When I make a call using Tmo network, the person on the other end cannot hear me. I press the dialpad, and they hear an ugly click static noise. However, I can use the sound recorder and mic works fine. I can even make Google Hangouts calls (cam and no cam) and the other party hears me.
The phone is maybe about a month old. Over the past week, I had the problem but a restart of the phone would fix it. Now its stuck w/ the mic not working.... I restarted the device 5 times, full shut down, take battery out and then back in. Now it seems stuck w/ the mic not working over Tmo calls.
stevedawg85 said:
When I make a call using Tmo network, the person on the other end cannot hear me. I press the dialpad, and they hear an ugly click static noise. However, I can use the sound recorder and mic works fine. I can even make Google Hangouts calls (cam and no cam) and the other party hears me.
The phone is maybe about a month old. Over the past week, I had the problem but a restart of the phone would fix it. Now its stuck w/ the mic not working.... I restarted the device 5 times, full shut down, take battery out and then back in. Now it seems stuck w/ the mic not working over Tmo calls.
Click to expand...
Click to collapse
I figure it only effect wifi calling - any idea why? On a similar note, i cannot send/receive sms over wifi either. Once I connect to TMo cellular network, mic works and sms work.
any input on this one?
Related
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
brianbelfast said:
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
Click to expand...
Click to collapse
M8. I don't think you're on your own on this one. I have the same problem ...or similar. My phone pairs OK but drops the blue tooth connection usually on audio but quite often altogether. Re-pairing is a pain in the A$$. It's definitely a phone issue as I have the older qtek and a nokia that work with my kenwood system without a hitch but pair up the diamond and I'm pulling my hair out after 5 minutes.
I've tried the latest stable radio, setting pin code to 0000 & also turning off security but it still drops connection after an outgoing or incoming call.
Does anyone have a fix for this?
...and jetware 1.3 doesn't solve this either. Installed it the other day and pretty much the same ...audio is fine until a call is terminated and then it drops A2DP but sometimes stays connected on telephone. Other times both drop off!
bt stack
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
My phone does that weird thing too where I couldnt hear the other person on line. I have manage to found a quick fix for it tho.
Solution 1: During the call (when you notice you cant hear the other person), press the middle circle button (which will activate the screen if dimmed out), then press the speaker icon. This allows you to continue the conversation on speaker with the other person on line without having to soft/hard reset.
Solution 2 (works sometimes): During the call, reduce the volumn, wait a secnd or two, then raise it again.
Bt3030 - Shb6100/7100
Have the same problem with Philips shb7100 and shb6100. i also have tried the Jabra BT3030.
I used and test them on a Tyten and wizard no problem at all.
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
ADD+ said:
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
Click to expand...
Click to collapse
I have the exact same model (kenwood dnx8220bt and XDA ignito (diamond), same problem where everything is okay but when you go into the contacts menu and try to make a call, BT connection either drops or nothing happens when you try to make the call.... this is a joke.... how can my old HTC P3300 work with it without a problem and this newer Diamond flop like a fish...
any updates or news??
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
I join the list - having problems with my xcarlink which used to work with my P3300
Tried using A2DP Toggle which helped on the artemis but seems to have NO effect at all on Diamond
The Diamond does connect flawlessly to my jabra earpiece and my Sony ericsson bluetooth speaker
ninja_pimp said:
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
Click to expand...
Click to collapse
I have the same problem. Sent my HTC back twice for repair but still no solution. The first time they didn't found the problem, the second time they replaced the speaker.
What did they do with your phone to fix it?
According to this thread http://forum.xda-developers.com/showthread.php?t=431826 it is a hardware issue. The phone needs to go back to the supplier as it is faulty.
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
Hello,
I got myself a Huawei P20 Pro and am fairly satisfied with it atm. But there is one issue I have now and that is that apps like Line, Teamspeak 3 and even the phone app is using the wrong microphone when using a Bluetooth headset or even an USB C -> 3,5 mm headset.
One thing that I do remember now that I am writing this, is that I have Boldbeast Recorder installed, which is a call recording app. But I never had these issues with my Samsung S7 Edge.
Anyone else having similar issues?
Update;
I made a call earlier today and had these issues, but using the handset itself. But after a while even calling seems to not be working.
I did a quick reboot and now, huzzaa, everything works again...
I have Huawei P20 Pro and I use Boldbeast call recorder. It works fine with the handset as well as work Bluetooth
Same problems and more....
Alle090 said:
Hello,
I got myself a Huawei P20 Pro and am fairly satisfied with it atm. But there is one issue I have now and that is that apps like Line, Teamspeak 3 and even the phone app is using the wrong microphone when using a Bluetooth headset or even an USB C -> 3,5 mm headset.
One thing that I do remember now that I am writing this, is that I have Boldbeast Recorder installed, which is a call recording app. But I never had these issues with my Samsung S7 Edge.
Anyone else having similar issues?
Update;
I made a call earlier today and had these issues, but using the handset itself. But after a while even calling seems to not be working.
I did a quick reboot and now, huzzaa, everything works again...
Click to expand...
Click to collapse
I have the same problems with my P20 Pro! I can't make calls after a while with apps like messenger och WhatsApp, and after a while even audio when recording video I gone! A restart works for a while but then back to same behavior! This is really bad if they want to compete on the high end market... Hoping for a system update that fixes this ASAP!
anilhk said:
I have Huawei P20 Pro and I use Boldbeast call recorder. It works fine with the handset as well as work Bluetooth
Click to expand...
Click to collapse
Hmm, I think it happens for me whenever I use my Bluetooth headset (Jabra EVOLVE 65 MS). After I stop using it and go back to my USB-C -> 3,5mm headset it has that weird bug again.
popeppel said:
I have the same problems with my P20 Pro! I can't make calls after a while with apps like messenger och WhatsApp, and after a while even audio when recording video I gone! A restart works for a while but then back to same behavior! This is really bad if they want to compete on the high end market... Hoping for a system update that fixes this ASAP!
Click to expand...
Click to collapse
For me it all starts working after a reboot :s
I got 3 days more to decide whether to keep it or not :s
So, I ended up returning my phone and got myself a Samnsung S9+ DS....
I am sorry!
I said earlier I don't have problem, but I do have problems with phone calls. The other party cannot hear me well. Maybe it is something to do with using Boldbeast. It records well, but maybe it interferes with phone calls. Can someone confirm this?
I'm regularly having the same issue.. Occasionally the other person at the start of a call can't hear me..
I have only yet encountered the issue with actual phone calls not whatsapp voice calls etc..
So I'm wondering if it's perhaps a VoLTE bug?
Or the only other thing I can think of is that perhaps the USB-C to 3.5mm headphone adapter plays around with the audio pipeline and doesn't reset.. Just speculation
Microphone error
Same to me here... Is there any solution? My friend can't hear me at all on the phone call... But when I playing PUBG with microphone enable they said my voice just like cartoon....
Private space is the key. I guess
Switching to private space.. ans switching back.. make u lose mic in calls.
I am sure of that.
There seems to be a few causes
Potentially:
1/ going into private space
2/ after using usb-c headphone adapter
3/ after using Bluetooth Audio
Still wondering if it's a VoLTE thing or if it also happens with whatsapp during a microphone. If it's only effecting phone calls and not apps that use the microphone that would point to volte or some other part of the call pipeline rather than the general audio pipeline
The only solution I have is to restart the phone.. That works
..
It seems like a firmware issue connected to the mic. Hope this gets resolved soon.
Same issue here.
I tried turning off VoLTE and WIFI calling. No luck.
This is really giving me a hard time. I can't make calls anymore.
People just don't hear me.
Do you guys have the dual SIM version? How many cards installed?
I removed the Sim in slot 1 yesterday and when I slid the tray back in the phone showed an update for the provider settings (and provider apps etc.)
I run the update and restarted the phone. Some provider apps were installed with the update.
--> first call went without problems.
--> maybe 2 SIM cards interfere?
--> maybe the provider update needed to be forced (by removing one of the SIM cards)
--> maybe it was just the reboot.
I'll keep you posted.
4 calls since last post (no restart since).
--> procedure might have done the trick.
Has anyone managed to fix the problem with update?
No more problems?
im having the same problem, i tried restarting and formating the mobile.
Fixes it temporary only.
Do you have two sims installed or just one? Try taking one out if you have two (see above) to trigger a provider update.
Ok, I have two sims in the phone. But now I deny Google permission for the microphone (I don't use "ok Google" to wake up), and never happens again, microphone works fine all the time.
Sent from my CLT-L29 using Tapatalk
I have exactly the same issue can hear everyone else crystal clear just they can't hear me
I have a Nokia 9PV (TA-1082) and a few months ago the microphone started acting up. When I make or receive a phone call, the other person hears nothing but static. It may have started after the June 2019 update. I've read that this is a common software issue with android phones but I can't find a solution. When I record video, the microphone works properly, with no static recorded. If I test the microphone using a voice recorder app, it records nothing but static. If I make/receive a call using my bluetooth headset, it works fine. I received the August 2019 update today and it hasn't helped the situation.
I purchased the phone in the US and have been using it in Canada on the Rogers network. Everything else seems to work fine except for the microphone. Has anybody else had this problem with the N9PV?
Yes i replaced the phone but still caused by one of the third party programs, when you reboot the phone in safe mode it works ok. any program using the Mic or phone could be causing ie messenger, skype, viber, whats app.
looking for a solution also
All of a sudden, my microphone does not work in a call. Regardless of if I originate the call or answer a call, the other party can not hear me. Works fine through speaker phone or Bluetooth. I've searched as much as I can online for a fix, but no results. So far I have done the following:
-Installed a third party phone app
-Tried safe mode
-Tried to repair in the Xperia Companion app on my PC (actually made things worse - couldn't make or receive calls)
-Full restore to factory defaults (fixed the call issues, but not the mic issue)
The tests in the support app fails to hear a frequency change.
Since the microphone works in speak phone, I assume this is still a software issue and not a hardware issue (unless the speakerphone uses a different mic).
I'm stuck and could use some advice.
Thanks
I have the same problem for several months
I have the impression that I had this problem since I put underwater
the only solution I found is to put in loudspeaker or use headphones