this problem to my phone?
My problem is that I open and just a black screen appears.. not even sony logos.I can only enter recovery mode and i cant use SUS because it says there are edited softwares on my phone.. What to do?
P.S: I can only reboot with off buton.. power button does nothing.
P.S2: I dont care if i lose all my data.. i just want it to be fixed..

billaras481 said:
So I was trying some things and i flashed a boot.img that wasn't on my phone, it was on PC.Is it possible to have caused this problem to my phone?
My problem is that I open and just a black screen appears.. not even sony logos.I can only enter recovery mode and i cant use SUS because it says there are edited softwares on my phone.. What to do?
P.S: I can only reboot with off buton.. power button does nothing.
P.S2: I dont care if i lose all my data.. i just want it to be fixed..
Click to expand...
Click to collapse
when u start hold volume - and +
try to get in recovery if not work is because u flashed a boot.img corromped
.. try to install nayak kernel

samuk190 said:
when u start hold volume - and +
try to get in recovery if not work is because u flashed a boot.img corromped
.. try to install nayak kernel
Click to expand...
Click to collapse
I can get in recovery mode as I said above.
How can i install nayak kernel or any kernel from recovery mode? Is there any guide?

Hard brick z3 compact - flashtool does not work

hello all friends.
I have a hard brick in my Z3c ... rather than install a full rom, I installed an update to 135 MB, and had given full wipe the system the device simply does not care anymore.
FlashTool does not work, already tried everything and it will not.
Error of drivers but they are installed all the drivers ... ok.
I TWRP on the device but can not access it for flashing back up what I had done.
Simply do not have access into the Z3c ...
Some logical solution to this problem ??
Grateful to all the friends who can help.

Can u open recovery mode?

Majin Aiman said:
Can u open recovery mode?
Click to expand...
Click to collapse
Not possible enter in recovery... TWRP instaled e backup , im not access into Z3C.

Are u tried recharging?

Unlocked bootloader?
Is the front panel led still working?
Can't you see the Sony logo?
If you press power + volume. up for some seconds, does the phone vibrate?

Fastboot mode?

istux said:
Unlocked bootloader?
Is the front panel led still working?
Can't you see the Sony logo?
If you press power + volume. up for some seconds, does the phone vibrate?
Click to expand...
Click to collapse
hi i have the exact same problem. tried flashing a rom and reboot system. but the phone wont turn on. red led flashes when connected to usb. phone vibrates once when press power, vibrates 3 times when i press power + up vol rocker. but nothing on screen for both instances. is it a hard brick? cant access recovery

kingsfall1233 said:
hi i have the exact same problem. tried flashing a rom and reboot system. but the phone wont turn on. red led flashes when connected to usb. phone vibrates once when press power, vibrates 3 times when i press power + up vol rocker. but nothing on screen for both instances. is it a hard brick? cant access recovery
Click to expand...
Click to collapse
Nope, it's just a soft-brick
Press power + vol.up until it vibrates 3 times.
Then flash a stock firmware with Flashtool. Look here: http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706

istux said:
Nope, it's just a soft-brick
Press power + vol.up until it vibrates 3 times.
Then flash a stock firmware with Flashtool. Look here: http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
Click to expand...
Click to collapse
wow it really works. thank you so much! by the way do u happen to know why there is an error of "E:error executing updater binary in zip" on TWRP when i try to flash a rom

kingsfall1233 said:
wow it really works. thank you so much! by the way do u happen to know why there is an error of "E:error executing updater binary in zip" on TWRP when i try to flash a rom
Click to expand...
Click to collapse
I had that exact problem when installing Cyanogenmod a couple of days ago, realized there was no internal storage anymore so i flashed a pre root zip and got my files back.
I was using XZDR, I think it is just a problem with the latest twrp...

stuck on 'encryption unsuccessful' screen

hi. zuk z2 pro
stuck on encryption unsuccessful screen. only reset or reboot available.
when trieng to enter recovery (vol up+down+power) i get only reboot power off and update options.
can't enter fastboot (vol down + power) its keep rebooting me.
what can i do to save my device ?
thanks

havlaz said:
hi. zuk z2 pro
stuck on encryption unsuccessful screen. only reset or reboot available.
when trieng to enter recovery (vol up+down+power) i get only reboot power off and update options.
can't enter fastboot (vol down + power) its keep rebooting me.
what can i do to save my device ?
thanks
Click to expand...
Click to collapse
Reflash stock rom via qfil, u can search it on zukfans.eu

Starchm said:
Reflash stock rom via qfil, u can search it on zukfans.eu
Click to expand...
Click to collapse
i cant seems to to enter the right mode.
becouse i succesed to enter fastboot, so i opened the bootloader, and flashed twrp, but every rom i flash.. i stuck on bootloop.
so i tried what you told me, and it keep poping the unlock menu. do i need to relock bootloader ?

havlaz said:
i cant seems to to enter the right mode.
becouse i succesed to enter fastboot, so i opened the bootloader, and flashed twrp, but every rom i flash.. i stuck on bootloop.
so i tried what you told me, and it keep poping the unlock menu. do i need to relock bootloader ?
Click to expand...
Click to collapse
If u reflash stock 1.9 rom then it will automaticly lockdown

Starchm said:
If u reflash stock 1.9 rom then it will automaticly lockdown
Click to expand...
Click to collapse
yes i know, but i cant get to a point that i can flash...

Any progress on this one ? I have the exact same problem.

Le2 x520 no screen after unbrick

Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.

hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]

I've also same issue, please tell me if you get rid of this.

Volvo_be said:
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
Click to expand...
Click to collapse
PandaDex48 said:
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
Click to expand...
Click to collapse
Masood_alam said:
I've also same issue, please tell me if you get rid of this.
Click to expand...
Click to collapse
10. Once completed, disconnect the phone and power it up by long pressing power button.
Click to expand...
Click to collapse
I can't see/read, one of you did a long Power-Button pressing???

JamBax said:
I can't see/read, one of you did a long Power-Button pressing???
Click to expand...
Click to collapse
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?

sree94 said:
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
Click to expand...
Click to collapse
Down load this older version of twrp-3.0.2-0-s2.img from https://dl.twrp.me/s2/
do a wipe->data format-> yes
then reboot.

Hi
I have same issue. Its looks like phone is turned on but my screen is black. I cant connect with adb cos i flashed fresh stock rom and with black screen i cant turn on debuging usb or unlock.(i can\t flash twrp so i cant flash new custom rom) Is there a way to flash custom rom with stock flasing tools like flashone or qfil, or is there a way to control my phone from computer without needing android screen(i can\t give any permission to new apps cos it new stock rom and my screen is black )

Solved - No Display after Flash
I know this is a old thread, but still i am posting this because u never know who might need it...
Guys i was having similar issue. After flashing Le2 with QFIL, I was getting no display. However my phone was somewhat on and making bleep sound when power key was pressed. Do this if you have similar problem:
1. Download this firmware:
https://drive.google.com/file/d/136X8jKA5eJRkyQ3Fi2f1r6qNkLXAG8io/view?usp=sharing
2. Flash it with QFIL/Miracle box/UMT whatever u feel like.
3. Hold Vol+ and Power button and goto Recovery. TWRP recovery will boot.
4. Now put any rom (i used latest LOS nightly) in it by using MTP from PC and flash it.
(Optional step: if u want to use official firmware It may happen that u get stuck at LeEco boot screen, only if u get stuck, then flash the kernel inside the zip and it will boot normally.)
5. ENJOY ^_^
If this helped, you know what u have to do :angel:

MESSED UP!!!!! TWRP FLASH FAILED, STUCK AT AWB FAIL

Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?

code_blanc said:
Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?
Click to expand...
Click to collapse
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom

Thank you for the reply. I figured it out shortly after posting this question. Thanks for your help..

can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.

i tried this one but it didnt work
LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse

lawrenzdr said:
i tried this one but it didnt work
Click to expand...
Click to collapse
If this method didn't work, maybe it has a hardware issue so check ur phone in any repair shop

lawrenzdr said:
can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.
Click to expand...
Click to collapse
There must have been written something like "you are not using official software press the power key to continue".
So, Just press the power key.

LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse
mine also same problem done above thing did'nt work, could u help my problem
Error verifying vbmeta image: invalid vbmeta header (6) VBMETA M315FXXU3CVH1, 54678140R
Trying to root my galaxy M31 by flashing a TWRP recovery file but I got this above error!... Finally end up with... Neither I can restart phone (volume down + power) coming to same screen nor enter to TWRP recovery mode (volume up + power) also...
forum.xda-developers.com

Root sonrası parmakızı çalışmıyor, bu sorun nasıl çozebilirim
Fingerprint does not work after root, how can I solve this problem?

Roottan sonra parmak izi çalışmıyor, bu sorunu nasıl çözebilirim?Fingerprint does not work after root, how can I solve this problem?