[GT-P3113] P3113XARCLI/P3113XARCLI4 [OTA] Jelly Bean v4.1 *TEST FIRMWARE* - Galaxy Tab 2 7" Android Development

*Note* You MUST been on firmware version P3113UEBLH2 prior to flashing!
If you need that firmware or any other one, Download it here! ► [GT-P3113] Galaxy 2 7.0" Tab *OFFICIAL FIRMWARES!* ◄
► Instructions:◄
• Make sure your tab is charged up to at least 50-75%
• Download P3113XARCLI Firmware (Links below!)
• Extract .RAR archives
• Copy .ZIP file (GT-P3113_P3113XARCLI-OTA-P3113UEBLH2_XAR_343830130.zip) To SD Card
• Turn OFF tab!
• Enter Recovery Mode!
• Boot your tab in recovery mode, Press & Hold Volume Up + Power Key simultaneously until recovery mode opens
• Select "Apply update from external storage" And then navigate to P3113XARCLI OTA update!
• WAIT for it to update!....
• Jelly Bean will get installed and system will reboot automatically!
• If it doesn’t, Go back to the main Recovery Menu and select "Reboot system now"
Firmware Version: P3113XARCLI [OTA] *TEST FIRMWARE*
OS: Jelly Bean *TEST FIRMWARE*
OS Version: v4.1
Firmware:
http://www.mediafire.com/download.php?d0l32lbpbdnd344
http://www.mediafire.com/download.php?fwr7pdlxii9iajz

....Will be posting/uploading the P3113UECLI4 OTA Firmware soon!

Gizmo said:
....Will be posting/uploading the P3113UECLI4 OTA Firmware soon!
Click to expand...
Click to collapse
Hell yeah Gizmo
sent from my galaxy tab 2 using Tapatalk

Here you go guys! ....Instructions are the same as above!
Firmware Version: P3113XARCLI4 [OTA] *TEST FIRMWARE*
OS: Jelly Bean *TEST FIRMWARE*
OS Version: v4.1
Firmware:
http://www.mediafire.com/download.php?kd6dua4e2a57k29
http://www.mediafire.com/download.php?4x4l90y5kzdjc2s

Thank you. Is a wipe required?
Sent from my GT-P3113 using xda premium

jdog_12345 said:
Thank you. Is a wipe required?
Sent from my GT-P3113 using xda premium
Click to expand...
Click to collapse
....Wipe NOT required!

These firmware files have been out for a while
Sent from my SGH-T989 using xda app-developers app

Update did not work for me ?
Update starts without issue, but the last step appears to be updating remaining files...or something of that nature
At that point - the recovery details appear above the script, and just sits there. When I reboot system I get the Galaxy tab screen - then a blank screen, and nothing else
I was able to get back into download mode - successfully returned to stock rom(as indicated in your instructions).
I've done this three times - no luck
Regards,
sent from my GT-P3113 using Tapatalk HD

bill_in_mtl said:
Update did not work for me ?
Update starts without issue, but the last step appears to be updating remaining files...or something of that nature
At that point - the recovery details appear above the script, and just sits there. When I reboot system I get the Galaxy tab screen - then a blank screen, and nothing else
I was able to get back into download mode - successfully returned to stock rom(as indicated in your instructions).
I've done this three times - no luck
Regards,
sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Could this be due to the file being broken into two zip files? There's a part 1 and part 2, and the op doesn't address how to flash like that. Do we flash both files or do we need to unzip each file, combine, and repackage for flashing?

intelligencexan said:
These firmware files have been out for a while
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Where because I cant find them.
Also the download is dead. Mediafire doesn't like multi part files. Why don't you put the file back together into one so it can be flashed. If you need some where to dump a single file I will let you use a spot on my dropbox.

Aren't these the same OTA files for the p3113 that have been available since September on SamFirmware.com?

rsage said:
Aren't these the same OTA files for the p3113 that have been available since September on SamFirmware.com?
Click to expand...
Click to collapse
It does look like it to me. There are even flashable ROMs of the latest 4.1.1 (P3113UECLI4)... like this [ROM][9/18][GT-P31XX][JB][4.1.1]Stock_Rooted_Deodex_Zipalign.

Isn't the version that Romswell is built from come from the U.K. version or something like that?
Could this be a U.S version? What else could change that would make this different?

stupid question?
Since tis is a stock rom do I need to root my tablet prior to flash it?

chiquito3 said:
Since tis is a stock rom do I need to root my tablet prior to flash it?
Click to expand...
Click to collapse
From what I read from instructions on first post, NO! Link is broke anyway!

intelligencexan said:
These firmware files have been out for a while
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Who said they weren't?....Just mirroring files and having them in one easy to access spot! If you don't have something of VALUE to add to a post....DON'T POST!

Quantumrabbit said:
It does look like it to me. There are even flashable ROMs of the latest 4.1.1 (P3113UECLI4)... like this [ROM][9/18][GT-P31XX][JB][4.1.1]Stock_Rooted_Deodex_Zipalign.
Click to expand...
Click to collapse
Links are currently down....ALL files ARE flashable! BEFORE that, All you had to is extract the RAR archive to get the FULLY intact flashable ZIP!

Gee ,not only is this broken its old. Be clear about what you are posting.please otherwise you are wasting everyone's time
Get the latest , full zip here, from SamMobile.
http://www.hotfile.com/dl/172673176...UECLI4-OTA-P3113UEBLH2_XAR_374372839.zip.html

Sargeue said:
From what I read from instructions on first post, NO! Link is broke anyway!
Click to expand...
Click to collapse
Yes, Links are currently down! Will fix it when i get time....In the mean time, GOOGLE it!

MSHancock said:
Isn't the version that Romswell is built from come from the U.K. version or something like that?
Could this be a U.S version? What else could change that would make this different?
Click to expand...
Click to collapse
U.S Version!...."Search" is your friend!

Related

[ROM][GT-P7100] Unofficial Android 4.04 CM9 (ICS Preview) (02/05/2012)

I am please to announce an unofficial build of Android 4.04 (CM9), Ice Cream Sandwich (ICS) for the Galaxy Tablet 10.1v (the forgotten one), GT-P7100.
PLEASE READ ALL THE INSTRUCTIONS​
You do this at you own risk. I cannot be held responsible if you brake something.
This is an alpha build, what does that mean?
It is not feature complete.
It will contain bugs.
It will not have everything working 100%, do not complain about something is not working.
What is not working:
Camera
Tether
Battery usage data
When trying to unlock tablet the touch screen sometimes does not respond. When you press lock (power) it just dims screen. Let the tab go to sleep itself and try it again. Keep doing until it works, it does sometimes take a while to get back, or force hard reboot.
Screens flashes to black when you login to tab
If you have flashed a 7500 modem to your TAB the signal strength will not work correctly. (working on a fix, I hope)
What is working:
3g
Wifi
HQ Youtube video’s
Android
Install instructions:
You need root
Backup your current tablet via CWM/Recovery
Copy files onto your tab.
You need to install a new recovery.img via fastboot , you should know how to get into bootloader to do fastboot by now, if not see instructions above for root: fastboot flash recovery /path/to/recovery.img
Reboot into recovery,
Wipe/Data reset (very important)
Wipe Cache
Flash ROM,
Flash GAPPS.
Reboot
Enjoy!
Thanks to the flowing people:
Pershoot - Kernel work, Device tree, All around guru, etc. He assisted me a lot.
The CyanogenMod team for the wonderful cm9 experience.
Makbil - Assisting with testing.
Codeworx for pointing me in the right direction to get 3g working.
Seo, He assisted me a lot.
If I missed someone let me know.
The Wife and kids, putting up with me with all my late nights.
changelog: 02/05/2012
Latest CM9 upstream changes
Latest kernel fixes from pershoot, including SoD.
changelog: 02/04/2012
CM9 Android 4.04 update
Latest kernel fixes from pershoot
changelog: 30/03/2012
core: remove extraneous wifi fw - pershoot
overlay: fix tether when using NL80211/HOSTAPD - pershoot
core: remove extraneous libnv/axf files - pershoot
Kernel Changes: - pershoot
[**]defconfig: ics: enable remaining PPP options and L2TP
[**]net: backport/sync l2tp with moto's 2.6.39
[**]net: backport/sync *ppp* with moto's 2.6.39
[**]sdio: optimized SDIO IRQ handling for single irq
[**]defconfig: ics: set TUN to be in-built and BROADCOM_WIFI_RESERVED_MEM
[**]wireless: bcmdhd: use wlan_mem_prealloc for CUSTOMER_HW_SAMSUNG
[**]video: tegra-ics: sync with ASUS's TF101 ICS kernel source
[**]cfg80211: fix a crash in nl80211_send_station
[**]nl80211/cfg80211: Make addition of new sinfo fields safer
[**]cfg80211/nl80211: Send AssocReq IEs to user space in AP mode
[**]cfg80211: Add nl80211 event for deletion of a station entry
[**]wireless: bcmdhd: import bcmdhd from I-9100 (GSII) Update
[**]wireless: bcmdhd: import wlan_gpio from bcm4330, remove OOB_INTR_ONLY and RDWR_MACADDR (to BCM4330)
[**]Bluetooth: bnep: Fix bad ether addresses
[**]media: video: avp-ics: backport/sync with nvidia's 3.1
[**]media: fix corner case in tegra_mediaserver
[**]arm: tegra (partial): fix numerous warnings
[**]defconfig: ics: enable CFG80211
Latest upstream cm9 Changes as of 28 March 2012
changelog: 20/03/2012
pershoot - kernel fixes(wifi)
changelog: 18/03/2012
kernel fixes/enhancements
core: switch to ASUS's TF101, 9.2.1.11 ICS libs/fw
core: remove extraneous wifi fw
network: change to in-build broadcom bundled FW for STA/P2P
bootanim: set BOARD_CACHE_BOOTANIM
network: wifi: switch to in-build broadcom bundled FW for AP
core: remove extraneous wifi fw
Latest CM9 upstream fixes/enhancements
For Updates:
YOU NEED TO REFLASH GAPPS.
YOU DO NOT NEED TO WIPE AGAIN!
The download link Note: I will keep the same link I will just update it.
Test ROM's available from here: http://droidbasement.com/galaxy/roms/cm9/p3/. Pershoot is providing them. They will disappear from time to time, meaning he is building new test versions. Deal with it.
reserved for future release.
Wow. Great . And how it looks with auto rotation?
Sent from my Galaxy Nexus using XDA App
thanks again for the ICS exp.
Hi isi,
First of all thank you for bringing ICS to the 10.1V.
Before i flash it (wich i surely will) ive got a question....
IF for any reason i wanted to go back to a 3.2 ROM, do i get any problems
with (just a guess) for example bootloaders or something like that.
or is it as simple as flashing stock rom (chainfire's).
thanks again......its gonna be late tonight
edit: what do you mean by ïnstall NEW recovery"...im running latest cwm from pershoot's blog.
is that ok or do i have to flas another?
richard2311 said:
Hi isi,
First of all thank you for bringing ICS to the 10.1V.
Before i flash it (wich i surely will) ive got a question....
IF for any reason i wanted to go back to a 3.2 ROM, do i get any problems
with (just a guess) for example bootloaders or something like that.
or is it as simple as flashing stock rom (chainfire's).
thanks again......its gonna be late tonight
edit: what do you mean by ïnstall NEW recovery"...im running latest cwm from pershoot's blog.
is that ok or do i have to flas another?
Click to expand...
Click to collapse
Yes you can go back.
Ok is it neccasery to flash recovery.img first.?
I have latest recovery from pershoot installed.
Sent from my GT-P7500 using XDA App
Flash recovery from my download.
Sent from my GT-I9100 using Tapatalk
I get an error in cwm-recovery if I try to flash ROM.
It says I have the wrong device.
I think I have to flash Stock ROM 3.0.1 and than 4.0.3!
Other ideas?
Is that the wrong or right way?
Thankyou Isi
This is brilliant. I will definitely be trying this over the weekend.
Sent from my GT-I9100 using XDA App
Hi Isi,
Just some quick questions.
What to do to return to 3.2 ? - Just flash 3.2 rom ? With Rom Manager ClockworkMod Recovery ?
Aplications from samsung like Email etc what happens to them ?
Can one install them ( samsung Email etc ) from titanium backup or they dont work in ICS?
Isi can i link new files as an alternative download place ?
Thanks
I have thw Problem. After installing in Start Wizard it shows that app is/will be closed. Any idea?
Sent from my Galaxy Nexus using XDA App
danikristijan said:
I have thw Problem. After installing in Start Wizard it shows that app is/will be closed. Any idea?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Did you wipe?
Works like a charm, thank you so much!
Sent from my GT-P7100 using xda premium
derwahreehlers said:
I get an error in cwm-recovery if I try to flash ROM.
It says I have the wrong device.
I think I have to flash Stock ROM 3.0.1 and than 4.0.3!
Other ideas?
Is that the wrong or right way?
Click to expand...
Click to collapse
Did you flash the new recovery? If you did not it will not allow you to install.
Ok works so far for me. It feels smooth and finaly it say's gt-p7100 and not 7500 in the xda app and system info
Sent from my GT-P7100 using XDA App
algzed said:
Hi Isi,
Just some quick questions.
What to do to return to 3.2 ? - Just flash 3.2 rom ?
Aplications from samsung like Email etc what happens to them ?
Can one install them ( samsung Email etc ) from titanium backup or they dont work in ICS?
Isi can i link new files as an alternative download place ?
Thanks
Click to expand...
Click to collapse
Yes, you can go back to 3.2 if you follow the the instructions in the 3.2 thread.
This is stock Android, no Samsung APPS
I do not think you should make alternate available at the moment, it could change often. Let us get one "stable" version first.
Yes i did. Any other idea?
isimobile said:
Did you wipe?
Click to expand...
Click to collapse
Sent from my GT-P7100 using XDA App
I have a big problem...
I have a boot loop, I can not use adb, I don't know how I go to recovery manually and suddenly my fastboot doesn't work :'(
HELP!
derwahreehlers said:
I have a big problem...
I have a boot loop, I can not use adb, I don't know how I go to recovery manually and suddenly my fastboot doesn't work :'(
HELP!
Click to expand...
Click to collapse
fastboot boot c:\path\to\recovery.img
You can always get into fastboot mode. Hold the power button for a while. When the screen goes black, hold volume down too
Sent from my GT-P7100 using xda premium
ramonams said:
fastboot boot c:\path\to\recovery.img
You can always get into fastboot mode. Hold the power button for a while. When the screen goes black, hold volume down too
Sent from my GT-P7100 using xda premium
Click to expand...
Click to collapse
Sure but my PC doesn't see the fastboot device and YES the driver is installed.

[mod][BETA][PATCH] ROM_PATCH V1.2 for ics- full freedom -

I can continue the project if i get proper feedback from you
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work for this patch
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* VIBRANT patch:- http://db.tt/j3ZIdudZ (12mb)
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q.:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for vibrant
Click to expand...
Click to collapse
Q.:- can I flash another vibrant ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or I897
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
just in case
Jumped quick on that one!
beta tester requesting you to try this patch please do that
is this just for I9000 roms or can we use others? is so which ones?
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
Well technically vibrant can flash i9000 roms with some minor issues like key mapping, sound path and gps.
This patch seems to take care of it (in a convenient way) and since ICS kernels seem to play nice it should work for all ICS roms.
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
actually almost all variants but i am not sure, you can try every variants rom and write it here that working or not, so I can update the op with some info
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Lochman79 said:
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
can you paste the link and what you flash first
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Lochman79 said:
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Did it just say like Installation Aborted in the Recovery? Or what else happened?
Did you make sure its not a bad download.
Get the .zip on PC and open it with winRAR, if its corrupted/bad download it'll give you errors, if it says nothing, its good and the patch probably needs working on.
Thats really weird too, it should've just flashed right on and even if the patch didn't work, it should've booted up and the capac. buttons would've been flipped etc. no signal (kernel) those would've been issues that are known.
This is amazing documentation.
Sent from my SGH-T989 using xda premium
I can't check the download as I have already deleted it, but I did check that it was a full download. Usually if it is a bad download, it will not be the correct mb size. And I forget exactly what it said when it failed...sorry. Has anyone else tried?
Sent from my SGH-T959 using XDA
sorry but it is not the fault of patch if the rom is not flashing
the patch will just install a working kernel and keylayout files and some minor tid-bits
did you install the rom with twrp kernel which is in the patch and also patch should be flashed again after flashing the rom
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Lochman79 said:
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Fine! I'll do it!
Haha but results may come later today.
Going to test on Infinitum 2.2
I'll update as soon as it boots up (hopefully).
Edit:
I got a Status 7 error
Seems like you can't flash something I9000 on a T959 recovery?
Sent from my SGH-T959 using xda premium

[COLLECTIONS][MIRROR] Official Firmwares, Kernels, Modems, Bootloaders

Official Firmwares, Kernels, Modems, Bootloaders​
Hey guys! Since I got quite a decent connection in my university (uploading 500++MB takes only 5 minutes? lol), I decided to mirror the official firmwares etc. on Android File Host so that people can get better speeds than Hotfile...so here goes...
How this works:
1. If there is a new firmware, I will upload it ASAP.
2. When there is anyone else making a mirror, just leave a post and I will add the link to the OP.
3. If there is any request, post it here too and I might fulfill it if I got the time, or if someone else can help, then it will be better.
3. That's all! This will be community maintained, so dead links can be revived easily without depending on a single person only. ​
ODIN:
You shouldn't be attempting any mods to your phone at all if you do not have this! Pit file included in this package too (use it to fix unflashable phones). Get it here:
Odin3-v1.85.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176348​
Firmwares:
ICS:
4.0.3
I9100GDXLP6_I9100GOLBLP6_XME.zip [Malaysia]
Download: http://www.androidfilehost.com/?fid=9390362690511175720
4.0.4
I9100GXXLPY_I9100GDBTLP3_DBT.zip [Germany]
Download: http://www.androidfilehost.com/?fid=9390362690511175722​
JB:
4.1.2
I9100GXXLSR_I9100GXEFLSR_XEF.zip [France]
Download: http://www.androidfilehost.com/?fid=9390362690511175718
I9100GXXLSR_I9100GDBTLS1_DBT.zip [Germany]
Download: http://www.androidfilehost.com/?fid=9390362690511175727
I9100GXXLSR_I9100GATOLS1_ATO.zip [Open Austria]
Download: http://www.androidfilehost.com/?fid=9390362690511175738
I9100GDDLS3_I9100GODDLS3_INU.zip [India]
Download: http://www.androidfilehost.com/?fid=22901594685178712
Mirrors:
http://www.mediafire.com/?zs1yltukbg32210 (thanks to stef1004)
http://urlz.so/l/mu-0pq8feal/ (thanks to arinsms)
http://uptobox.com/5eoxb68kmjy5 (thanks to arinsms)
http://www.mediafire.com/?eu64azp46mb4gsj (thanks to arinsms)
I900GDXLS8_XEV_Leaked.rar [Vietnam][Leaked]
Download: http://www.androidfilehost.com/?fid=22964708692722271
Mirror: http://www.mediafire.com/?thoh1nme6phoa (thanks to @NhatanhChampion)
I9100GDXLS8_I9100GOLBLS8_XME.zip [Malaysia]
Download: http://www.androidfilehost.com/?fid=22979706399752873
I9100GDXLS8_I9100GOLBLS8_XVV.zip [Vietnam]
Download: http://www.androidfilehost.com/?fid=22979706399755491​
Kernels
ICS:
4.0.3
I9100G_DXLP6_Kernel.tar
Download: http://www.androidfilehost.com/?fid=9390362690511175725​JB:
4.1.2
I9100G_XXLSR_Kernel.tar
Download: http://www.androidfilehost.com/?fid=9390362690511175724
I9100G_DDLS3_Kernel.tar
Download: http://www.androidfilehost.com/?fid=22901594685178753
I9100G_DXLS8_Kernel.tar
Download: http://www.androidfilehost.com/?fid=22964708692722270​
More to be added...
How to flash in ODIN:
1. Select the related .tar file under PDA section.
2. Only tick Auto Reboot and F. Reset Time.
3. Start flashing.
4. Done.
Modems
GT-I9100G_KK1.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176321
GT-I9100G_K2J.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176322
GT-I9100G_KL3.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176323
GT-I9100G_LP5.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176324
GT-I9100G_LP6.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176325
GT-I9100G_LP7.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176326
GT-I9100G_LPG.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176329
GT-I9100G_LPE.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176330
GT-I9100G_LPN.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176331
GT-I9100G_LSP.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176332
GT-I9100G_LPV.zip
Download: http://www.androidfilehost.com/?fid=9390362690511176335​
Which to use:
Easiest way: Test all and find out which suits you best! Phones are designed to be portable anyway...
Harder way: Find out which baseband comes with which firmware and use that (tedious process, I can't possibly test all and list them out)...
How to use:
1. All the above are .zip files. They are not for ODIN but for recovery.
2. Any recovery will do (stock, CWM, TWRP etc)
3. For custom recoveries, just place in your external/internal storage and flash like usual.
4. For stock 3e recovery, follow this:
- Place the zip in your external sdcard.
- Power off your device COMPLETELY.
- Boot into recovery mode by pressing Volume up + Home + Power buttons simultaneously.
- Navigate to "apply update from external storage" using the volume buttons.
- Select it by pressing the Power button.
- Select the zip.
- Wait for it to finish and navigate up (select "../").
- Select "reboot system now".
4. Done.
Bootloaders
GB Bootloader: http://www.androidfilehost.com/?fid=9390362690511176336​ICS Bootloader: http://www.androidfilehost.com/?fid=9390362690511176338​JB Bootloader: http://www.androidfilehost.com/?fid=9390362690511176337​
What are these? Well, bootloader is the layer that runs before running the kernel and loads into system. In order to reset your flash counter/remove warning triangle with a USB jig, you need a GB bootloader.
To flash AOSP ROMs, you need an ICS bootloader.
To solve multi coloured boot screen issues in 4.2.x AOSP ROMs, flash a JB bootloader.
But for stock ROMs, it is better if you use a GB bootloader for GB ROMs, ICS bootloader for ICS ROMs and JB bootloader for JB ROMs...
How to flash in ODIN:
1. Select the related .tar file in ODIN under BOOTLOADER section.
2. Tick Phone Bootloader Update (DO NOT select Re-Partition)
3. Start flashing.
4. Done.
Ryu just curious to know can i flash 4.2 kernel on team xd rom????
Cos team xd is 4.1 so will it be compatible????
And the 4.2kernel wch u put up is stock right????
Sent from my GT-I9100G using xda app-developers app
Sorry, typo, it is 4.1.2
Ryuinferno said:
Sorry, typo, it is 4.1.2
Click to expand...
Click to collapse
Thnx for quick rep......
And ya is it the same stock kernel wch was put up on team xd thread i think......
Sent from my GT-I9100G using xda app-developers app
---------- Post added at 10:35 PM ---------- Previous post was at 10:25 PM ----------
And sorry for troubling one more doubt can i flash any of the modems or shld i flash my country specific modem?????
Like am from india and i think lp7 is for india,so shld i flash lp7 only or ny modem can be flashed?????
Please bear me......
Sent from my GT-I9100G using xda app-developers app
Any other modems can be flashed...it will work but you might get weaker signal...you may experiment with them a bit...
Ryuinferno said:
Any other modems can be flashed...it will work but you might get weaker signal...you may experiment with them a bit...
Click to expand...
Click to collapse
Ok thnx bro definitely will try......
Sent from my GT-I9100G using xda app-developers app
@Ryu
Cool man. Thanx for the thread
Wow...what a hit...not even a day and the Germany firmware got 20++ downloads...
Yeah..good work Ryu..:thumbup::thumbup:
Would better its be a sticky thread, right?..
Sent from my GT-I9100G
Ryuinferno said:
Wow...what a hit...not even a day and the Germany firmware got 20++ downloads...
Click to expand...
Click to collapse
Yeah
This thread is awesome
Should be stikies
Infinite96 said:
Yeah
This thread is awesome
Should be stikies
Click to expand...
Click to collapse
+1
Sent from my GT-I9100G using xda premium
4.1.2 are stock or AOSP..?
Sent from my GT-I9100G using xda premium
fuadhamzah73 said:
4.1.2 are stock or AOSP..?
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
This is StockROM .
Infinite96 said:
This is StockROM .
Click to expand...
Click to collapse
Thanks
Sent from my GT-I9300 using Tapatalk 2
Ryu...question...now i use your blazing lite rom (4.0.3). If i want to use jb 4.1.2 firmware (ex. Germany) what step should i take 1st..?
1) Flash jb bootloader
2) Flash firmware 4.1.2
3) Flash my country modem (malaysia)
Are these step correct..?
Sorry Ryu my english not good n hope u can guide me...thanks
Sent from my GT-I9300 using Tapatalk 2
fuadhamzah73 said:
Ryu...question...now i use your blazing lite rom (4.0.3). If i want to use jb 4.1.2 firmware (ex. Germany) what step should i take 1st..?
1) Flash jb bootloader
2) Flash firmware 4.1.2
3) Flash my country modem (malaysia)
Are these step correct..?
Sorry Ryu my english not good n hope u can guide me...thanks
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
No need to flash jb bootloader coz its already come along with this firmware. Make a clean wipe and use odin to flash..Yes, u can flash modem if u want to..
Lets phone boot first then move modem to externel sd and flash..
All the above step if u want to flash stock GT-I9100G odex rom..
Sent from my GT-I9100G
Thanks for quick reply...
Sent from my GT-I9300 using Tapatalk 2
---------- Post added 26th March 2013 at 12:25 AM ---------- Previous post was 25th March 2013 at 11:57 PM ----------
CRY1S1S said:
No need to flash jb bootloader coz its already come along with this firmware. Make a clean wipe and use odin to flash..Yes, u can flash modem if u want to..
Lets phone boot first then move modem to externel sd and flash..
All the above step if u want to flash stock GT-I9100G odex rom..
Sent from my GT-I9100G
Click to expand...
Click to collapse
But all the firmware file are zip..can i flash it thru cwm..? Or i change that zip file to tar..?
Sent from my GT-I9300 using Tapatalk 2

Mr. Parkinson's Droid Razr HD Utility

So Matt's Utility is now released (In fact it's at the bottom of my thread!)
Why should I continue updating?
Because, you know, its fun!
If youre looking for the DroidHD Utility, its been moved! Use this as a changelog only. To download the new utility, go to this link: http://forum.xda-developers.com/showthread.php?t=2241788
This is my own little utility I patched together after seeing that Matt hasn't released a Utility for the Droid Razr HD under 9.16.6.
The utility does a lot of neat stuff, which I will list below.
1) Fastboot Restore to Stock 4.1.2
-This program will restore your phone to Verizon's stock 4.1.2 Jelly Bean release. Only use this on XT925/926 devices.
2)Fastboot Restore to Stock 4.1.2(Don't Flash Recovery)*
-This program will restore your phone to Verizon's stock 4.1.2 Jelly Bean release, without flashing the stock recovery.. Only use this on XT925/926 devices.
3) Root your Phone (Motochopper Method)
-Does what it says on the tin. Roots your phone. It works on 4.1.2 devices and below!
4) Install Safestrap 3.05
-Installs Safestrap. Easy.
5) Install OTA Rootkeeper
-If you don't already have it, this program will install OTA Rootkeeper, incase a subsequent update gets rid of the motochopper root exploit.
6) Flash TWRP 2.5.0.0*
-Flashes TWRP Custom Recovery to your phone. REQUIRES UNLOCKED BOOTLOADER.
7) Install Titanium Backup
-This program installs Titanium Backup incase for whatever reason, you would rather install it from here as opposed to Google Play.
8) Unlock your Bootloader (Motopocalypse Method)
-This program unlocks your bootloader. BE CAREFUL WHEN USING THIS PROGRAM.
9) Check if your bootloader is unlocked*
-Just includes a step by step guide to check if your bootloader is unlocked. This feature will eventually go automated.
*Only available in 1.21
Downloads are located in the second post, along with their respective changelogs.
I only have 50GB in that Mega account, so only expect me to back up about 50 releases (If I even go that far!)
Its safe, trust me. If you don't, I'm attaching the "source code" for the original 1.0 .bat file.
I hope you try it, I spent three hours on it!
Cheers!
Click to expand...
Click to collapse
Dont use this one! Use this one here: http://forum.xda-developers.com/showthread.php?t=2241788
Version 1.21 Is now live!
1.21 Changelog:
-Fixed a dangerous error where the stock recovery image wouldn't flash when restoring.
-Added the "Flash TWRP 2.5 Custom Recovery" feature.
-Added an option to not flash stock recovery image when using option 1.
-Added a step by step guide to see if your bootloader is unlocked.
-When restoring stock ROMs, you will now have the option to delete userdata.
1.1 Changelog:
-Removed the "Push Eclipse" option from the utility.
1.01 Changelog:
-Fixed a typo in the main menu.
-Changed the wording of fastboot option.
-Made a change to the Eclipse/GApps program.
1.0 Changelog:
-Initial Release.
Download 1.21 Here:
https://mega.co.nz/#!JYZxCJLL!ZT5eVGToF0WPlDJ7EW4QCkbP1PkJrLIRxb0c2FZkhrE
Download 1.1 Here:
https://mega.co.nz/#!1N4gxZJR!a7FTI1TnRh97ZzxzrDHGMU_j23Be0ummQXE4evq-NCo
Download 1.01 Here:
https://mega.co.nz/#!FIIgHTpY!fADGtFHyBqiQ-yNqzd5fJ2hE33I9oAyR32Xji6RPm9Y
Download 1.0 Here:
https://www.dropbox.com/s/8kvkylzglikytxy/DroidHDUtility 1.0.zip
Click to expand...
Click to collapse
Looks AWSM! Wat eclipse??
Sent from my DROID RAZR HD using xda premium
Eclipse is a relatively popular ROM for various devices.
Sent from my DROID RAZR HD using xda app-developers app
Anyone tried the Eclipse rom on the HD yet? I did some quick googling and didn't find any hd eclipse forums. Would love to know how it runs.
Sent from my DROID RAZR HD using xda app-developers app
Mr.Parkinson said:
Eclipse is a relatively popular ROM for various devices.
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
Yes ik that but didn't believe it cuz I didn't see a thread for it anywhere! Is this brand new? Is it a port or fully working?? Wat version? 4.1.2? So many questions ig I'll have to try it out in the morning..it wud be greatly appreciated if you'd start a thread so I don't have to download this huge tool just for the ROM...
Sent from my DROID RAZR HD using xda premium
I packed the ROM in the utility after doing some investigation, some people saying it was working for XT925/926. after attempting to install it in safe strap 3.05, I got an error saying "no OS was installed!". Due to my current situation, i am unable to test it in CWM or TWRP, but if I receive word that it does not work, them I will be removing it in an update to the package.
Sent from my DROID RAZR HD using xda app-developers app
The Eclipse ROM you included appears to be for "toro" which is the Samsung Galaxy Nexus.
Maybe a little de-rail for testing my Utility?
http://batakang.com/ftp/DROID_RAZR_HD/DROID_RAZR_HD_Utility_1.20.zip
Windows Mac and Linux.
mattlgroff said:
Maybe a little de-rail for testing my Utility?
Click to expand...
Click to collapse
What does that mean?

[ROM][6.0.1] Stock.MMB29M.N910VVRU2CQC1 [04/21/2017]

Stock.MMB29M.N910VVRU2CQC1​
Stock TWRP flash-able ROM for a stable base to build your own ROM or for those who may want a completely stock experience.
- Stock.MMB29M.N910VVRU2CQC1 <-- DOWNLOAD LINK
---- Completely Stock for anyone who may need a good working base to put your own rom together. (Just Please give credit where its due!) Or Those who may want a completely stock experience.
---- All Bloat is untouched
---- Removed Knox
---- DeoDexed
---- Root script included <-- Removed root script. Use SuperSU TWRP flashable zip to root
---- Compressed into metadata format not .dat so you can easily modify anything in the system folder
**Below are Odin Flash-able files for upgrading. They do not include the aboot.mbn file so your bootloader will not re-lock.**
---- VRU2CQC1_modems
---- VRU2CQC1_bootloader_NoAboot
---- VRU2CQC1_NoAboot
***DON'T FORGET TO HIT THE THANKS BUTTON!!***​
XDA:DevDB Information
[ROM][6.0.1] Stock.MMB29M.N910VVRU2CQC1, ROM for the Verizon Samsung Galaxy Note 4
Contributors
PaulPizz
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910VVRS2CQC1
Version Information
Status: Stable
Stable Release Date: 2017-03-04
Created 2017-03-04
Last Updated 2017-04-22
I'd hit thanks a billion times over if possible, @PaulPizz. You're an invaluable contributor to XDA, and as a Samsung Galaxy Note 4 user, I am humbly grateful at your continued development and endeavors upon our device. I graciously praise you and wish I had actual re$ource$ I could actively donate, as well. Sadly, at this time, I must remain limited to verbal gratitude.
caniswesley said:
I'd hit thanks a billion times over if possible, @PaulPizz. You're an invaluable contributor to XDA, and as a Samsung Galaxy Note 4 user, I am humbly grateful at your continued development and endeavors upon our device. I graciously praise you and wish I had actual re$ource$ I could actively donate, as well. Sadly, at this time, I must remain limited to verbal gratitude.
Click to expand...
Click to collapse
Thank you!
You wouldn't by chance have a way to get the OTA update file would you? I have a complete stock note 4 but only able to update to CPF3 as I can't find OTA update files.
Thanks for any help.
Sent from my SM-N910V using XDA Labs
macgyver40 said:
You wouldn't by chance have a way to get the OTA update file would you? I have a complete stock note 4 but only able to update to CPF3 as I can't find OTA update files.
Thanks for any help.
Sent from my SM-N910V using XDA Labs
Click to expand...
Click to collapse
No I dont have the OTA files. Listed above are odin flash-able files. you can easily update with odin...
PaulPizz said:
No I dont have the OTA files. Listed above are odin flash-able files. you can easily update with odin...
Click to expand...
Click to collapse
I could easily update if I had access to a PC. I don't own one and no one is willing to let me borrow one for a few days because they either think what I am doing is illegal or they don't want to part with their computer for a few days since the unlock process can be tricky.
Great phone stuck locked. If I didn't need verizon I would get a GSM phone in a heart beat.
Sent from my SM-N910V using XDA Labs
Have you abandoned the PaulPizz ROM? I liked your customized version.
FMXP said:
Have you abandoned the PaulPizz ROM? I liked your customized version.
Click to expand...
Click to collapse
I wouldn't say abandoned.. I've just been very busy lately. I've had no time at all.. And I'm not using the note 4 anymore.. I'll try to get a new build out soon.. ?
PaulPizz said:
I wouldn't say abandoned.. I've just been very busy lately. I've had no time at all.. And I'm not using the note 4 anymore.. I'll try to get a new build out soon..
Click to expand...
Click to collapse
Great to hear! Thanks very much!
@PaulPizz very amazing work ... id like to ask ... in your opinion ... would running this rom for the n910v help to make EFIdroid work? since flashing roms meant for the F or G variant it changes the model in the buildprop i think its called . OR i might have answered my own question i can change the buildprop and see if that hellps ... still want to take this ROM for a spin
hmmm flashed this and I have NO wifi
**hello** .... **hello** ... is this thing on? ... ANYONE ON?
Neuken69 said:
hmmm flashed this and I have NO wifi
Click to expand...
Click to collapse
did you update your aboot to MM 6.0.1? if not this must be done because the wifi driver is in the aboot partition. this will require re-unlocking your bootloader...
PaulPizz said:
did you update your aboot to MM 6.0.1? if not this must be done because the wifi driver is in the aboot partition. this will require re-unlocking your bootloader...
Click to expand...
Click to collapse
@PaulPizz thanks for the reply ... I honestly don't remember what I have done ... but if im reading you correctly and I flash the aboot you have in the OP I will have to re-unlock my bootloader? im restoring a backup right now so I cant even confirm but I think its CJQ2 no that doesn't sound right I tried flashing a tmobile 7.1.1 and it failed
CQB2 is what i have
Can i flash this rom on my note 4 sm-n910v 5.0.1?
Banty448 said:
Can i flash this rom on my note 4 sm-n910v 5.0.1?
Click to expand...
Click to collapse
You will have wifi issues. You need to update your aboot first..
Ok... Which custom rom is fully supported for my device sm-n910v 5.0.1? Can i flash cynogen 14 unofficial?
how to root N910VVRS2CQB2?:angel:
Is there any other kernels to use for stock rom?
Hello @PaulPizz First off I want to thank you for this completely stock ROM. I flashed it last night just so I could have a stock backup. One thing I noticed though which is great is that my mms messages seem to be sent over wifi. I went into settings/about phone/status and and under mobile network type it said IWLAN. I was connected to my home wifi and mms messages sent in like 1 second. It was awesome. Calls and everything still worked correctly also. Sorry for so long of a post, but since I I use Emotion OS and NSeven as my DD's, I was wondering if you knew how I could get mms to work like that on those ROM'S Thanks for reading

Categories

Resources